- 根目录:
- drivers
- gpu
- drm
- exynos
- exynos_drm_fimd.c
/* exynos_drm_fimd.c
*
* Copyright (C) 2011 Samsung Electronics Co.Ltd
* Authors:
* Joonyoung Shim <jy0922.shim@samsung.com>
* Inki Dae <inki.dae@samsung.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <drm/drmP.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/pm_runtime.h>
#include <linux/component.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
#include <video/of_display_timing.h>
#include <video/of_videomode.h>
#include <video/samsung_fimd.h>
#include <drm/exynos_drm.h>
#include "exynos_drm_drv.h"
#include "exynos_drm_fbdev.h"
#include "exynos_drm_crtc.h"
#include "exynos_drm_plane.h"
#include "exynos_drm_iommu.h"
/*
* FIMD stands for Fully Interactive Mobile Display and
* as a display controller, it transfers contents drawn on memory
* to a LCD Panel through Display Interfaces such as RGB or
* CPU Interface.
*/
#define MIN_FB_WIDTH_FOR_16WORD_BURST 128
/* position control register for hardware window 0, 2 ~ 4.*/
#define VIDOSD_A(win) (VIDOSD_BASE + 0x00 + (win) * 16)
#define VIDOSD_B(win) (VIDOSD_BASE + 0x04 + (win) * 16)
/*
* size control register for hardware windows 0 and alpha control register
* for hardware windows 1 ~ 4
*/
#define VIDOSD_C(win) (VIDOSD_BASE + 0x08 + (win) * 16)
/* size control register for hardware windows 1 ~ 2. */
#define VIDOSD_D(win) (VIDOSD_BASE + 0x0C + (win) * 16)
#define VIDWnALPHA0(win) (VIDW_ALPHA + 0x00 + (win) * 8)
#define VIDWnALPHA1(win) (VIDW_ALPHA + 0x04 + (win) * 8)
#define VIDWx_BUF_START(win, buf) (VIDW_BUF_START(buf) + (win) * 8)
#define VIDWx_BUF_START_S(win, buf) (VIDW_BUF_START_S(buf) + (win) * 8)
#define VIDWx_BUF_END(win, buf) (VIDW_BUF_END(buf) + (win) * 8)
#define VIDWx_BUF_SIZE(win, buf) (VIDW_BUF_SIZE(buf) + (win) * 4)
/* color key control register for hardware window 1 ~ 4. */
#define WKEYCON0_BASE(x) ((WKEYCON0 + 0x140) + ((x - 1) * 8))
/* color key value register for hardware window 1 ~ 4. */
#define WKEYCON1_BASE(x) ((WKEYCON1 + 0x140) + ((x - 1) * 8))
/* I80 / RGB trigger control register */
#define TRIGCON 0x1A4
#define TRGMODE_I80_RGB_ENABLE_I80 (1 << 0)
#define SWTRGCMD_I80_RGB_ENABLE (1 << 1)
/* display mode change control register except exynos4 */
#define VIDOUT_CON 0x000
#define VIDOUT_CON_F_I80_LDI0 (0x2 << 8)
/* I80 interface control for main LDI register */
#define I80IFCONFAx(x) (0x1B0 + (x) * 4)
#define I80IFCONFBx(x) (0x1B8 + (x) * 4)
#define LCD_CS_SETUP(x) ((x) << 16)
#define LCD_WR_SETUP(x) ((x) << 12)
#define LCD_WR_ACTIVE(x) ((x) << 8)
#define LCD_WR_HOLD(x) ((x) << 4)
#define I80IFEN_ENABLE (1 << 0)
/* FIMD has totally five hardware windows. */
#define WINDOWS_NR 5
#define CURSOR_WIN 4
struct fimd_driver_data {
unsigned int timing_base;
unsigned int lcdblk_offset;
unsigned int lcdblk_vt_shift;
unsigned int lcdblk_bypass_shift;
unsigned int has_shadowcon:1;
unsigned int has_clksel:1;
unsigned int has_limited_fmt:1;
unsigned int has_vidoutcon:1;
unsigned int has_vtsel:1;
};
static struct fimd_driver_data s3c64xx_fimd_driver_data = {
.timing_base = 0x0,
.has_clksel = 1,
.has_limited_fmt = 1,
};
static struct fimd_driver_data exynos3_fimd_driver_data = {
.timing_base = 0x20000,
.lcdblk_offset = 0x210,
.lcdblk_bypass_shift = 1,
.has_shadowcon = 1,
.has_vidoutcon = 1,
};
static struct fimd_driver_data exynos4_fimd_driver_data = {
.timing_base = 0x0,
