/*
* wm8961.c -- WM8961 ALSA SoC Audio driver
*
* Copyright 2009-10 Wolfson Microelectronics, plc
*
* Author: Mark Brown
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Currently unimplemented features:
* - ALC
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
#include <sound/initval.h>
#include <sound/tlv.h>
#include "wm8961.h"
#define WM8961_MAX_REGISTER 0xFC
static const struct reg_default wm8961_reg_defaults[] = {
{ 0, 0x009F }, /* R0 - Left Input volume */
{ 1, 0x009F }, /* R1 - Right Input volume */
{ 2, 0x0000 }, /* R2 - LOUT1 volume */
{ 3, 0x0000 }, /* R3 - ROUT1 volume */
{ 4, 0x0020 }, /* R4 - Clocking1 */
{ 5, 0x0008 }, /* R5 - ADC & DAC Control 1 */
{ 6, 0x0000 }, /* R6 - ADC & DAC Control 2 */
{ 7, 0x000A }, /* R7 - Audio Interface 0 */
{ 8, 0x01F4 }, /* R8 - Clocking2 */
{ 9, 0x0000 }, /* R9 - Audio Interface 1 */
{ 10, 0x00FF }, /* R10 - Left DAC volume */
{ 11, 0x00FF }, /* R11 - Right DAC volume */
{ 14, 0x0040 }, /* R14 - Audio Interface 2 */
{ 17, 0x007B }, /* R17 - ALC1 */
{ 18, 0x0000 }, /* R18 - ALC2 */
{ 19, 0x0032 }, /* R19 - ALC3 */
{ 20, 0x0000 }, /* R20 - Noise Gate */
{ 21, 0x00C0 }, /* R21 - Left ADC volume */
{ 22, 0x00C0 }, /* R22 - Right ADC volume */
{ 23, 0x0120 }, /* R23 - Additional control(1) */
{ 24, 0x0000 }, /* R24 - Additional control(2) */
{ 25, 0x0000 }, /* R25 - Pwr Mgmt (1) */
{ 26, 0x0000 }, /* R26 - Pwr Mgmt (2) */
{ 27, 0x0000 }, /* R27 - Additional Control (3) */
{ 28, 0x0000 }, /* R28 - Anti-pop */
{ 30, 0x005F }, /* R30 - Clocking 3 */
{ 32, 0x0000 }, /* R32 - ADCL signal path */
{ 33, 0x0000 }, /* R33 - ADCR signal path */
{ 40, 0x0000 }, /* R40 - LOUT2 volume */
{ 41, 0x0000 }, /* R41 - ROUT2 volume */
{ 47, 0x0000 }, /* R47 - Pwr Mgmt (3) */
{ 48, 0x0023 }, /* R48 - Additional Control (4) */
{ 49, 0x0000 }, /* R49 - Class D Control 1 */
{ 51, 0x0003 }, /* R51 - Class D Control 2 */
{ 56, 0x0106 }, /* R56 - Clocking 4 */
{ 57, 0x0000 }, /* R57 - DSP Sidetone 0 */
{ 58, 0x0000 }, /* R58 - DSP Sidetone 1 */
{ 60, 0x0000 }, /* R60 - DC Servo 0 */
{ 61, 0x0000 }, /* R61 - DC Servo 1 */
{ 63, 0x015E }, /* R63 - DC Servo 3 */
{ 65, 0x0010 }, /* R65 - DC Servo 5 */
{ 68, 0x0003 }, /* R68 - Analogue PGA Bias */
{ 69, 0x0000 }, /* R69 - Analogue HP 0 */
{ 71, 0x01FB }, /* R71 - Analogue HP 2 */
{ 72, 0x0000 }, /* R72 - Charge Pump 1 */
{ 82, 0x0000 }, /* R82 - Charge Pump B */
{ 87, 0x0000 }, /* R87 - Write Sequencer 1 */
{ 88, 0x0000 }, /* R88 - Write Sequencer 2 */
{ 89, 0x0000 }, /* R89 - Write Sequencer 3 */
{ 90, 0x0000 }, /* R90 - Write Sequencer 4 */
{ 91, 0x0000 }, /* R91 - Write Sequencer 5 */
{ 92, 0x0000 }, /* R92 - Write Sequencer 6 */
{ 93, 0x0000 }, /* R93 - Write Sequencer 7 */
{ 252, 0x0001 }, /* R252 - General test 1 */
};
struct wm8961_priv {
struct regmap *regmap;
int sysclk;
};
static bool wm8961_volatile(struct device *dev, unsigned int reg)
{
switch (reg) {
case WM8961_SOFTWARE_RESET:
case WM8961_WRITE_SEQUENCER_7:
case WM8961_DC_SERVO_1:
return true;
default:
return false;
}
}
static bool wm8961_readable(struct device *dev, unsigned int reg)
{
switch (reg) {
case WM8961_LEFT_INPUT_VOLUME:
case WM8961_RIGHT_INPUT_VOLUME:
case WM8961_LOUT1_VOLUME:
case WM8961_ROUT1_VOLUME:
case WM8961_CLOCKING1:
