/*
* linux/drivers/mmc/sdio.c
*
* Copyright 2006-2007 Pierre Ossman
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#include <linux/err.h>
#include <linux/module.h>
#include <linux/pm_runtime.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/sdio.h>
#include <linux/mmc/sdio_func.h>
#include <linux/mmc/sdio_ids.h>
#include "core.h"
#include "bus.h"
#include "host.h"
#include "sd.h"
#include "sdio_bus.h"
#include "mmc_ops.h"
#include "sd_ops.h"
#include "sdio_ops.h"
#include "sdio_cis.h"
#ifdef CONFIG_MMC_EMBEDDED_SDIO
#include <linux/mmc/sdio_ids.h>
#endif
static int sdio_read_fbr(struct sdio_func *func)
{
int ret;
unsigned char data;
if (mmc_card_nonstd_func_interface(func->card)) {
func->class = SDIO_CLASS_NONE;
return 0;
}
ret = mmc_io_rw_direct(func->card, 0, 0,
SDIO_FBR_BASE(func->num) + SDIO_FBR_STD_IF, 0, &data);
if (ret)
goto out;
data &= 0x0f;
if (data == 0x0f) {
ret = mmc_io_rw_direct(func->card, 0, 0,
SDIO_FBR_BASE(func->num) + SDIO_FBR_STD_IF_EXT, 0, &data);
if (ret)
goto out;
}
func->class = data;
out:
return ret;
}
static int sdio_init_func(struct mmc_card *card, unsigned int fn)
{
int ret;
struct sdio_func *func;
BUG_ON(fn > SDIO_MAX_FUNCS);
func = sdio_alloc_func(card);
if (IS_ERR(func))
return PTR_ERR(func);
func->num = fn;
if (!(card->quirks & MMC_QUIRK_NONSTD_SDIO)) {
ret = sdio_read_fbr(func);
if (ret)
goto fail;
ret = sdio_read_func_cis(func);
if (ret)
goto fail;
} else {
func->vendor = func->card->cis.vendor;
func->device = func->card->cis.device;
func->max_blksize = func->card->cis.blksize;
}
card->sdio_func[fn - 1] = func;
return 0;
fail:
/*
* It is okay to remove the function here even though we hold
* the host lock as we haven't registered the device yet.
*/
sdio_remove_func(func);
return ret;
}
static int sdio_read_cccr(struct mmc_card *card, u32 ocr)
{
int ret;
int cccr_vsn;
int uhs = ocr & R4_18V_PRESENT;
unsigned char data;
unsigned char speed;
memset(&card->cccr, 0, sizeof(struct sdio_cccr));
ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_CCCR, 0, &data);
if (ret)
goto out;
cccr_vsn = data & 0x0f;
if (cccr_vsn > SDIO_CCCR_REV_3_00) {
pr_err("%s: unrecognised CCCR structure version %d\n",
mmc_hostname(card->host), cccr_vsn);
return -EINVAL;
}
card->cccr.sdio_vsn = (data & 0xf0) >> 4;
ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_CAPS, 0, &data);
if (ret)
goto out;
if (data & SDIO_CCCR_CAP_SMB)
card->cccr.multi_block = 1;
if (data & SDIO_CCCR_CAP_LSC)
card->cccr.low_speed = 1;
if (data & SDIO_CCCR_CAP_4BLS)
card->cccr.wide_bus = 1;
if (cccr_vsn >= SDIO_CCCR_REV_1_10) {
ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_POWER, 0, &data);
if (ret)
goto out;
if (data & SDIO_POWER_SMPC)
card->cccr.high_power = 1;
}
if (cccr_vsn >= SDIO_CCCR_REV_1_20) {
ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed);
if (ret)
goto out;
card->scr.sda_spec3 = 0;
card->sw_caps.sd3_bus_mode = 0;
card->sw_caps.sd3_drv_type = 0;
if (cccr_vsn >= SDIO_CCCR_REV_3_00 && uhs) {
card->scr.sda_spec3 = 1;
ret = mmc_io_rw_direct(card, 0, 0,
SDIO_CCCR_UHS, 0, &data);
if (ret)
goto out;
if (mmc_host_uhs(card->host)) {
if (data & SDIO_UHS_DDR50)
card->sw_caps.sd3_bus_mode