.lcdblk_offset = 0x210,
.lcdblk_vt_shift = 10,
.lcdblk_bypass_shift = 1,
.has_shadowcon = 1,
.has_vtsel = 1,
};
static struct fimd_driver_data exynos4415_fimd_driver_data = {
.timing_base = 0x20000,
.lcdblk_offset = 0x210,
.lcdblk_vt_shift = 10,
.lcdblk_bypass_shift = 1,
.has_shadowcon = 1,
.has_vidoutcon = 1,
.has_vtsel = 1,
};
static struct fimd_driver_data exynos5_fimd_driver_data = {
.timing_base = 0x20000,
.lcdblk_offset = 0x214,
.lcdblk_vt_shift = 24,
.lcdblk_bypass_shift = 15,
.has_shadowcon = 1,
.has_vidoutcon = 1,
.has_vtsel = 1,
};
struct fimd_context {
struct device *dev;
struct drm_device *drm_dev;
struct exynos_drm_crtc *crtc;
struct exynos_drm_plane planes[WINDOWS_NR];
struct clk *bus_clk;
struct clk *lcd_clk;
void __iomem *regs;
struct regmap *sysreg;
unsigned long irq_flags;
u32 vidcon0;
u32 vidcon1;
u32 vidout_con;
u32 i80ifcon;
bool i80_if;
bool suspended;
int pipe;
wait_queue_head_t wait_vsync_queue;
atomic_t wait_vsync_event;
atomic_t win_updated;
atomic_t triggering;
struct exynos_drm_panel_info panel;
struct fimd_driver_data *driver_data;
struct drm_encoder *encoder;
};
static const struct of_device_id fimd_driver_dt_match[] = {
{ .compatible = "samsung,s3c6400-fimd",
.data = &s3c64xx_fimd_driver_data },
{ .compatible = "samsung,exynos3250-fimd",
.data = &exynos3_fimd_driver_data },
{ .compatible = "samsung,exynos4210-fimd",
.data = &exynos4_fimd_driver_data },
{ .compatible = "samsung,exynos4415-fimd",
.data = &exynos4415_fimd_driver_data },
{ .compatible = "samsung,exynos5250-fimd",
.data = &exynos5_fimd_driver_data },
{},
};
MODULE_DEVICE_TABLE(of, fimd_driver_dt_match);
static const uint32_t fimd_formats[] = {
DRM_FORMAT_C8,
DRM_FORMAT_XRGB1555,
DRM_FORMAT_RGB565,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_ARGB8888,
};
static inline struct fimd_driver_data *drm_fimd_get_driver_data(
struct platform_device *pdev)
{
const struct of_device_id *of_id =
of_match_device(fimd_driver_dt_match, &pdev->dev);
return (struct fimd_driver_data *)of_id->data;
}
static int fimd_enable_vblank(struct exynos_drm_crtc *crtc)
{
struct fimd_context *ctx = crtc->ctx;
u32 val;
if (ctx->suspended)
return -EPERM;
if (!test_and_set_bit(0, &ctx->irq_flags)) {
val = readl(ctx->regs + VIDINTCON0);
val |= VIDINTCON0_INT_ENABLE;
if (ctx->i80_if) {
val |= VIDINTCON0_INT_I80IFDONE;
val |= VIDINTCON0_INT_SYSMAINCON;
val &= ~VIDINTCON0_INT_SYSSUBCON;
} else {
val |= VIDINTCON0_INT_FRAME;
val &= ~VIDINTCON0_FRAMESEL0_MASK;
val |= VIDINTCON0_FRAMESEL0_VSYNC;
val &= ~VIDINTCON0_FRAMESEL1_MASK;
val |= VIDINTCON0_FRAMESEL1_NONE;
}
writel(val, ctx->regs + VIDINTCON0);
}
return 0;
}
static void fimd_disable_vblank(struct exynos_drm_crtc *crtc)
{
struct fimd_context *ctx = crtc->ctx;
u32 val;
if (ctx->suspended)
return;
if (test_and_clear_bit(0, &ctx->irq_flags)) {
val = readl(ctx->regs + VIDINTCON0);
val &= ~VIDINTCON0_INT_ENABLE;
if (ctx->i80_if) {
val &= ~VIDINTCON0_INT_I80IFDONE;
val &= ~VIDINTCON0_INT_SYSMAINCON;
val &= ~VIDINTCON0_INT_SYSSUBCON;
} else
val &= ~VIDINTCON0_INT_FRAME;
writel(val, ctx->regs + VIDINTCON0);
}
}
static void fimd_wait_for_vblank(struct exynos_drm_crtc *crtc)
{
struct fimd_context *ctx = crtc->ctx;
if (ctx->suspended)
return;
atomic_set(&ctx->wait_vsync_event, 1);
/*
* wait for FIMD to signal VSYNC interrupt or return after
* timeout which is set to 50ms (refresh rate of 20).