case WM8961_ADC_DAC_CONTROL_1:
case WM8961_ADC_DAC_CONTROL_2:
case WM8961_AUDIO_INTERFACE_0:
case WM8961_CLOCKING2:
case WM8961_AUDIO_INTERFACE_1:
case WM8961_LEFT_DAC_VOLUME:
case WM8961_RIGHT_DAC_VOLUME:
case WM8961_AUDIO_INTERFACE_2:
case WM8961_SOFTWARE_RESET:
case WM8961_ALC1:
case WM8961_ALC2:
case WM8961_ALC3:
case WM8961_NOISE_GATE:
case WM8961_LEFT_ADC_VOLUME:
case WM8961_RIGHT_ADC_VOLUME:
case WM8961_ADDITIONAL_CONTROL_1:
case WM8961_ADDITIONAL_CONTROL_2:
case WM8961_PWR_MGMT_1:
case WM8961_PWR_MGMT_2:
case WM8961_ADDITIONAL_CONTROL_3:
case WM8961_ANTI_POP:
case WM8961_CLOCKING_3:
case WM8961_ADCL_SIGNAL_PATH:
case WM8961_ADCR_SIGNAL_PATH:
case WM8961_LOUT2_VOLUME:
case WM8961_ROUT2_VOLUME:
case WM8961_PWR_MGMT_3:
case WM8961_ADDITIONAL_CONTROL_4:
case WM8961_CLASS_D_CONTROL_1:
case WM8961_CLASS_D_CONTROL_2:
case WM8961_CLOCKING_4:
case WM8961_DSP_SIDETONE_0:
case WM8961_DSP_SIDETONE_1:
case WM8961_DC_SERVO_0:
case WM8961_DC_SERVO_1:
case WM8961_DC_SERVO_3:
case WM8961_DC_SERVO_5:
case WM8961_ANALOGUE_PGA_BIAS:
case WM8961_ANALOGUE_HP_0:
case WM8961_ANALOGUE_HP_2:
case WM8961_CHARGE_PUMP_1:
case WM8961_CHARGE_PUMP_B:
case WM8961_WRITE_SEQUENCER_1:
case WM8961_WRITE_SEQUENCER_2:
case WM8961_WRITE_SEQUENCER_3:
case WM8961_WRITE_SEQUENCER_4:
case WM8961_WRITE_SEQUENCER_5:
case WM8961_WRITE_SEQUENCER_6:
case WM8961_WRITE_SEQUENCER_7:
case WM8961_GENERAL_TEST_1:
return true;
default:
return false;
}
}
/*
* The headphone output supports special anti-pop sequences giving
* silent power up and power down.
*/
static int wm8961_hp_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
u16 hp_reg = snd_soc_read(codec, WM8961_ANALOGUE_HP_0);
u16 cp_reg = snd_soc_read(codec, WM8961_CHARGE_PUMP_1);
u16 pwr_reg = snd_soc_read(codec, WM8961_PWR_MGMT_2);
u16 dcs_reg = snd_soc_read(codec, WM8961_DC_SERVO_1);
int timeout = 500;
if (event & SND_SOC_DAPM_POST_PMU) {
/* Make sure the output is shorted */
hp_reg &= ~(WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT);
snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
/* Enable the charge pump */
cp_reg |= WM8961_CP_ENA;
snd_soc_write(codec, WM8961_CHARGE_PUMP_1, cp_reg);
mdelay(5);
/* Enable the PGA */
pwr_reg |= WM8961_LOUT1_PGA | WM8961_ROUT1_PGA;
snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg);
/* Enable the amplifier */
hp_reg |= WM8961_HPR_ENA | WM8961_HPL_ENA;
snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
/* Second stage enable */
hp_reg |= WM8961_HPR_ENA_DLY | WM8961_HPL_ENA_DLY;
snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
/* Enable the DC servo & trigger startup */
dcs_reg |=
WM8961_DCS_ENA_CHAN_HPR | WM8961_DCS_TRIG_STARTUP_HPR |
WM8961_DCS_ENA_CHAN_HPL | WM8961_DCS_TRIG_STARTUP_HPL;
dev_dbg(codec->dev, "Enabling DC servo\n");
snd_soc_write(codec, WM8961_DC_SERVO_1, dcs_reg);
do {
msleep(1);
dcs_reg = snd_soc_read(codec, WM8961_DC_SERVO_1);
} while (--timeout &&
dcs_reg & (WM8961_DCS_TRIG_STARTUP_HPR |
WM8961_DCS_TRIG_STARTUP_HPL));
if (dcs_reg & (WM8961_DCS_TRIG_STARTUP_HPR |
WM8961_DCS_TRIG_STARTUP_HPL))
dev_err(codec->dev, "DC servo timed out\n");
else
dev_dbg(codec->dev, "DC servo startup complete\n");
/* Enable the output stage */
hp_reg |= WM8961_HPR_ENA_OUTP | WM8961_HPL_ENA_OUTP;
snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
/* Remove the short on the output stage */
hp_reg |= WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT;
snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
}
if (event & SND_SOC_DAPM_PRE_PMD) {
/* Short the output */
hp_reg &= ~(WM8961_HPR_RMV_SHORT | WM8961_HPL_RMV_SHORT);
snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
/* Disable the output stage */
hp_reg &= ~(WM8961_HPR_ENA_OUTP | WM8961_HPL_ENA_OUTP);
snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
/* Disable DC offset cancellation */
dcs_reg &= ~(WM8961_DCS_ENA_CHAN_HPR |
WM8961_DCS_ENA_CHAN_HPL);
snd_soc_write(codec, WM8961_DC_SERVO_1, dcs_reg);
/* Finish up */
hp_reg &= ~(WM8961_HPR_ENA_DLY | WM8961_HPR_ENA |
WM8961_HPL_ENA_DLY | WM8961_HPL_ENA);
snd_soc_write(codec, WM8961_ANALOGUE_HP_0, hp_reg);
/* Disable the PGA */
pwr_reg &= ~(WM8961_LOUT1_PGA | WM8961_ROUT1_PGA);
snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg);
/* Disable the charge pump */
dev_dbg(codec->dev, "Disabling charge pump\n");
snd_soc_write(codec, WM8961_CHARGE_PUMP_1,
cp_reg & ~WM8961_CP_ENA);
}
return 0;
}
static int wm8961_spk_event(struct snd_soc_dapm_widget *w,
struct snd_kcontrol *kcontrol, int event)
{
struct snd_soc_codec *codec = snd_soc_dapm_to_codec(w->dapm);
u16 pwr_reg = snd_soc_read(codec, WM8961_PWR_MGMT_2);
u16 spk_reg = snd_soc_read(codec, WM8961_CLASS_D_CONTROL_1);
if (event & SND_SOC_DAPM_POST_PMU) {
/* Enable the PGA */
pwr_reg |= WM8961_SPKL_PGA | WM8961_SPKR_PGA;
snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg);
/* Enable the amplifier */
spk_reg |= WM8961_SPKL_ENA | WM8961_SPKR_ENA;
snd_soc_write(codec, WM8961_CLASS_D_CONTROL_1, spk_reg);
}
if (event & SND_SOC_DAPM_PRE_PMD) {
/* Disable the amplifier */
spk_reg &= ~(WM8961_SPKL_ENA | WM8961_SPKR_ENA);
snd_soc_write(codec, WM8961_CLASS_D_CONTROL_1, spk_reg);
/* Disable the PGA */
pwr_reg &= ~(WM8961_SPKL_PGA | WM8961_SPKR_PGA);
snd_soc_write(codec, WM8961_PWR_MGMT_2, pwr_reg);
}
return 0;
}
static const char *adc_hpf_text[] = {
"Hi-fi", "Voice 1", "Voice 2", "Voice 3",
};
static SOC_ENUM_SINGLE_DECL(adc_hpf,
WM8961_ADC_DAC_CONTROL_2, 7, adc_hpf_text);
static const char *dac_deemph_text[] = {
"None", "32kHz", "44.1kHz", "48kHz",
};
static SOC_ENUM_SINGLE_DECL(dac_deemph,
WM8961_ADC_DAC_CONTROL_1, 1, dac_deemph_text);
static const DECLARE_TLV_DB_SCALE(out_tlv, -12100, 100, 1);
static const DECLARE_TLV_DB_SCALE(hp_sec_tlv, -700, 100, 0);
static const DECLARE_TLV_DB_SCALE(adc_tlv, -7200, 75, 1);
static const DECLARE_TLV_DB_SCALE(sidetone_tlv, -3600, 300, 0);
static const DECLARE_TLV_DB_RANGE(boost_tlv,
0, 0, TLV_DB_SCALE_ITEM(0, 0, 0),
1, 1, TLV_DB_SCALE_ITEM(13, 0, 0),
2, 2, TLV_DB_SCALE_ITEM(20, 0, 0),
3, 3, TLV_DB_SCALE_ITEM(29, 0, 0)
);
static const DECLARE_TLV_DB_SCALE(pga_tlv, -2325, 75, 0);
static const struct snd_kcontrol_new wm8961_snd_controls[] = {
SOC_DOUBLE_R_TLV("Headphone Volume", WM8961_LOUT1_VOLUME, WM8961_ROUT1_VOLUME,
0, 127, 0, out_tlv),
SOC_DOUBLE_TLV("Headphone Secondary Volume", WM8961_ANALOGUE_HP_2,
6, 3, 7, 0, hp_sec_tlv),
SOC_DOUBLE_R("Headphone ZC Switch", WM8961_LOUT1_VOLUME, WM8961_ROUT1_VOLUME,
7, 1, 0),
SOC_DOUBLE_R_TLV("Speaker Volume", WM8961_LOUT2_VOLUME, WM8961_ROUT2_VOLUME,