|= SD_MODE_UHS_DDR50;
if (data & SDIO_UHS_SDR50)
card->sw_caps.sd3_bus_mode
|= SD_MODE_UHS_SDR50;
if (data & SDIO_UHS_SDR104)
card->sw_caps.sd3_bus_mode
|= SD_MODE_UHS_SDR104;
}
ret = mmc_io_rw_direct(card, 0, 0,
SDIO_CCCR_DRIVE_STRENGTH, 0, &data);
if (ret)
goto out;
if (data & SDIO_DRIVE_SDTA)
card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_A;
if (data & SDIO_DRIVE_SDTC)
card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_C;
if (data & SDIO_DRIVE_SDTD)
card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_D;
}
/* if no uhs mode ensure we check for high speed */
if (!card->sw_caps.sd3_bus_mode) {
if (speed & SDIO_SPEED_SHS) {
card->cccr.high_speed = 1;
card->sw_caps.hs_max_dtr = 50000000;
} else {
card->cccr.high_speed = 0;
card->sw_caps.hs_max_dtr = 25000000;
}
}
}
out:
return ret;
}
static int sdio_enable_wide(struct mmc_card *card)
{
int ret;
u8 ctrl;
if (!(card->host->caps & MMC_CAP_4_BIT_DATA))
return 0;
if (card->cccr.low_speed && !card->cccr.wide_bus)
return 0;
ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
if (ret)
return ret;
if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED)
pr_warn("%s: SDIO_CCCR_IF is invalid: 0x%02x\n",
mmc_hostname(card->host), ctrl);
/* set as 4-bit bus width */
ctrl &= ~SDIO_BUS_WIDTH_MASK;
ctrl |= SDIO_BUS_WIDTH_4BIT;
ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
if (ret)
return ret;
return 1;
}
/*
* If desired, disconnect the pull-up resistor on CD/DAT[3] (pin 1)
* of the card. This may be required on certain setups of boards,
* controllers and embedded sdio device which do not need the card's
* pull-up. As a result, card detection is disabled and power is saved.
*/
static int sdio_disable_cd(struct mmc_card *card)
{
int ret;
u8 ctrl;
if (!mmc_card_disable_cd(card))
return 0;
ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
if (ret)
return ret;
ctrl |= SDIO_BUS_CD_DISABLE;
return mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
}
/*
* Devices that remain active during a system suspend are
* put back into 1-bit mode.
*/
static int sdio_disable_wide(struct mmc_card *card)
{
int ret;
u8 ctrl;
if (!(card->host->caps & MMC_CAP_4_BIT_DATA))
return 0;
if (card->cccr.low_speed && !card->cccr.wide_bus)
return 0;
ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
if (ret)
return ret;
if (!(ctrl & SDIO_BUS_WIDTH_4BIT))
return 0;
ctrl &= ~SDIO_BUS_WIDTH_4BIT;
ctrl |= SDIO_BUS_ASYNC_INT;
ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
if (ret)
return ret;
mmc_set_bus_width(card->host, MMC_BUS_WIDTH_1);
return 0;
}
static int sdio_enable_4bit_bus(struct mmc_card *card)
{
int err;
if (card->type == MMC_TYPE_SDIO)
err = sdio_enable_wide(card);
else if ((card->host->caps & MMC_CAP_4_BIT_DATA) &&
(card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) {
err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4);
if (err)
return err;
err = sdio_enable_wide(card);
if (err <= 0)
mmc_app_set_bus_width(card, MMC_BUS_WIDTH_1);
} else
return 0;
if (err > 0) {
mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
err = 0;
}
return err;
}
/*
* Test if the card supports high-speed mode and, if so, switch to it.
