Html程序
|
2358行
|
141.92 KB
<html><body>
<style>
body, h1, h2, h3, div, span, p, pre, a {
margin: 0;
padding: 0;
border: 0;
font-weight: inherit;
font-style: inherit;
font-size: 100%;
font-family: inherit;
vertical-align: baseline;
}
body {
font-size: 13px;
padding: 1em;
}
h1 {
font-size: 26px;
margin-bottom: 1em;
}
h2 {
font-size: 24px;
margin-bottom: 1em;
}
h3 {
font-size: 20px;
margin-bottom: 1em;
margin-top: 1em;
}
pre, code {
line-height: 1.5;
font-family: Monaco, 'DejaVu Sans Mono', 'Bitstream Vera Sans Mono', 'Lucida Console', monospace;
}
pre {
margin-top: 0.5em;
}
h1, h2, h3, p {
font-family: Arial, sans serif;
}
h1, h2, h3 {
border-bottom: solid #CCC 1px;
}
.toc_element {
margin-top: 0.5em;
}
.firstline {
margin-left: 2 em;
}
.method {
margin-top: 1em;
border: solid 1px #CCC;
padding: 1em;
background: #EEE;
}
.details {
font-weight: bold;
font-size: 14px;
}
</style>
<h1><a href="servicecontrol_v1.html">Google Service Control API</a> . <a href="servicecontrol_v1.services.html">services</a></h1>
<h2>Instance Methods</h2>
<p class="toc_element">
<code><a href="#allocateQuota">allocateQuota(serviceName, body, x__xgafv=None)</a></code></p>
<p class="firstline">Attempts to allocate quota for the specified consumer. It should be called</p>
<p class="toc_element">
<code><a href="#check">check(serviceName, body, x__xgafv=None)</a></code></p>
<p class="firstline">Checks an operation with Google Service Control to decide whether</p>
<p class="toc_element">
<code><a href="#endReconciliation">endReconciliation(serviceName, body, x__xgafv=None)</a></code></p>
<p class="firstline">Signals the quota controller that service ends the ongoing usage</p>
<p class="toc_element">
<code><a href="#releaseQuota">releaseQuota(serviceName, body, x__xgafv=None)</a></code></p>
<p class="firstline">Releases previously allocated quota done through AllocateQuota method.</p>
<p class="toc_element">
<code><a href="#report">report(serviceName, body, x__xgafv=None)</a></code></p>
<p class="firstline">Reports operation results to Google Service Control, such as logs and</p>
<p class="toc_element">
<code><a href="#startReconciliation">startReconciliation(serviceName, body, x__xgafv=None)</a></code></p>
<p class="firstline">Unlike rate quota, allocation quota does not get refilled periodically.</p>
<h3>Method Details</h3>
<div class="method">
<code class="details" id="allocateQuota">allocateQuota(serviceName, body, x__xgafv=None)</code>
<pre>Attempts to allocate quota for the specified consumer. It should be called
before the operation is executed.
This method requires the `servicemanagement.services.quota`
permission on the specified service. For more information, see
[Google Cloud IAM](https://cloud.google.com/iam).
**NOTE:** the client code **must** fail-open if the server returns one
of the following quota errors:
- `PROJECT_STATUS_UNAVAILABLE`
- `SERVICE_STATUS_UNAVAILABLE`
- `BILLING_STATUS_UNAVAILABLE`
- `QUOTA_SYSTEM_UNAVAILABLE`
The server may inject above errors to prohibit any hard dependency
on the quota system.
Args:
serviceName: string, Name of the service as specified in the service configuration. For example,
`"pubsub.googleapis.com"`.
See google.api.Service for the definition of a service name. (required)
body: object, The request body. (required)
The object takes the form of:
{ # Request message for the AllocateQuota method.
"allocationMode": "A String", # Allocation mode for this operation.
# Deprecated: use QuotaMode inside the QuotaOperation.
"serviceConfigId": "A String", # Specifies which version of service configuration should be used to process
# the request. If unspecified or no matching version can be found, the latest
# one will be used.
"allocateOperation": { # Represents information regarding a quota operation. # Operation that describes the quota allocation.
"quotaMetrics": [ # Represents information about this operation. Each MetricValueSet
# corresponds to a metric defined in the service configuration.
# The data type used in the MetricValueSet must agree with
# the data type specified in the metric definition.
#
# Within a single operation, it is not allowed to have more than one
# MetricValue instances that have the same metric names and identical
# label value combinations. If a request has such duplicated MetricValue
# instances, the entire request is rejected with
# an invalid argument error.
{ # Represents a set of metric values in the same metric.
# Each metric value in the set should have a unique combination of start time,
# end time, and label values.
"metricValues": [ # The values in this metric.
{ # Represents a single metric value.
"moneyValue": { # Represents an amount of money with its currency type. # A money value.
"nanos": 42, # Number of nano (10^-9) units of the amount.
# The value must be between -999,999,999 and +999,999,999 inclusive.
# If `units` is positive, `nanos` must be positive or zero.
# If `units` is zero, `nanos` can be positive, zero, or negative.
# If `units` is negative, `nanos` must be negative or zero.
# For example $-1.75 is represented as `units`=-1 and `nanos`=-750,000,000.
"units": "A String", # The whole units of the amount.
# For example if `currencyCode` is `"USD"`, then 1 unit is one US dollar.
"currencyCode": "A String", # The 3-letter currency code defined in ISO 4217.
},
"labels": { # The labels describing the metric value.
# See comments on google.api.servicecontrol.v1.Operation.labels for
# the overriding relationship.
"a_key": "A String",
},
"doubleValue": 3.14, # A double precision floating point value.
"boolValue": True or False, # A boolean value.
"startTime": "A String", # The start of the time period over which this metric value's measurement
# applies. The time period has different semantics for different metric
# types (cumulative, delta, and gauge). See the metric definition
# documentation in the service configuration for details.
"distributionValue": { # Distribution represents a frequency distribution of double-valued sample # A distribution value.
# points. It contains the size of the population of sample points plus
# additional optional information:
#
# - the arithmetic mean of the samples
# - the minimum and maximum of the samples
# - the sum-squared-deviation of the samples, used to compute variance
# - a histogram of the values of the sample points
"count": "A String", # The total number of samples in the distribution. Must be >= 0.
"sumOfSquaredDeviation": 3.14, # The sum of squared deviations from the mean:
# Sum[i=1..count]((x_i - mean)^2)
# where each x_i is a sample values. If `count` is zero then this field
# must be zero, otherwise validation of the request fails.
"bucketCounts": [ # The number of samples in each histogram bucket. `bucket_counts` are
# optional. If present, they must sum to the `count` value.
#
# The buckets are defined below in `bucket_option`. There are N buckets.
# `bucket_counts[0]` is the number of samples in the underflow bucket.
# `bucket_counts[1]` to `bucket_counts[N-1]` are the numbers of samples
# in each of the finite buckets. And `bucket_counts[N] is the number
# of samples in the overflow bucket. See the comments of `bucket_option`
# below for more details.
#
# Any suffix of trailing zeros may be omitted.
"A String",
],
"exponentialBuckets": { # Describing buckets with exponentially growing width. # Buckets with exponentially growing width.
"scale": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be > 0.
"growthFactor": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be larger than 1.0.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
},
"maximum": 3.14, # The maximum of the population of values. Ignored if `count` is zero.
"minimum": 3.14, # The minimum of the population of values. Ignored if `count` is zero.
"linearBuckets": { # Describing buckets with constant width. # Buckets with constant width.
"width": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
# Must be strictly positive.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
"offset": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
},
"explicitBuckets": { # Describing buckets with arbitrary user-provided width. # Buckets with arbitrary user-provided width.
"bounds": [ # 'bound' is a list of strictly increasing boundaries between
# buckets. Note that a list of length N-1 defines N buckets because
# of fenceposting. See comments on `bucket_options` for details.
#
# The i'th finite bucket covers the interval
# [bound[i-1], bound[i])
# where i ranges from 1 to bound_size() - 1. Note that there are no
# finite buckets at all if 'bound' only contains a single element; in
# that special case the single bound defines the boundary between the
# underflow and overflow buckets.
#
# bucket number lower bound upper bound
# i == 0 (underflow) -inf bound[i]
# 0 < i < bound_size() bound[i-1] bound[i]
# i == bound_size() (overflow) bound[i-1] +inf
3.14,
],
},
"mean": 3.14, # The arithmetic mean of the samples in the distribution. If `count` is
# zero then this field must be zero.
},
"stringValue": "A String", # A text string value.
"int64Value": "A String", # A signed 64-bit integer value.
"endTime": "A String", # The end of the time period over which this metric value's measurement
# applies.
},
],
"metricName": "A String", # The metric name defined in the service configuration.
},
],
"methodName": "A String", # Fully qualified name of the API method for which this quota operation is
# requested. This name is used for matching quota rules or metric rules and
# billing status rules defined in service configuration. This field is not
# required if the quota operation is performed on non-API resources.
#
# Example of an RPC method name:
# google.example.library.v1.LibraryService.CreateShelf
"labels": { # Labels describing the operation.
"a_key": "A String",
},
"quotaMode": "A String", # Quota mode for this operation.
"consumerId": "A String", # Identity of the consumer for whom this quota operation is being performed.
#
# This can be in one of the following formats:
# project:<project_id>,
# project_number:<project_number>,
# api_key:<api_key>.
"operationId": "A String", # Identity of the operation. This must be unique within the scope of the
# service that generated the operation. If the service calls AllocateQuota
# and ReleaseQuota on the same operation, the two calls should carry the
# same ID.
#
# UUID version 4 is recommended, though not required. In scenarios where an
# operation is computed from existing information and an idempotent id is
# desirable for deduplication purpose, UUID version 5 is recommended. See
# RFC 4122 for details.
},
}
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Response message for the AllocateQuota method.
"serviceConfigId": "A String", # ID of the actual config used to process the request.
"quotaMetrics": [ # Quota metrics to indicate the result of allocation. Depending on the
# request, one or more of the following metrics will be included:
#
# 1. For rate quota, per quota group or per quota metric incremental usage
# will be specified using the following delta metric:
# "serviceruntime.googleapis.com/api/consumer/quota_used_count"
#
# 2. For allocation quota, per quota metric total usage will be specified
# using the following gauge metric:
# "serviceruntime.googleapis.com/allocation/consumer/quota_used_count"
#
# 3. For both rate quota and allocation quota, the quota limit reached
# condition will be specified using the following boolean metric:
# "serviceruntime.googleapis.com/quota/exceeded"
#
# 4. For allocation quota, value for each quota limit associated with
# the metrics will be specified using the following gauge metric:
# "serviceruntime.googleapis.com/quota/limit"
{ # Represents a set of metric values in the same metric.
# Each metric value in the set should have a unique combination of start time,
# end time, and label values.
"metricValues": [ # The values in this metric.
{ # Represents a single metric value.
"moneyValue": { # Represents an amount of money with its currency type. # A money value.
"nanos": 42, # Number of nano (10^-9) units of the amount.
