/** @file
  PCI CF8 Library functions that use I/O ports 0xCF8 and 0xCFC to perform PCI Configuration cycles.
  Layers on top of an I/O Library instance.

  Copyright (c) 2006 - 2012, Intel Corporation. All rights reserved.<BR>
  This program and the accompanying materials
  are licensed and made available under the terms and conditions of the BSD License
  which accompanies this distribution.  The full text of the license may be found at
  http://opensource.org/licenses/bsd-license.php.

  THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

**/


#include <Base.h>

#include <Library/BaseLib.h>
#include <Library/PciCf8Lib.h>
#include <Library/IoLib.h>
#include <Library/DebugLib.h>

//
// Declare I/O Ports used to perform PCI Confguration Cycles
//
#define PCI_CONFIGURATION_ADDRESS_PORT  0xCF8
#define PCI_CONFIGURATION_DATA_PORT     0xCFC

/**
  Convert a PCI Library address to PCI CF8 formatted address.

  Declare macro to convert PCI Library address to PCI CF8 formatted address.
  Bit fields of PCI Library and CF8 formatted address is as follows:
  PCI Library formatted address    CF8 Formatted Address
 =============================    ======================
    Bits 00..11  Register           Bits 00..07  Register
    Bits 12..14  Function           Bits 08..10  Function
    Bits 15..19  Device             Bits 11..15  Device
    Bits 20..27  Bus                Bits 16..23  Bus
    Bits 28..31  Reserved(MBZ)      Bits 24..30  Reserved(MBZ)
                                    Bits 31..31  Must be 1

  @param  A The address to convert.

  @retval The coverted address.

**/
#define PCI_TO_CF8_ADDRESS(A) \
  ((UINT32) ((((A) >> 4) & 0x00ffff00) | ((A) & 0xfc) | 0x80000000))

/**
  Assert the validity of a PCI CF8 address. A valid PCI CF8 address should contain 1's
  only in the low 28 bits, excluding bits 08..11.

  @param  A The address to validate.
  @param  M Additional bits to assert to be zero.

**/
#define ASSERT_INVALID_PCI_ADDRESS(A,M) \
  ASSERT (((A) & (~0xffff0ff | (M))) == 0)

/**
  Registers a PCI device so PCI configuration registers may be accessed after 
  SetVirtualAddressMap().
  
  Registers the PCI device specified by Address so all the PCI configuration registers 
  associated with that PCI device may be accessed after SetVirtualAddressMap() is called.
  
  If Address > 0x0FFFFFFF, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().

  @param  Address The address that encodes the PCI Bus, Device, Function and
                  Register.
  
  @retval RETURN_SUCCESS           The PCI device was registered for runtime access.
  @retval RETURN_UNSUPPORTED       An attempt was made to call this function 
                                   after ExitBootServices().
  @retval RETURN_UNSUPPORTED       The resources required to access the PCI device
                                   at runtime could not be mapped.
  @retval RETURN_OUT_OF_RESOURCES  There are not enough resources available to
                                   complete the registration.

**/
RETURN_STATUS
EFIAPI
PciCf8RegisterForRuntimeAccess (
  IN UINTN  Address
  )
{
  ASSERT_INVALID_PCI_ADDRESS (Address, 0);
  return RETURN_SUCCESS;
}

/**
  Reads an 8-bit PCI configuration register.

  Reads and returns the 8-bit PCI configuration register specified by Address.
  This function must guarantee that all PCI read and write operations are
  serialized.

  If Address > 0x0FFFFFFF, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().

  @param  Address The address that encodes the PCI Bus, Device, Function and
                  Register.

  @return The read value from the PCI configuration register.

**/
UINT8
EFIAPI
PciCf8Read8 (
  IN      UINTN                     Address
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT8    Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 0);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoRead8 (PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3));
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Writes an 8-bit PCI configuration register.

  Writes the 8-bit PCI configuration register specified by Address with the
  value specified by Value. Value is returned. This function must guarantee
  that all PCI read and write operations are serialized.

  If Address > 0x0FFFFFFF, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().

  @param  Address The address that encodes the PCI Bus, Device, Function and
                  Register.
  @param  Value   The value to write.

  @return The value written to the PCI configuration register.

**/
UINT8
EFIAPI
PciCf8Write8 (
  IN      UINTN                     Address,
  IN      UINT8                     Value
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT8    Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 0);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoWrite8 (
             PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),
             Value
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Performs a bitwise OR of an 8-bit PCI configuration register with
  an 8-bit value.

  Reads the 8-bit PCI configuration register specified by Address, performs a
  bitwise OR between the read result and the value specified by
  OrData, and writes the result to the 8-bit PCI configuration register
  specified by Address. The value written to the PCI configuration register is
  returned. This function must guarantee that all PCI read and write operations
  are serialized.

  If Address > 0x0FFFFFFF, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().

  @param  Address The address that encodes the PCI Bus, Device, Function and
                  Register.
  @param  OrData  The value to OR with the PCI configuration register.

  @return The value written back to the PCI configuration register.