*/
static int mmc_sdio_switch_hs(struct mmc_card *card, int enable)
{
int ret;
u8 speed;
if (!(card->host->caps & MMC_CAP_SD_HIGHSPEED))
return 0;
if (!card->cccr.high_speed)
return 0;
ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed);
if (ret)
return ret;
if (enable)
speed |= SDIO_SPEED_EHS;
else
speed &= ~SDIO_SPEED_EHS;
ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL);
if (ret)
return ret;
return 1;
}
/*
* Enable SDIO/combo card's high-speed mode. Return 0/1 if [not]supported.
*/
static int sdio_enable_hs(struct mmc_card *card)
{
int ret;
ret = mmc_sdio_switch_hs(card, true);
if (ret <= 0 || card->type == MMC_TYPE_SDIO)
return ret;
ret = mmc_sd_switch_hs(card);
if (ret <= 0)
mmc_sdio_switch_hs(card, false);
return ret;
}
static unsigned mmc_sdio_get_max_clock(struct mmc_card *card)
{
unsigned max_dtr;
if (mmc_card_hs(card)) {
/*
* The SDIO specification doesn't mention how
* the CIS transfer speed register relates to
* high-speed, but it seems that 50 MHz is
* mandatory.
*/
max_dtr = 50000000;
} else {
max_dtr = card->cis.max_dtr;
}
if (card->type == MMC_TYPE_SD_COMBO)
max_dtr = min(max_dtr, mmc_sd_get_max_clock(card));
return max_dtr;
}
static unsigned char host_drive_to_sdio_drive(int host_strength)
{
switch (host_strength) {
case MMC_SET_DRIVER_TYPE_A:
return SDIO_DTSx_SET_TYPE_A;
case MMC_SET_DRIVER_TYPE_B:
return SDIO_DTSx_SET_TYPE_B;
case MMC_SET_DRIVER_TYPE_C:
return SDIO_DTSx_SET_TYPE_C;
case MMC_SET_DRIVER_TYPE_D:
return SDIO_DTSx_SET_TYPE_D;
default:
return SDIO_DTSx_SET_TYPE_B;
}
}
static void sdio_select_driver_type(struct mmc_card *card)
{
int card_drv_type, drive_strength, drv_type;
unsigned char card_strength;
int err;
card->drive_strength = 0;
card_drv_type = card->sw_caps.sd3_drv_type | SD_DRIVER_TYPE_B;
drive_strength = mmc_select_drive_strength(card,
card->sw_caps.uhs_max_dtr,
card_drv_type, &drv_type);
if (drive_strength) {
/* if error just use default for drive strength B */
err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_DRIVE_STRENGTH, 0,
&card_strength);
if (err)
return;
card_strength &= ~(SDIO_DRIVE_DTSx_MASK<<SDIO_DRIVE_DTSx_SHIFT);
card_strength |= host_drive_to_sdio_drive(drive_strength);
/* if error default to drive strength B */
err = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_DRIVE_STRENGTH,
card_strength, NULL);
if (err)
return;
card->drive_strength = drive_strength;
}
if (drv_type)
mmc_set_driver_type(card->host, drv_type);
}
static int sdio_set_bus_speed_mode(struct mmc_card *card)
{
unsigned int bus_speed, timing;
int err;
unsigned char speed;
/*
* If the host doesn't support any of the UHS-I modes, fallback on
* default speed.