# The value must be between -999,999,999 and +999,999,999 inclusive.
# If `units` is positive, `nanos` must be positive or zero.
# If `units` is zero, `nanos` can be positive, zero, or negative.
# If `units` is negative, `nanos` must be negative or zero.
# For example $-1.75 is represented as `units`=-1 and `nanos`=-750,000,000.
"units": "A String", # The whole units of the amount.
# For example if `currencyCode` is `"USD"`, then 1 unit is one US dollar.
"currencyCode": "A String", # The 3-letter currency code defined in ISO 4217.
},
"labels": { # The labels describing the metric value.
# See comments on google.api.servicecontrol.v1.Operation.labels for
# the overriding relationship.
"a_key": "A String",
},
"doubleValue": 3.14, # A double precision floating point value.
"boolValue": True or False, # A boolean value.
"startTime": "A String", # The start of the time period over which this metric value's measurement
# applies. The time period has different semantics for different metric
# types (cumulative, delta, and gauge). See the metric definition
# documentation in the service configuration for details.
"distributionValue": { # Distribution represents a frequency distribution of double-valued sample # A distribution value.
# points. It contains the size of the population of sample points plus
# additional optional information:
#
# - the arithmetic mean of the samples
# - the minimum and maximum of the samples
# - the sum-squared-deviation of the samples, used to compute variance
# - a histogram of the values of the sample points
"count": "A String", # The total number of samples in the distribution. Must be >= 0.
"sumOfSquaredDeviation": 3.14, # The sum of squared deviations from the mean:
# Sum[i=1..count]((x_i - mean)^2)
# where each x_i is a sample values. If `count` is zero then this field
# must be zero, otherwise validation of the request fails.
"bucketCounts": [ # The number of samples in each histogram bucket. `bucket_counts` are
# optional. If present, they must sum to the `count` value.
#
# The buckets are defined below in `bucket_option`. There are N buckets.
# `bucket_counts[0]` is the number of samples in the underflow bucket.
# `bucket_counts[1]` to `bucket_counts[N-1]` are the numbers of samples
# in each of the finite buckets. And `bucket_counts[N] is the number
# of samples in the overflow bucket. See the comments of `bucket_option`
# below for more details.
#
# Any suffix of trailing zeros may be omitted.
"A String",
],
"exponentialBuckets": { # Describing buckets with exponentially growing width. # Buckets with exponentially growing width.
"scale": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be > 0.
"growthFactor": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be larger than 1.0.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
},
"maximum": 3.14, # The maximum of the population of values. Ignored if `count` is zero.
"minimum": 3.14, # The minimum of the population of values. Ignored if `count` is zero.
"linearBuckets": { # Describing buckets with constant width. # Buckets with constant width.
"width": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
# Must be strictly positive.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
"offset": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
},
"explicitBuckets": { # Describing buckets with arbitrary user-provided width. # Buckets with arbitrary user-provided width.
"bounds": [ # 'bound' is a list of strictly increasing boundaries between
# buckets. Note that a list of length N-1 defines N buckets because
# of fenceposting. See comments on `bucket_options` for details.
#
# The i'th finite bucket covers the interval
# [bound[i-1], bound[i])
# where i ranges from 1 to bound_size() - 1. Note that there are no
# finite buckets at all if 'bound' only contains a single element; in
# that special case the single bound defines the boundary between the
# underflow and overflow buckets.
#
# bucket number lower bound upper bound
# i == 0 (underflow) -inf bound[i]
# 0 < i < bound_size() bound[i-1] bound[i]
# i == bound_size() (overflow) bound[i-1] +inf
3.14,
],
},
"mean": 3.14, # The arithmetic mean of the samples in the distribution. If `count` is
# zero then this field must be zero.
},
"stringValue": "A String", # A text string value.
"int64Value": "A String", # A signed 64-bit integer value.
"endTime": "A String", # The end of the time period over which this metric value's measurement
# applies.
},
],
"metricName": "A String", # The metric name defined in the service configuration.
},
],
"allocateErrors": [ # Indicates the decision of the allocate.
{
"code": "A String", # Error code.
"description": "A String", # Free-form text that provides details on the cause of the error.
"subject": "A String", # Subject to whom this error applies. See the specific enum for more details
# on this field. For example, "clientip:<ip address of client>" or
# "project:<Google developer project id>".
},
],
"operationId": "A String", # The same operation_id value used in the AllocateQuotaRequest. Used for
# logging and diagnostics purposes.
}</pre>
</div>
<div class="method">
<code class="details" id="check">check(serviceName, body, x__xgafv=None)</code>
<pre>Checks an operation with Google Service Control to decide whether
the given operation should proceed. It should be called before the
operation is executed.
If feasible, the client should cache the check results and reuse them for
60 seconds. In case of server errors, the client can rely on the cached
results for longer time.
NOTE: the `CheckRequest` has the size limit of 64KB.
This method requires the `servicemanagement.services.check` permission
on the specified service. For more information, see
[Google Cloud IAM](https://cloud.google.com/iam).
Args:
serviceName: string, The service name as specified in its service configuration. For example,
`"pubsub.googleapis.com"`.
See google.api.Service for the definition of a service name. (required)
body: object, The request body. (required)
The object takes the form of:
{ # Request message for the Check method.
"skipActivationCheck": True or False, # Indicates if service activation check should be skipped for this request.
# Default behavior is to perform the check and apply relevant quota.
"serviceConfigId": "A String", # Specifies which version of service configuration should be used to process
# the request.
#
# If unspecified or no matching version can be found, the
# latest one will be used.
"operation": { # Represents information regarding an operation. # The operation to be checked.
"labels": { # Labels describing the operation. Only the following labels are allowed:
#
# - Labels describing monitored resources as defined in
# the service configuration.
# - Default labels of metric values. When specified, labels defined in the
# metric value override these default.
# - The following labels defined by Google Cloud Platform:
# - `cloud.googleapis.com/location` describing the location where the
# operation happened,
# - `servicecontrol.googleapis.com/user_agent` describing the user agent
# of the API request,
# - `servicecontrol.googleapis.com/service_agent` describing the service
# used to handle the API request (e.g. ESP),
# - `servicecontrol.googleapis.com/platform` describing the platform
# where the API is served (e.g. GAE, GCE, GKE).
"a_key": "A String",
},
"metricValueSets": [ # Represents information about this operation. Each MetricValueSet
# corresponds to a metric defined in the service configuration.
# The data type used in the MetricValueSet must agree with
# the data type specified in the metric definition.
#
# Within a single operation, it is not allowed to have more than one
# MetricValue instances that have the same metric names and identical
# label value combinations. If a request has such duplicated MetricValue
# instances, the entire request is rejected with
# an invalid argument error.
{ # Represents a set of metric values in the same metric.
# Each metric value in the set should have a unique combination of start time,
# end time, and label values.
"metricValues": [ # The values in this metric.
{ # Represents a single metric value.
"moneyValue": { # Represents an amount of money with its currency type. # A money value.
"nanos": 42, # Number of nano (10^-9) units of the amount.
# The value must be between -999,999,999 and +999,999,999 inclusive.
# If `units` is positive, `nanos` must be positive or zero.
# If `units` is zero, `nanos` can be positive, zero, or negative.
# If `units` is negative, `nanos` must be negative or zero.
# For example $-1.75 is represented as `units`=-1 and `nanos`=-750,000,000.
"units": "A String", # The whole units of the amount.
# For example if `currencyCode` is `"USD"`, then 1 unit is one US dollar.
"currencyCode": "A String", # The 3-letter currency code defined in ISO 4217.
},
"labels": { # The labels describing the metric value.
# See comments on google.api.servicecontrol.v1.Operation.labels for
# the overriding relationship.
"a_key": "A String",
},
"doubleValue": 3.14, # A double precision floating point value.
"boolValue": True or False, # A boolean value.
"startTime": "A String", # The start of the time period over which this metric value's measurement
# applies. The time period has different semantics for different metric
# types (cumulative, delta, and gauge). See the metric definition
# documentation in the service configuration for details.
"distributionValue": { # Distribution represents a frequency distribution of double-valued sample # A distribution value.
# points. It contains the size of the population of sample points plus
# additional optional information:
#
# - the arithmetic mean of the samples
# - the minimum and maximum of the samples
# - the sum-squared-deviation of the samples, used to compute variance
# - a histogram of the values of the sample points
"count": "A String", # The total number of samples in the distribution. Must be >= 0.
"sumOfSquaredDeviation": 3.14, # The sum of squared deviations from the mean:
# Sum[i=1..count]((x_i - mean)^2)
# where each x_i is a sample values. If `count` is zero then this field
# must be zero, otherwise validation of the request fails.
"bucketCounts": [ # The number of samples in each histogram bucket. `bucket_counts` are
# optional. If present, they must sum to the `count` value.
#
# The buckets are defined below in `bucket_option`. There are N buckets.
# `bucket_counts[0]` is the number of samples in the underflow bucket.
# `bucket_counts[1]` to `bucket_counts[N-1]` are the numbers of samples
# in each of the finite buckets. And `bucket_counts[N] is the number
# of samples in the overflow bucket. See the comments of `bucket_option`
# below for more details.
#
# Any suffix of trailing zeros may be omitted.
"A String",
],
"exponentialBuckets": { # Describing buckets with exponentially growing width. # Buckets with exponentially growing width.
"scale": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be > 0.
"growthFactor": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be larger than 1.0.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
},
"maximum": 3.14, # The maximum of the population of values. Ignored if `count` is zero.
"minimum": 3.14, # The minimum of the population of values. Ignored if `count` is zero.
"linearBuckets": { # Describing buckets with constant width. # Buckets with constant width.
"width": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
# Must be strictly positive.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
"offset": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
},
"explicitBuckets": { # Describing buckets with arbitrary user-provided width. # Buckets with arbitrary user-provided width.
"bounds": [ # 'bound' is a list of strictly increasing boundaries between
# buckets. Note that a list of length N-1 defines N buckets because
# of fenceposting. See comments on `bucket_options` for details.
#
# The i'th finite bucket covers the interval
# [bound[i-1], bound[i])
# where i ranges from 1 to bound_size() - 1. Note that there are no
# finite buckets at all if 'bound' only contains a single element; in
# that special case the single bound defines the boundary between the
# underflow and overflow buckets.
#
# bucket number lower bound upper bound
# i == 0 (underflow) -inf bound[i]
# 0 < i < bound_size() bound[i-1] bound[i]
# i == bound_size() (overflow) bound[i-1] +inf
3.14,
],
},
"mean": 3.14, # The arithmetic mean of the samples in the distribution. If `count` is
# zero then this field must be zero.
},
"stringValue": "A String", # A text string value.
"int64Value": "A String", # A signed 64-bit integer value.
"endTime": "A String", # The end of the time period over which this metric value's measurement
# applies.
},
],
"metricName": "A String", # The metric name defined in the service configuration.
},
],
"importance": "A String", # DO NOT USE. This is an experimental field.
"operationName": "A String", # Fully qualified name of the operation. Reserved for future use.
"resourceContainer": "A String", # The resource name of the parent of a resource in the resource hierarchy.