0, 127, 0, out_tlv),
SOC_DOUBLE_R("Speaker ZC Switch", WM8961_LOUT2_VOLUME, WM8961_ROUT2_VOLUME,
7, 1, 0),
SOC_SINGLE("Speaker AC Gain", WM8961_CLASS_D_CONTROL_2, 0, 7, 0),
SOC_SINGLE("DAC x128 OSR Switch", WM8961_ADC_DAC_CONTROL_2, 0, 1, 0),
SOC_ENUM("DAC Deemphasis", dac_deemph),
SOC_SINGLE("DAC Soft Mute Switch", WM8961_ADC_DAC_CONTROL_2, 3, 1, 0),
SOC_DOUBLE_R_TLV("Sidetone Volume", WM8961_DSP_SIDETONE_0,
WM8961_DSP_SIDETONE_1, 4, 12, 0, sidetone_tlv),
SOC_SINGLE("ADC High Pass Filter Switch", WM8961_ADC_DAC_CONTROL_1, 0, 1, 0),
SOC_ENUM("ADC High Pass Filter Mode", adc_hpf),
SOC_DOUBLE_R_TLV("Capture Volume",
WM8961_LEFT_ADC_VOLUME, WM8961_RIGHT_ADC_VOLUME,
1, 119, 0, adc_tlv),
SOC_DOUBLE_R_TLV("Capture Boost Volume",
WM8961_ADCL_SIGNAL_PATH, WM8961_ADCR_SIGNAL_PATH,
4, 3, 0, boost_tlv),
SOC_DOUBLE_R_TLV("Capture PGA Volume",
WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME,
0, 62, 0, pga_tlv),
SOC_DOUBLE_R("Capture PGA ZC Switch",
WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME,
6, 1, 1),
SOC_DOUBLE_R("Capture PGA Switch",
WM8961_LEFT_INPUT_VOLUME, WM8961_RIGHT_INPUT_VOLUME,
7, 1, 1),
};
static const char *sidetone_text[] = {
"None", "Left", "Right"
};
static SOC_ENUM_SINGLE_DECL(dacl_sidetone,
WM8961_DSP_SIDETONE_0, 2, sidetone_text);
static SOC_ENUM_SINGLE_DECL(dacr_sidetone,
WM8961_DSP_SIDETONE_1, 2, sidetone_text);
static const struct snd_kcontrol_new dacl_mux =
SOC_DAPM_ENUM("DACL Sidetone", dacl_sidetone);
static const struct snd_kcontrol_new dacr_mux =
SOC_DAPM_ENUM("DACR Sidetone", dacr_sidetone);
static const struct snd_soc_dapm_widget wm8961_dapm_widgets[] = {
SND_SOC_DAPM_INPUT("LINPUT"),
SND_SOC_DAPM_INPUT("RINPUT"),
SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8961_CLOCKING2, 4, 0, NULL, 0),
SND_SOC_DAPM_PGA("Left Input", WM8961_PWR_MGMT_1, 5, 0, NULL, 0),
SND_SOC_DAPM_PGA("Right Input", WM8961_PWR_MGMT_1, 4, 0, NULL, 0),
SND_SOC_DAPM_ADC("ADCL", "HiFi Capture", WM8961_PWR_MGMT_1, 3, 0),
SND_SOC_DAPM_ADC("ADCR", "HiFi Capture", WM8961_PWR_MGMT_1, 2, 0),
SND_SOC_DAPM_SUPPLY("MICBIAS", WM8961_PWR_MGMT_1, 1, 0, NULL, 0),
SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &dacl_mux),
SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &dacr_mux),
SND_SOC_DAPM_DAC("DACL", "HiFi Playback", WM8961_PWR_MGMT_2, 8, 0),
SND_SOC_DAPM_DAC("DACR", "HiFi Playback", WM8961_PWR_MGMT_2, 7, 0),
/* Handle as a mono path for DCS */
SND_SOC_DAPM_PGA_E("Headphone Output", SND_SOC_NOPM,
4, 0, NULL, 0, wm8961_hp_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_PGA_E("Speaker Output", SND_SOC_NOPM,
4, 0, NULL, 0, wm8961_spk_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
SND_SOC_DAPM_OUTPUT("HP_L"),
SND_SOC_DAPM_OUTPUT("HP_R"),
SND_SOC_DAPM_OUTPUT("SPK_LN"),
SND_SOC_DAPM_OUTPUT("SPK_LP"),
SND_SOC_DAPM_OUTPUT("SPK_RN"),
SND_SOC_DAPM_OUTPUT("SPK_RP"),
};
static const struct snd_soc_dapm_route audio_paths[] = {
{ "DACL", NULL, "CLK_DSP" },
{ "DACL", NULL, "DACL Sidetone" },
{ "DACR", NULL, "CLK_DSP" },
{ "DACR", NULL, "DACR Sidetone" },
{ "DACL Sidetone", "Left", "ADCL" },
{ "DACL Sidetone", "Right", "ADCR" },
{ "DACR Sidetone", "Left", "ADCL" },
{ "DACR Sidetone", "Right", "ADCR" },
{ "HP_L", NULL, "Headphone Output" },