*/
if (!wait_event_timeout(ctx->wait_vsync_queue,
!atomic_read(&ctx->wait_vsync_event),
HZ/20))
DRM_DEBUG_KMS("vblank wait timed out.\n");
}
static void fimd_enable_video_output(struct fimd_context *ctx, unsigned int win,
bool enable)
{
u32 val = readl(ctx->regs + WINCON(win));
if (enable)
val |= WINCONx_ENWIN;
else
val &= ~WINCONx_ENWIN;
writel(val, ctx->regs + WINCON(win));
}
static void fimd_enable_shadow_channel_path(struct fimd_context *ctx,
unsigned int win,
bool enable)
{
u32 val = readl(ctx->regs + SHADOWCON);
if (enable)
val |= SHADOWCON_CHx_ENABLE(win);
else
val &= ~SHADOWCON_CHx_ENABLE(win);
writel(val, ctx->regs + SHADOWCON);
}
static void fimd_clear_channels(struct exynos_drm_crtc *crtc)
{
struct fimd_context *ctx = crtc->ctx;
unsigned int win, ch_enabled = 0;
DRM_DEBUG_KMS("%s\n", __FILE__);
/* Hardware is in unknown state, so ensure it gets enabled properly */
pm_runtime_get_sync(ctx->dev);
clk_prepare_enable(ctx->bus_clk);
clk_prepare_enable(ctx->lcd_clk);
/* Check if any channel is enabled. */
for (win = 0; win < WINDOWS_NR; win++) {
u32 val = readl(ctx->regs + WINCON(win));
if (val & WINCONx_ENWIN) {
fimd_enable_video_output(ctx, win, false);
if (ctx->driver_data->has_shadowcon)
fimd_enable_shadow_channel_path(ctx, win,
false);
ch_enabled = 1;
}
}
/* Wait for vsync, as disable channel takes effect at next vsync */
if (ch_enabled) {
int pipe = ctx->pipe;
/* ensure that vblank interrupt won't be reported to core */
ctx->suspended = false;
ctx->pipe = -1;
fimd_enable_vblank(ctx->crtc);
fimd_wait_for_vblank(ctx->crtc);
fimd_disable_vblank(ctx->crtc);
ctx->suspended = true;
ctx->pipe = pipe;
}
clk_disable_unprepare(ctx->lcd_clk);
clk_disable_unprepare(ctx->bus_clk);
pm_runtime_put(ctx->dev);
}
static u32 fimd_calc_clkdiv(struct fimd_context *ctx,
const struct drm_display_mode *mode)
{
unsigned long ideal_clk = mode->htotal * mode->vtotal * mode->vrefresh;
u32 clkdiv;
if (ctx->i80_if) {
/*
* The frame done interrupt should be occurred prior to the
* next TE signal.
*/
ideal_clk *= 2;
}
/* Find the clock divider value that gets us closest to ideal_clk */
clkdiv = DIV_ROUND_UP(clk_get_rate(ctx->lcd_clk), ideal_clk);
return (clkdiv < 0x100) ? clkdiv : 0xff;
}
static void fimd_commit(struct exynos_drm_crtc *crtc)
{
struct fimd_context *ctx = crtc->ctx;
struct drm_display_mode *mode = &crtc->base.state->adjusted_mode;
struct fimd_driver_data *driver_data = ctx->driver_data;
void *timing_base = ctx->regs + driver_data->timing_base;
u32 val, clkdiv;
if (ctx->suspended)
return;
/* nothing to do if we haven't set the mode yet */
if (mode->htotal == 0 || mode->vtotal == 0)
return;
if (ctx->i80_if) {
val = ctx->i80ifcon | I80IFEN_ENABLE;
writel(val, timing_base + I80IFCONFAx(0));
/* disable auto frame rate */
writel(0, timing_base + I80IFCONFBx(0));
/* set video type selection to I80 interface */
if (driver_data->has_vtsel && ctx->sysreg &&
regmap_update_bits(ctx->sysreg,
driver_data->lcdblk_offset,
0x3 << driver_data->lcdblk_vt_shift,
0x1 << driver_data->lcdblk_vt_shift)) {
DRM_ERROR("Failed to update sysreg for I80 i/f.\n");
return;
}
} else {
int vsync_len, vbpd, vfpd, hsync_len, hbpd, hfpd;
u32 vidcon1;
/* setup polarity values */
vidcon1 = ctx->vidcon1;
if (mode->flags & DRM_MODE_FLAG_NVSYNC)
vidcon1 |= VIDCON1_INV_VSYNC;
if (mode->flags & DRM_MODE_FLAG_NHSYNC)
vidcon1 |= VIDCON1_INV_HSYNC;