*/
if (!mmc_host_uhs(card->host))
return 0;
bus_speed = SDIO_SPEED_SDR12;
timing = MMC_TIMING_UHS_SDR12;
if ((card->host->caps & MMC_CAP_UHS_SDR104) &&
(card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104)) {
bus_speed = SDIO_SPEED_SDR104;
timing = MMC_TIMING_UHS_SDR104;
card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR;
card->sd_bus_speed = UHS_SDR104_BUS_SPEED;
} else if ((card->host->caps & MMC_CAP_UHS_DDR50) &&
(card->sw_caps.sd3_bus_mode & SD_MODE_UHS_DDR50)) {
bus_speed = SDIO_SPEED_DDR50;
timing = MMC_TIMING_UHS_DDR50;
card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR;
card->sd_bus_speed = UHS_DDR50_BUS_SPEED;
} else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
MMC_CAP_UHS_SDR50)) && (card->sw_caps.sd3_bus_mode &
SD_MODE_UHS_SDR50)) {
bus_speed = SDIO_SPEED_SDR50;
timing = MMC_TIMING_UHS_SDR50;
card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR;
card->sd_bus_speed = UHS_SDR50_BUS_SPEED;
} else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25)) &&
(card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR25)) {
bus_speed = SDIO_SPEED_SDR25;
timing = MMC_TIMING_UHS_SDR25;
card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR;
card->sd_bus_speed = UHS_SDR25_BUS_SPEED;
} else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25 |
MMC_CAP_UHS_SDR12)) && (card->sw_caps.sd3_bus_mode &
SD_MODE_UHS_SDR12)) {
bus_speed = SDIO_SPEED_SDR12;
timing = MMC_TIMING_UHS_SDR12;
card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR;
card->sd_bus_speed = UHS_SDR12_BUS_SPEED;
}
err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed);
if (err)
return err;
speed &= ~SDIO_SPEED_BSS_MASK;
speed |= bus_speed;
err = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL);
if (err)
return err;
if (bus_speed) {
mmc_set_timing(card->host, timing);
mmc_set_clock(card->host, card->sw_caps.uhs_max_dtr);
}
return 0;
}
/*
* UHS-I specific initialization procedure
*/
static int mmc_sdio_init_uhs_card(struct mmc_card *card)
{
int err;
if (!card->scr.sda_spec3)
return 0;
/*
* Switch to wider bus (if supported).
*/
if (card->host->caps & MMC_CAP_4_BIT_DATA)
err = sdio_enable_4bit_bus(card);
/* Set the driver strength for the card */
sdio_select_driver_type(card);
/* Set bus speed mode of the card */
err = sdio_set_bus_speed_mode(card);
if (err)
goto out;
/*
* SPI mode doesn't define CMD19 and tuning is only valid for SDR50 and
* SDR104 mode SD-cards. Note that tuning is mandatory for SDR104.
*/
if (!mmc_host_is_spi(card->host) &&
((card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR50) ||
(card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104)))
err = mmc_execute_tuning(card);
out:
return err;
}
/*
* Handle the detection and initialisation of a card.
*
* In the case of a resume, "oldcard" will contain the card
* we're trying to reinitialise.
*/
static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
struct mmc_card *oldcard, int powered_resume)
{
struct mmc_card *card;
int err;
int retries = 10;
u32 rocr = 0;
u32 ocr_card = ocr;
BUG_ON(!host);
WARN_ON(!host->claimed);
/* to query card if 1.8V signalling is supported */
if (mmc_host_uhs(host))
ocr |= R4_18V_PRESENT;
try_again:
if (!retries) {
pr_warn("%s: Skipping voltage switch\n", mmc_hostname(host));
ocr &= ~R4_18V_PRESENT;
}
/*
* Inform the card of the voltage
*/
if (!powered_resume) {
err = mmc_send_io_op_cond(host, ocr, &rocr);
if (err)
goto err;
}
/*
* For SPI, enable CRC as appropriate.
*/
if (mmc_host_is_spi(host)) {
err = mmc_spi_set_crc(host, use_spi_crc);
if (err)
goto err;
}
/*
* Allocate card structure.
*/
card = mmc_alloc_card(host, NULL);
if (IS_ERR(card)) {
err = PTR_ERR(card);
goto err;
}
if ((rocr & R4_MEMORY_PRESENT) &&
mmc_sd_get_cid(host, ocr & rocr, card->raw_cid, NULL) == 0) {
card->type = MMC_TYPE_SD_COMBO;
if (oldcard && (oldcard->type != MMC_TYPE_SD_COMBO ||
memcmp(card->raw_cid, oldcard->raw_cid, sizeof(card->raw_cid)) != 0)) {
mmc_remove_card(card);
return -ENOENT;
}
} else {
card->type = MMC_TYPE_SDIO;
if (oldcard && oldcard->type != MMC_TYPE_SDIO) {
mmc_remove_card(card);
return -ENOENT;
}
}
/*
* Call the optional HC's init_card function to handle quirks.
