/* cfg80211 support * * See copyright notice in main.c */ #include <linux/ieee80211.h> #include <net/cfg80211.h> #include "hw.h" #include "main.h" #include "orinoco.h" #include "cfg.h" /* Supported bitrates. Must agree with hw.c */ static struct ieee80211_rate orinoco_rates[] = { { .bitrate = 10 }, { .bitrate = 20 }, { .bitrate = 55 }, { .bitrate = 110 }, }; static const void * const orinoco_wiphy_privid = &orinoco_wiphy_privid; /* Called after orinoco_private is allocated. */ void orinoco_wiphy_init(struct wiphy *wiphy) { struct orinoco_private *priv = wiphy_priv(wiphy); wiphy->privid = orinoco_wiphy_privid; set_wiphy_dev(wiphy, priv->dev); } /* Called after firmware is initialised */ int orinoco_wiphy_register(struct wiphy *wiphy) { struct orinoco_private *priv = wiphy_priv(wiphy); int i, channels = 0; if (priv->firmware_type == FIRMWARE_TYPE_AGERE) wiphy->max_scan_ssids = 1; else wiphy->max_scan_ssids = 0; wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION); /* TODO: should we set if we only have demo ad-hoc? * (priv->has_port3) */ if (priv->has_ibss) wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC); if (!priv->broken_monitor || force_monitor) wiphy->interface_modes |= BIT(NL80211_IFTYPE_MONITOR); priv->band.bitrates = orinoco_rates; priv->band.n_bitrates = ARRAY_SIZE(orinoco_rates); /* Only support channels allowed by the card EEPROM */ for (i = 0; i < NUM_CHANNELS; i++) { if (priv->channel_mask & (1 << i)) { priv->channels[i].center_freq = ieee80211_channel_to_frequency(i + 1, IEEE80211_BAND_2GHZ); channels++; } } priv->band.channels = priv->channels; priv->band.n_channels = channels; wiphy->bands[IEEE80211_BAND_2GHZ] = &priv->band; wiphy->signal_type = CFG80211_SIGNAL_TYPE_MBM; i = 0; if (priv->has_wep) { priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP40; i++; if (priv->has_big_wep) { priv->cipher_suites[i] = WLAN_CIPHER_SUITE_WEP104; i++; } } if (priv->has_wpa) { priv->cipher_suites[i] = WLAN_CIPHER_SUITE_TKIP; i++; } wiphy->cipher_suites = priv->cipher_suites; wiphy->n_cipher_suites = i; wiphy->rts_threshold = priv->rts_thresh; if (!priv->has_mwo) wiphy->frag_threshold = priv->frag_thresh + 1; wiphy->retry_short = priv->short_retry_limit; wiphy->retry_long = priv->long_retry_limit; return wiphy_register(wiphy); } static int orinoco_change_vif(struct wiphy *wiphy, struct net_device *dev, enum nl80211_iftype type, u32 *flags, struct vif_params *params) { struct orinoco_private *priv = wiphy_priv(wiphy); int err = 0; unsigned long lock; if (orinoco_lock(priv, &lock) != 0) return -EBUSY; switch (type) { case NL80211_IFTYPE_ADHOC: if (!priv->has_ibss && !priv->has_port3) err = -EINVAL; break; case NL80211_IFTYPE_STATION: break; case NL80211_IFTYPE_MONITOR: if (priv->broken_monitor && !force_monitor) { wiphy_warn(wiphy, "Monitor mode support is buggy in this firmware, not enabling\n"); err = -EINVAL; } break; default: err = -EINVAL; } if (!err) { priv->iw_mode = type; set_port_type(priv); err = orinoco_commit(priv); } orinoco_unlock(priv, &lock); return err; } static int orinoco_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request) { struct orinoco_private *priv = wiphy_priv(wiphy); int err; if (!request) return -EINVAL; if (priv->scan_request && priv->scan_request != request) return -EBUSY; priv->scan_request = request; err = orinoco_hw_trigger_scan(priv, request->ssids); /* On error the we aren't processing the request */ if (err) priv->scan_request = NULL; return err; } static int orinoco_set_monitor_channel(struct wiphy *wiphy, struct cfg80211_chan_def *chandef) { struct orinoco_private *priv = wiphy_priv(wiphy); int err = 0; unsigned long flags; int channel; if (!chandef->chan) return -EINVAL; if (cfg80211_get_chandef_type(chandef) != NL80211_CHAN_NO_HT) return -EINVAL; if (chandef->chan->band != IEEE80211_BAND_2GHZ) return -EINVAL; channel = ieee80211_frequency_to_channel(chandef->chan->center_freq); if ((channel < 1) || (channel > NUM_CHANNELS) || !(priv->channel_mask & (1 << (channel - 1)))) return -EINVAL; if (orinoco_lock(priv, &flags) != 0) return -EBUSY; priv->channel = channel; if (priv->iw_mode == NL80211_IFTYPE_MONITOR) { /* Fast channel change - no commit if successful */ struct hermes *hw = &priv->hw; err = hw->ops->cmd_wait(hw, HERMES_CMD_TEST | HERMES_TEST_SET_CHANNEL, channel, NULL); } orinoco_unlock(priv, &flags); return err; } static int orinoco_set_wiphy_params(struct wiphy *wiphy, u32 changed) { struct orinoco_private *priv = wiphy_priv(wiphy); int frag_value = -1; int rts_value = -1; int err = 0; if (changed & WIPHY_PARAM_RETRY_SHORT) { /* Setting short retry not supported */ err = -EINVAL; } if (changed & WIPHY_PARAM_RETRY_LONG) { /* Setting long retry not supported */ err = -EINVAL; } if (changed & WIPHY_PARAM_FRAG_THRESHOLD) { /* Set fragmentation */ if (priv->has_mwo) { if (wiphy->frag_threshold == -1) frag_value = 0; else { printk(KERN_WARNING "%s: Fixed fragmentation " "is not supported on this firmware. " "Using MWO robust instead.\n", priv->ndev->name); frag_value = 1; } } else { if (wiphy->frag_threshold == -1) frag_value = 2346; else if ((wiphy->frag_threshold < 257) || (wiphy->frag_threshold > 2347)) err = -EINVAL; else /* cfg80211 value is 257-2347 (odd only) * orinoco rid has range 256-2346 (even only) */ frag_value = wiphy->frag_threshold & ~0x1; } } if (changed & WIPHY_PARAM_RTS_THRESHOLD) { /* Set RTS. * * Prism documentation suggests default of 2432, * and a range of 0-3000. * * Current implementation uses 2347 as the default and * the upper limit. */ if (wiphy->rts_threshold == -1) rts_value = 2347; else if (wiphy->rts_threshold > 2347) err = -EINVAL; else rts_value = wiphy->rts_threshold; } if (!err) { unsigned long flags; if (orinoco_lock(priv, &flags) != 0) return -EBUSY; if (frag_value >= 0) { if (priv->has_mwo) priv->mwo_robust = frag_value; else priv->frag_thresh = frag_value; } if (rts_value >= 0) priv->rts_thresh = rts_value; err = orinoco_commit(priv); orinoco_unlock(priv, &flags); } return err; } const struct cfg80211_ops orinoco_cfg_ops = { .change_virtual_intf = orinoco_change_vif, .set_monitor_channel = orinoco_set_monitor_channel, .scan = orinoco_scan, .set_wiphy_params = orinoco_set_wiphy_params, };