**/
UINT8
EFIAPI
PciCf8Or8 (
  IN      UINTN                     Address,
  IN      UINT8                     OrData
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT8    Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 0);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoOr8 (
             PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),
             OrData
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit
  value.

  Reads the 8-bit PCI configuration register specified by Address, performs a
  bitwise AND between the read result and the value specified by AndData, and
  writes the result to the 8-bit PCI configuration register specified by
  Address. The value written to the PCI configuration register is returned.
  This function must guarantee that all PCI read and write operations are
  serialized.

  If Address > 0x0FFFFFFF, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().

  @param  Address The address that encodes the PCI Bus, Device, Function and
                  Register.
  @param  AndData The value to AND with the PCI configuration register.

  @return The value written back to the PCI configuration register.

**/
UINT8
EFIAPI
PciCf8And8 (
  IN      UINTN                     Address,
  IN      UINT8                     AndData
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT8    Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 0);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoAnd8 (
             PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),
             AndData
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit
  value, followed a  bitwise OR with another 8-bit value.

  Reads the 8-bit PCI configuration register specified by Address, performs a
  bitwise AND between the read result and the value specified by AndData,
  performs a bitwise OR between the result of the AND operation and
  the value specified by OrData, and writes the result to the 8-bit PCI
  configuration register specified by Address. The value written to the PCI
  configuration register is returned. This function must guarantee that all PCI
  read and write operations are serialized.

  If Address > 0x0FFFFFFF, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().

  @param  Address The address that encodes the PCI Bus, Device, Function and
                  Register.
  @param  AndData The value to AND with the PCI configuration register.
  @param  OrData  The value to OR with the result of the AND operation.

  @return The value written back to the PCI configuration register.

**/
UINT8
EFIAPI
PciCf8AndThenOr8 (
  IN      UINTN                     Address,
  IN      UINT8                     AndData,
  IN      UINT8                     OrData
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT8    Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 0);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoAndThenOr8 (
             PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),
             AndData,
             OrData
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Reads a bit field of a PCI configuration register.

  Reads the bit field in an 8-bit PCI configuration register. The bit field is
  specified by the StartBit and the EndBit. The value of the bit field is
  returned.

  If Address > 0x0FFFFFFF, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().
  If StartBit is greater than 7, then ASSERT().
  If EndBit is greater than 7, then ASSERT().
  If EndBit is less than StartBit, then ASSERT().

  @param  Address   The PCI configuration register to read.
  @param  StartBit  The ordinal of the least significant bit in the bit field.
                    Range 0..7.
  @param  EndBit    The ordinal of the most significant bit in the bit field.
                    Range 0..7.

  @return The value of the bit field read from the PCI configuration register.

**/
UINT8
EFIAPI
PciCf8BitFieldRead8 (
  IN      UINTN                     Address,
  IN      UINTN                     StartBit,
  IN      UINTN                     EndBit
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT8    Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 0);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoBitFieldRead8 (
             PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),
             StartBit,
             EndBit
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Writes a bit field to a PCI configuration register.

  Writes Value to the bit field of the PCI configuration register. The bit
  field is specified by the StartBit and the EndBit. All other bits in the
  destination PCI configuration register are preserved. The new value of the
  8-bit register is returned.

  If Address > 0x0FFFFFFF, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().
  If StartBit is greater than 7, then ASSERT().
  If EndBit is greater than 7, then ASSERT().
  If EndBit is less than StartBit, then ASSERT().
  If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

  @param  Address   The PCI configuration register to write.
  @param  StartBit  The ordinal of the least significant bit in the bit field.
                    Range 0..7.
  @param  EndBit    The ordinal of the most significant bit in the bit field.
                    Range 0..7.
  @param  Value     The new value of the bit field.

  @return The value written back to the PCI configuration register.

**/
UINT8
EFIAPI
PciCf8BitFieldWrite8 (
  IN      UINTN                     Address,
  IN      UINTN                     StartBit,
  IN      UINTN                     EndBit,
  IN      UINT8                     Value
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT8    Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 0);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoBitFieldWrite8 (
             PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),
             StartBit,
             EndBit,
             Value
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and
  writes the result back to the bit field in the 8-bit port.

  Reads the 8-bit PCI configuration register specified by Address, performs a
  bitwise OR between the read result and the value specified by
  OrData, and writes the result to the 8-bit PCI configuration register
  specified by Address. The value written to the PCI configuration register is
  returned. This function must guarantee that all PCI read and write operations
  are serialized. Extra left bits in OrData are stripped.

  If Address > 0x0FFFFFFF, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().
  If StartBit is greater than 7, then ASSERT().
  If EndBit is greater than 7, then ASSERT().
  If EndBit is less than StartBit, then ASSERT().
  If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

  @param  Address   The PCI configuration register to write.
  @param  StartBit  The ordinal of the least significant bit in the bit field.
                    Range 0..7.
  @param  EndBit    The ordinal of the most significant bit in the bit field.
                    Range 0..7.
  @param  OrData    The value to OR with the PCI configuration register.

  @return The value written back to the PCI configuration register.