*/
if (host->ops->init_card)
host->ops->init_card(host, card);
/*
* If the host and card support UHS-I mode request the card
* to switch to 1.8V signaling level. No 1.8v signalling if
* UHS mode is not enabled to maintain compatibility and some
* systems that claim 1.8v signalling in fact do not support
* it.
*/
if (!powered_resume && (rocr & ocr & R4_18V_PRESENT)) {
err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180,
ocr);
if (err == -EAGAIN) {
sdio_reset(host);
mmc_go_idle(host);
mmc_send_if_cond(host, host->ocr_avail);
mmc_remove_card(card);
retries--;
goto try_again;
} else if (err) {
ocr &= ~R4_18V_PRESENT;
}
err = 0;
} else {
ocr &= ~R4_18V_PRESENT;
}
/*
* For native busses: set card RCA and quit open drain mode.
*/
if (!powered_resume && !mmc_host_is_spi(host)) {
err = mmc_send_relative_addr(host, &card->rca);
if (err)
goto remove;
/*
* Update oldcard with the new RCA received from the SDIO
* device -- we're doing this so that it's updated in the
* "card" struct when oldcard overwrites that later.
*/
if (oldcard)
oldcard->rca = card->rca;
}
/*
* Read CSD, before selecting the card
*/
if (!oldcard && card->type == MMC_TYPE_SD_COMBO) {
err = mmc_sd_get_csd(host, card);
if (err)
return err;
mmc_decode_cid(card);
}
/*
* Select card, as all following commands rely on that.
*/
if (!powered_resume && !mmc_host_is_spi(host)) {
err = mmc_select_card(card);
if (err)
goto remove;
}
if (card->quirks & MMC_QUIRK_NONSTD_SDIO) {
/*
* This is non-standard SDIO device, meaning it doesn't
* have any CIA (Common I/O area) registers present.
* It's host's responsibility to fill cccr and cis
* structures in init_card().
*/
mmc_set_clock(host, card->cis.max_dtr);
if (card->cccr.high_speed) {
mmc_set_timing(card->host, MMC_TIMING_SD_HS);
}
goto finish;
}
#ifdef CONFIG_MMC_EMBEDDED_SDIO
if (host->embedded_sdio_data.cccr)
memcpy(&card->cccr, host->embedded_sdio_data.cccr, sizeof(struct sdio_cccr));
else {
#endif
/*
* Read the common registers.
*/
err = sdio_read_cccr(card, ocr);
if (err)
goto remove;
#ifdef CONFIG_MMC_EMBEDDED_SDIO
}
#endif
#ifdef CONFIG_MMC_EMBEDDED_SDIO
if (host->embedded_sdio_data.cis)
memcpy(&card->cis, host->embedded_sdio_data.cis, sizeof(struct sdio_cis));
else {
#endif
/*
* Read the common CIS tuples.
*/
err = sdio_read_common_cis(card);
if (err)
goto remove;
#ifdef CONFIG_MMC_EMBEDDED_SDIO
}
#endif
if (oldcard) {
int same = (card->cis.vendor == oldcard->cis.vendor &&
card->cis.device == oldcard->cis.device);
mmc_remove_card(card);
if (!same)
return -ENOENT;
card = oldcard;
}
card->ocr = ocr_card;
mmc_fixup_device(card, NULL);
if (card->type == MMC_TYPE_SD_COMBO) {
err = mmc_sd_setup_card(host, card, oldcard != NULL);
/* handle as SDIO-only card if memory init failed */
if (err) {
mmc_go_idle(host);
if (mmc_host_is_spi(host))
/* should not fail, as it worked previously */
mmc_spi_set_crc(host, use_spi_crc);
card->type = MMC_TYPE_SDIO;
} else
card->dev.type = &sd_type;
}
/*
* If needed, disconnect card detection pull-up resistor.
