- 根目录:
- arch
- xtensa
- variants
- dc232b
- include
- variant
- tie.h
/*
* This header file describes this specific Xtensa processor's TIE extensions
* that extend basic Xtensa core functionality. It is customized to this
* Xtensa processor configuration.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1999-2007 Tensilica Inc.
*/
#ifndef _XTENSA_CORE_TIE_H
#define _XTENSA_CORE_TIE_H
#define XCHAL_CP_NUM 1 /* number of coprocessors */
#define XCHAL_CP_MAX 8 /* max CP ID + 1 (0 if none) */
#define XCHAL_CP_MASK 0x80 /* bitmask of all CPs by ID */
#define XCHAL_CP_PORT_MASK 0x80 /* bitmask of only port CPs */
/* Basic parameters of each coprocessor: */
#define XCHAL_CP7_NAME "XTIOP"
#define XCHAL_CP7_IDENT XTIOP
#define XCHAL_CP7_SA_SIZE 0 /* size of state save area */
#define XCHAL_CP7_SA_ALIGN 1 /* min alignment of save area */
#define XCHAL_CP_ID_XTIOP 7 /* coprocessor ID (0..7) */
/* Filler info for unassigned coprocessors, to simplify arrays etc: */
#define XCHAL_CP0_SA_SIZE 0
#define XCHAL_CP0_SA_ALIGN 1
#define XCHAL_CP1_SA_SIZE 0
#define XCHAL_CP1_SA_ALIGN 1
#define XCHAL_CP2_SA_SIZE 0
#define XCHAL_CP2_SA_ALIGN 1
#define XCHAL_CP3_SA_SIZE 0
#define XCHAL_CP3_SA_ALIGN 1
#define XCHAL_CP4_SA_SIZE 0
#define XCHAL_CP4_SA_ALIGN 1
#define XCHAL_CP5_SA_SIZE 0
#define XCHAL_CP5_SA_ALIGN 1
#define XCHAL_CP6_SA_SIZE 0
#define XCHAL_CP6_SA_ALIGN 1
/* Save area for non-coprocessor optional and custom (TIE) state: */
#define XCHAL_NCP_SA_SIZE 32
#define XCHAL_NCP_SA_ALIGN 4
/* Total save area for optional and custom state (NCP + CPn): */
#define XCHAL_TOTAL_SA_SIZE 32 /* with 16-byte align padding */
#define XCHAL_TOTAL_SA_ALIGN 4 /* actual minimum alignment */
/*
* Detailed contents of save areas.
* NOTE: caller must define the XCHAL_SA_REG macro (not defined here)
* before expanding the XCHAL_xxx_SA_LIST() macros.
*
* XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize,
* dbnum,base,regnum,bitsz,gapsz,reset,x...)
*
* s = passed from XCHAL_*_LIST(s), eg. to select how to expand
* ccused = set if used by compiler without special options or code
* abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global)
* kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg)
* opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg)
* name = lowercase reg name (no quotes)
* galign = group byte alignment (power of 2) (galign >= align)
* align = register byte alignment (power of 2)
* asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz)
* (not including any pad bytes required to galign this or next reg)
* dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>)
* base = reg shortname w/o index (or sr=special, ur=TIE user reg)
* regnum = reg index in regfile, or special/TIE-user reg number
* bitsz = number of significant bits (regfile width, or ur/sr mask bits)
* gapsz = intervening bits, if bitsz bits not stored contiguously
* (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize)
* reset = register reset value (or 0 if undefined at reset)
* x = reserved for future use (0 until then)
*
* To filter out certain registers, e.g. to expand only the non-global
* registers used by the compiler, you can do something like this:
*
* #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p)
* #define SELCC0(p...)
* #define SELCC1(abikind,p...) SELAK##abikind(p)
* #define SELAK0(p...) REG(p)
* #define SELAK1(p...) REG(p)
* #define SELAK2(p...)
* #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \
* ...what you want to expand...
*/
#define XCHAL_NCP_SA_NUM 8
#define XCHAL_NCP_SA_LIST(s) \
XCHAL_SA_REG(s,1,0,0,1, acclo, 4, 4, 4,0x0210, sr,16 , 32,0,0,0) \
XCHAL_SA_REG(s,1,0,0,1, acchi, 4, 4, 4,0x0211, sr,17 , 8,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, m0, 4, 4, 4,0x0220, sr,32 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, m1, 4, 4, 4,0x0221, sr,33 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, m2, 4, 4, 4,0x0222, sr,34 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, m3, 4, 4, 4,0x0223, sr,35 , 32,0,0,0) \
XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0) \
XCHAL_SA_REG(s,1,2,1,1, threadptr, 4, 4, 4,0x03E7, ur,231, 32,0,0,0)
#define XCHAL_CP0_SA_NUM 0
#define XCHAL_CP0_SA_LIST(s) /* empty */
#define XCHAL_CP1_SA_NUM 0
#define XCHAL_CP1_SA_LIST(s) /* empty */
#define XCHAL_CP2_SA_NUM 0
#define XCHAL_CP2_SA_LIST(s) /* empty */
#define XCHAL_CP3_SA_NUM 0
#define XCHAL_CP3_SA_LIST(s) /* empty */
#define XCHAL_CP4_SA_NUM 0
#define XCHAL_CP4_SA_LIST(s) /* empty */
#define XCHAL_CP5_SA_NUM 0
#define XCHAL_CP5_SA_LIST(s) /* empty */
#define XCHAL_CP6_SA_NUM 0
#define XCHAL_CP6_SA_LIST(s) /* empty */
#define XCHAL_CP7_SA_NUM 0
#define XCHAL_CP7_SA_LIST(s) /* empty */
/* Byte length of instruction from its first nibble (op0 field), per FLIX. */
#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3
#endif /*_XTENSA_CORE_TIE_H*/