**/
UINT8
EFIAPI
PciCf8BitFieldOr8 (
  IN      UINTN                     Address,
  IN      UINTN                     StartBit,
  IN      UINTN                     EndBit,
  IN      UINT8                     OrData
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT8    Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 0);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoBitFieldOr8 (
             PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),
             StartBit,
             EndBit,
             OrData
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Reads a bit field in an 8-bit PCI configuration register, performs a bitwise
  AND, and writes the result back to the bit field in the 8-bit register.

  Reads the 8-bit PCI configuration register specified by Address, performs a
  bitwise AND between the read result and the value specified by AndData, and
  writes the result to the 8-bit PCI configuration register specified by
  Address. The value written to the PCI configuration register is returned.
  This function must guarantee that all PCI read and write operations are
  serialized. Extra left bits in AndData are stripped.

  If Address > 0x0FFFFFFF, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().
  If StartBit is greater than 7, then ASSERT().
  If EndBit is greater than 7, then ASSERT().
  If EndBit is less than StartBit, then ASSERT().
  If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

  @param  Address   The PCI configuration register to write.
  @param  StartBit  The ordinal of the least significant bit in the bit field.
                    Range 0..7.
  @param  EndBit    The ordinal of the most significant bit in the bit field.
                    Range 0..7.
  @param  AndData   The value to AND with the PCI configuration register.

  @return The value written back to the PCI configuration register.

**/
UINT8
EFIAPI
PciCf8BitFieldAnd8 (
  IN      UINTN                     Address,
  IN      UINTN                     StartBit,
  IN      UINTN                     EndBit,
  IN      UINT8                     AndData
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT8    Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 0);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoBitFieldAnd8 (
             PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),
             StartBit,
             EndBit,
             AndData
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Reads a bit field in an 8-bit port, performs a bitwise AND followed by a
  bitwise OR, and writes the result back to the bit field in the
  8-bit port.

  Reads the 8-bit PCI configuration register specified by Address, performs a
  bitwise AND followed by a bitwise OR between the read result and
  the value specified by AndData, and writes the result to the 8-bit PCI
  configuration register specified by Address. The value written to the PCI
  configuration register is returned. This function must guarantee that all PCI
  read and write operations are serialized. Extra left bits in both AndData and
  OrData are stripped.

  If Address > 0x0FFFFFFF, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().
  If StartBit is greater than 7, then ASSERT().
  If EndBit is greater than 7, then ASSERT().
  If EndBit is less than StartBit, then ASSERT().
  If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
  If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

  @param  Address   The PCI configuration register to write.
  @param  StartBit  The ordinal of the least significant bit in the bit field.
                    Range 0..7.
  @param  EndBit    The ordinal of the most significant bit in the bit field.
                    Range 0..7.
  @param  AndData   The value to AND with the PCI configuration register.
  @param  OrData    The value to OR with the result of the AND operation.

  @return The value written back to the PCI configuration register.

**/
UINT8
EFIAPI
PciCf8BitFieldAndThenOr8(
  IN      UINTN                     Address,
  IN      UINTN                     StartBit,
  IN      UINTN                     EndBit,
  IN      UINT8                     AndData,
  IN      UINT8                     OrData
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT8    Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 0);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoBitFieldAndThenOr8 (
             PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3),
             StartBit,
             EndBit,
             AndData,
             OrData
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Reads a 16-bit PCI configuration register.

  Reads and returns the 16-bit PCI configuration register specified by Address.
  This function must guarantee that all PCI read and write operations are
  serialized.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 16-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().

  @param  Address The address that encodes the PCI Bus, Device, Function and
                  Register.

  @return The read value from the PCI configuration register.

**/
UINT16
EFIAPI
PciCf8Read16 (
  IN      UINTN                     Address
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT16   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 1);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoRead16 (PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2));
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Writes a 16-bit PCI configuration register.

  Writes the 16-bit PCI configuration register specified by Address with the
  value specified by Value. Value is returned. This function must guarantee
  that all PCI read and write operations are serialized.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 16-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().

  @param  Address The address that encodes the PCI Bus, Device, Function and
                  Register.
  @param  Value   The value to write.

  @return The value written to the PCI configuration register.

**/
UINT16
EFIAPI
PciCf8Write16 (
  IN      UINTN                     Address,
  IN      UINT16                    Value
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT16   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 1);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoWrite16 (
             PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),
             Value
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Performs a bitwise OR of a 16-bit PCI configuration register with
  a 16-bit value.

  Reads the 16-bit PCI configuration register specified by Address, performs a
  bitwise OR between the read result and the value specified by
  OrData, and writes the result to the 16-bit PCI configuration register
  specified by Address. The value written to the PCI configuration register is
  returned. This function must guarantee that all PCI read and write operations
  are serialized.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 16-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().

  @param  Address The address that encodes the PCI Bus, Device, Function and
                  Register.
  @param  OrData  The value to OR with the PCI configuration register.

  @return The value written back to the PCI configuration register.