#
# This can be in one of the following formats:
# - “projects/<project-id or project-number>”
# - “folders/<folder-id>”
# - “organizations/<organization-id>”
"quotaProperties": { # Represents the properties needed for quota operations. # Represents the properties needed for quota check. Applicable only if this
# operation is for a quota check request.
"quotaMode": "A String", # Quota mode for this operation.
"limitByIds": { # LimitType IDs that should be used for checking quota. Key in this map
# should be a valid LimitType string, and the value is the ID to be used. For
# example, an entry <USER, 123> will cause all user quota limits to use 123
# as the user ID. See google/api/quota.proto for the definition of LimitType.
# CLIENT_PROJECT: Not supported.
# USER: Value of this entry will be used for enforcing user-level quota
# limits. If none specified, caller IP passed in the
# servicecontrol.googleapis.com/caller_ip label will be used instead.
# If the server cannot resolve a value for this LimitType, an error
# will be thrown. No validation will be performed on this ID.
# Deprecated: use servicecontrol.googleapis.com/user label to send user ID.
"a_key": "A String",
},
},
"consumerId": "A String", # Identity of the consumer who is using the service.
# This field should be filled in for the operations initiated by a
# consumer, but not for service-initiated operations that are
# not related to a specific consumer.
#
# This can be in one of the following formats:
# project:<project_id>,
# project_number:<project_number>,
# api_key:<api_key>.
"userLabels": { # User defined labels for the resource that this operation is associated
# with.
"a_key": "A String",
},
"logEntries": [ # Represents information to be logged.
{ # An individual log entry.
"severity": "A String", # The severity of the log entry. The default value is
# `LogSeverity.DEFAULT`.
"textPayload": "A String", # The log entry payload, represented as a Unicode string (UTF-8).
"timestamp": "A String", # The time the event described by the log entry occurred. If
# omitted, defaults to operation start time.
"labels": { # A set of user-defined (key, value) data that provides additional
# information about the log entry.
"a_key": "A String",
},
"structPayload": { # The log entry payload, represented as a structure that
# is expressed as a JSON object.
"a_key": "", # Properties of the object.
},
"insertId": "A String", # A unique ID for the log entry used for deduplication. If omitted,
# the implementation will generate one based on operation_id.
"protoPayload": { # The log entry payload, represented as a protocol buffer that is
# expressed as a JSON object. You can only pass `protoPayload`
# values that belong to a set of approved types.
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
"name": "A String", # Required. The log to which this log entry belongs. Examples: `"syslog"`,
# `"book_log"`.
},
],
"startTime": "A String", # Required. Start time of the operation.
"endTime": "A String", # End time of the operation.
# Required when the operation is used in ServiceController.Report,
# but optional when the operation is used in ServiceController.Check.
"operationId": "A String", # Identity of the operation. This must be unique within the scope of the
# service that generated the operation. If the service calls
# Check() and Report() on the same operation, the two calls should carry
# the same id.
#
# UUID version 4 is recommended, though not required.
# In scenarios where an operation is computed from existing information
# and an idempotent id is desirable for deduplication purpose, UUID version 5
# is recommended. See RFC 4122 for details.
},
"requestProjectSettings": True or False, # Requests the project settings to be returned as part of the check response.
}
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Response message for the Check method.
"serviceConfigId": "A String", # The actual config id used to process the request.
"quotaInfo": { # Contains the quota information for a quota check response. # Quota information for the check request associated with this response.
"quotaMetrics": [ # Quota metrics to indicate the usage. Depending on the check request, one or
# more of the following metrics will be included:
#
# 1. For rate quota, per quota group or per quota metric incremental usage
# will be specified using the following delta metric:
# "serviceruntime.googleapis.com/api/consumer/quota_used_count"
#
# 2. For allocation quota, per quota metric total usage will be specified
# using the following gauge metric:
# "serviceruntime.googleapis.com/allocation/consumer/quota_used_count"
#
# 3. For both rate quota and allocation quota, the quota limit reached
# condition will be specified using the following boolean metric:
# "serviceruntime.googleapis.com/quota/exceeded"
{ # Represents a set of metric values in the same metric.
# Each metric value in the set should have a unique combination of start time,
# end time, and label values.
"metricValues": [ # The values in this metric.
{ # Represents a single metric value.
"moneyValue": { # Represents an amount of money with its currency type. # A money value.
"nanos": 42, # Number of nano (10^-9) units of the amount.
# The value must be between -999,999,999 and +999,999,999 inclusive.
# If `units` is positive, `nanos` must be positive or zero.
# If `units` is zero, `nanos` can be positive, zero, or negative.
# If `units` is negative, `nanos` must be negative or zero.
# For example $-1.75 is represented as `units`=-1 and `nanos`=-750,000,000.
"units": "A String", # The whole units of the amount.
# For example if `currencyCode` is `"USD"`, then 1 unit is one US dollar.
"currencyCode": "A String", # The 3-letter currency code defined in ISO 4217.
},
"labels": { # The labels describing the metric value.
# See comments on google.api.servicecontrol.v1.Operation.labels for
# the overriding relationship.
"a_key": "A String",
},
"doubleValue": 3.14, # A double precision floating point value.
"boolValue": True or False, # A boolean value.
"startTime": "A String", # The start of the time period over which this metric value's measurement
# applies. The time period has different semantics for different metric
# types (cumulative, delta, and gauge). See the metric definition
# documentation in the service configuration for details.
"distributionValue": { # Distribution represents a frequency distribution of double-valued sample # A distribution value.
# points. It contains the size of the population of sample points plus
# additional optional information:
#
# - the arithmetic mean of the samples
# - the minimum and maximum of the samples
# - the sum-squared-deviation of the samples, used to compute variance
# - a histogram of the values of the sample points
"count": "A String", # The total number of samples in the distribution. Must be >= 0.
"sumOfSquaredDeviation": 3.14, # The sum of squared deviations from the mean:
# Sum[i=1..count]((x_i - mean)^2)
# where each x_i is a sample values. If `count` is zero then this field
# must be zero, otherwise validation of the request fails.
"bucketCounts": [ # The number of samples in each histogram bucket. `bucket_counts` are
# optional. If present, they must sum to the `count` value.
#
# The buckets are defined below in `bucket_option`. There are N buckets.
# `bucket_counts[0]` is the number of samples in the underflow bucket.
# `bucket_counts[1]` to `bucket_counts[N-1]` are the numbers of samples
# in each of the finite buckets. And `bucket_counts[N] is the number
# of samples in the overflow bucket. See the comments of `bucket_option`
# below for more details.
#
# Any suffix of trailing zeros may be omitted.
"A String",
],
"exponentialBuckets": { # Describing buckets with exponentially growing width. # Buckets with exponentially growing width.
"scale": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be > 0.
"growthFactor": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be larger than 1.0.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
},
"maximum": 3.14, # The maximum of the population of values. Ignored if `count` is zero.
"minimum": 3.14, # The minimum of the population of values. Ignored if `count` is zero.
"linearBuckets": { # Describing buckets with constant width. # Buckets with constant width.
"width": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
# Must be strictly positive.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
"offset": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
},
"explicitBuckets": { # Describing buckets with arbitrary user-provided width. # Buckets with arbitrary user-provided width.
"bounds": [ # 'bound' is a list of strictly increasing boundaries between
# buckets. Note that a list of length N-1 defines N buckets because
# of fenceposting. See comments on `bucket_options` for details.
#
# The i'th finite bucket covers the interval
# [bound[i-1], bound[i])
# where i ranges from 1 to bound_size() - 1. Note that there are no
# finite buckets at all if 'bound' only contains a single element; in
# that special case the single bound defines the boundary between the
# underflow and overflow buckets.
#
# bucket number lower bound upper bound
# i == 0 (underflow) -inf bound[i]
# 0 < i < bound_size() bound[i-1] bound[i]
# i == bound_size() (overflow) bound[i-1] +inf
3.14,
],
},
"mean": 3.14, # The arithmetic mean of the samples in the distribution. If `count` is
# zero then this field must be zero.
},
"stringValue": "A String", # A text string value.
"int64Value": "A String", # A signed 64-bit integer value.
"endTime": "A String", # The end of the time period over which this metric value's measurement
# applies.
},
],
"metricName": "A String", # The metric name defined in the service configuration.
},
],
"limitExceeded": [ # Quota Metrics that have exceeded quota limits.
# For QuotaGroup-based quota, this is QuotaGroup.name
# For QuotaLimit-based quota, this is QuotaLimit.name
# See: google.api.Quota
# Deprecated: Use quota_metrics to get per quota group limit exceeded status.
"A String",
],
"quotaConsumed": { # Map of quota group name to the actual number of tokens consumed. If the
# quota check was not successful, then this will not be populated due to no
# quota consumption.
# Deprecated: Use quota_metrics to get per quota group usage.
"a_key": 42,
},
},
"checkInfo": { # Feedback data returned from the server during processing a Check request.
"unusedArguments": [ # A list of fields and label keys that are ignored by the server.
# The client doesn't need to send them for following requests to improve
# performance and allow better aggregation.
"A String",
],
},
"checkErrors": [ # Indicate the decision of the check.
#
# If no check errors are present, the service should process the operation.
# Otherwise the service should use the list of errors to determine the
# appropriate action.
{ # Defines the errors to be returned in
# google.api.servicecontrol.v1.CheckResponse.check_errors.
"code": "A String", # The error code.
"detail": "A String", # Free-form text providing details on the error cause of the error.
},
],
"operationId": "A String", # The same operation_id value used in the CheckRequest.
# Used for logging and diagnostics purposes.
}</pre>
</div>
<div class="method">
<code class="details" id="endReconciliation">endReconciliation(serviceName, body, x__xgafv=None)</code>
<pre>Signals the quota controller that service ends the ongoing usage
reconciliation.
This method requires the `servicemanagement.services.quota`
permission on the specified service. For more information, see
[Google Cloud IAM](https://cloud.google.com/iam).
Args:
serviceName: string, Name of the service as specified in the service configuration. For example,
`"pubsub.googleapis.com"`.
See google.api.Service for the definition of a service name. (required)
body: object, The request body. (required)
The object takes the form of:
{
"serviceConfigId": "A String", # Specifies which version of service configuration should be used to process
# the request. If unspecified or no matching version can be found, the latest
# one will be used.
"reconciliationOperation": { # Represents information regarding a quota operation. # Operation that describes the quota reconciliation.
"quotaMetrics": [ # Represents information about this operation. Each MetricValueSet
# corresponds to a metric defined in the service configuration.
# The data type used in the MetricValueSet must agree with
# the data type specified in the metric definition.
#
# Within a single operation, it is not allowed to have more than one
# MetricValue instances that have the same metric names and identical
# label value combinations. If a request has such duplicated MetricValue
# instances, the entire request is rejected with
# an invalid argument error.
{ # Represents a set of metric values in the same metric.
# Each metric value in the set should have a unique combination of start time,
# end time, and label values.
"metricValues": [ # The values in this metric.
{ # Represents a single metric value.
"moneyValue": { # Represents an amount of money with its currency type. # A money value.
"nanos": 42, # Number of nano (10^-9) units of the amount.