writel(vidcon1, ctx->regs + driver_data->timing_base + VIDCON1);
/* setup vertical timing values. */
vsync_len = mode->crtc_vsync_end - mode->crtc_vsync_start;
vbpd = mode->crtc_vtotal - mode->crtc_vsync_end;
vfpd = mode->crtc_vsync_start - mode->crtc_vdisplay;
val = VIDTCON0_VBPD(vbpd - 1) |
VIDTCON0_VFPD(vfpd - 1) |
VIDTCON0_VSPW(vsync_len - 1);
writel(val, ctx->regs + driver_data->timing_base + VIDTCON0);
/* setup horizontal timing values. */
hsync_len = mode->crtc_hsync_end - mode->crtc_hsync_start;
hbpd = mode->crtc_htotal - mode->crtc_hsync_end;
hfpd = mode->crtc_hsync_start - mode->crtc_hdisplay;
val = VIDTCON1_HBPD(hbpd - 1) |
VIDTCON1_HFPD(hfpd - 1) |
VIDTCON1_HSPW(hsync_len - 1);
writel(val, ctx->regs + driver_data->timing_base + VIDTCON1);
}
if (driver_data->has_vidoutcon)
writel(ctx->vidout_con, timing_base + VIDOUT_CON);
/* set bypass selection */
if (ctx->sysreg && regmap_update_bits(ctx->sysreg,
driver_data->lcdblk_offset,
0x1 << driver_data->lcdblk_bypass_shift,
0x1 << driver_data->lcdblk_bypass_shift)) {
DRM_ERROR("Failed to update sysreg for bypass setting.\n");
return;
}
/* setup horizontal and vertical display size. */
val = VIDTCON2_LINEVAL(mode->vdisplay - 1) |
VIDTCON2_HOZVAL(mode->hdisplay - 1) |
VIDTCON2_LINEVAL_E(mode->vdisplay - 1) |
VIDTCON2_HOZVAL_E(mode->hdisplay - 1);
writel(val, ctx->regs + driver_data->timing_base + VIDTCON2);
/*
* fields of register with prefix '_F' would be updated
* at vsync(same as dma start)
*/
val = ctx->vidcon0;
val |= VIDCON0_ENVID | VIDCON0_ENVID_F;
if (ctx->driver_data->has_clksel)
val |= VIDCON0_CLKSEL_LCD;
clkdiv = fimd_calc_clkdiv(ctx, mode);
if (clkdiv > 1)
val |= VIDCON0_CLKVAL_F(clkdiv - 1) | VIDCON0_CLKDIR;
writel(val, ctx->regs + VIDCON0);
}
static void fimd_win_set_pixfmt(struct fimd_context *ctx, unsigned int win,
struct drm_framebuffer *fb)
{
unsigned long val;
val = WINCONx_ENWIN;
/*
* In case of s3c64xx, window 0 doesn't support alpha channel.
* So the request format is ARGB8888 then change it to XRGB8888.
*/
if (ctx->driver_data->has_limited_fmt && !win) {
if (fb->pixel_format == DRM_FORMAT_ARGB8888)
fb->pixel_format = DRM_FORMAT_XRGB8888;
}
switch (fb->pixel_format) {
case DRM_FORMAT_C8:
val |= WINCON0_BPPMODE_8BPP_PALETTE;
val |= WINCONx_BURSTLEN_8WORD;
val |= WINCONx_BYTSWP;
break;
case DRM_FORMAT_XRGB1555:
val |= WINCON0_BPPMODE_16BPP_1555;
val |= WINCONx_HAWSWP;
val |= WINCONx_BURSTLEN_16WORD;
break;
case DRM_FORMAT_RGB565:
val |= WINCON0_BPPMODE_16BPP_565;
val |= WINCONx_HAWSWP;
val |= WINCONx_BURSTLEN_16WORD;
break;
case DRM_FORMAT_XRGB8888:
val |= WINCON0_BPPMODE_24BPP_888;
val |= WINCONx_WSWP;
val |= WINCONx_BURSTLEN_16WORD;
break;
case DRM_FORMAT_ARGB8888:
val |= WINCON1_BPPMODE_25BPP_A1888
| WINCON1_BLD_PIX | WINCON1_ALPHA_SEL;
val |= WINCONx_WSWP;
val |= WINCONx_BURSTLEN_16WORD;
break;
default:
DRM_DEBUG_KMS("invalid pixel size so using unpacked 24bpp.\n");
val |= WINCON0_BPPMODE_24BPP_888;
val |= WINCONx_WSWP;
val |= WINCONx_BURSTLEN_16WORD;
break;
}
DRM_DEBUG_KMS("bpp = %d\n", fb->bits_per_pixel);
/*
* In case of exynos, setting dma-burst to 16Word causes permanent
* tearing for very small buffers, e.g. cursor buffer. Burst Mode
* switching which is based on plane size is not recommended as
* plane size varies alot towards the end of the screen and rapid
* movement causes unstable DMA which results into iommu crash/tear.