**/
UINT16
EFIAPI
PciCf8Or16 (
  IN      UINTN                     Address,
  IN      UINT16                    OrData
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT16   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 1);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoOr16 (
             PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),
             OrData
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
  value.

  Reads the 16-bit PCI configuration register specified by Address, performs a
  bitwise AND between the read result and the value specified by AndData, and
  writes the result to the 16-bit PCI configuration register specified by
  Address. The value written to the PCI configuration register is returned.
  This function must guarantee that all PCI read and write operations are
  serialized.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 16-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().

  @param  Address The address that encodes the PCI Bus, Device, Function and
                  Register.
  @param  AndData The value to AND with the PCI configuration register.

  @return The value written back to the PCI configuration register.

**/
UINT16
EFIAPI
PciCf8And16 (
  IN      UINTN                     Address,
  IN      UINT16                    AndData
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT16   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 1);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoAnd16 (
             PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),
             AndData
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit
  value, followed a  bitwise OR with another 16-bit value.

  Reads the 16-bit PCI configuration register specified by Address, performs a
  bitwise AND between the read result and the value specified by AndData,
  performs a bitwise OR between the result of the AND operation and
  the value specified by OrData, and writes the result to the 16-bit PCI
  configuration register specified by Address. The value written to the PCI
  configuration register is returned. This function must guarantee that all PCI
  read and write operations are serialized.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 16-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().

  @param  Address The address that encodes the PCI Bus, Device, Function and
                  Register.
  @param  AndData The value to AND with the PCI configuration register.
  @param  OrData  The value to OR with the result of the AND operation.

  @return The value written back to the PCI configuration register.

**/
UINT16
EFIAPI
PciCf8AndThenOr16 (
  IN      UINTN                     Address,
  IN      UINT16                    AndData,
  IN      UINT16                    OrData
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT16   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 1);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoAndThenOr16 (
             PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),
             AndData,
             OrData
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Reads a bit field of a PCI configuration register.

  Reads the bit field in a 16-bit PCI configuration register. The bit field is
  specified by the StartBit and the EndBit. The value of the bit field is
  returned.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 16-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().
  If StartBit is greater than 15, then ASSERT().
  If EndBit is greater than 15, then ASSERT().
  If EndBit is less than StartBit, then ASSERT().

  @param  Address   The PCI configuration register to read.
  @param  StartBit  The ordinal of the least significant bit in the bit field.
                    Range 0..15.
  @param  EndBit    The ordinal of the most significant bit in the bit field.
                    Range 0..15.

  @return The value of the bit field read from the PCI configuration register.

**/
UINT16
EFIAPI
PciCf8BitFieldRead16 (
  IN      UINTN                     Address,
  IN      UINTN                     StartBit,
  IN      UINTN                     EndBit
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT16   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 1);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoBitFieldRead16 (
             PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),
             StartBit,
             EndBit
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Writes a bit field to a PCI configuration register.

  Writes Value to the bit field of the PCI configuration register. The bit
  field is specified by the StartBit and the EndBit. All other bits in the
  destination PCI configuration register are preserved. The new value of the
  16-bit register is returned.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 16-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().
  If StartBit is greater than 15, then ASSERT().
  If EndBit is greater than 15, then ASSERT().
  If EndBit is less than StartBit, then ASSERT().
  If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

  @param  Address   The PCI configuration register to write.
  @param  StartBit  The ordinal of the least significant bit in the bit field.
                    Range 0..15.
  @param  EndBit    The ordinal of the most significant bit in the bit field.
                    Range 0..15.
  @param  Value     The new value of the bit field.

  @return The value written back to the PCI configuration register.

**/
UINT16
EFIAPI
PciCf8BitFieldWrite16 (
  IN      UINTN                     Address,
  IN      UINTN                     StartBit,
  IN      UINTN                     EndBit,
  IN      UINT16                    Value
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT16   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 1);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoBitFieldWrite16 (
             PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),
             StartBit,
             EndBit,
             Value
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, and
  writes the result back to the bit field in the 16-bit port.

  Reads the 16-bit PCI configuration register specified by Address, performs a
  bitwise OR between the read result and the value specified by
  OrData, and writes the result to the 16-bit PCI configuration register
  specified by Address. The value written to the PCI configuration register is
  returned. This function must guarantee that all PCI read and write operations
  are serialized. Extra left bits in OrData are stripped.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 16-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().
  If StartBit is greater than 15, then ASSERT().
  If EndBit is greater than 15, then ASSERT().
  If EndBit is less than StartBit, then ASSERT().
  If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

  @param  Address   The PCI configuration register to write.
  @param  StartBit  The ordinal of the least significant bit in the bit field.
                    Range 0..15.
  @param  EndBit    The ordinal of the most significant bit in the bit field.
                    Range 0..15.
  @param  OrData    The value to OR with the PCI configuration register.

  @return The value written back to the PCI configuration register.

**/
UINT16
EFIAPI
PciCf8BitFieldOr16 (
  IN      UINTN                     Address,
  IN      UINTN                     StartBit,
  IN      UINTN                     EndBit,
  IN      UINT16                    OrData
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT16   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 1);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoBitFieldOr16 (
             PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),
             StartBit,
             EndBit,
             OrData
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Reads a bit field in a 16-bit PCI configuration register, performs a bitwise
  AND, and writes the result back to the bit field in the 16-bit register.