{ "HP_R", NULL, "Headphone Output" },
{ "Headphone Output", NULL, "DACL" },
{ "Headphone Output", NULL, "DACR" },
{ "SPK_LN", NULL, "Speaker Output" },
{ "SPK_LP", NULL, "Speaker Output" },
{ "SPK_RN", NULL, "Speaker Output" },
{ "SPK_RP", NULL, "Speaker Output" },
{ "Speaker Output", NULL, "DACL" },
{ "Speaker Output", NULL, "DACR" },
{ "ADCL", NULL, "Left Input" },
{ "ADCL", NULL, "CLK_DSP" },
{ "ADCR", NULL, "Right Input" },
{ "ADCR", NULL, "CLK_DSP" },
{ "Left Input", NULL, "LINPUT" },
{ "Right Input", NULL, "RINPUT" },
};
/* Values for CLK_SYS_RATE */
static struct {
int ratio;
u16 val;
} wm8961_clk_sys_ratio[] = {
{ 64, 0 },
{ 128, 1 },
{ 192, 2 },
{ 256, 3 },
{ 384, 4 },
{ 512, 5 },
{ 768, 6 },
{ 1024, 7 },
{ 1408, 8 },
{ 1536, 9 },
};
/* Values for SAMPLE_RATE */
static struct {
int rate;
u16 val;
} wm8961_srate[] = {
{ 48000, 0 },
{ 44100, 0 },
{ 32000, 1 },
{ 22050, 2 },
{ 24000, 2 },
{ 16000, 3 },
{ 11250, 4 },
{ 12000, 4 },
{ 8000, 5 },
};
static int wm8961_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params,
struct snd_soc_dai *dai)
{
struct snd_soc_codec *codec = dai->codec;
struct wm8961_priv *wm8961 = snd_soc_codec_get_drvdata(codec);
int i, best, target, fs;
u16 reg;
fs = params_rate(params);
if (!wm8961->sysclk) {
dev_err(codec->dev, "MCLK has not been specified\n");
return -EINVAL;
}
/* Find the closest sample rate for the filters */
best = 0;
for (i = 0; i < ARRAY_SIZE(wm8961_srate); i++) {
if (abs(wm8961_srate[i].rate - fs) <
abs(wm8961_srate[best].rate - fs))
best = i;
}
reg = snd_soc_read(codec, WM8961_ADDITIONAL_CONTROL_3);
reg &= ~WM8961_SAMPLE_RATE_MASK;
reg |= wm8961_srate[best].val;
snd_soc_write(codec, WM8961_ADDITIONAL_CONTROL_3, reg);
dev_dbg(codec->dev, "Selected SRATE %dHz for %dHz\n",
wm8961_srate[best].rate, fs);
/* Select a CLK_SYS/fs ratio equal to or higher than required */
target = wm8961->sysclk / fs;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && target < 64) {
dev_err(codec->dev,
"SYSCLK must be at least 64*fs for DAC\n");
return -EINVAL;
}
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE && target < 256) {
dev_err(codec->dev,
"SYSCLK must be at least 256*fs for ADC\n");
return -EINVAL;
}
for (i = 0; i < ARRAY_SIZE(wm8961_clk_sys_ratio); i++) {
if (wm8961_clk_sys_ratio[i].ratio >= target)
break;
}
if (i == ARRAY_SIZE(wm8961_clk_sys_ratio)) {
dev_err(codec->dev, "Unable to generate CLK_SYS_RATE\n");
return -EINVAL;
}
dev_dbg(codec->dev, "Selected CLK_SYS_RATE of %d for %d/%d=%d\n",
wm8961_clk_sys_ratio[i].ratio, wm8961->sysclk, fs,
wm8961->sysclk / fs);
reg = snd_soc_read(codec, WM8961_CLOCKING_4);
reg &= ~WM8961_CLK_SYS_RATE_MASK;
reg |= wm8961_clk_sys_ratio[i].val << WM8961_CLK_SYS_RATE_SHIFT;
snd_soc_write(codec, WM8961_CLOCKING_4, reg);
reg = snd_soc_read(codec, WM8961_AUDIO_INTERFACE_0);
reg &= ~WM8961_WL_MASK;
switch (params_width(params)) {
case 16:
break;
case 20:
reg |= 1 << WM8961_WL_SHIFT;
break;
case 24:
reg |= 2 << WM8961_WL_SHIFT;
break;
case 32:
reg |= 3 << WM8961_WL_SHIFT;
break;
default:
return -EINVAL;
}
snd_soc_write(codec, WM8961_AUDIO_INTERFACE_0, reg);
/* Sloping stop-band filter is recommended for <= 24kHz */
reg = snd_soc_read(codec, WM8961_ADC_DAC_CONTROL_2);
if (fs <= 24000)
