/** @file
PCI CF8 Library functions that use I/O ports 0xCF8 and 0xCFC to perform PCI Configuration cycles.
Layers on top of an I/O Library instance.
Copyright (c) 2006 - 2012, Intel Corporation. All rights reserved.<BR>
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
http://opensource.org/licenses/bsd-license.php.
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
**/
#include <Base.h>
#include <Library/BaseLib.h>
#include <Library/PciCf8Lib.h>
#include <Library/IoLib.h>
#include <Library/DebugLib.h>
//
// Declare I/O Ports used to perform PCI Confguration Cycles
//
#define PCI_CONFIGURATION_ADDRESS_PORT 0xCF8
#define PCI_CONFIGURATION_DATA_PORT 0xCFC
/**
Convert a PCI Library address to PCI CF8 formatted address.
Declare macro to convert PCI Library address to PCI CF8 formatted address.
Bit fields of PCI Library and CF8 formatted address is as follows:
PCI Library formatted address CF8 Formatted Address
============================= ======================
Bits 00..11 Register Bits 00..07 Register
Bits 12..14 Function Bits 08..10 Function
Bits 15..19 Device Bits 11..15 Device
Bits 20..27 Bus Bits 16..23 Bus
Bits 28..31 Reserved(MBZ) Bits 24..30 Reserved(MBZ)
Bits 31..31 Must be 1
@param A The address to convert.
@retval The coverted address.
**/
#define PCI_TO_CF8_ADDRESS(A) \
((UINT32) ((((A) >> 4) & 0x00ffff00) | ((A) & 0xfc) | 0x80000000))
/**
Assert the validity of a PCI CF8 address. A valid PCI CF8 address should contain 1's
only in the low 28 bits, excluding bits 08..11.
@param A The address to validate.
@param M Additional bits to assert to be zero.
**/
#define ASSERT_INVALID_PCI_ADDRESS(A,M) \
ASSERT (((A) & (~0xffff0ff | (M))) == 0)
/**
Registers a PCI device so PCI configuration registers may be accessed after
SetVirtualAddressMap().
Registers the PCI device specified by Address so all the PCI configuration registers
associated with that PCI device may be accessed after SetVirtualAddressMap() is called.
If Address > 0x0FFFFFFF, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
@param Address The address that encodes the PCI Bus, Device, Function and
Register.
@retval RETURN_SUCCESS The PCI device was registered for runtime access.
@retval RETURN_UNSUPPORTED An attempt was made to call this function
after ExitBootServices().
@retval RETURN_UNSUPPORTED The resources required to access the PCI device
at runtime could not be mapped.
@retval RETURN_OUT_OF_RESOURCES There are not enough resources available to
complete the registration.
**/
RETURN_STATUS
EFIAPI
PciCf8RegisterForRuntimeAccess (
IN UINTN Address
)
{
ASSERT_INVALID_PCI_ADDRESS (Address, 0);
return RETURN_SUCCESS;
}
/**
Reads an 8-bit PCI configuration register.
Reads and returns the 8-bit PCI configuration register specified by Address.
This function must guarantee that all PCI read and write operations are
serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
@param Address The address that encodes the PCI Bus, Device, Function and
Register.
@return The read value from the PCI configuration register.
**/
UINT8
EFIAPI
PciCf8Read8 (
IN UINTN Address
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT8 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 0);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoRead8 (PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3));
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Writes an 8-bit PCI configuration register.
Writes the 8-bit PCI configuration register specified by Address with the
value specified by Value. Value is returned. This function must guarantee
that all PCI read and write operations are serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
@param Address The address that encodes the PCI Bus, Device, Function and
Register.
@param Value The value to write.
@return The value written to the PCI configuration register.
**/
UINT8
EFIAPI
PciCf8Write8 (
IN UINTN Address,
IN UINT8 Value
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT8 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 0);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoWrite8 (
PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),
Value
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Performs a bitwise OR of an 8-bit PCI configuration register with
an 8-bit value.
Reads the 8-bit PCI configuration register specified by Address, performs a
bitwise OR between the read result and the value specified by
OrData, and writes the result to the 8-bit PCI configuration register
specified by Address. The value written to the PCI configuration register is
returned. This function must guarantee that all PCI read and write operations
are serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
@param Address The address that encodes the PCI Bus, Device, Function and
Register.
