- 根目录:
- kernel
- time
- jiffies.c
/***********************************************************************
* linux/kernel/time/jiffies.c
*
* This file contains the jiffies based clocksource.
*
* Copyright (C) 2004, 2005 IBM, John Stultz (johnstul@us.ibm.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
************************************************************************/
#include <linux/clocksource.h>
#include <linux/jiffies.h>
#include <linux/module.h>
#include <linux/init.h>
#include "timekeeping.h"
/* The Jiffies based clocksource is the lowest common
* denominator clock source which should function on
* all systems. It has the same coarse resolution as
* the timer interrupt frequency HZ and it suffers
* inaccuracies caused by missed or lost timer
* interrupts and the inability for the timer
* interrupt hardware to accuratly tick at the
* requested HZ value. It is also not recommended
* for "tick-less" systems.
*/
#define NSEC_PER_JIFFY ((NSEC_PER_SEC+HZ/2)/HZ)
/* Since jiffies uses a simple NSEC_PER_JIFFY multiplier
* conversion, the .shift value could be zero. However
* this would make NTP adjustments impossible as they are
* in units of 1/2^.shift. Thus we use JIFFIES_SHIFT to
* shift both the nominator and denominator the same
* amount, and give ntp adjustments in units of 1/2^8
*
* The value 8 is somewhat carefully chosen, as anything
* larger can result in overflows. NSEC_PER_JIFFY grows as
* HZ shrinks, so values greater than 8 overflow 32bits when
* HZ=100.
*/
#if HZ < 34
#define JIFFIES_SHIFT 6
#elif HZ < 67
#define JIFFIES_SHIFT 7
#else
#define JIFFIES_SHIFT 8
#endif
static cycle_t jiffies_read(struct clocksource *cs)
{
return (cycle_t) jiffies;
}
static struct clocksource clocksource_jiffies = {
.name = "jiffies",
.rating = 1, /* lowest valid rating*/
.read = jiffies_read,
.mask = 0xffffffff, /*32bits*/
.mult = NSEC_PER_JIFFY << JIFFIES_SHIFT, /* details above */
.shift = JIFFIES_SHIFT,
.max_cycles = 10,
};
__cacheline_aligned_in_smp DEFINE_SEQLOCK(jiffies_lock);
#if (BITS_PER_LONG < 64)
u64 get_jiffies_64(void)
{
unsigned long seq;
u64 ret;
do {
seq = read_seqbegin(&jiffies_lock);
ret = jiffies_64;
} while (read_seqretry(&jiffies_lock, seq));
return ret;
}
EXPORT_SYMBOL(get_jiffies_64);
#endif
EXPORT_SYMBOL(jiffies);
static int __init init_jiffies_clocksource(void)
{
return __clocksource_register(&clocksource_jiffies);
}
core_initcall(init_jiffies_clocksource);
struct clocksource * __init __weak clocksource_default_clock(void)
{
return &clocksource_jiffies;
}
struct clocksource refined_jiffies;
int register_refined_jiffies(long cycles_per_second)
{
u64 nsec_per_tick, shift_hz;
long cycles_per_tick;
refined_jiffies = clocksource_jiffies;
refined_jiffies.name = "refined-jiffies";
refined_jiffies.rating++;
/* Calc cycles per tick */
cycles_per_tick = (cycles_per_second + HZ/2)/HZ;
/* shift_hz stores hz<<8 for extra accuracy */
shift_hz = (u64)cycles_per_second << 8;
shift_hz += cycles_per_tick/2;
do_div(shift_hz, cycles_per_tick);
/* Calculate nsec_per_tick using shift_hz */
nsec_per_tick = (u64)NSEC_PER_SEC << 8;
nsec_per_tick += (u32)shift_hz/2;
do_div(nsec_per_tick, (u32)shift_hz);
refined_jiffies.mult = ((u32)nsec_per_tick) << JIFFIES_SHIFT;
__clocksource_register(&refined_jiffies);
return 0;
}