*/
if (fb->width < MIN_FB_WIDTH_FOR_16WORD_BURST) {
val &= ~WINCONx_BURSTLEN_MASK;
val |= WINCONx_BURSTLEN_4WORD;
}
writel(val, ctx->regs + WINCON(win));
/* hardware window 0 doesn't support alpha channel. */
if (win != 0) {
/* OSD alpha */
val = VIDISD14C_ALPHA0_R(0xf) |
VIDISD14C_ALPHA0_G(0xf) |
VIDISD14C_ALPHA0_B(0xf) |
VIDISD14C_ALPHA1_R(0xf) |
VIDISD14C_ALPHA1_G(0xf) |
VIDISD14C_ALPHA1_B(0xf);
writel(val, ctx->regs + VIDOSD_C(win));
val = VIDW_ALPHA_R(0xf) | VIDW_ALPHA_G(0xf) |
VIDW_ALPHA_G(0xf);
writel(val, ctx->regs + VIDWnALPHA0(win));
writel(val, ctx->regs + VIDWnALPHA1(win));
}
}
static void fimd_win_set_colkey(struct fimd_context *ctx, unsigned int win)
{
unsigned int keycon0 = 0, keycon1 = 0;
keycon0 = ~(WxKEYCON0_KEYBL_EN | WxKEYCON0_KEYEN_F |
WxKEYCON0_DIRCON) | WxKEYCON0_COMPKEY(0);
keycon1 = WxKEYCON1_COLVAL(0xffffffff);
writel(keycon0, ctx->regs + WKEYCON0_BASE(win));
writel(keycon1, ctx->regs + WKEYCON1_BASE(win));
}
/**
* shadow_protect_win() - disable updating values from shadow registers at vsync
*
* @win: window to protect registers for
* @protect: 1 to protect (disable updates)
*/
static void fimd_shadow_protect_win(struct fimd_context *ctx,
unsigned int win, bool protect)
{
u32 reg, bits, val;
/*
* SHADOWCON/PRTCON register is used for enabling timing.
*
* for example, once only width value of a register is set,
* if the dma is started then fimd hardware could malfunction so
* with protect window setting, the register fields with prefix '_F'
* wouldn't be updated at vsync also but updated once unprotect window
* is set.
*/
if (ctx->driver_data->has_shadowcon) {
reg = SHADOWCON;
bits = SHADOWCON_WINx_PROTECT(win);
} else {
reg = PRTCON;
bits = PRTCON_PROTECT;
}
val = readl(ctx->regs + reg);
if (protect)
val |= bits;
else
val &= ~bits;
writel(val, ctx->regs + reg);
}
static void fimd_atomic_begin(struct exynos_drm_crtc *crtc,
struct exynos_drm_plane *plane)
{
struct fimd_context *ctx = crtc->ctx;
if (ctx->suspended)
return;
fimd_shadow_protect_win(ctx, plane->zpos, true);
}
static void fimd_atomic_flush(struct exynos_drm_crtc *crtc,
struct exynos_drm_plane *plane)
{
struct fimd_context *ctx = crtc->ctx;
if (ctx->suspended)
return;
fimd_shadow_protect_win(ctx, plane->zpos, false);
}
static void fimd_update_plane(struct exynos_drm_crtc *crtc,
struct exynos_drm_plane *plane)
{
struct fimd_context *ctx = crtc->ctx;
struct drm_plane_state *state = plane->base.state;
dma_addr_t dma_addr;
unsigned long val, size, offset;
unsigned int last_x, last_y, buf_offsize, line_size;
unsigned int win = plane->zpos;
unsigned int bpp = state->fb->bits_per_pixel >> 3;
unsigned int pitch = state->fb->pitches[0];
if (ctx->suspended)
return;
offset = plane->src_x * bpp;
offset += plane->src_y * pitch;
/* buffer start address */
dma_addr = plane->dma_addr[0] + offset;
val = (unsigned long)dma_addr;
writel(val, ctx->regs + VIDWx_BUF_START(win, 0));
/* buffer end address */
size = pitch * plane->crtc_h;
val = (unsigned long)(dma_addr + size);
writel(val, ctx->regs + VIDWx_BUF_END(win, 0));
DRM_DEBUG_KMS("start addr = 0x%lx, end addr = 0x%lx, size = 0x%lx\n",
(unsigned long)dma_addr, val, size);
DRM_DEBUG_KMS("ovl_width = %d, ovl_height = %d\n",
plane->crtc_w, plane->crtc_h);
/* buffer size */
buf_offsize = pitch - (plane->crtc_w * bpp);
line_size = plane->crtc_w * bpp;
val = VIDW_BUF_SIZE_OFFSET(buf_offsize) |
VIDW_BUF_SIZE_PAGEWIDTH(line_size) |
VIDW_BUF_SIZE_OFFSET_E(buf_offsize) |
VIDW_BUF_SIZE_PAGEWIDTH_E(line_size);