@param OrData The value to OR with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT8
EFIAPI
PciCf8Or8 (
IN UINTN Address,
IN UINT8 OrData
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT8 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 0);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoOr8 (
PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),
OrData
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit
value.
Reads the 8-bit PCI configuration register specified by Address, performs a
bitwise AND between the read result and the value specified by AndData, and
writes the result to the 8-bit PCI configuration register specified by
Address. The value written to the PCI configuration register is returned.
This function must guarantee that all PCI read and write operations are
serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
@param Address The address that encodes the PCI Bus, Device, Function and
Register.
@param AndData The value to AND with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT8
EFIAPI
PciCf8And8 (
IN UINTN Address,
IN UINT8 AndData
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT8 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 0);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoAnd8 (
PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),
AndData
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit
value, followed a bitwise OR with another 8-bit value.
Reads the 8-bit PCI configuration register specified by Address, performs a
bitwise AND between the read result and the value specified by AndData,
performs a bitwise OR between the result of the AND operation and
the value specified by OrData, and writes the result to the 8-bit PCI
configuration register specified by Address. The value written to the PCI
configuration register is returned. This function must guarantee that all PCI
read and write operations are serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
@param Address The address that encodes the PCI Bus, Device, Function and
Register.
@param AndData The value to AND with the PCI configuration register.
@param OrData The value to OR with the result of the AND operation.
@return The value written back to the PCI configuration register.
**/
UINT8
EFIAPI
PciCf8AndThenOr8 (
IN UINTN Address,
IN UINT8 AndData,
IN UINT8 OrData
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT8 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 0);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoAndThenOr8 (
PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),
AndData,
OrData
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Reads a bit field of a PCI configuration register.
Reads the bit field in an 8-bit PCI configuration register. The bit field is
specified by the StartBit and the EndBit. The value of the bit field is
returned.
If Address > 0x0FFFFFFF, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
If StartBit is greater than 7, then ASSERT().
If EndBit is greater than 7, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
@param Address The PCI configuration register to read.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..7.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..7.
@return The value of the bit field read from the PCI configuration register.
**/
UINT8
EFIAPI
PciCf8BitFieldRead8 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT8 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 0);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoBitFieldRead8 (
PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),
StartBit,
EndBit
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Writes a bit field to a PCI configuration register.
Writes Value to the bit field of the PCI configuration register. The bit
field is specified by the StartBit and the EndBit. All other bits in the
destination PCI configuration register are preserved. The new value of the
8-bit register is returned.
If Address > 0x0FFFFFFF, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
If StartBit is greater than 7, then ASSERT().
If EndBit is greater than 7, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
@param Address The PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..7.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..7.
@param Value The new value of the bit field.
@return The value written back to the PCI configuration register.
**/
UINT8
EFIAPI
PciCf8BitFieldWrite8 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT8 Value
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT8 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 0);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoBitFieldWrite8 (
PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),
StartBit,
EndBit,
Value
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and
writes the result back to the bit field in the 8-bit port.
Reads the 8-bit PCI configuration register specified by Address, performs a
bitwise OR between the read result and the value specified by
OrData, and writes the result to the 8-bit PCI configuration register
specified by Address. The value written to the PCI configuration register is
returned. This function must guarantee that all PCI read and write operations
are serialized. Extra left bits in OrData are stripped.
If Address > 0x0FFFFFFF, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
If StartBit is greater than 7, then ASSERT().
If EndBit is greater than 7, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
@param Address The PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..7.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..7.
@param OrData The value to OR with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT8
EFIAPI
PciCf8BitFieldOr8 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT8 OrData
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT8 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 0);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoBitFieldOr8 (
PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),
StartBit,
EndBit,
OrData
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Reads a bit field in an 8-bit PCI configuration register, performs a bitwise
AND, and writes the result back to the bit field in the 8-bit register.
Reads the 8-bit PCI configuration register specified by Address, performs a
bitwise AND between the read result and the value specified by AndData, and
writes the result to the 8-bit PCI configuration register specified by
Address. The value written to the PCI configuration register is returned.
This function must guarantee that all PCI read and write operations are
serialized. Extra left bits in AndData are stripped.
If Address > 0x0FFFFFFF, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
If StartBit is greater than 7, then ASSERT().
If EndBit is greater than 7, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
@param Address The PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..7.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..7.