reg |= WM8961_DACSLOPE;
else
reg &= ~WM8961_DACSLOPE;
snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_2, reg);
return 0;
}
static int wm8961_set_sysclk(struct snd_soc_dai *dai, int clk_id,
unsigned int freq,
int dir)
{
struct snd_soc_codec *codec = dai->codec;
struct wm8961_priv *wm8961 = snd_soc_codec_get_drvdata(codec);
u16 reg = snd_soc_read(codec, WM8961_CLOCKING1);
if (freq > 33000000) {
dev_err(codec->dev, "MCLK must be <33MHz\n");
return -EINVAL;
}
if (freq > 16500000) {
dev_dbg(codec->dev, "Using MCLK/2 for %dHz MCLK\n", freq);
reg |= WM8961_MCLKDIV;
freq /= 2;
} else {
dev_dbg(codec->dev, "Using MCLK/1 for %dHz MCLK\n", freq);
reg &= ~WM8961_MCLKDIV;
}
snd_soc_write(codec, WM8961_CLOCKING1, reg);
wm8961->sysclk = freq;
return 0;
}
static int wm8961_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
{
struct snd_soc_codec *codec = dai->codec;
u16 aif = snd_soc_read(codec, WM8961_AUDIO_INTERFACE_0);
aif &= ~(WM8961_BCLKINV | WM8961_LRP |
WM8961_MS | WM8961_FORMAT_MASK);
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
case SND_SOC_DAIFMT_CBM_CFM:
aif |= WM8961_MS;
break;
case SND_SOC_DAIFMT_CBS_CFS:
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_RIGHT_J:
break;
case SND_SOC_DAIFMT_LEFT_J:
aif |= 1;
break;
case SND_SOC_DAIFMT_I2S:
aif |= 2;
break;
case SND_SOC_DAIFMT_DSP_B:
aif |= WM8961_LRP;
case SND_SOC_DAIFMT_DSP_A:
aif |= 3;
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
case SND_SOC_DAIFMT_IB_NF:
break;
default:
return -EINVAL;
}
break;
default:
return -EINVAL;
}
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_NB_NF:
break;
case SND_SOC_DAIFMT_NB_IF:
aif |= WM8961_LRP;
break;
case SND_SOC_DAIFMT_IB_NF:
aif |= WM8961_BCLKINV;
break;
case SND_SOC_DAIFMT_IB_IF:
aif |= WM8961_BCLKINV | WM8961_LRP;
break;
default:
return -EINVAL;
}
return snd_soc_write(codec, WM8961_AUDIO_INTERFACE_0, aif);
}
static int wm8961_set_tristate(struct snd_soc_dai *dai, int tristate)
{
struct snd_soc_codec *codec = dai->codec;
u16 reg = snd_soc_read(codec, WM8961_ADDITIONAL_CONTROL_2);
if (tristate)
reg |= WM8961_TRIS;
else
reg &= ~WM8961_TRIS;
return snd_soc_write(codec, WM8961_ADDITIONAL_CONTROL_2, reg);
}
static int wm8961_digital_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
u16 reg = snd_soc_read(codec, WM8961_ADC_DAC_CONTROL_1);
if (mute)
reg |= WM8961_DACMU;
else
reg &= ~WM8961_DACMU;
msleep(17);
return snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_1, reg);
}
static int wm8961_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div)
{
struct snd_soc_codec *codec = dai->codec;
u16 reg;
switch (div_id) {
case WM8961_BCLK:
reg = snd_soc_read(codec, WM8961_CLOCKING2);
reg &= ~WM8961_BCLKDIV_MASK;
reg |= div;
snd_soc_write(codec, WM8961_CLOCKING2, reg);
break;
case WM8961_LRCLK:
reg = snd_soc_read(codec, WM8961_AUDIO_INTERFACE_2);
reg &= ~WM8961_LRCLK_RATE_MASK;
reg |= div;
snd_soc_write(codec, WM8961_AUDIO_INTERFACE_2, reg);
break;
default:
return -EINVAL;
}
return 0;
}
static int wm8961_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
{
u16 reg;
/* This is all slightly unusual since we have no bypass paths
* and the output amplifier structure means we can just slam
* the biases straight up rather than having to ramp them
* slowly.