writel(val, ctx->regs + VIDWx_BUF_SIZE(win, 0));
/* OSD position */
val = VIDOSDxA_TOPLEFT_X(plane->crtc_x) |
VIDOSDxA_TOPLEFT_Y(plane->crtc_y) |
VIDOSDxA_TOPLEFT_X_E(plane->crtc_x) |
VIDOSDxA_TOPLEFT_Y_E(plane->crtc_y);
writel(val, ctx->regs + VIDOSD_A(win));
last_x = plane->crtc_x + plane->crtc_w;
if (last_x)
last_x--;
last_y = plane->crtc_y + plane->crtc_h;
if (last_y)
last_y--;
val = VIDOSDxB_BOTRIGHT_X(last_x) | VIDOSDxB_BOTRIGHT_Y(last_y) |
VIDOSDxB_BOTRIGHT_X_E(last_x) | VIDOSDxB_BOTRIGHT_Y_E(last_y);
writel(val, ctx->regs + VIDOSD_B(win));
DRM_DEBUG_KMS("osd pos: tx = %d, ty = %d, bx = %d, by = %d\n",
plane->crtc_x, plane->crtc_y, last_x, last_y);
/* OSD size */
if (win != 3 && win != 4) {
u32 offset = VIDOSD_D(win);
if (win == 0)
offset = VIDOSD_C(win);
val = plane->crtc_w * plane->crtc_h;
writel(val, ctx->regs + offset);
DRM_DEBUG_KMS("osd size = 0x%x\n", (unsigned int)val);
}
fimd_win_set_pixfmt(ctx, win, state->fb);
/* hardware window 0 doesn't support color key. */
if (win != 0)
fimd_win_set_colkey(ctx, win);
fimd_enable_video_output(ctx, win, true);
if (ctx->driver_data->has_shadowcon)
fimd_enable_shadow_channel_path(ctx, win, true);
if (ctx->i80_if)
atomic_set(&ctx->win_updated, 1);
}
static void fimd_disable_plane(struct exynos_drm_crtc *crtc,
struct exynos_drm_plane *plane)
{
struct fimd_context *ctx = crtc->ctx;
unsigned int win = plane->zpos;
if (ctx->suspended)
return;
fimd_enable_video_output(ctx, win, false);
if (ctx->driver_data->has_shadowcon)
fimd_enable_shadow_channel_path(ctx, win, false);
}
static void fimd_enable(struct exynos_drm_crtc *crtc)
{
struct fimd_context *ctx = crtc->ctx;
int ret;
if (!ctx->suspended)
return;
ctx->suspended = false;
pm_runtime_get_sync(ctx->dev);
ret = clk_prepare_enable(ctx->bus_clk);
if (ret < 0) {
DRM_ERROR("Failed to prepare_enable the bus clk [%d]\n", ret);
return;
}
ret = clk_prepare_enable(ctx->lcd_clk);
if (ret < 0) {
DRM_ERROR("Failed to prepare_enable the lcd clk [%d]\n", ret);
return;
}
/* if vblank was enabled status, enable it again. */
if (test_and_clear_bit(0, &ctx->irq_flags))
fimd_enable_vblank(ctx->crtc);
fimd_commit(ctx->crtc);
}
static void fimd_disable(struct exynos_drm_crtc *crtc)
{
struct fimd_context *ctx = crtc->ctx;
int i;
if (ctx->suspended)
return;
/*
* We need to make sure that all windows are disabled before we
* suspend that connector. Otherwise we might try to scan from
* a destroyed buffer later.
*/
for (i = 0; i < WINDOWS_NR; i++)
fimd_disable_plane(crtc, &ctx->planes[i]);
fimd_enable_vblank(crtc);
fimd_wait_for_vblank(crtc);
fimd_disable_vblank(crtc);
writel(0, ctx->regs + VIDCON0);
clk_disable_unprepare(ctx->lcd_clk);
clk_disable_unprepare(ctx->bus_clk);
pm_runtime_put_sync(ctx->dev);
ctx->suspended = true;
}
static void fimd_trigger(struct device *dev)
{
struct fimd_context *ctx = dev_get_drvdata(dev);
struct fimd_driver_data *driver_data = ctx->driver_data;
void *timing_base = ctx->regs + driver_data->timing_base;
u32 reg;
/*
* Skips triggering if in triggering state, because multiple triggering
* requests can cause panel reset.
*/
if (atomic_read(&ctx->triggering))
return;
/* Enters triggering mode */
atomic_set(&ctx->triggering, 1);
reg = readl(timing_base + TRIGCON);
reg |= (TRGMODE_I80_RGB_ENABLE_I80 | SWTRGCMD_I80_RGB_ENABLE);
writel(reg, timing_base + TRIGCON);
/*
* Exits triggering mode if vblank is not enabled yet, because when the
* VIDINTCON0 register is not set, it can not exit from triggering mode.