@param AndData The value to AND with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT8
EFIAPI
PciCf8BitFieldAnd8 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT8 AndData
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT8 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 0);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoBitFieldAnd8 (
PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),
StartBit,
EndBit,
AndData
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Reads a bit field in an 8-bit port, performs a bitwise AND followed by a
bitwise OR, and writes the result back to the bit field in the
8-bit port.
Reads the 8-bit PCI configuration register specified by Address, performs a
bitwise AND followed by a bitwise OR between the read result and
the value specified by AndData, and writes the result to the 8-bit PCI
configuration register specified by Address. The value written to the PCI
configuration register is returned. This function must guarantee that all PCI
read and write operations are serialized. Extra left bits in both AndData and
OrData are stripped.
If Address > 0x0FFFFFFF, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
If StartBit is greater than 7, then ASSERT().
If EndBit is greater than 7, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
@param Address The PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..7.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..7.
@param AndData The value to AND with the PCI configuration register.
@param OrData The value to OR with the result of the AND operation.
@return The value written back to the PCI configuration register.
**/
UINT8
EFIAPI
PciCf8BitFieldAndThenOr8(
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT8 AndData,
IN UINT8 OrData
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT8 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 0);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoBitFieldAndThenOr8 (
PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),
StartBit,
EndBit,
AndData,
OrData
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Reads a 16-bit PCI configuration register.
Reads and returns the 16-bit PCI configuration register specified by Address.
This function must guarantee that all PCI read and write operations are
serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
@param Address The address that encodes the PCI Bus, Device, Function and
Register.
@return The read value from the PCI configuration register.
**/
UINT16
EFIAPI
PciCf8Read16 (
IN UINTN Address
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT16 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 1);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoRead16 (PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2));
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Writes a 16-bit PCI configuration register.
Writes the 16-bit PCI configuration register specified by Address with the
value specified by Value. Value is returned. This function must guarantee
that all PCI read and write operations are serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
@param Address The address that encodes the PCI Bus, Device, Function and
Register.
@param Value The value to write.
@return The value written to the PCI configuration register.
**/
UINT16
EFIAPI
PciCf8Write16 (
IN UINTN Address,
IN UINT16 Value
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT16 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 1);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoWrite16 (
PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),
Value
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Performs a bitwise OR of a 16-bit PCI configuration register with
a 16-bit value.
Reads the 16-bit PCI configuration register specified by Address, performs a
bitwise OR between the read result and the value specified by
OrData, and writes the result to the 16-bit PCI configuration register
specified by Address. The value written to the PCI configuration register is
returned. This function must guarantee that all PCI read and write operations
are serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
@param Address The address that encodes the PCI Bus, Device, Function and
Register.
@param OrData The value to OR with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT16
EFIAPI
PciCf8Or16 (
IN UINTN Address,
IN UINT16 OrData
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT16 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 1);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoOr16 (
PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),
OrData
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
value.
Reads the 16-bit PCI configuration register specified by Address, performs a
bitwise AND between the read result and the value specified by AndData, and
writes the result to the 16-bit PCI configuration register specified by
Address. The value written to the PCI configuration register is returned.
This function must guarantee that all PCI read and write operations are
serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
@param Address The address that encodes the PCI Bus, Device, Function and
Register.
@param AndData The value to AND with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT16
EFIAPI
PciCf8And16 (
IN UINTN Address,
IN UINT16 AndData
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT16 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 1);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoAnd16 (
PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),
AndData
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
value, followed a bitwise OR with another 16-bit value.
Reads the 16-bit PCI configuration register specified by Address, performs a
bitwise AND between the read result and the value specified by AndData,
performs a bitwise OR between the result of the AND operation and
the value specified by OrData, and writes the result to the 16-bit PCI
configuration register specified by Address. The value written to the PCI
configuration register is returned. This function must guarantee that all PCI
read and write operations are serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
@param Address The address that encodes the PCI Bus, Device, Function and
Register.
@param AndData The value to AND with the PCI configuration register.
@param OrData The value to OR with the result of the AND operation.
@return The value written back to the PCI configuration register.
**/
UINT16
EFIAPI
PciCf8AndThenOr16 (
IN UINTN Address,
IN UINT16 AndData,
IN UINT16 OrData
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT16 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 1);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoAndThenOr16 (
PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),
AndData,
OrData
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Reads a bit field of a PCI configuration register.
Reads the bit field in a 16-bit PCI configuration register. The bit field is
specified by the StartBit and the EndBit. The value of the bit field is
returned.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
If StartBit is greater than 15, then ASSERT().