*/
switch (level) {
case SND_SOC_BIAS_ON:
break;
case SND_SOC_BIAS_PREPARE:
if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_STANDBY) {
/* Enable bias generation */
reg = snd_soc_read(codec, WM8961_ANTI_POP);
reg |= WM8961_BUFIOEN | WM8961_BUFDCOPEN;
snd_soc_write(codec, WM8961_ANTI_POP, reg);
/* VMID=2*50k, VREF */
reg = snd_soc_read(codec, WM8961_PWR_MGMT_1);
reg &= ~WM8961_VMIDSEL_MASK;
reg |= (1 << WM8961_VMIDSEL_SHIFT) | WM8961_VREF;
snd_soc_write(codec, WM8961_PWR_MGMT_1, reg);
}
break;
case SND_SOC_BIAS_STANDBY:
if (snd_soc_codec_get_bias_level(codec) == SND_SOC_BIAS_PREPARE) {
/* VREF off */
reg = snd_soc_read(codec, WM8961_PWR_MGMT_1);
reg &= ~WM8961_VREF;
snd_soc_write(codec, WM8961_PWR_MGMT_1, reg);
/* Bias generation off */
reg = snd_soc_read(codec, WM8961_ANTI_POP);
reg &= ~(WM8961_BUFIOEN | WM8961_BUFDCOPEN);
snd_soc_write(codec, WM8961_ANTI_POP, reg);
/* VMID off */
reg = snd_soc_read(codec, WM8961_PWR_MGMT_1);
reg &= ~WM8961_VMIDSEL_MASK;
snd_soc_write(codec, WM8961_PWR_MGMT_1, reg);
}
break;
case SND_SOC_BIAS_OFF:
break;
}
return 0;
}
#define WM8961_RATES SNDRV_PCM_RATE_8000_48000
#define WM8961_FORMATS \
(SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S20_3LE | \
SNDRV_PCM_FMTBIT_S24_LE)
static const struct snd_soc_dai_ops wm8961_dai_ops = {
.hw_params = wm8961_hw_params,
.set_sysclk = wm8961_set_sysclk,
.set_fmt = wm8961_set_fmt,
.digital_mute = wm8961_digital_mute,
.set_tristate = wm8961_set_tristate,
.set_clkdiv = wm8961_set_clkdiv,
};
static struct snd_soc_dai_driver wm8961_dai = {
.name = "wm8961-hifi",
.playback = {
.stream_name = "HiFi Playback",
.channels_min = 1,
.channels_max = 2,
.rates = WM8961_RATES,
.formats = WM8961_FORMATS,},
.capture = {
.stream_name = "HiFi Capture",
.channels_min = 1,
.channels_max = 2,
.rates = WM8961_RATES,
.formats = WM8961_FORMATS,},
.ops = &wm8961_dai_ops,
};
static int wm8961_probe(struct snd_soc_codec *codec)
{
u16 reg;
/* Enable class W */
reg = snd_soc_read(codec, WM8961_CHARGE_PUMP_B);
reg |= WM8961_CP_DYN_PWR_MASK;
snd_soc_write(codec, WM8961_CHARGE_PUMP_B, reg);
/* Latch volume update bits (right channel only, we always
* write both out) and default ZC on. */
reg = snd_soc_read(codec, WM8961_ROUT1_VOLUME);
snd_soc_write(codec, WM8961_ROUT1_VOLUME,
reg | WM8961_LO1ZC | WM8961_OUT1VU);
snd_soc_write(codec, WM8961_LOUT1_VOLUME, reg | WM8961_LO1ZC);
reg = snd_soc_read(codec, WM8961_ROUT2_VOLUME);
snd_soc_write(codec, WM8961_ROUT2_VOLUME,
reg | WM8961_SPKRZC | WM8961_SPKVU);
snd_soc_write(codec, WM8961_LOUT2_VOLUME, reg | WM8961_SPKLZC);
reg = snd_soc_read(codec, WM8961_RIGHT_ADC_VOLUME);
snd_soc_write(codec, WM8961_RIGHT_ADC_VOLUME, reg | WM8961_ADCVU);
reg = snd_soc_read(codec, WM8961_RIGHT_INPUT_VOLUME);
snd_soc_write(codec, WM8961_RIGHT_INPUT_VOLUME, reg | WM8961_IPVU);
/* Use soft mute by default */
reg = snd_soc_read(codec, WM8961_ADC_DAC_CONTROL_2);
reg |= WM8961_DACSMM;
snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_2, reg);
/* Use automatic clocking mode by default; for now this is all
* we support.