*/
err = sdio_disable_cd(card);
if (err)
goto remove;
/* Initialization sequence for UHS-I cards */
/* Only if card supports 1.8v and UHS signaling */
if ((ocr & R4_18V_PRESENT) && card->sw_caps.sd3_bus_mode) {
err = mmc_sdio_init_uhs_card(card);
if (err)
goto remove;
} else {
/*
* Switch to high-speed (if supported).
*/
err = sdio_enable_hs(card);
if (err > 0)
mmc_set_timing(card->host, MMC_TIMING_SD_HS);
else if (err)
goto remove;
/*
* Change to the card's maximum speed.
*/
mmc_set_clock(host, mmc_sdio_get_max_clock(card));
/*
* Switch to wider bus (if supported).
*/
err = sdio_enable_4bit_bus(card);
if (err)
goto remove;
}
finish:
if (!oldcard)
host->card = card;
return 0;
remove:
if (!oldcard)
mmc_remove_card(card);
err:
return err;
}
/*
* Host is being removed. Free up the current card.
*/
static void mmc_sdio_remove(struct mmc_host *host)
{
int i;
BUG_ON(!host);
BUG_ON(!host->card);
for (i = 0;i < host->card->sdio_funcs;i++) {
if (host->card->sdio_func[i]) {
sdio_remove_func(host->card->sdio_func[i]);
host->card->sdio_func[i] = NULL;
}
}
mmc_remove_card(host->card);
host->card = NULL;
}
/*
* Card detection - card is alive.
*/
static int mmc_sdio_alive(struct mmc_host *host)
{
return mmc_select_card(host->card);
}
/*
* Card detection callback from host.
*/
static void mmc_sdio_detect(struct mmc_host *host)
{
int err;
BUG_ON(!host);
BUG_ON(!host->card);
/* Make sure card is powered before detecting it */
if (host->caps & MMC_CAP_POWER_OFF_CARD) {
err = pm_runtime_get_sync(&host->card->dev);
if (err < 0) {
pm_runtime_put_noidle(&host->card->dev);
goto out;
}
}
mmc_claim_host(host);
/*
* Just check if our card has been removed.
*/
err = _mmc_detect_card_removed(host);
mmc_release_host(host);
/*
* Tell PM core it's OK to power off the card now.
*
* The _sync variant is used in order to ensure that the card
* is left powered off in case an error occurred, and the card
* is going to be removed.
*
* Since there is no specific reason to believe a new user
* is about to show up at this point, the _sync variant is
* desirable anyway.
*/
if (host->caps & MMC_CAP_POWER_OFF_CARD)
pm_runtime_put_sync(&host->card->dev);
out:
if (err) {
mmc_sdio_remove(host);
mmc_claim_host(host);
mmc_detach_bus(host);
mmc_power_off(host);
mmc_release_host(host);
}
}
/*
* SDIO pre_suspend. We need to suspend all functions separately.
* Therefore all registered functions must have drivers with suspend
* and resume methods. Failing that we simply remove the whole card.
*/
static int mmc_sdio_pre_suspend(struct mmc_host *host)
{
int i, err = 0;
for (i = 0; i < host->card->sdio_funcs; i++) {
struct sdio_func *func = host->card->sdio_func[i];
if (func && sdio_func_present(func) && func->dev.driver) {
const struct dev_pm_ops *pmops = func->dev.driver->pm;
if (!pmops || !pmops->suspend || !pmops->resume) {
/* force removal of entire card in that case */
err = -ENOSYS;
break;
}
}
}
return err;
}
/*
* SDIO suspend. Suspend all functions separately.
*/
static int mmc_sdio_suspend(struct mmc_host *host)
{
mmc_claim_host(host);
if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host))
sdio_disable_wide(host->card);
if (!mmc_card_keep_power(host)) {
mmc_power_off(host);
} else if (host->retune_period) {
mmc_retune_timer_stop(host);
mmc_retune_needed(host);
}
mmc_release_host(host);
return 0;
}
static int mmc_sdio_resume(struct mmc_host *host)
{
int err = 0;
BUG_ON(!host);
BUG_ON(!host->card);
/* Basic card reinitialization. */
mmc_claim_host(host);
/* Restore power if needed */
if (!mmc_card_keep_power(host)) {
mmc_power_up(host, host->card->ocr);
/*
* Tell runtime PM core we just powered up the card,
* since it still believes the card is powered off.