If EndBit is greater than 15, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
@param Address The PCI configuration register to read.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..15.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..15.
@return The value of the bit field read from the PCI configuration register.
**/
UINT16
EFIAPI
PciCf8BitFieldRead16 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT16 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 1);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoBitFieldRead16 (
PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),
StartBit,
EndBit
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Writes a bit field to a PCI configuration register.
Writes Value to the bit field of the PCI configuration register. The bit
field is specified by the StartBit and the EndBit. All other bits in the
destination PCI configuration register are preserved. The new value of the
16-bit register is returned.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
If StartBit is greater than 15, then ASSERT().
If EndBit is greater than 15, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
@param Address The PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..15.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..15.
@param Value The new value of the bit field.
@return The value written back to the PCI configuration register.
**/
UINT16
EFIAPI
PciCf8BitFieldWrite16 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT16 Value
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT16 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 1);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoBitFieldWrite16 (
PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),
StartBit,
EndBit,
Value
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, and
writes the result back to the bit field in the 16-bit port.
Reads the 16-bit PCI configuration register specified by Address, performs a
bitwise OR between the read result and the value specified by
OrData, and writes the result to the 16-bit PCI configuration register
specified by Address. The value written to the PCI configuration register is
returned. This function must guarantee that all PCI read and write operations
are serialized. Extra left bits in OrData are stripped.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
If StartBit is greater than 15, then ASSERT().
If EndBit is greater than 15, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
@param Address The PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..15.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..15.
@param OrData The value to OR with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT16
EFIAPI
PciCf8BitFieldOr16 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT16 OrData
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT16 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 1);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoBitFieldOr16 (
PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),
StartBit,
EndBit,
OrData
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Reads a bit field in a 16-bit PCI configuration register, performs a bitwise
AND, and writes the result back to the bit field in the 16-bit register.
Reads the 16-bit PCI configuration register specified by Address, performs a
bitwise AND between the read result and the value specified by AndData, and
writes the result to the 16-bit PCI configuration register specified by
Address. The value written to the PCI configuration register is returned.
This function must guarantee that all PCI read and write operations are
serialized. Extra left bits in AndData are stripped.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
If StartBit is greater than 15, then ASSERT().
If EndBit is greater than 15, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
@param Address The PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..15.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..15.
@param AndData The value to AND with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT16
EFIAPI
PciCf8BitFieldAnd16 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT16 AndData
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT16 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 1);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoBitFieldAnd16 (
PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),
StartBit,
EndBit,
AndData
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Reads a bit field in a 16-bit port, performs a bitwise AND followed by a
bitwise OR, and writes the result back to the bit field in the
16-bit port.
Reads the 16-bit PCI configuration register specified by Address, performs a
bitwise AND followed by a bitwise OR between the read result and
the value specified by AndData, and writes the result to the 16-bit PCI
configuration register specified by Address. The value written to the PCI
configuration register is returned. This function must guarantee that all PCI
read and write operations are serialized. Extra left bits in both AndData and
OrData are stripped.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 16-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
If StartBit is greater than 15, then ASSERT().
If EndBit is greater than 15, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
@param Address The PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..15.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..15.
@param AndData The value to AND with the PCI configuration register.
@param OrData The value to OR with the result of the AND operation.
@return The value written back to the PCI configuration register.
**/
UINT16
EFIAPI
PciCf8BitFieldAndThenOr16(
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT16 AndData,
IN UINT16 OrData
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT16 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 1);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoBitFieldAndThenOr16 (
PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),
StartBit,
EndBit,
AndData,
OrData
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Reads a 32-bit PCI configuration register.
Reads and returns the 32-bit PCI configuration register specified by Address.
This function must guarantee that all PCI read and write operations are
serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
@param Address The address that encodes the PCI Bus, Device, Function and
Register.
@return The read value from the PCI configuration register.
**/
UINT32
EFIAPI
PciCf8Read32 (
IN UINTN Address
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT32 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 3);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoRead32 (PCI_CONFIGURATION_DATA_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Writes a 32-bit PCI configuration register.
Writes the 32-bit PCI configuration register specified by Address with the
value specified by Value. Value is returned. This function must guarantee
that all PCI read and write operations are serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
@param Address The address that encodes the PCI Bus, Device, Function and
Register.
@param Value The value to write.
@return The value written to the PCI configuration register.