*/
if (!test_bit(0, &ctx->irq_flags))
atomic_set(&ctx->triggering, 0);
}
static void fimd_te_handler(struct exynos_drm_crtc *crtc)
{
struct fimd_context *ctx = crtc->ctx;
/* Checks the crtc is detached already from encoder */
if (ctx->pipe < 0 || !ctx->drm_dev)
return;
/*
* If there is a page flip request, triggers and handles the page flip
* event so that current fb can be updated into panel GRAM.
*/
if (atomic_add_unless(&ctx->win_updated, -1, 0))
fimd_trigger(ctx->dev);
/* Wakes up vsync event queue */
if (atomic_read(&ctx->wait_vsync_event)) {
atomic_set(&ctx->wait_vsync_event, 0);
wake_up(&ctx->wait_vsync_queue);
}
if (test_bit(0, &ctx->irq_flags))
drm_crtc_handle_vblank(&ctx->crtc->base);
}
static void fimd_dp_clock_enable(struct exynos_drm_crtc *crtc, bool enable)
{
struct fimd_context *ctx = crtc->ctx;
u32 val;
/*
* Only Exynos 5250, 5260, 5410 and 542x requires enabling DP/MIE
* clock. On these SoCs the bootloader may enable it but any
* power domain off/on will reset it to disable state.
*/
if (ctx->driver_data != &exynos5_fimd_driver_data)
return;
val = enable ? DP_MIE_CLK_DP_ENABLE : DP_MIE_CLK_DISABLE;
writel(val, ctx->regs + DP_MIE_CLKCON);
}
static const struct exynos_drm_crtc_ops fimd_crtc_ops = {
.enable = fimd_enable,
.disable = fimd_disable,
.commit = fimd_commit,
.enable_vblank = fimd_enable_vblank,
.disable_vblank = fimd_disable_vblank,
.wait_for_vblank = fimd_wait_for_vblank,
.atomic_begin = fimd_atomic_begin,
.update_plane = fimd_update_plane,
.disable_plane = fimd_disable_plane,
.atomic_flush = fimd_atomic_flush,
.te_handler = fimd_te_handler,
.clock_enable = fimd_dp_clock_enable,
};
static irqreturn_t fimd_irq_handler(int irq, void *dev_id)
{
struct fimd_context *ctx = (struct fimd_context *)dev_id;
u32 val, clear_bit, start, start_s;
int win;
val = readl(ctx->regs + VIDINTCON1);
clear_bit = ctx->i80_if ? VIDINTCON1_INT_I80 : VIDINTCON1_INT_FRAME;
if (val & clear_bit)
writel(clear_bit, ctx->regs + VIDINTCON1);
/* check the crtc is detached already from encoder */
if (ctx->pipe < 0 || !ctx->drm_dev)
goto out;
if (!ctx->i80_if)
drm_crtc_handle_vblank(&ctx->crtc->base);
for (win = 0 ; win < WINDOWS_NR ; win++) {
struct exynos_drm_plane *plane = &ctx->planes[win];
if (!plane->pending_fb)
continue;
start = readl(ctx->regs + VIDWx_BUF_START(win, 0));
start_s = readl(ctx->regs + VIDWx_BUF_START_S(win, 0));
if (start == start_s)
exynos_drm_crtc_finish_update(ctx->crtc, plane);
}
if (ctx->i80_if) {
/* Exits triggering mode */
atomic_set(&ctx->triggering, 0);
} else {
/* set wait vsync event to zero and wake up queue. */
if (atomic_read(&ctx->wait_vsync_event)) {
atomic_set(&ctx->wait_vsync_event, 0);
wake_up(&ctx->wait_vsync_queue);
}
}
out:
return IRQ_HANDLED;
}
static int fimd_bind(struct device *dev, struct device *master, void *data)
{
struct fimd_context *ctx = dev_get_drvdata(dev);
struct drm_device *drm_dev = data;
struct exynos_drm_private *priv = drm_dev->dev_private;
struct exynos_drm_plane *exynos_plane;
enum drm_plane_type type;
unsigned int zpos;
int ret;
ctx->drm_dev = drm_dev;
ctx->pipe = priv->pipe++;
for (zpos = 0; zpos < WINDOWS_NR; zpos++) {
type = exynos_plane_get_type(zpos, CURSOR_WIN);
ret = exynos_plane_init(drm_dev, &ctx->planes[zpos],
1 << ctx->pipe, type, fimd_formats,
ARRAY_SIZE(fimd_formats), zpos);
if (ret)
return ret;
}
exynos_plane = &ctx->planes[DEFAULT_WIN];
ctx->crtc = exynos_drm_crtc_create(drm_dev, &exynos_plane->base,
ctx->pipe, EXYNOS_DISPLAY_TYPE_LCD,
&fimd_crtc_ops, ctx);
if (IS_ERR(ctx->crtc))
return PTR_ERR(ctx->crtc);
if (ctx->encoder)