# The value must be between -999,999,999 and +999,999,999 inclusive.
# If `units` is positive, `nanos` must be positive or zero.
# If `units` is zero, `nanos` can be positive, zero, or negative.
# If `units` is negative, `nanos` must be negative or zero.
# For example $-1.75 is represented as `units`=-1 and `nanos`=-750,000,000.
"units": "A String", # The whole units of the amount.
# For example if `currencyCode` is `"USD"`, then 1 unit is one US dollar.
"currencyCode": "A String", # The 3-letter currency code defined in ISO 4217.
},
"labels": { # The labels describing the metric value.
# See comments on google.api.servicecontrol.v1.Operation.labels for
# the overriding relationship.
"a_key": "A String",
},
"doubleValue": 3.14, # A double precision floating point value.
"boolValue": True or False, # A boolean value.
"startTime": "A String", # The start of the time period over which this metric value's measurement
# applies. The time period has different semantics for different metric
# types (cumulative, delta, and gauge). See the metric definition
# documentation in the service configuration for details.
"distributionValue": { # Distribution represents a frequency distribution of double-valued sample # A distribution value.
# points. It contains the size of the population of sample points plus
# additional optional information:
#
# - the arithmetic mean of the samples
# - the minimum and maximum of the samples
# - the sum-squared-deviation of the samples, used to compute variance
# - a histogram of the values of the sample points
"count": "A String", # The total number of samples in the distribution. Must be >= 0.
"sumOfSquaredDeviation": 3.14, # The sum of squared deviations from the mean:
# Sum[i=1..count]((x_i - mean)^2)
# where each x_i is a sample values. If `count` is zero then this field
# must be zero, otherwise validation of the request fails.
"bucketCounts": [ # The number of samples in each histogram bucket. `bucket_counts` are
# optional. If present, they must sum to the `count` value.
#
# The buckets are defined below in `bucket_option`. There are N buckets.
# `bucket_counts[0]` is the number of samples in the underflow bucket.
# `bucket_counts[1]` to `bucket_counts[N-1]` are the numbers of samples
# in each of the finite buckets. And `bucket_counts[N] is the number
# of samples in the overflow bucket. See the comments of `bucket_option`
# below for more details.
#
# Any suffix of trailing zeros may be omitted.
"A String",
],
"exponentialBuckets": { # Describing buckets with exponentially growing width. # Buckets with exponentially growing width.
"scale": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be > 0.
"growthFactor": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be larger than 1.0.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
},
"maximum": 3.14, # The maximum of the population of values. Ignored if `count` is zero.
"minimum": 3.14, # The minimum of the population of values. Ignored if `count` is zero.
"linearBuckets": { # Describing buckets with constant width. # Buckets with constant width.
"width": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
# Must be strictly positive.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
"offset": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
},
"explicitBuckets": { # Describing buckets with arbitrary user-provided width. # Buckets with arbitrary user-provided width.
"bounds": [ # 'bound' is a list of strictly increasing boundaries between
# buckets. Note that a list of length N-1 defines N buckets because
# of fenceposting. See comments on `bucket_options` for details.
#
# The i'th finite bucket covers the interval
# [bound[i-1], bound[i])
# where i ranges from 1 to bound_size() - 1. Note that there are no
# finite buckets at all if 'bound' only contains a single element; in
# that special case the single bound defines the boundary between the
# underflow and overflow buckets.
#
# bucket number lower bound upper bound
# i == 0 (underflow) -inf bound[i]
# 0 < i < bound_size() bound[i-1] bound[i]
# i == bound_size() (overflow) bound[i-1] +inf
3.14,
],
},
"mean": 3.14, # The arithmetic mean of the samples in the distribution. If `count` is
# zero then this field must be zero.
},
"stringValue": "A String", # A text string value.
"int64Value": "A String", # A signed 64-bit integer value.
"endTime": "A String", # The end of the time period over which this metric value's measurement
# applies.
},
],
"metricName": "A String", # The metric name defined in the service configuration.
},
],
"methodName": "A String", # Fully qualified name of the API method for which this quota operation is
# requested. This name is used for matching quota rules or metric rules and
# billing status rules defined in service configuration. This field is not
# required if the quota operation is performed on non-API resources.
#
# Example of an RPC method name:
# google.example.library.v1.LibraryService.CreateShelf
"labels": { # Labels describing the operation.
"a_key": "A String",
},
"quotaMode": "A String", # Quota mode for this operation.
"consumerId": "A String", # Identity of the consumer for whom this quota operation is being performed.
#
# This can be in one of the following formats:
# project:<project_id>,
# project_number:<project_number>,
# api_key:<api_key>.
"operationId": "A String", # Identity of the operation. This must be unique within the scope of the
# service that generated the operation. If the service calls AllocateQuota
# and ReleaseQuota on the same operation, the two calls should carry the
# same ID.
#
# UUID version 4 is recommended, though not required. In scenarios where an
# operation is computed from existing information and an idempotent id is
# desirable for deduplication purpose, UUID version 5 is recommended. See
# RFC 4122 for details.
},
}
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{
"serviceConfigId": "A String", # ID of the actual config used to process the request.
"quotaMetrics": [ # Metric values as tracked by One Platform before the adjustment was made.
# The following metrics will be included:
#
# 1. Per quota metric total usage will be specified using the following gauge
# metric:
# "serviceruntime.googleapis.com/allocation/consumer/quota_used_count"
#
# 2. Value for each quota limit associated with the metrics will be specified
# using the following gauge metric:
# "serviceruntime.googleapis.com/quota/limit"
#
# 3. Delta value of the usage after the reconciliation for limits associated
# with the metrics will be specified using the following metric:
# "serviceruntime.googleapis.com/allocation/reconciliation_delta"
# The delta value is defined as:
# new_usage_from_client - existing_value_in_spanner.
# This metric is not defined in serviceruntime.yaml or in Cloud Monarch.
# This metric is meant for callers' use only. Since this metric is not
# defined in the monitoring backend, reporting on this metric will result in
# an error.
{ # Represents a set of metric values in the same metric.
# Each metric value in the set should have a unique combination of start time,
# end time, and label values.
"metricValues": [ # The values in this metric.
{ # Represents a single metric value.
"moneyValue": { # Represents an amount of money with its currency type. # A money value.
"nanos": 42, # Number of nano (10^-9) units of the amount.
# The value must be between -999,999,999 and +999,999,999 inclusive.
# If `units` is positive, `nanos` must be positive or zero.
# If `units` is zero, `nanos` can be positive, zero, or negative.
# If `units` is negative, `nanos` must be negative or zero.
# For example $-1.75 is represented as `units`=-1 and `nanos`=-750,000,000.
"units": "A String", # The whole units of the amount.
# For example if `currencyCode` is `"USD"`, then 1 unit is one US dollar.
"currencyCode": "A String", # The 3-letter currency code defined in ISO 4217.
},
"labels": { # The labels describing the metric value.
# See comments on google.api.servicecontrol.v1.Operation.labels for
# the overriding relationship.
"a_key": "A String",
},
"doubleValue": 3.14, # A double precision floating point value.
"boolValue": True or False, # A boolean value.
"startTime": "A String", # The start of the time period over which this metric value's measurement
# applies. The time period has different semantics for different metric
# types (cumulative, delta, and gauge). See the metric definition
# documentation in the service configuration for details.
"distributionValue": { # Distribution represents a frequency distribution of double-valued sample # A distribution value.
# points. It contains the size of the population of sample points plus
# additional optional information:
#
# - the arithmetic mean of the samples
# - the minimum and maximum of the samples
# - the sum-squared-deviation of the samples, used to compute variance
# - a histogram of the values of the sample points
"count": "A String", # The total number of samples in the distribution. Must be >= 0.
"sumOfSquaredDeviation": 3.14, # The sum of squared deviations from the mean:
# Sum[i=1..count]((x_i - mean)^2)
# where each x_i is a sample values. If `count` is zero then this field
# must be zero, otherwise validation of the request fails.
"bucketCounts": [ # The number of samples in each histogram bucket. `bucket_counts` are
# optional. If present, they must sum to the `count` value.
#
# The buckets are defined below in `bucket_option`. There are N buckets.
# `bucket_counts[0]` is the number of samples in the underflow bucket.
# `bucket_counts[1]` to `bucket_counts[N-1]` are the numbers of samples
# in each of the finite buckets. And `bucket_counts[N] is the number
# of samples in the overflow bucket. See the comments of `bucket_option`
# below for more details.
#
# Any suffix of trailing zeros may be omitted.
"A String",
],
"exponentialBuckets": { # Describing buckets with exponentially growing width. # Buckets with exponentially growing width.
"scale": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be > 0.
"growthFactor": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be larger than 1.0.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
},
"maximum": 3.14, # The maximum of the population of values. Ignored if `count` is zero.
"minimum": 3.14, # The minimum of the population of values. Ignored if `count` is zero.
"linearBuckets": { # Describing buckets with constant width. # Buckets with constant width.
"width": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
# Must be strictly positive.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
"offset": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
},
"explicitBuckets": { # Describing buckets with arbitrary user-provided width. # Buckets with arbitrary user-provided width.
"bounds": [ # 'bound' is a list of strictly increasing boundaries between
# buckets. Note that a list of length N-1 defines N buckets because
# of fenceposting. See comments on `bucket_options` for details.
#
# The i'th finite bucket covers the interval
# [bound[i-1], bound[i])
# where i ranges from 1 to bound_size() - 1. Note that there are no
# finite buckets at all if 'bound' only contains a single element; in
# that special case the single bound defines the boundary between the
# underflow and overflow buckets.
#
# bucket number lower bound upper bound
# i == 0 (underflow) -inf bound[i]
# 0 < i < bound_size() bound[i-1] bound[i]
# i == bound_size() (overflow) bound[i-1] +inf
3.14,
],
},
"mean": 3.14, # The arithmetic mean of the samples in the distribution. If `count` is
# zero then this field must be zero.
},
"stringValue": "A String", # A text string value.
"int64Value": "A String", # A signed 64-bit integer value.
"endTime": "A String", # The end of the time period over which this metric value's measurement
# applies.
},
],
"metricName": "A String", # The metric name defined in the service configuration.
},
],
"reconciliationErrors": [ # Indicates the decision of the reconciliation end.
{
"code": "A String", # Error code.
"description": "A String", # Free-form text that provides details on the cause of the error.
"subject": "A String", # Subject to whom this error applies. See the specific enum for more details
# on this field. For example, "clientip:<ip address of client>" or
# "project:<Google developer project id>".
},
],
"operationId": "A String", # The same operation_id value used in the EndReconciliationRequest. Used for
# logging and diagnostics purposes.
}</pre>
</div>
<div class="method">
<code class="details" id="releaseQuota">releaseQuota(serviceName, body, x__xgafv=None)</code>
<pre>Releases previously allocated quota done through AllocateQuota method.
This method requires the `servicemanagement.services.quota`
permission on the specified service. For more information, see
[Google Cloud IAM](https://cloud.google.com/iam).
**NOTE:** the client code **must** fail-open if the server returns one
of the following quota errors:
- `PROJECT_STATUS_UNAVAILABLE`
- `SERVICE_STATUS_UNAVAILABLE`
- `BILLING_STATUS_UNAVAILABLE`
- `QUOTA_SYSTEM_UNAVAILABLE`
The server may inject above errors to prohibit any hard dependency
on the quota system.