**/
UINT32
EFIAPI
PciCf8Write32 (
IN UINTN Address,
IN UINT32 Value
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT32 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 3);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoWrite32 (
PCI_CONFIGURATION_DATA_PORT,
Value
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Performs a bitwise OR of a 32-bit PCI configuration register with
a 32-bit value.
Reads the 32-bit PCI configuration register specified by Address, performs a
bitwise OR between the read result and the value specified by
OrData, and writes the result to the 32-bit PCI configuration register
specified by Address. The value written to the PCI configuration register is
returned. This function must guarantee that all PCI read and write operations
are serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
@param Address The address that encodes the PCI Bus, Device, Function and
Register.
@param OrData The value to OR with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT32
EFIAPI
PciCf8Or32 (
IN UINTN Address,
IN UINT32 OrData
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT32 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 3);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoOr32 (
PCI_CONFIGURATION_DATA_PORT,
OrData
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit
value.
Reads the 32-bit PCI configuration register specified by Address, performs a
bitwise AND between the read result and the value specified by AndData, and
writes the result to the 32-bit PCI configuration register specified by
Address. The value written to the PCI configuration register is returned.
This function must guarantee that all PCI read and write operations are
serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
@param Address The address that encodes the PCI Bus, Device, Function and
Register.
@param AndData The value to AND with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT32
EFIAPI
PciCf8And32 (
IN UINTN Address,
IN UINT32 AndData
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT32 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 3);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoAnd32 (
PCI_CONFIGURATION_DATA_PORT,
AndData
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit
value, followed a bitwise OR with another 32-bit value.
Reads the 32-bit PCI configuration register specified by Address, performs a
bitwise AND between the read result and the value specified by AndData,
performs a bitwise OR between the result of the AND operation and
the value specified by OrData, and writes the result to the 32-bit PCI
configuration register specified by Address. The value written to the PCI
configuration register is returned. This function must guarantee that all PCI
read and write operations are serialized.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
@param Address The address that encodes the PCI Bus, Device, Function and
Register.
@param AndData The value to AND with the PCI configuration register.
@param OrData The value to OR with the result of the AND operation.
@return The value written back to the PCI configuration register.
**/
UINT32
EFIAPI
PciCf8AndThenOr32 (
IN UINTN Address,
IN UINT32 AndData,
IN UINT32 OrData
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT32 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 3);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoAndThenOr32 (
PCI_CONFIGURATION_DATA_PORT,
AndData,
OrData
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Reads a bit field of a PCI configuration register.
Reads the bit field in a 32-bit PCI configuration register. The bit field is
specified by the StartBit and the EndBit. The value of the bit field is
returned.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
If StartBit is greater than 31, then ASSERT().
If EndBit is greater than 31, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
@param Address The PCI configuration register to read.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..31.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..31.
@return The value of the bit field read from the PCI configuration register.
**/
UINT32
EFIAPI
PciCf8BitFieldRead32 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT32 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 3);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoBitFieldRead32 (
PCI_CONFIGURATION_DATA_PORT,
StartBit,
EndBit
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Writes a bit field to a PCI configuration register.
Writes Value to the bit field of the PCI configuration register. The bit
field is specified by the StartBit and the EndBit. All other bits in the
destination PCI configuration register are preserved. The new value of the
32-bit register is returned.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
If StartBit is greater than 31, then ASSERT().
If EndBit is greater than 31, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
@param Address The PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..31.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..31.
@param Value The new value of the bit field.
@return The value written back to the PCI configuration register.
**/
UINT32
EFIAPI
PciCf8BitFieldWrite32 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT32 Value
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT32 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 3);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoBitFieldWrite32 (
PCI_CONFIGURATION_DATA_PORT,
StartBit,
EndBit,
Value
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and
writes the result back to the bit field in the 32-bit port.
Reads the 32-bit PCI configuration register specified by Address, performs a
bitwise OR between the read result and the value specified by
OrData, and writes the result to the 32-bit PCI configuration register
specified by Address. The value written to the PCI configuration register is
returned. This function must guarantee that all PCI read and write operations
are serialized. Extra left bits in OrData are stripped.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
If StartBit is greater than 31, then ASSERT().
If EndBit is greater than 31, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
@param Address The PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..31.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..31.