  Reads the 16-bit PCI configuration register specified by Address, performs a
  bitwise AND between the read result and the value specified by AndData, and
  writes the result to the 16-bit PCI configuration register specified by
  Address. The value written to the PCI configuration register is returned.
  This function must guarantee that all PCI read and write operations are
  serialized. Extra left bits in AndData are stripped.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 16-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().
  If StartBit is greater than 15, then ASSERT().
  If EndBit is greater than 15, then ASSERT().
  If EndBit is less than StartBit, then ASSERT().
  If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

  @param  Address   The PCI configuration register to write.
  @param  StartBit  The ordinal of the least significant bit in the bit field.
                    Range 0..15.
  @param  EndBit    The ordinal of the most significant bit in the bit field.
                    Range 0..15.
  @param  AndData   The value to AND with the PCI configuration register.

  @return The value written back to the PCI configuration register.

**/
UINT16
EFIAPI
PciCf8BitFieldAnd16 (
  IN      UINTN                     Address,
  IN      UINTN                     StartBit,
  IN      UINTN                     EndBit,
  IN      UINT16                    AndData
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT16   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 1);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoBitFieldAnd16 (
             PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),
             StartBit,
             EndBit,
             AndData
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Reads a bit field in a 16-bit port, performs a bitwise AND followed by a
  bitwise OR, and writes the result back to the bit field in the
  16-bit port.

  Reads the 16-bit PCI configuration register specified by Address, performs a
  bitwise AND followed by a bitwise OR between the read result and
  the value specified by AndData, and writes the result to the 16-bit PCI
  configuration register specified by Address. The value written to the PCI
  configuration register is returned. This function must guarantee that all PCI
  read and write operations are serialized. Extra left bits in both AndData and
  OrData are stripped.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 16-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().
  If StartBit is greater than 15, then ASSERT().
  If EndBit is greater than 15, then ASSERT().
  If EndBit is less than StartBit, then ASSERT().
  If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
  If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

  @param  Address   The PCI configuration register to write.
  @param  StartBit  The ordinal of the least significant bit in the bit field.
                    Range 0..15.
  @param  EndBit    The ordinal of the most significant bit in the bit field.
                    Range 0..15.
  @param  AndData   The value to AND with the PCI configuration register.
  @param  OrData    The value to OR with the result of the AND operation.

  @return The value written back to the PCI configuration register.

**/
UINT16
EFIAPI
PciCf8BitFieldAndThenOr16(
  IN      UINTN                     Address,
  IN      UINTN                     StartBit,
  IN      UINTN                     EndBit,
  IN      UINT16                    AndData,
  IN      UINT16                    OrData
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT16   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 1);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoBitFieldAndThenOr16 (
             PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2),
             StartBit,
             EndBit,
             AndData,
             OrData
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Reads a 32-bit PCI configuration register.

  Reads and returns the 32-bit PCI configuration register specified by Address.
  This function must guarantee that all PCI read and write operations are
  serialized.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 32-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().

  @param  Address The address that encodes the PCI Bus, Device, Function and
                  Register.

  @return The read value from the PCI configuration register.

**/
UINT32
EFIAPI
PciCf8Read32 (
  IN      UINTN                     Address
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT32   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 3);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoRead32 (PCI_CONFIGURATION_DATA_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Writes a 32-bit PCI configuration register.

  Writes the 32-bit PCI configuration register specified by Address with the
  value specified by Value. Value is returned. This function must guarantee
  that all PCI read and write operations are serialized.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 32-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().

  @param  Address The address that encodes the PCI Bus, Device, Function and
                  Register.
  @param  Value   The value to write.

  @return The value written to the PCI configuration register.

**/
UINT32
EFIAPI
PciCf8Write32 (
  IN      UINTN                     Address,
  IN      UINT32                    Value
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT32   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 3);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoWrite32 (
             PCI_CONFIGURATION_DATA_PORT,
             Value
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Performs a bitwise OR of a 32-bit PCI configuration register with
  a 32-bit value.

  Reads the 32-bit PCI configuration register specified by Address, performs a
  bitwise OR between the read result and the value specified by
  OrData, and writes the result to the 32-bit PCI configuration register
  specified by Address. The value written to the PCI configuration register is
  returned. This function must guarantee that all PCI read and write operations
  are serialized.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 32-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().

  @param  Address The address that encodes the PCI Bus, Device, Function and
                  Register.
  @param  OrData  The value to OR with the PCI configuration register.

  @return The value written back to the PCI configuration register.

**/
UINT32
EFIAPI
PciCf8Or32 (
  IN      UINTN                     Address,
  IN      UINT32                    OrData
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT32   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 3);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoOr32 (
             PCI_CONFIGURATION_DATA_PORT,
             OrData
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit
  value.