* Note that currently runtime PM is only enabled
* for SDIO cards that are MMC_CAP_POWER_OFF_CARD
*/
if (host->caps & MMC_CAP_POWER_OFF_CARD) {
pm_runtime_disable(&host->card->dev);
pm_runtime_set_active(&host->card->dev);
pm_runtime_enable(&host->card->dev);
}
}
/* No need to reinitialize powered-resumed nonremovable cards */
if (mmc_card_is_removable(host) || !mmc_card_keep_power(host)) {
sdio_reset(host);
mmc_go_idle(host);
mmc_send_if_cond(host, host->card->ocr);
err = mmc_send_io_op_cond(host, 0, NULL);
if (!err)
err = mmc_sdio_init_card(host, host->card->ocr,
host->card,
mmc_card_keep_power(host));
} else if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
/* We may have switched to 1-bit mode during suspend */
err = sdio_enable_4bit_bus(host->card);
}
if (!err && host->sdio_irqs) {
if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD))
wake_up_process(host->sdio_irq_thread);
else if (host->caps & MMC_CAP_SDIO_IRQ)
host->ops->enable_sdio_irq(host, 1);
}
mmc_release_host(host);
host->pm_flags &= ~MMC_PM_KEEP_POWER;
return err;
}
static int mmc_sdio_power_restore(struct mmc_host *host)
{
int ret;
BUG_ON(!host);
BUG_ON(!host->card);
mmc_claim_host(host);
/*
* Reset the card by performing the same steps that are taken by
* mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe.
*
* sdio_reset() is technically not needed. Having just powered up the
* hardware, it should already be in reset state. However, some
* platforms (such as SD8686 on OLPC) do not instantly cut power,
* meaning that a reset is required when restoring power soon after
* powering off. It is harmless in other cases.
*
* The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec,
* is not necessary for non-removable cards. However, it is required
* for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and
* harmless in other situations.
*
*/
sdio_reset(host);
mmc_go_idle(host);
mmc_send_if_cond(host, host->card->ocr);
ret = mmc_send_io_op_cond(host, 0, NULL);
if (ret)
goto out;
ret = mmc_sdio_init_card(host, host->card->ocr, host->card,
mmc_card_keep_power(host));
if (!ret && host->sdio_irqs)
mmc_signal_sdio_irq(host);
out:
mmc_release_host(host);
return ret;
}
static int mmc_sdio_runtime_suspend(struct mmc_host *host)
{
/* No references to the card, cut the power to it. */
mmc_claim_host(host);
mmc_power_off(host);
mmc_release_host(host);
return 0;
}
static int mmc_sdio_runtime_resume(struct mmc_host *host)
{
int ret;
/* Restore power and re-initialize. */
mmc_claim_host(host);
mmc_power_up(host, host->card->ocr);
ret = mmc_sdio_power_restore(host);
mmc_release_host(host);
return ret;
}
static int mmc_sdio_reset(struct mmc_host *host)
{
mmc_power_cycle(host, host->card->ocr);
return mmc_sdio_power_restore(host);
}
static const struct mmc_bus_ops mmc_sdio_ops = {
.remove = mmc_sdio_remove,
.detect = mmc_sdio_detect,
.pre_suspend = mmc_sdio_pre_suspend,
.suspend = mmc_sdio_suspend,
.resume = mmc_sdio_resume,
.runtime_suspend = mmc_sdio_runtime_suspend,
.runtime_resume = mmc_sdio_runtime_resume,
.power_restore = mmc_sdio_power_restore,
.alive = mmc_sdio_alive,
.reset = mmc_sdio_reset,
};
/*
* Starting point for SDIO card init.