@param OrData The value to OR with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT32
EFIAPI
PciCf8BitFieldOr32 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT32 OrData
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT32 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 3);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoBitFieldOr32 (
PCI_CONFIGURATION_DATA_PORT,
StartBit,
EndBit,
OrData
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Reads a bit field in a 32-bit PCI configuration register, performs a bitwise
AND, and writes the result back to the bit field in the 32-bit register.
Reads the 32-bit PCI configuration register specified by Address, performs a
bitwise AND between the read result and the value specified by AndData, and
writes the result to the 32-bit PCI configuration register specified by
Address. The value written to the PCI configuration register is returned.
This function must guarantee that all PCI read and write operations are
serialized. Extra left bits in AndData are stripped.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
If StartBit is greater than 31, then ASSERT().
If EndBit is greater than 31, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
@param Address The PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..31.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..31.
@param AndData The value to AND with the PCI configuration register.
@return The value written back to the PCI configuration register.
**/
UINT32
EFIAPI
PciCf8BitFieldAnd32 (
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT32 AndData
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT32 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 3);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoBitFieldAnd32 (
PCI_CONFIGURATION_DATA_PORT,
StartBit,
EndBit,
AndData
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Reads a bit field in a 32-bit port, performs a bitwise AND followed by a
bitwise OR, and writes the result back to the bit field in the
32-bit port.
Reads the 32-bit PCI configuration register specified by Address, performs a
bitwise AND followed by a bitwise OR between the read result and
the value specified by AndData, and writes the result to the 32-bit PCI
configuration register specified by Address. The value written to the PCI
configuration register is returned. This function must guarantee that all PCI
read and write operations are serialized. Extra left bits in both AndData and
OrData are stripped.
If Address > 0x0FFFFFFF, then ASSERT().
If Address is not aligned on a 32-bit boundary, then ASSERT().
If the register specified by Address >= 0x100, then ASSERT().
If StartBit is greater than 31, then ASSERT().
If EndBit is greater than 31, then ASSERT().
If EndBit is less than StartBit, then ASSERT().
If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
@param Address The PCI configuration register to write.
@param StartBit The ordinal of the least significant bit in the bit field.
Range 0..31.
@param EndBit The ordinal of the most significant bit in the bit field.
Range 0..31.
@param AndData The value to AND with the PCI configuration register.
@param OrData The value to OR with the result of the AND operation.
@return The value written back to the PCI configuration register.
**/
UINT32
EFIAPI
PciCf8BitFieldAndThenOr32(
IN UINTN Address,
IN UINTN StartBit,
IN UINTN EndBit,
IN UINT32 AndData,
IN UINT32 OrData
)
{
BOOLEAN InterruptState;
UINT32 AddressPort;
UINT32 Result;
ASSERT_INVALID_PCI_ADDRESS (Address, 3);
InterruptState = SaveAndDisableInterrupts ();
AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
Result = IoBitFieldAndThenOr32 (
PCI_CONFIGURATION_DATA_PORT,
StartBit,
EndBit,
AndData,
OrData
);
IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
SetInterruptState (InterruptState);
return Result;
}
/**
Reads a range of PCI configuration registers into a caller supplied buffer.
Reads the range of PCI configuration registers specified by StartAddress and
Size into the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be read. Size is
returned. When possible 32-bit PCI configuration read cycles are used to read
from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
and 16-bit PCI configuration read cycles may be used at the beginning and the
end of the range.
If StartAddress > 0x0FFFFFFF, then ASSERT().
If the register specified by StartAddress >= 0x100, then ASSERT().
If ((StartAddress & 0xFFF) + Size) > 0x100, then ASSERT().
If Size > 0 and Buffer is NULL, then ASSERT().
@param StartAddress The starting address that encodes the PCI Bus, Device,
Function and Register.
@param Size The size in bytes of the transfer.
@param Buffer The pointer to a buffer receiving the data read.
@return Size read from StartAddress.