  Reads the 32-bit PCI configuration register specified by Address, performs a
  bitwise AND between the read result and the value specified by AndData, and
  writes the result to the 32-bit PCI configuration register specified by
  Address. The value written to the PCI configuration register is returned.
  This function must guarantee that all PCI read and write operations are
  serialized.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 32-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().

  @param  Address The address that encodes the PCI Bus, Device, Function and
                  Register.
  @param  AndData The value to AND with the PCI configuration register.

  @return The value written back to the PCI configuration register.

**/
UINT32
EFIAPI
PciCf8And32 (
  IN      UINTN                     Address,
  IN      UINT32                    AndData
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT32   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 3);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoAnd32 (
             PCI_CONFIGURATION_DATA_PORT,
             AndData
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit
  value, followed a  bitwise OR with another 32-bit value.

  Reads the 32-bit PCI configuration register specified by Address, performs a
  bitwise AND between the read result and the value specified by AndData,
  performs a bitwise OR between the result of the AND operation and
  the value specified by OrData, and writes the result to the 32-bit PCI
  configuration register specified by Address. The value written to the PCI
  configuration register is returned. This function must guarantee that all PCI
  read and write operations are serialized.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 32-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().

  @param  Address The address that encodes the PCI Bus, Device, Function and
                  Register.
  @param  AndData The value to AND with the PCI configuration register.
  @param  OrData  The value to OR with the result of the AND operation.

  @return The value written back to the PCI configuration register.

**/
UINT32
EFIAPI
PciCf8AndThenOr32 (
  IN      UINTN                     Address,
  IN      UINT32                    AndData,
  IN      UINT32                    OrData
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT32   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 3);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoAndThenOr32 (
             PCI_CONFIGURATION_DATA_PORT,
             AndData,
             OrData
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Reads a bit field of a PCI configuration register.

  Reads the bit field in a 32-bit PCI configuration register. The bit field is
  specified by the StartBit and the EndBit. The value of the bit field is
  returned.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 32-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().
  If StartBit is greater than 31, then ASSERT().
  If EndBit is greater than 31, then ASSERT().
  If EndBit is less than StartBit, then ASSERT().

  @param  Address   The PCI configuration register to read.
  @param  StartBit  The ordinal of the least significant bit in the bit field.
                    Range 0..31.
  @param  EndBit    The ordinal of the most significant bit in the bit field.
                    Range 0..31.

  @return The value of the bit field read from the PCI configuration register.

**/
UINT32
EFIAPI
PciCf8BitFieldRead32 (
  IN      UINTN                     Address,
  IN      UINTN                     StartBit,
  IN      UINTN                     EndBit
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT32   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 3);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoBitFieldRead32 (
             PCI_CONFIGURATION_DATA_PORT,
             StartBit,
             EndBit
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Writes a bit field to a PCI configuration register.

  Writes Value to the bit field of the PCI configuration register. The bit
  field is specified by the StartBit and the EndBit. All other bits in the
  destination PCI configuration register are preserved. The new value of the
  32-bit register is returned.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 32-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().
  If StartBit is greater than 31, then ASSERT().
  If EndBit is greater than 31, then ASSERT().
  If EndBit is less than StartBit, then ASSERT().
  If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

  @param  Address   The PCI configuration register to write.
  @param  StartBit  The ordinal of the least significant bit in the bit field.
                    Range 0..31.
  @param  EndBit    The ordinal of the most significant bit in the bit field.
                    Range 0..31.
  @param  Value     The new value of the bit field.

  @return The value written back to the PCI configuration register.

**/
UINT32
EFIAPI
PciCf8BitFieldWrite32 (
  IN      UINTN                     Address,
  IN      UINTN                     StartBit,
  IN      UINTN                     EndBit,
  IN      UINT32                    Value
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT32   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 3);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoBitFieldWrite32 (
             PCI_CONFIGURATION_DATA_PORT,
             StartBit,
             EndBit,
             Value
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and
  writes the result back to the bit field in the 32-bit port.

  Reads the 32-bit PCI configuration register specified by Address, performs a
  bitwise OR between the read result and the value specified by
  OrData, and writes the result to the 32-bit PCI configuration register
  specified by Address. The value written to the PCI configuration register is
  returned. This function must guarantee that all PCI read and write operations
  are serialized. Extra left bits in OrData are stripped.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 32-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().
  If StartBit is greater than 31, then ASSERT().
  If EndBit is greater than 31, then ASSERT().
  If EndBit is less than StartBit, then ASSERT().
  If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

  @param  Address   The PCI configuration register to write.
  @param  StartBit  The ordinal of the least significant bit in the bit field.
                    Range 0..31.
  @param  EndBit    The ordinal of the most significant bit in the bit field.
                    Range 0..31.
  @param  OrData    The value to OR with the PCI configuration register.

  @return The value written back to the PCI configuration register.

**/
UINT32
EFIAPI
PciCf8BitFieldOr32 (
  IN      UINTN                     Address,
  IN      UINTN                     StartBit,
  IN      UINTN                     EndBit,
  IN      UINT32                    OrData
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT32   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 3);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoBitFieldOr32 (
             PCI_CONFIGURATION_DATA_PORT,
             StartBit,
             EndBit,
             OrData
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Reads a bit field in a 32-bit PCI configuration register, performs a bitwise
  AND, and writes the result back to the bit field in the 32-bit register.