Args:
serviceName: string, Name of the service as specified in the service configuration. For example,
`"pubsub.googleapis.com"`.
See google.api.Service for the definition of a service name. (required)
body: object, The request body. (required)
The object takes the form of:
{ # Request message for the ReleaseQuota method.
"releaseOperation": { # Represents information regarding a quota operation. # Operation that describes the quota release.
"quotaMetrics": [ # Represents information about this operation. Each MetricValueSet
# corresponds to a metric defined in the service configuration.
# The data type used in the MetricValueSet must agree with
# the data type specified in the metric definition.
#
# Within a single operation, it is not allowed to have more than one
# MetricValue instances that have the same metric names and identical
# label value combinations. If a request has such duplicated MetricValue
# instances, the entire request is rejected with
# an invalid argument error.
{ # Represents a set of metric values in the same metric.
# Each metric value in the set should have a unique combination of start time,
# end time, and label values.
"metricValues": [ # The values in this metric.
{ # Represents a single metric value.
"moneyValue": { # Represents an amount of money with its currency type. # A money value.
"nanos": 42, # Number of nano (10^-9) units of the amount.
# The value must be between -999,999,999 and +999,999,999 inclusive.
# If `units` is positive, `nanos` must be positive or zero.
# If `units` is zero, `nanos` can be positive, zero, or negative.
# If `units` is negative, `nanos` must be negative or zero.
# For example $-1.75 is represented as `units`=-1 and `nanos`=-750,000,000.
"units": "A String", # The whole units of the amount.
# For example if `currencyCode` is `"USD"`, then 1 unit is one US dollar.
"currencyCode": "A String", # The 3-letter currency code defined in ISO 4217.
},
"labels": { # The labels describing the metric value.
# See comments on google.api.servicecontrol.v1.Operation.labels for
# the overriding relationship.
"a_key": "A String",
},
"doubleValue": 3.14, # A double precision floating point value.
"boolValue": True or False, # A boolean value.
"startTime": "A String", # The start of the time period over which this metric value's measurement
# applies. The time period has different semantics for different metric
# types (cumulative, delta, and gauge). See the metric definition
# documentation in the service configuration for details.
"distributionValue": { # Distribution represents a frequency distribution of double-valued sample # A distribution value.
# points. It contains the size of the population of sample points plus
# additional optional information:
#
# - the arithmetic mean of the samples
# - the minimum and maximum of the samples
# - the sum-squared-deviation of the samples, used to compute variance
# - a histogram of the values of the sample points
"count": "A String", # The total number of samples in the distribution. Must be >= 0.
"sumOfSquaredDeviation": 3.14, # The sum of squared deviations from the mean:
# Sum[i=1..count]((x_i - mean)^2)
# where each x_i is a sample values. If `count` is zero then this field
# must be zero, otherwise validation of the request fails.
"bucketCounts": [ # The number of samples in each histogram bucket. `bucket_counts` are
# optional. If present, they must sum to the `count` value.
#
# The buckets are defined below in `bucket_option`. There are N buckets.
# `bucket_counts[0]` is the number of samples in the underflow bucket.
# `bucket_counts[1]` to `bucket_counts[N-1]` are the numbers of samples
# in each of the finite buckets. And `bucket_counts[N] is the number
# of samples in the overflow bucket. See the comments of `bucket_option`
# below for more details.
#
# Any suffix of trailing zeros may be omitted.
"A String",
],
"exponentialBuckets": { # Describing buckets with exponentially growing width. # Buckets with exponentially growing width.
"scale": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be > 0.
"growthFactor": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be larger than 1.0.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
},
"maximum": 3.14, # The maximum of the population of values. Ignored if `count` is zero.
"minimum": 3.14, # The minimum of the population of values. Ignored if `count` is zero.
"linearBuckets": { # Describing buckets with constant width. # Buckets with constant width.
"width": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
# Must be strictly positive.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
"offset": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
},
"explicitBuckets": { # Describing buckets with arbitrary user-provided width. # Buckets with arbitrary user-provided width.
"bounds": [ # 'bound' is a list of strictly increasing boundaries between
# buckets. Note that a list of length N-1 defines N buckets because
# of fenceposting. See comments on `bucket_options` for details.
#
# The i'th finite bucket covers the interval
# [bound[i-1], bound[i])
# where i ranges from 1 to bound_size() - 1. Note that there are no
# finite buckets at all if 'bound' only contains a single element; in
# that special case the single bound defines the boundary between the
# underflow and overflow buckets.
#
# bucket number lower bound upper bound
# i == 0 (underflow) -inf bound[i]
# 0 < i < bound_size() bound[i-1] bound[i]
# i == bound_size() (overflow) bound[i-1] +inf
3.14,
],
},
"mean": 3.14, # The arithmetic mean of the samples in the distribution. If `count` is
# zero then this field must be zero.
},
"stringValue": "A String", # A text string value.
"int64Value": "A String", # A signed 64-bit integer value.
"endTime": "A String", # The end of the time period over which this metric value's measurement
# applies.
},
],
"metricName": "A String", # The metric name defined in the service configuration.
},
],
"methodName": "A String", # Fully qualified name of the API method for which this quota operation is
# requested. This name is used for matching quota rules or metric rules and
# billing status rules defined in service configuration. This field is not
# required if the quota operation is performed on non-API resources.
#
# Example of an RPC method name:
# google.example.library.v1.LibraryService.CreateShelf
"labels": { # Labels describing the operation.
"a_key": "A String",
},
"quotaMode": "A String", # Quota mode for this operation.
"consumerId": "A String", # Identity of the consumer for whom this quota operation is being performed.
#
# This can be in one of the following formats:
# project:<project_id>,
# project_number:<project_number>,
# api_key:<api_key>.
"operationId": "A String", # Identity of the operation. This must be unique within the scope of the
# service that generated the operation. If the service calls AllocateQuota
# and ReleaseQuota on the same operation, the two calls should carry the
# same ID.
#
# UUID version 4 is recommended, though not required. In scenarios where an
# operation is computed from existing information and an idempotent id is
# desirable for deduplication purpose, UUID version 5 is recommended. See
# RFC 4122 for details.
},
"serviceConfigId": "A String", # Specifies which version of service configuration should be used to process
# the request. If unspecified or no matching version can be found, the latest
# one will be used.
}
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Response message for the ReleaseQuota method.
"serviceConfigId": "A String", # ID of the actual config used to process the request.
"quotaMetrics": [ # Quota metrics to indicate the result of release. Depending on the
# request, one or more of the following metrics will be included:
#
# 1. For rate quota, per quota group or per quota metric released amount
# will be specified using the following delta metric:
# "serviceruntime.googleapis.com/api/consumer/quota_refund_count"
#
# 2. For allocation quota, per quota metric total usage will be specified
# using the following gauge metric:
# "serviceruntime.googleapis.com/allocation/consumer/quota_used_count"
#
# 3. For allocation quota, value for each quota limit associated with
# the metrics will be specified using the following gauge metric:
# "serviceruntime.googleapis.com/quota/limit"
{ # Represents a set of metric values in the same metric.
# Each metric value in the set should have a unique combination of start time,
# end time, and label values.
"metricValues": [ # The values in this metric.
{ # Represents a single metric value.
"moneyValue": { # Represents an amount of money with its currency type. # A money value.
"nanos": 42, # Number of nano (10^-9) units of the amount.
# The value must be between -999,999,999 and +999,999,999 inclusive.
# If `units` is positive, `nanos` must be positive or zero.
# If `units` is zero, `nanos` can be positive, zero, or negative.
# If `units` is negative, `nanos` must be negative or zero.
# For example $-1.75 is represented as `units`=-1 and `nanos`=-750,000,000.
"units": "A String", # The whole units of the amount.
# For example if `currencyCode` is `"USD"`, then 1 unit is one US dollar.
"currencyCode": "A String", # The 3-letter currency code defined in ISO 4217.
},
"labels": { # The labels describing the metric value.
# See comments on google.api.servicecontrol.v1.Operation.labels for
# the overriding relationship.
"a_key": "A String",
},
"doubleValue": 3.14, # A double precision floating point value.
"boolValue": True or False, # A boolean value.
"startTime": "A String", # The start of the time period over which this metric value's measurement
# applies. The time period has different semantics for different metric
# types (cumulative, delta, and gauge). See the metric definition
# documentation in the service configuration for details.
"distributionValue": { # Distribution represents a frequency distribution of double-valued sample # A distribution value.
# points. It contains the size of the population of sample points plus
# additional optional information:
#
# - the arithmetic mean of the samples
# - the minimum and maximum of the samples
# - the sum-squared-deviation of the samples, used to compute variance
# - a histogram of the values of the sample points
"count": "A String", # The total number of samples in the distribution. Must be >= 0.
"sumOfSquaredDeviation": 3.14, # The sum of squared deviations from the mean:
# Sum[i=1..count]((x_i - mean)^2)
# where each x_i is a sample values. If `count` is zero then this field
# must be zero, otherwise validation of the request fails.
"bucketCounts": [ # The number of samples in each histogram bucket. `bucket_counts` are
# optional. If present, they must sum to the `count` value.
#
# The buckets are defined below in `bucket_option`. There are N buckets.
# `bucket_counts[0]` is the number of samples in the underflow bucket.
# `bucket_counts[1]` to `bucket_counts[N-1]` are the numbers of samples
# in each of the finite buckets. And `bucket_counts[N] is the number
# of samples in the overflow bucket. See the comments of `bucket_option`
# below for more details.
#
# Any suffix of trailing zeros may be omitted.
"A String",
],
"exponentialBuckets": { # Describing buckets with exponentially growing width. # Buckets with exponentially growing width.
"scale": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be > 0.
"growthFactor": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be larger than 1.0.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
},
"maximum": 3.14, # The maximum of the population of values. Ignored if `count` is zero.
"minimum": 3.14, # The minimum of the population of values. Ignored if `count` is zero.
"linearBuckets": { # Describing buckets with constant width. # Buckets with constant width.
"width": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
# Must be strictly positive.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
"offset": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
},
"explicitBuckets": { # Describing buckets with arbitrary user-provided width. # Buckets with arbitrary user-provided width.
"bounds": [ # 'bound' is a list of strictly increasing boundaries between
# buckets. Note that a list of length N-1 defines N buckets because
# of fenceposting. See comments on `bucket_options` for details.
#
# The i'th finite bucket covers the interval
# [bound[i-1], bound[i])
# where i ranges from 1 to bound_size() - 1. Note that there are no
# finite buckets at all if 'bound' only contains a single element; in
# that special case the single bound defines the boundary between the
# underflow and overflow buckets.
#
# bucket number lower bound upper bound
# i == 0 (underflow) -inf bound[i]
# 0 < i < bound_size() bound[i-1] bound[i]
# i == bound_size() (overflow) bound[i-1] +inf
3.14,
],
},
"mean": 3.14, # The arithmetic mean of the samples in the distribution. If `count` is
# zero then this field must be zero.
},
"stringValue": "A String", # A text string value.