*/
reg = snd_soc_read(codec, WM8961_CLOCKING_3);
reg &= ~WM8961_MANUAL_MODE;
snd_soc_write(codec, WM8961_CLOCKING_3, reg);
return 0;
}
#ifdef CONFIG_PM
static int wm8961_resume(struct snd_soc_codec *codec)
{
snd_soc_cache_sync(codec);
return 0;
}
#else
#define wm8961_resume NULL
#endif
static struct snd_soc_codec_driver soc_codec_dev_wm8961 = {
.probe = wm8961_probe,
.resume = wm8961_resume,
.set_bias_level = wm8961_set_bias_level,
.suspend_bias_off = true,
.controls = wm8961_snd_controls,
.num_controls = ARRAY_SIZE(wm8961_snd_controls),
.dapm_widgets = wm8961_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(wm8961_dapm_widgets),
.dapm_routes = audio_paths,
.num_dapm_routes = ARRAY_SIZE(audio_paths),
};
static const struct regmap_config wm8961_regmap = {
.reg_bits = 8,
.val_bits = 16,
.max_register = WM8961_MAX_REGISTER,
.reg_defaults = wm8961_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(wm8961_reg_defaults),
.cache_type = REGCACHE_RBTREE,
.volatile_reg = wm8961_volatile,
.readable_reg = wm8961_readable,
};
static int wm8961_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct wm8961_priv *wm8961;
unsigned int val;
int ret;
wm8961 = devm_kzalloc(&i2c->dev, sizeof(struct wm8961_priv),
GFP_KERNEL);
if (wm8961 == NULL)
return -ENOMEM;
wm8961->regmap = devm_regmap_init_i2c(i2c, &wm8961_regmap);
if (IS_ERR(wm8961->regmap))
return PTR_ERR(wm8961->regmap);
ret = regmap_read(wm8961->regmap, WM8961_SOFTWARE_RESET, &val);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret);
return ret;
}
if (val != 0x1801) {
dev_err(&i2c->dev, "Device is not a WM8961: ID=0x%x\n", val);
return -EINVAL;
}
/* This isn't volatile - readback doesn't correspond to write */
regcache_cache_bypass(wm8961->regmap, true);
ret = regmap_read(wm8961->regmap, WM8961_RIGHT_INPUT_VOLUME, &val);
regcache_cache_bypass(wm8961->regmap, false);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to read chip revision: %d\n", ret);
return ret;
}
dev_info(&i2c->dev, "WM8961 family %d revision %c\n",
(val & WM8961_DEVICE_ID_MASK) >> WM8961_DEVICE_ID_SHIFT,
((val & WM8961_CHIP_REV_MASK) >> WM8961_CHIP_REV_SHIFT)
+ 'A');
ret = regmap_write(wm8961->regmap, WM8961_SOFTWARE_RESET, 0x1801);
if (ret != 0) {
dev_err(&i2c->dev, "Failed to issue reset: %d\n", ret);
return ret;
}
i2c_set_clientdata(i2c, wm8961);
ret = snd_soc_register_codec(&i2c->dev,
&soc_codec_dev_wm8961, &wm8961_dai, 1);
return ret;
}
static int wm8961_i2c_remove(struct i2c_client *client)
{
snd_soc_unregister_codec(&client->dev);
return 0;
}
static const struct i2c_device_id wm8961_i2c_id[] = {
{ "wm8961", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, wm8961_i2c_id);
static struct i2c_driver wm8961_i2c_driver = {
.driver = {
.name = "wm8961",
},
.probe = wm8961_i2c_probe,
.remove = wm8961_i2c_remove,
.id_table = wm8961_i2c_id,
};
module_i2c_driver(wm8961_i2c_driver);
MODULE_DESCRIPTION("ASoC WM8961 driver");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_LICENSE("GPL");