  Reads the 32-bit PCI configuration register specified by Address, performs a
  bitwise AND between the read result and the value specified by AndData, and
  writes the result to the 32-bit PCI configuration register specified by
  Address. The value written to the PCI configuration register is returned.
  This function must guarantee that all PCI read and write operations are
  serialized. Extra left bits in AndData are stripped.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 32-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().
  If StartBit is greater than 31, then ASSERT().
  If EndBit is greater than 31, then ASSERT().
  If EndBit is less than StartBit, then ASSERT().
  If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

  @param  Address   The PCI configuration register to write.
  @param  StartBit  The ordinal of the least significant bit in the bit field.
                    Range 0..31.
  @param  EndBit    The ordinal of the most significant bit in the bit field.
                    Range 0..31.
  @param  AndData   The value to AND with the PCI configuration register.

  @return The value written back to the PCI configuration register.

**/
UINT32
EFIAPI
PciCf8BitFieldAnd32 (
  IN      UINTN                     Address,
  IN      UINTN                     StartBit,
  IN      UINTN                     EndBit,
  IN      UINT32                    AndData
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT32   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 3);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoBitFieldAnd32 (
             PCI_CONFIGURATION_DATA_PORT,
             StartBit,
             EndBit,
             AndData
             );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Reads a bit field in a 32-bit port, performs a bitwise AND followed by a
  bitwise OR, and writes the result back to the bit field in the
  32-bit port.

  Reads the 32-bit PCI configuration register specified by Address, performs a
  bitwise AND followed by a bitwise OR between the read result and
  the value specified by AndData, and writes the result to the 32-bit PCI
  configuration register specified by Address. The value written to the PCI
  configuration register is returned. This function must guarantee that all PCI
  read and write operations are serialized. Extra left bits in both AndData and
  OrData are stripped.

  If Address > 0x0FFFFFFF, then ASSERT().
  If Address is not aligned on a 32-bit boundary, then ASSERT().
  If the register specified by Address >= 0x100, then ASSERT().
  If StartBit is greater than 31, then ASSERT().
  If EndBit is greater than 31, then ASSERT().
  If EndBit is less than StartBit, then ASSERT().
  If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().
  If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT().

  @param  Address   The PCI configuration register to write.
  @param  StartBit  The ordinal of the least significant bit in the bit field.
                    Range 0..31.
  @param  EndBit    The ordinal of the most significant bit in the bit field.
                    Range 0..31.
  @param  AndData   The value to AND with the PCI configuration register.
  @param  OrData    The value to OR with the result of the AND operation.

  @return The value written back to the PCI configuration register.

**/
UINT32
EFIAPI
PciCf8BitFieldAndThenOr32(
  IN      UINTN                     Address,
  IN      UINTN                     StartBit,
  IN      UINTN                     EndBit,
  IN      UINT32                    AndData,
  IN      UINT32                    OrData
  )
{
  BOOLEAN  InterruptState;
  UINT32   AddressPort;
  UINT32   Result;
  
  ASSERT_INVALID_PCI_ADDRESS (Address, 3);
  InterruptState = SaveAndDisableInterrupts ();
  AddressPort = IoRead32 (PCI_CONFIGURATION_ADDRESS_PORT);
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address));
  Result = IoBitFieldAndThenOr32 (
               PCI_CONFIGURATION_DATA_PORT,
               StartBit,
               EndBit,
               AndData,
               OrData
               );
  IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, AddressPort);
  SetInterruptState (InterruptState);
  return Result;
}

/**
  Reads a range of PCI configuration registers into a caller supplied buffer.

  Reads the range of PCI configuration registers specified by StartAddress and
  Size into the buffer specified by Buffer. This function only allows the PCI
  configuration registers from a single PCI function to be read. Size is
  returned. When possible 32-bit PCI configuration read cycles are used to read
  from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit
  and 16-bit PCI configuration read cycles may be used at the beginning and the
  end of the range.

  If StartAddress > 0x0FFFFFFF, then ASSERT().
  If the register specified by StartAddress >= 0x100, then ASSERT().
  If ((StartAddress & 0xFFF) + Size) > 0x100, then ASSERT().
  If Size > 0 and Buffer is NULL, then ASSERT().

  @param  StartAddress  The starting address that encodes the PCI Bus, Device,
                        Function and Register.
  @param  Size          The size in bytes of the transfer.
  @param  Buffer        The pointer to a buffer receiving the data read.

  @return Size read from StartAddress.