"int64Value": "A String", # A signed 64-bit integer value.
"endTime": "A String", # The end of the time period over which this metric value's measurement
# applies.
},
],
"metricName": "A String", # The metric name defined in the service configuration.
},
],
"releaseErrors": [ # Indicates the decision of the release.
{
"code": "A String", # Error code.
"description": "A String", # Free-form text that provides details on the cause of the error.
"subject": "A String", # Subject to whom this error applies. See the specific enum for more details
# on this field. For example, "clientip:<ip address of client>" or
# "project:<Google developer project id>".
},
],
"operationId": "A String", # The same operation_id value used in the ReleaseQuotaRequest. Used for
# logging and diagnostics purposes.
}</pre>
</div>
<div class="method">
<code class="details" id="report">report(serviceName, body, x__xgafv=None)</code>
<pre>Reports operation results to Google Service Control, such as logs and
metrics. It should be called after an operation is completed.
If feasible, the client should aggregate reporting data for up to 5
seconds to reduce API traffic. Limiting aggregation to 5 seconds is to
reduce data loss during client crashes. Clients should carefully choose
the aggregation time window to avoid data loss risk more than 0.01%
for business and compliance reasons.
NOTE: the `ReportRequest` has the size limit of 1MB.
This method requires the `servicemanagement.services.report` permission
on the specified service. For more information, see
[Google Cloud IAM](https://cloud.google.com/iam).
Args:
serviceName: string, The service name as specified in its service configuration. For example,
`"pubsub.googleapis.com"`.
See google.api.Service for the definition of a service name. (required)
body: object, The request body. (required)
The object takes the form of:
{ # Request message for the Report method.
"operations": [ # Operations to be reported.
#
# Typically the service should report one operation per request.
# Putting multiple operations into a single request is allowed, but should
# be used only when multiple operations are natually available at the time
# of the report.
#
# If multiple operations are in a single request, the total request size
# should be no larger than 1MB. See ReportResponse.report_errors for
# partial failure behavior.
{ # Represents information regarding an operation.
"labels": { # Labels describing the operation. Only the following labels are allowed:
#
# - Labels describing monitored resources as defined in
# the service configuration.
# - Default labels of metric values. When specified, labels defined in the
# metric value override these default.
# - The following labels defined by Google Cloud Platform:
# - `cloud.googleapis.com/location` describing the location where the
# operation happened,
# - `servicecontrol.googleapis.com/user_agent` describing the user agent
# of the API request,
# - `servicecontrol.googleapis.com/service_agent` describing the service
# used to handle the API request (e.g. ESP),
# - `servicecontrol.googleapis.com/platform` describing the platform
# where the API is served (e.g. GAE, GCE, GKE).
"a_key": "A String",
},
"metricValueSets": [ # Represents information about this operation. Each MetricValueSet
# corresponds to a metric defined in the service configuration.
# The data type used in the MetricValueSet must agree with
# the data type specified in the metric definition.
#
# Within a single operation, it is not allowed to have more than one
# MetricValue instances that have the same metric names and identical
# label value combinations. If a request has such duplicated MetricValue
# instances, the entire request is rejected with
# an invalid argument error.
{ # Represents a set of metric values in the same metric.
# Each metric value in the set should have a unique combination of start time,
# end time, and label values.
"metricValues": [ # The values in this metric.
{ # Represents a single metric value.
"moneyValue": { # Represents an amount of money with its currency type. # A money value.
"nanos": 42, # Number of nano (10^-9) units of the amount.
# The value must be between -999,999,999 and +999,999,999 inclusive.
# If `units` is positive, `nanos` must be positive or zero.
# If `units` is zero, `nanos` can be positive, zero, or negative.
# If `units` is negative, `nanos` must be negative or zero.
# For example $-1.75 is represented as `units`=-1 and `nanos`=-750,000,000.
"units": "A String", # The whole units of the amount.
# For example if `currencyCode` is `"USD"`, then 1 unit is one US dollar.
"currencyCode": "A String", # The 3-letter currency code defined in ISO 4217.
},
"labels": { # The labels describing the metric value.
# See comments on google.api.servicecontrol.v1.Operation.labels for
# the overriding relationship.
"a_key": "A String",
},
"doubleValue": 3.14, # A double precision floating point value.
"boolValue": True or False, # A boolean value.
"startTime": "A String", # The start of the time period over which this metric value's measurement
# applies. The time period has different semantics for different metric
# types (cumulative, delta, and gauge). See the metric definition
# documentation in the service configuration for details.
"distributionValue": { # Distribution represents a frequency distribution of double-valued sample # A distribution value.
# points. It contains the size of the population of sample points plus
# additional optional information:
#
# - the arithmetic mean of the samples
# - the minimum and maximum of the samples
# - the sum-squared-deviation of the samples, used to compute variance
# - a histogram of the values of the sample points
"count": "A String", # The total number of samples in the distribution. Must be >= 0.
"sumOfSquaredDeviation": 3.14, # The sum of squared deviations from the mean:
# Sum[i=1..count]((x_i - mean)^2)
# where each x_i is a sample values. If `count` is zero then this field
# must be zero, otherwise validation of the request fails.
"bucketCounts": [ # The number of samples in each histogram bucket. `bucket_counts` are
# optional. If present, they must sum to the `count` value.
#
# The buckets are defined below in `bucket_option`. There are N buckets.
# `bucket_counts[0]` is the number of samples in the underflow bucket.
# `bucket_counts[1]` to `bucket_counts[N-1]` are the numbers of samples
# in each of the finite buckets. And `bucket_counts[N] is the number
# of samples in the overflow bucket. See the comments of `bucket_option`
# below for more details.
#
# Any suffix of trailing zeros may be omitted.
"A String",
],
"exponentialBuckets": { # Describing buckets with exponentially growing width. # Buckets with exponentially growing width.
"scale": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be > 0.
"growthFactor": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be larger than 1.0.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
},
"maximum": 3.14, # The maximum of the population of values. Ignored if `count` is zero.
"minimum": 3.14, # The minimum of the population of values. Ignored if `count` is zero.
"linearBuckets": { # Describing buckets with constant width. # Buckets with constant width.
"width": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
# Must be strictly positive.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
"offset": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
},
"explicitBuckets": { # Describing buckets with arbitrary user-provided width. # Buckets with arbitrary user-provided width.
"bounds": [ # 'bound' is a list of strictly increasing boundaries between
# buckets. Note that a list of length N-1 defines N buckets because
# of fenceposting. See comments on `bucket_options` for details.
#
# The i'th finite bucket covers the interval
# [bound[i-1], bound[i])
# where i ranges from 1 to bound_size() - 1. Note that there are no
# finite buckets at all if 'bound' only contains a single element; in
# that special case the single bound defines the boundary between the
# underflow and overflow buckets.
#
# bucket number lower bound upper bound
# i == 0 (underflow) -inf bound[i]
# 0 < i < bound_size() bound[i-1] bound[i]
# i == bound_size() (overflow) bound[i-1] +inf
3.14,
],
},
"mean": 3.14, # The arithmetic mean of the samples in the distribution. If `count` is
# zero then this field must be zero.
},
"stringValue": "A String", # A text string value.
"int64Value": "A String", # A signed 64-bit integer value.
"endTime": "A String", # The end of the time period over which this metric value's measurement
# applies.
},
],
"metricName": "A String", # The metric name defined in the service configuration.
},
],
"importance": "A String", # DO NOT USE. This is an experimental field.
"operationName": "A String", # Fully qualified name of the operation. Reserved for future use.
"resourceContainer": "A String", # The resource name of the parent of a resource in the resource hierarchy.
#
# This can be in one of the following formats:
# - “projects/<project-id or project-number>”
# - “folders/<folder-id>”
# - “organizations/<organization-id>”
"quotaProperties": { # Represents the properties needed for quota operations. # Represents the properties needed for quota check. Applicable only if this
# operation is for a quota check request.
"quotaMode": "A String", # Quota mode for this operation.
"limitByIds": { # LimitType IDs that should be used for checking quota. Key in this map
# should be a valid LimitType string, and the value is the ID to be used. For
# example, an entry <USER, 123> will cause all user quota limits to use 123
# as the user ID. See google/api/quota.proto for the definition of LimitType.
# CLIENT_PROJECT: Not supported.
# USER: Value of this entry will be used for enforcing user-level quota
# limits. If none specified, caller IP passed in the
# servicecontrol.googleapis.com/caller_ip label will be used instead.
# If the server cannot resolve a value for this LimitType, an error
# will be thrown. No validation will be performed on this ID.
# Deprecated: use servicecontrol.googleapis.com/user label to send user ID.
"a_key": "A String",
},
},
"consumerId": "A String", # Identity of the consumer who is using the service.
# This field should be filled in for the operations initiated by a
# consumer, but not for service-initiated operations that are
# not related to a specific consumer.
#
# This can be in one of the following formats:
# project:<project_id>,
# project_number:<project_number>,
# api_key:<api_key>.
"userLabels": { # User defined labels for the resource that this operation is associated
# with.
"a_key": "A String",
},
"logEntries": [ # Represents information to be logged.
{ # An individual log entry.
"severity": "A String", # The severity of the log entry. The default value is
# `LogSeverity.DEFAULT`.
"textPayload": "A String", # The log entry payload, represented as a Unicode string (UTF-8).
"timestamp": "A String", # The time the event described by the log entry occurred. If
# omitted, defaults to operation start time.
"labels": { # A set of user-defined (key, value) data that provides additional
# information about the log entry.
"a_key": "A String",
},
"structPayload": { # The log entry payload, represented as a structure that
# is expressed as a JSON object.
"a_key": "", # Properties of the object.
},
"insertId": "A String", # A unique ID for the log entry used for deduplication. If omitted,
# the implementation will generate one based on operation_id.
"protoPayload": { # The log entry payload, represented as a protocol buffer that is
# expressed as a JSON object. You can only pass `protoPayload`
# values that belong to a set of approved types.
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
"name": "A String", # Required. The log to which this log entry belongs. Examples: `"syslog"`,
# `"book_log"`.
},
],
"startTime": "A String", # Required. Start time of the operation.
"endTime": "A String", # End time of the operation.
# Required when the operation is used in ServiceController.Report,
# but optional when the operation is used in ServiceController.Check.
"operationId": "A String", # Identity of the operation. This must be unique within the scope of the
# service that generated the operation. If the service calls
# Check() and Report() on the same operation, the two calls should carry
# the same id.
#
# UUID version 4 is recommended, though not required.
# In scenarios where an operation is computed from existing information
# and an idempotent id is desirable for deduplication purpose, UUID version 5
# is recommended. See RFC 4122 for details.
},
],
"serviceConfigId": "A String", # Specifies which version of service config should be used to process the
# request.
#
# If unspecified or no matching version can be found, the
# latest one will be used.
}
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{ # Response message for the Report method.