*/
int mmc_attach_sdio(struct mmc_host *host)
{
int err, i, funcs;
u32 ocr, rocr;
struct mmc_card *card;
BUG_ON(!host);
WARN_ON(!host->claimed);
err = mmc_send_io_op_cond(host, 0, &ocr);
if (err)
return err;
mmc_attach_bus(host, &mmc_sdio_ops);
if (host->ocr_avail_sdio)
host->ocr_avail = host->ocr_avail_sdio;
rocr = mmc_select_voltage(host, ocr);
/*
* Can we support the voltage(s) of the card(s)?
*/
if (!rocr) {
err = -EINVAL;
goto err;
}
/*
* Detect and init the card.
*/
err = mmc_sdio_init_card(host, rocr, NULL, 0);
if (err)
goto err;
card = host->card;
/*
* Enable runtime PM only if supported by host+card+board
*/
if (host->caps & MMC_CAP_POWER_OFF_CARD) {
/*
* Let runtime PM core know our card is active
*/
err = pm_runtime_set_active(&card->dev);
if (err)
goto remove;
/*
* Enable runtime PM for this card
*/
pm_runtime_enable(&card->dev);
}
/*
* The number of functions on the card is encoded inside
* the ocr.
*/
funcs = (ocr & 0x70000000) >> 28;
card->sdio_funcs = 0;
#ifdef CONFIG_MMC_EMBEDDED_SDIO
if (host->embedded_sdio_data.funcs)
card->sdio_funcs = funcs = host->embedded_sdio_data.num_funcs;
#endif
/*
* Initialize (but don't add) all present functions.
*/
for (i = 0; i < funcs; i++, card->sdio_funcs++) {
#ifdef CONFIG_MMC_EMBEDDED_SDIO
if (host->embedded_sdio_data.funcs) {
struct sdio_func *tmp;
tmp = sdio_alloc_func(host->card);
if (IS_ERR(tmp))
goto remove;
tmp->num = (i + 1);
card->sdio_func[i] = tmp;
tmp->class = host->embedded_sdio_data.funcs[i].f_class;
tmp->max_blksize = host->embedded_sdio_data.funcs[i].f_maxblksize;
tmp->vendor = card->cis.vendor;
tmp->device = card->cis.device;
} else {
#endif
err = sdio_init_func(host->card, i + 1);
if (err)
goto remove;
#ifdef CONFIG_MMC_EMBEDDED_SDIO
}
#endif
/*
* Enable Runtime PM for this func (if supported)
*/
if (host->caps & MMC_CAP_POWER_OFF_CARD)
pm_runtime_enable(&card->sdio_func[i]->dev);
}
/*
* First add the card to the driver model...
*/
mmc_release_host(host);
err = mmc_add_card(host->card);
if (err)
goto remove_added;
/*
* ...then the SDIO functions.
*/
for (i = 0;i < funcs;i++) {
err = sdio_add_func(host->card->sdio_func[i]);
if (err)
goto remove_added;
}
mmc_claim_host(host);
return 0;
remove_added:
/* Remove without lock if the device has been added. */
mmc_sdio_remove(host);
mmc_claim_host(host);
remove:
/* And with lock if it hasn't been added. */
mmc_release_host(host);
if (host->card)
mmc_sdio_remove(host);
mmc_claim_host(host);
err:
mmc_detach_bus(host);
pr_err("%s: error %d whilst initialising SDIO card\n",
mmc_hostname(host), err);
return err;
}
int sdio_reset_comm(struct mmc_card *card)
{
struct mmc_host *host = card->host;
u32 ocr;
u32 rocr;
int err;
printk("%s():\n", __func__);
mmc_claim_host(host);
mmc_retune_disable(host);
mmc_go_idle(host);
mmc_set_clock(host, host->f_min);
err = mmc_send_io_op_cond(host, 0, &ocr);
if (err)
goto err;
rocr = mmc_select_voltage(host, ocr);
if (!rocr) {
err = -EINVAL;
goto err;
}
err = mmc_sdio_init_card(host, rocr, card, 0);
if (err)
goto err;
mmc_release_host(host);
return 0;
err:
printk("%s: Error resetting SDIO communications (%d)\n",
mmc_hostname(host), err);
mmc_release_host(host);
return err;
}
EXPORT_SYMBOL(sdio_reset_comm);