**/
UINTN
EFIAPI
PciCf8ReadBuffer (
  IN      UINTN                     StartAddress,
  IN      UINTN                     Size,
  OUT     VOID                      *Buffer
  )
{
  UINTN   ReturnValue;

  ASSERT_INVALID_PCI_ADDRESS (StartAddress, 0);
  ASSERT (((StartAddress & 0xFFF) + Size) <= 0x100);

  if (Size == 0) {
    return Size;
  }

  ASSERT (Buffer != NULL);

  //
  // Save Size for return
  //
  ReturnValue = Size;

  if ((StartAddress & 1) != 0) {
    //
    // Read a byte if StartAddress is byte aligned
    //
    *(volatile UINT8 *)Buffer = PciCf8Read8 (StartAddress);
    StartAddress += sizeof (UINT8);
    Size -= sizeof (UINT8);
    Buffer = (UINT8*)Buffer + 1;
  }

  if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) {
    //
    // Read a word if StartAddress is word aligned
    //
    WriteUnaligned16 ((UINT16 *)Buffer, (UINT16) PciCf8Read16 (StartAddress));

    StartAddress += sizeof (UINT16);
    Size -= sizeof (UINT16);
    Buffer = (UINT16*)Buffer + 1;
  }

  while (Size >= sizeof (UINT32)) {
    //
    // Read as many double words as possible
    //
    WriteUnaligned32 ((UINT32 *)Buffer, (UINT32) PciCf8Read32 (StartAddress));
    StartAddress += sizeof (UINT32);
    Size -= sizeof (UINT32);
    Buffer = (UINT32*)Buffer + 1;
  }

  if (Size >= sizeof (UINT16)) {
    //
    // Read the last remaining word if exist
    //
    WriteUnaligned16 ((UINT16 *)Buffer, (UINT16) PciCf8Read16 (StartAddress));
    StartAddress += sizeof (UINT16);
    Size -= sizeof (UINT16);
    Buffer = (UINT16*)Buffer + 1;
  }

  if (Size >= sizeof (UINT8)) {
    //
    // Read the last remaining byte if exist
    //
    *(volatile UINT8 *)Buffer = PciCf8Read8 (StartAddress);
  }

  return ReturnValue;
}

/**
  Copies the data in a caller supplied buffer to a specified range of PCI
  configuration space.

  Writes the range of PCI configuration registers specified by StartAddress and
  Size from the buffer specified by Buffer. This function only allows the PCI
  configuration registers from a single PCI function to be written. Size is
  returned. When possible 32-bit PCI configuration write cycles are used to
  write from StartAdress to StartAddress + Size. Due to alignment restrictions,
  8-bit and 16-bit PCI configuration write cycles may be used at the beginning
  and the end of the range.

  If StartAddress > 0x0FFFFFFF, then ASSERT().
  If the register specified by StartAddress >= 0x100, then ASSERT().
  If ((StartAddress & 0xFFF) + Size) > 0x100, then ASSERT().
  If Size > 0 and Buffer is NULL, then ASSERT().

  @param  StartAddress  The starting address that encodes the PCI Bus, Device,
                        Function and Register.
  @param  Size          The size in bytes of the transfer.
  @param  Buffer        The pointer to a buffer containing the data to write.

  @return Size written to StartAddress.

**/
UINTN
EFIAPI
PciCf8WriteBuffer (
  IN      UINTN                     StartAddress,
  IN      UINTN                     Size,
  IN      VOID                      *Buffer
  )
{
  UINTN   ReturnValue;

  ASSERT_INVALID_PCI_ADDRESS (StartAddress, 0);
  ASSERT (((StartAddress & 0xFFF) + Size) <= 0x100);

  if (Size == 0) {
    return 0;
  }

  ASSERT (Buffer != NULL);

  //
  // Save Size for return
  //
  ReturnValue = Size;

  if ((StartAddress & 1) != 0) {
    //
    // Write a byte if StartAddress is byte aligned
    //
    PciCf8Write8 (StartAddress, *(UINT8*)Buffer);
    StartAddress += sizeof (UINT8);
    Size -= sizeof (UINT8);
    Buffer = (UINT8*)Buffer + 1;
  }

  if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) {
    //
    // Write a word if StartAddress is word aligned
    //
    PciCf8Write16 (StartAddress, ReadUnaligned16 ((UINT16*)Buffer));
    StartAddress += sizeof (UINT16);
    Size -= sizeof (UINT16);
    Buffer = (UINT16*)Buffer + 1;
  }

  while (Size >= sizeof (UINT32)) {
    //
    // Write as many double words as possible
    //
    PciCf8Write32 (StartAddress, ReadUnaligned32 ((UINT32*)Buffer));
    StartAddress += sizeof (UINT32);
    Size -= sizeof (UINT32);
    Buffer = (UINT32*)Buffer + 1;
  }

  if (Size >= sizeof (UINT16)) {
    //
    // Write the last remaining word if exist
    //
    PciCf8Write16 (StartAddress, ReadUnaligned16 ((UINT16*)Buffer));
    StartAddress += sizeof (UINT16);
    Size -= sizeof (UINT16);
    Buffer = (UINT16*)Buffer + 1;
  }

  if (Size >= sizeof (UINT8)) {
    //
    // Write the last remaining byte if exist
    //
    PciCf8Write8 (StartAddress, *(UINT8*)Buffer);
  }

  return ReturnValue;
}