**/
UINTN
EFIAPI
PciCf8ReadBuffer (
IN UINTN StartAddress,
IN UINTN Size,
OUT VOID *Buffer
)
{
UINTN ReturnValue;
ASSERT_INVALID_PCI_ADDRESS (StartAddress, 0);
ASSERT (((StartAddress & 0xFFF) + Size) <= 0x100);
if (Size == 0) {
return Size;
}
ASSERT (Buffer != NULL);
//
// Save Size for return
//
ReturnValue = Size;
if ((StartAddress & 1) != 0) {
//
// Read a byte if StartAddress is byte aligned
//
*(volatile UINT8 *)Buffer = PciCf8Read8 (StartAddress);
StartAddress += sizeof (UINT8);
Size -= sizeof (UINT8);
Buffer = (UINT8*)Buffer + 1;
}
if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) {
//
// Read a word if StartAddress is word aligned
//
WriteUnaligned16 ((UINT16 *)Buffer, (UINT16) PciCf8Read16 (StartAddress));
StartAddress += sizeof (UINT16);
Size -= sizeof (UINT16);
Buffer = (UINT16*)Buffer + 1;
}
while (Size >= sizeof (UINT32)) {
//
// Read as many double words as possible
//
WriteUnaligned32 ((UINT32 *)Buffer, (UINT32) PciCf8Read32 (StartAddress));
StartAddress += sizeof (UINT32);
Size -= sizeof (UINT32);
Buffer = (UINT32*)Buffer + 1;
}
if (Size >= sizeof (UINT16)) {
//
// Read the last remaining word if exist
//
WriteUnaligned16 ((UINT16 *)Buffer, (UINT16) PciCf8Read16 (StartAddress));
StartAddress += sizeof (UINT16);
Size -= sizeof (UINT16);
Buffer = (UINT16*)Buffer + 1;
}
if (Size >= sizeof (UINT8)) {
//
// Read the last remaining byte if exist
//
*(volatile UINT8 *)Buffer = PciCf8Read8 (StartAddress);
}
return ReturnValue;
}
/**
Copies the data in a caller supplied buffer to a specified range of PCI
configuration space.
Writes the range of PCI configuration registers specified by StartAddress and
Size from the buffer specified by Buffer. This function only allows the PCI
configuration registers from a single PCI function to be written. Size is
returned. When possible 32-bit PCI configuration write cycles are used to
write from StartAdress to StartAddress + Size. Due to alignment restrictions,
8-bit and 16-bit PCI configuration write cycles may be used at the beginning
and the end of the range.
If StartAddress > 0x0FFFFFFF, then ASSERT().
If the register specified by StartAddress >= 0x100, then ASSERT().
If ((StartAddress & 0xFFF) + Size) > 0x100, then ASSERT().
If Size > 0 and Buffer is NULL, then ASSERT().
@param StartAddress The starting address that encodes the PCI Bus, Device,
Function and Register.
@param Size The size in bytes of the transfer.
@param Buffer The pointer to a buffer containing the data to write.
@return Size written to StartAddress.
**/
UINTN
EFIAPI
PciCf8WriteBuffer (
IN UINTN StartAddress,
IN UINTN Size,
IN VOID *Buffer
)
{
UINTN ReturnValue;
ASSERT_INVALID_PCI_ADDRESS (StartAddress, 0);
ASSERT (((StartAddress & 0xFFF) + Size) <= 0x100);
if (Size == 0) {
return 0;
}
ASSERT (Buffer != NULL);
//
// Save Size for return
//
ReturnValue = Size;
if ((StartAddress & 1) != 0) {
//
// Write a byte if StartAddress is byte aligned
//
PciCf8Write8 (StartAddress, *(UINT8*)Buffer);
StartAddress += sizeof (UINT8);
Size -= sizeof (UINT8);
Buffer = (UINT8*)Buffer + 1;
}
if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) {
//
// Write a word if StartAddress is word aligned
//
PciCf8Write16 (StartAddress, ReadUnaligned16 ((UINT16*)Buffer));
StartAddress += sizeof (UINT16);
Size -= sizeof (UINT16);
Buffer = (UINT16*)Buffer + 1;
}
while (Size >= sizeof (UINT32)) {
//
// Write as many double words as possible
//
PciCf8Write32 (StartAddress, ReadUnaligned32 ((UINT32*)Buffer));
StartAddress += sizeof (UINT32);
Size -= sizeof (UINT32);
Buffer = (UINT32*)Buffer + 1;
}
if (Size >= sizeof (UINT16)) {
//
// Write the last remaining word if exist
//
PciCf8Write16 (StartAddress, ReadUnaligned16 ((UINT16*)Buffer));
StartAddress += sizeof (UINT16);
Size -= sizeof (UINT16);
Buffer = (UINT16*)Buffer + 1;
}
if (Size >= sizeof (UINT8)) {
//
// Write the last remaining byte if exist
//
PciCf8Write8 (StartAddress, *(UINT8*)Buffer);
}
return ReturnValue;
}