"reportErrors": [ # Partial failures, one for each `Operation` in the request that failed
# processing. There are three possible combinations of the RPC status:
#
# 1. The combination of a successful RPC status and an empty `report_errors`
# list indicates a complete success where all `Operations` in the
# request are processed successfully.
# 2. The combination of a successful RPC status and a non-empty
# `report_errors` list indicates a partial success where some
# `Operations` in the request succeeded. Each
# `Operation` that failed processing has a corresponding item
# in this list.
# 3. A failed RPC status indicates a general non-deterministic failure.
# When this happens, it's impossible to know which of the
# 'Operations' in the request succeeded or failed.
{ # Represents the processing error of one `Operation` in the request.
"status": { # The `Status` type defines a logical error model that is suitable for different # Details of the error when processing the `Operation`.
# programming environments, including REST APIs and RPC APIs. It is used by
# [gRPC](https://github.com/grpc). The error model is designed to be:
#
# - Simple to use and understand for most users
# - Flexible enough to meet unexpected needs
#
# # Overview
#
# The `Status` message contains three pieces of data: error code, error message,
# and error details. The error code should be an enum value of
# google.rpc.Code, but it may accept additional error codes if needed. The
# error message should be a developer-facing English message that helps
# developers *understand* and *resolve* the error. If a localized user-facing
# error message is needed, put the localized message in the error details or
# localize it in the client. The optional error details may contain arbitrary
# information about the error. There is a predefined set of error detail types
# in the package `google.rpc` that can be used for common error conditions.
#
# # Language mapping
#
# The `Status` message is the logical representation of the error model, but it
# is not necessarily the actual wire format. When the `Status` message is
# exposed in different client libraries and different wire protocols, it can be
# mapped differently. For example, it will likely be mapped to some exceptions
# in Java, but more likely mapped to some error codes in C.
#
# # Other uses
#
# The error model and the `Status` message can be used in a variety of
# environments, either with or without APIs, to provide a
# consistent developer experience across different environments.
#
# Example uses of this error model include:
#
# - Partial errors. If a service needs to return partial errors to the client,
# it may embed the `Status` in the normal response to indicate the partial
# errors.
#
# - Workflow errors. A typical workflow has multiple steps. Each step may
# have a `Status` message for error reporting.
#
# - Batch operations. If a client uses batch request and batch response, the
# `Status` message should be used directly inside batch response, one for
# each error sub-response.
#
# - Asynchronous operations. If an API call embeds asynchronous operation
# results in its response, the status of those operations should be
# represented directly using the `Status` message.
#
# - Logging. If some API errors are stored in logs, the message `Status` could
# be used directly after any stripping needed for security/privacy reasons.
"message": "A String", # A developer-facing error message, which should be in English. Any
# user-facing error message should be localized and sent in the
# google.rpc.Status.details field, or localized by the client.
"code": 42, # The status code, which should be an enum value of google.rpc.Code.
"details": [ # A list of messages that carry the error details. There will be a
# common set of message types for APIs to use.
{
"a_key": "", # Properties of the object. Contains field @type with type URL.
},
],
},
"operationId": "A String", # The Operation.operation_id value from the request.
},
],
"reportInfos": [ # Quota usage for each quota release `Operation` request.
#
# Fully or partially failed quota release request may or may not be present
# in `report_quota_info`. For example, a failed quota release request will
# have the current quota usage info when precise quota library returns the
# info. A deadline exceeded quota request will not have quota usage info.
#
# If there is no quota release request, report_quota_info will be empty.
{
"quotaInfo": { # Contains the quota information for a quota check response. # Quota usage info when processing the `Operation`.
"quotaMetrics": [ # Quota metrics to indicate the usage. Depending on the check request, one or
# more of the following metrics will be included:
#
# 1. For rate quota, per quota group or per quota metric incremental usage
# will be specified using the following delta metric:
# "serviceruntime.googleapis.com/api/consumer/quota_used_count"
#
# 2. For allocation quota, per quota metric total usage will be specified
# using the following gauge metric:
# "serviceruntime.googleapis.com/allocation/consumer/quota_used_count"
#
# 3. For both rate quota and allocation quota, the quota limit reached
# condition will be specified using the following boolean metric:
# "serviceruntime.googleapis.com/quota/exceeded"
{ # Represents a set of metric values in the same metric.
# Each metric value in the set should have a unique combination of start time,
# end time, and label values.
"metricValues": [ # The values in this metric.
{ # Represents a single metric value.
"moneyValue": { # Represents an amount of money with its currency type. # A money value.
"nanos": 42, # Number of nano (10^-9) units of the amount.
# The value must be between -999,999,999 and +999,999,999 inclusive.
# If `units` is positive, `nanos` must be positive or zero.
# If `units` is zero, `nanos` can be positive, zero, or negative.
# If `units` is negative, `nanos` must be negative or zero.
# For example $-1.75 is represented as `units`=-1 and `nanos`=-750,000,000.
"units": "A String", # The whole units of the amount.
# For example if `currencyCode` is `"USD"`, then 1 unit is one US dollar.
"currencyCode": "A String", # The 3-letter currency code defined in ISO 4217.
},
"labels": { # The labels describing the metric value.
# See comments on google.api.servicecontrol.v1.Operation.labels for
# the overriding relationship.
"a_key": "A String",
},
"doubleValue": 3.14, # A double precision floating point value.
"boolValue": True or False, # A boolean value.
"startTime": "A String", # The start of the time period over which this metric value's measurement
# applies. The time period has different semantics for different metric
# types (cumulative, delta, and gauge). See the metric definition
# documentation in the service configuration for details.
"distributionValue": { # Distribution represents a frequency distribution of double-valued sample # A distribution value.
# points. It contains the size of the population of sample points plus
# additional optional information:
#
# - the arithmetic mean of the samples
# - the minimum and maximum of the samples
# - the sum-squared-deviation of the samples, used to compute variance
# - a histogram of the values of the sample points
"count": "A String", # The total number of samples in the distribution. Must be >= 0.
"sumOfSquaredDeviation": 3.14, # The sum of squared deviations from the mean:
# Sum[i=1..count]((x_i - mean)^2)
# where each x_i is a sample values. If `count` is zero then this field
# must be zero, otherwise validation of the request fails.
"bucketCounts": [ # The number of samples in each histogram bucket. `bucket_counts` are
# optional. If present, they must sum to the `count` value.
#
# The buckets are defined below in `bucket_option`. There are N buckets.
# `bucket_counts[0]` is the number of samples in the underflow bucket.
# `bucket_counts[1]` to `bucket_counts[N-1]` are the numbers of samples
# in each of the finite buckets. And `bucket_counts[N] is the number
# of samples in the overflow bucket. See the comments of `bucket_option`
# below for more details.
#
# Any suffix of trailing zeros may be omitted.
"A String",
],
"exponentialBuckets": { # Describing buckets with exponentially growing width. # Buckets with exponentially growing width.
"scale": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be > 0.
"growthFactor": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be larger than 1.0.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
},
"maximum": 3.14, # The maximum of the population of values. Ignored if `count` is zero.
"minimum": 3.14, # The minimum of the population of values. Ignored if `count` is zero.
"linearBuckets": { # Describing buckets with constant width. # Buckets with constant width.
"width": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
# Must be strictly positive.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
"offset": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
},
"explicitBuckets": { # Describing buckets with arbitrary user-provided width. # Buckets with arbitrary user-provided width.
"bounds": [ # 'bound' is a list of strictly increasing boundaries between
# buckets. Note that a list of length N-1 defines N buckets because
# of fenceposting. See comments on `bucket_options` for details.
#
# The i'th finite bucket covers the interval
# [bound[i-1], bound[i])
# where i ranges from 1 to bound_size() - 1. Note that there are no
# finite buckets at all if 'bound' only contains a single element; in
# that special case the single bound defines the boundary between the
# underflow and overflow buckets.
#
# bucket number lower bound upper bound
# i == 0 (underflow) -inf bound[i]
# 0 < i < bound_size() bound[i-1] bound[i]
# i == bound_size() (overflow) bound[i-1] +inf
3.14,
],
},
"mean": 3.14, # The arithmetic mean of the samples in the distribution. If `count` is
# zero then this field must be zero.
},
"stringValue": "A String", # A text string value.
"int64Value": "A String", # A signed 64-bit integer value.
"endTime": "A String", # The end of the time period over which this metric value's measurement
# applies.
},
],
"metricName": "A String", # The metric name defined in the service configuration.
},
],
"limitExceeded": [ # Quota Metrics that have exceeded quota limits.
# For QuotaGroup-based quota, this is QuotaGroup.name
# For QuotaLimit-based quota, this is QuotaLimit.name
# See: google.api.Quota
# Deprecated: Use quota_metrics to get per quota group limit exceeded status.
"A String",
],
"quotaConsumed": { # Map of quota group name to the actual number of tokens consumed. If the
# quota check was not successful, then this will not be populated due to no
# quota consumption.
# Deprecated: Use quota_metrics to get per quota group usage.
"a_key": 42,
},
},
"operationId": "A String", # The Operation.operation_id value from the request.
},
],
"serviceConfigId": "A String", # The actual config id used to process the request.
}</pre>
</div>
<div class="method">
<code class="details" id="startReconciliation">startReconciliation(serviceName, body, x__xgafv=None)</code>
<pre>Unlike rate quota, allocation quota does not get refilled periodically.
So, it is possible that the quota usage as seen by the service differs from
what the One Platform considers the usage is. This is expected to happen
only rarely, but over time this can accumulate. Services can invoke
StartReconciliation and EndReconciliation to correct this usage drift, as
described below:
1. Service sends StartReconciliation with a timestamp in future for each
metric that needs to be reconciled. The timestamp being in future allows
to account for in-flight AllocateQuota and ReleaseQuota requests for the
same metric.
2. One Platform records this timestamp and starts tracking subsequent
AllocateQuota and ReleaseQuota requests until EndReconciliation is
called.
3. At or after the time specified in the StartReconciliation, service
sends EndReconciliation with the usage that needs to be reconciled to.
4. One Platform adjusts its own record of usage for that metric to the
value specified in EndReconciliation by taking in to account any
allocation or release between StartReconciliation and EndReconciliation.
Signals the quota controller that the service wants to perform a usage
reconciliation as specified in the request.
This method requires the `servicemanagement.services.quota`
permission on the specified service. For more information, see
[Google Cloud IAM](https://cloud.google.com/iam).
Args:
serviceName: string, Name of the service as specified in the service configuration. For example,
`"pubsub.googleapis.com"`.
See google.api.Service for the definition of a service name. (required)
body: object, The request body. (required)
The object takes the form of:
{
"serviceConfigId": "A String", # Specifies which version of service configuration should be used to process
# the request. If unspecified or no matching version can be found, the latest
# one will be used.
"reconciliationOperation": { # Represents information regarding a quota operation. # Operation that describes the quota reconciliation.
"quotaMetrics": [ # Represents information about this operation. Each MetricValueSet
# corresponds to a metric defined in the service configuration.
# The data type used in the MetricValueSet must agree with
# the data type specified in the metric definition.
#
# Within a single operation, it is not allowed to have more than one
# MetricValue instances that have the same metric names and identical
# label value combinations. If a request has such duplicated MetricValue
# instances, the entire request is rejected with
# an invalid argument error.
{ # Represents a set of metric values in the same metric.