exynos_dpi_bind(drm_dev, ctx->encoder);
if (is_drm_iommu_supported(drm_dev))
fimd_clear_channels(ctx->crtc);
ret = drm_iommu_attach_device(drm_dev, dev);
if (ret)
priv->pipe--;
return ret;
}
static void fimd_unbind(struct device *dev, struct device *master,
void *data)
{
struct fimd_context *ctx = dev_get_drvdata(dev);
fimd_disable(ctx->crtc);
drm_iommu_detach_device(ctx->drm_dev, ctx->dev);
if (ctx->encoder)
exynos_dpi_remove(ctx->encoder);
}
static const struct component_ops fimd_component_ops = {
.bind = fimd_bind,
.unbind = fimd_unbind,
};
static int fimd_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct fimd_context *ctx;
struct device_node *i80_if_timings;
struct resource *res;
int ret;
if (!dev->of_node)
return -ENODEV;
ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
ctx->dev = dev;
ctx->suspended = true;
ctx->driver_data = drm_fimd_get_driver_data(pdev);
if (of_property_read_bool(dev->of_node, "samsung,invert-vden"))
ctx->vidcon1 |= VIDCON1_INV_VDEN;
if (of_property_read_bool(dev->of_node, "samsung,invert-vclk"))
ctx->vidcon1 |= VIDCON1_INV_VCLK;
i80_if_timings = of_get_child_by_name(dev->of_node, "i80-if-timings");
if (i80_if_timings) {
u32 val;
ctx->i80_if = true;
if (ctx->driver_data->has_vidoutcon)
ctx->vidout_con |= VIDOUT_CON_F_I80_LDI0;
else
ctx->vidcon0 |= VIDCON0_VIDOUT_I80_LDI0;
/*
* The user manual describes that this "DSI_EN" bit is required
* to enable I80 24-bit data interface.
*/
ctx->vidcon0 |= VIDCON0_DSI_EN;
if (of_property_read_u32(i80_if_timings, "cs-setup", &val))
val = 0;
ctx->i80ifcon = LCD_CS_SETUP(val);
if (of_property_read_u32(i80_if_timings, "wr-setup", &val))
val = 0;
ctx->i80ifcon |= LCD_WR_SETUP(val);
if (of_property_read_u32(i80_if_timings, "wr-active", &val))
val = 1;
ctx->i80ifcon |= LCD_WR_ACTIVE(val);
if (of_property_read_u32(i80_if_timings, "wr-hold", &val))
val = 0;
ctx->i80ifcon |= LCD_WR_HOLD(val);
}
of_node_put(i80_if_timings);
ctx->sysreg = syscon_regmap_lookup_by_phandle(dev->of_node,
"samsung,sysreg");
if (IS_ERR(ctx->sysreg)) {
dev_warn(dev, "failed to get system register.\n");
ctx->sysreg = NULL;
}
ctx->bus_clk = devm_clk_get(dev, "fimd");
if (IS_ERR(ctx->bus_clk)) {
dev_err(dev, "failed to get bus clock\n");
return PTR_ERR(ctx->bus_clk);
}
ctx->lcd_clk = devm_clk_get(dev, "sclk_fimd");
if (IS_ERR(ctx->lcd_clk)) {
dev_err(dev, "failed to get lcd clock\n");
return PTR_ERR(ctx->lcd_clk);
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
ctx->regs = devm_ioremap_resource(dev, res);
if (IS_ERR(ctx->regs))
return PTR_ERR(ctx->regs);
res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
ctx->i80_if ? "lcd_sys" : "vsync");
if (!res) {
dev_err(dev, "irq request failed.\n");
return -ENXIO;
}
ret = devm_request_irq(dev, res->start, fimd_irq_handler,
0, "drm_fimd", ctx);
if (ret) {
dev_err(dev, "irq request failed.\n");
return ret;
}
init_waitqueue_head(&ctx->wait_vsync_queue);
atomic_set(&ctx->wait_vsync_event, 0);
platform_set_drvdata(pdev, ctx);
ctx->encoder = exynos_dpi_probe(dev);
if (IS_ERR(ctx->encoder))
return PTR_ERR(ctx->encoder);
pm_runtime_enable(dev);
ret = component_add(dev, &fimd_component_ops);
if (ret)
goto err_disable_pm_runtime;
return ret;
err_disable_pm_runtime:
pm_runtime_disable(dev);
return ret;
}
static int fimd_remove(struct platform_device *pdev)
{
pm_runtime_disable(&pdev->dev);
component_del(&pdev->dev, &fimd_component_ops);
return 0;
}
struct platform_driver fimd_driver = {
.probe = fimd_probe,
.remove = fimd_remove,
.driver = {
.name = "exynos4-fb",
.owner = THIS_MODULE,
.of_match_table = fimd_driver_dt_match,
},
};