# Each metric value in the set should have a unique combination of start time,
# end time, and label values.
"metricValues": [ # The values in this metric.
{ # Represents a single metric value.
"moneyValue": { # Represents an amount of money with its currency type. # A money value.
"nanos": 42, # Number of nano (10^-9) units of the amount.
# The value must be between -999,999,999 and +999,999,999 inclusive.
# If `units` is positive, `nanos` must be positive or zero.
# If `units` is zero, `nanos` can be positive, zero, or negative.
# If `units` is negative, `nanos` must be negative or zero.
# For example $-1.75 is represented as `units`=-1 and `nanos`=-750,000,000.
"units": "A String", # The whole units of the amount.
# For example if `currencyCode` is `"USD"`, then 1 unit is one US dollar.
"currencyCode": "A String", # The 3-letter currency code defined in ISO 4217.
},
"labels": { # The labels describing the metric value.
# See comments on google.api.servicecontrol.v1.Operation.labels for
# the overriding relationship.
"a_key": "A String",
},
"doubleValue": 3.14, # A double precision floating point value.
"boolValue": True or False, # A boolean value.
"startTime": "A String", # The start of the time period over which this metric value's measurement
# applies. The time period has different semantics for different metric
# types (cumulative, delta, and gauge). See the metric definition
# documentation in the service configuration for details.
"distributionValue": { # Distribution represents a frequency distribution of double-valued sample # A distribution value.
# points. It contains the size of the population of sample points plus
# additional optional information:
#
# - the arithmetic mean of the samples
# - the minimum and maximum of the samples
# - the sum-squared-deviation of the samples, used to compute variance
# - a histogram of the values of the sample points
"count": "A String", # The total number of samples in the distribution. Must be >= 0.
"sumOfSquaredDeviation": 3.14, # The sum of squared deviations from the mean:
# Sum[i=1..count]((x_i - mean)^2)
# where each x_i is a sample values. If `count` is zero then this field
# must be zero, otherwise validation of the request fails.
"bucketCounts": [ # The number of samples in each histogram bucket. `bucket_counts` are
# optional. If present, they must sum to the `count` value.
#
# The buckets are defined below in `bucket_option`. There are N buckets.
# `bucket_counts[0]` is the number of samples in the underflow bucket.
# `bucket_counts[1]` to `bucket_counts[N-1]` are the numbers of samples
# in each of the finite buckets. And `bucket_counts[N] is the number
# of samples in the overflow bucket. See the comments of `bucket_option`
# below for more details.
#
# Any suffix of trailing zeros may be omitted.
"A String",
],
"exponentialBuckets": { # Describing buckets with exponentially growing width. # Buckets with exponentially growing width.
"scale": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be > 0.
"growthFactor": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be larger than 1.0.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
},
"maximum": 3.14, # The maximum of the population of values. Ignored if `count` is zero.
"minimum": 3.14, # The minimum of the population of values. Ignored if `count` is zero.
"linearBuckets": { # Describing buckets with constant width. # Buckets with constant width.
"width": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
# Must be strictly positive.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
"offset": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
},
"explicitBuckets": { # Describing buckets with arbitrary user-provided width. # Buckets with arbitrary user-provided width.
"bounds": [ # 'bound' is a list of strictly increasing boundaries between
# buckets. Note that a list of length N-1 defines N buckets because
# of fenceposting. See comments on `bucket_options` for details.
#
# The i'th finite bucket covers the interval
# [bound[i-1], bound[i])
# where i ranges from 1 to bound_size() - 1. Note that there are no
# finite buckets at all if 'bound' only contains a single element; in
# that special case the single bound defines the boundary between the
# underflow and overflow buckets.
#
# bucket number lower bound upper bound
# i == 0 (underflow) -inf bound[i]
# 0 < i < bound_size() bound[i-1] bound[i]
# i == bound_size() (overflow) bound[i-1] +inf
3.14,
],
},
"mean": 3.14, # The arithmetic mean of the samples in the distribution. If `count` is
# zero then this field must be zero.
},
"stringValue": "A String", # A text string value.
"int64Value": "A String", # A signed 64-bit integer value.
"endTime": "A String", # The end of the time period over which this metric value's measurement
# applies.
},
],
"metricName": "A String", # The metric name defined in the service configuration.
},
],
"methodName": "A String", # Fully qualified name of the API method for which this quota operation is
# requested. This name is used for matching quota rules or metric rules and
# billing status rules defined in service configuration. This field is not
# required if the quota operation is performed on non-API resources.
#
# Example of an RPC method name:
# google.example.library.v1.LibraryService.CreateShelf
"labels": { # Labels describing the operation.
"a_key": "A String",
},
"quotaMode": "A String", # Quota mode for this operation.
"consumerId": "A String", # Identity of the consumer for whom this quota operation is being performed.
#
# This can be in one of the following formats:
# project:<project_id>,
# project_number:<project_number>,
# api_key:<api_key>.
"operationId": "A String", # Identity of the operation. This must be unique within the scope of the
# service that generated the operation. If the service calls AllocateQuota
# and ReleaseQuota on the same operation, the two calls should carry the
# same ID.
#
# UUID version 4 is recommended, though not required. In scenarios where an
# operation is computed from existing information and an idempotent id is
# desirable for deduplication purpose, UUID version 5 is recommended. See
# RFC 4122 for details.
},
}
x__xgafv: string, V1 error format.
Allowed values
1 - v1 error format
2 - v2 error format
Returns:
An object of the form:
{
"serviceConfigId": "A String", # ID of the actual config used to process the request.
"quotaMetrics": [ # Metric values as tracked by One Platform before the start of
# reconciliation. The following metrics will be included:
#
# 1. Per quota metric total usage will be specified using the following gauge
# metric:
# "serviceruntime.googleapis.com/allocation/consumer/quota_used_count"
#
# 2. Value for each quota limit associated with the metrics will be specified
# using the following gauge metric:
# "serviceruntime.googleapis.com/quota/limit"
{ # Represents a set of metric values in the same metric.
# Each metric value in the set should have a unique combination of start time,
# end time, and label values.
"metricValues": [ # The values in this metric.
{ # Represents a single metric value.
"moneyValue": { # Represents an amount of money with its currency type. # A money value.
"nanos": 42, # Number of nano (10^-9) units of the amount.
# The value must be between -999,999,999 and +999,999,999 inclusive.
# If `units` is positive, `nanos` must be positive or zero.
# If `units` is zero, `nanos` can be positive, zero, or negative.
# If `units` is negative, `nanos` must be negative or zero.
# For example $-1.75 is represented as `units`=-1 and `nanos`=-750,000,000.
"units": "A String", # The whole units of the amount.
# For example if `currencyCode` is `"USD"`, then 1 unit is one US dollar.
"currencyCode": "A String", # The 3-letter currency code defined in ISO 4217.
},
"labels": { # The labels describing the metric value.
# See comments on google.api.servicecontrol.v1.Operation.labels for
# the overriding relationship.
"a_key": "A String",
},
"doubleValue": 3.14, # A double precision floating point value.
"boolValue": True or False, # A boolean value.
"startTime": "A String", # The start of the time period over which this metric value's measurement
# applies. The time period has different semantics for different metric
# types (cumulative, delta, and gauge). See the metric definition
# documentation in the service configuration for details.
"distributionValue": { # Distribution represents a frequency distribution of double-valued sample # A distribution value.
# points. It contains the size of the population of sample points plus
# additional optional information:
#
# - the arithmetic mean of the samples
# - the minimum and maximum of the samples
# - the sum-squared-deviation of the samples, used to compute variance
# - a histogram of the values of the sample points
"count": "A String", # The total number of samples in the distribution. Must be >= 0.
"sumOfSquaredDeviation": 3.14, # The sum of squared deviations from the mean:
# Sum[i=1..count]((x_i - mean)^2)
# where each x_i is a sample values. If `count` is zero then this field
# must be zero, otherwise validation of the request fails.
"bucketCounts": [ # The number of samples in each histogram bucket. `bucket_counts` are
# optional. If present, they must sum to the `count` value.
#
# The buckets are defined below in `bucket_option`. There are N buckets.
# `bucket_counts[0]` is the number of samples in the underflow bucket.
# `bucket_counts[1]` to `bucket_counts[N-1]` are the numbers of samples
# in each of the finite buckets. And `bucket_counts[N] is the number
# of samples in the overflow bucket. See the comments of `bucket_option`
# below for more details.
#
# Any suffix of trailing zeros may be omitted.
"A String",
],
"exponentialBuckets": { # Describing buckets with exponentially growing width. # Buckets with exponentially growing width.
"scale": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be > 0.
"growthFactor": 3.14, # The i'th exponential bucket covers the interval
# [scale * growth_factor^(i-1), scale * growth_factor^i)
# where i ranges from 1 to num_finite_buckets inclusive.
# Must be larger than 1.0.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
},
"maximum": 3.14, # The maximum of the population of values. Ignored if `count` is zero.
"minimum": 3.14, # The minimum of the population of values. Ignored if `count` is zero.
"linearBuckets": { # Describing buckets with constant width. # Buckets with constant width.
"width": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
# Must be strictly positive.
"numFiniteBuckets": 42, # The number of finite buckets. With the underflow and overflow buckets,
# the total number of buckets is `num_finite_buckets` + 2.
# See comments on `bucket_options` for details.
"offset": 3.14, # The i'th linear bucket covers the interval
# [offset + (i-1) * width, offset + i * width)
# where i ranges from 1 to num_finite_buckets, inclusive.
},
"explicitBuckets": { # Describing buckets with arbitrary user-provided width. # Buckets with arbitrary user-provided width.
"bounds": [ # 'bound' is a list of strictly increasing boundaries between
# buckets. Note that a list of length N-1 defines N buckets because
# of fenceposting. See comments on `bucket_options` for details.
#
# The i'th finite bucket covers the interval
# [bound[i-1], bound[i])
# where i ranges from 1 to bound_size() - 1. Note that there are no
# finite buckets at all if 'bound' only contains a single element; in
# that special case the single bound defines the boundary between the
# underflow and overflow buckets.
#
# bucket number lower bound upper bound
# i == 0 (underflow) -inf bound[i]
# 0 < i < bound_size() bound[i-1] bound[i]
# i == bound_size() (overflow) bound[i-1] +inf
3.14,
],
},
"mean": 3.14, # The arithmetic mean of the samples in the distribution. If `count` is
# zero then this field must be zero.
},
"stringValue": "A String", # A text string value.
"int64Value": "A String", # A signed 64-bit integer value.
"endTime": "A String", # The end of the time period over which this metric value's measurement
# applies.
},
],
"metricName": "A String", # The metric name defined in the service configuration.
},
],
"reconciliationErrors": [ # Indicates the decision of the reconciliation start.
{
"code": "A String", # Error code.
"description": "A String", # Free-form text that provides details on the cause of the error.
"subject": "A String", # Subject to whom this error applies. See the specific enum for more details
# on this field. For example, "clientip:<ip address of client>" or
# "project:<Google developer project id>".
},
],
"operationId": "A String", # The same operation_id value used in the StartReconciliationRequest. Used
# for logging and diagnostics purposes.
}</pre>
</div>
</body></html>