/* * rtrap.S: Preparing for return from trap on Sparc V9. * * Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz) * Copyright (C) 1997 David S. Miller (davem@caip.rutgers.edu) */ #include <asm/asi.h> #include <asm/pstate.h> #include <asm/ptrace.h> #include <asm/spitfire.h> #include <asm/head.h> #include <asm/visasm.h> #include <asm/processor.h> #define RTRAP_PSTATE (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV|PSTATE_IE) #define RTRAP_PSTATE_IRQOFF (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV) #define RTRAP_PSTATE_AG_IRQOFF (PSTATE_TSO|PSTATE_PEF|PSTATE_PRIV|PSTATE_AG) #ifdef CONFIG_CONTEXT_TRACKING # define SCHEDULE_USER schedule_user #else # define SCHEDULE_USER schedule #endif .text .align 32 __handle_preemption: call SCHEDULE_USER wrpr %g0, RTRAP_PSTATE, %pstate ba,pt %xcc, __handle_preemption_continue wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate __handle_user_windows: call fault_in_user_windows wrpr %g0, RTRAP_PSTATE, %pstate ba,pt %xcc, __handle_preemption_continue wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate __handle_userfpu: rd %fprs, %l5 andcc %l5, FPRS_FEF, %g0 sethi %hi(TSTATE_PEF), %o0 be,a,pn %icc, __handle_userfpu_continue andn %l1, %o0, %l1 ba,a,pt %xcc, __handle_userfpu_continue __handle_signal: mov %l5, %o1 add %sp, PTREGS_OFF, %o0 mov %l0, %o2 call do_notify_resume wrpr %g0, RTRAP_PSTATE, %pstate wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate /* Signal delivery can modify pt_regs tstate, so we must * reload it. */ ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1 sethi %hi(0xf << 20), %l4 and %l1, %l4, %l4 ba,pt %xcc, __handle_preemption_continue andn %l1, %l4, %l1 /* When returning from a NMI (%pil==15) interrupt we want to * avoid running softirqs, doing IRQ tracing, preempting, etc. */ .globl rtrap_nmi rtrap_nmi: ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1 sethi %hi(0xf << 20), %l4 and %l1, %l4, %l4 andn %l1, %l4, %l1 srl %l4, 20, %l4 ba,pt %xcc, rtrap_no_irq_enable nop /* Do not actually set the %pil here. We will do that * below after we clear PSTATE_IE in the %pstate register. * If we re-enable interrupts here, we can recurse down * the hardirq stack potentially endlessly, causing a * stack overflow. */ .align 64 .globl rtrap_irq, rtrap, irqsz_patchme, rtrap_xcall rtrap_irq: rtrap: /* mm/ultra.S:xcall_report_regs KNOWS about this load. */ ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1 rtrap_xcall: sethi %hi(0xf << 20), %l4 and %l1, %l4, %l4 andn %l1, %l4, %l1 srl %l4, 20, %l4 #ifdef CONFIG_TRACE_IRQFLAGS brnz,pn %l4, rtrap_no_irq_enable nop call trace_hardirqs_on nop /* Do not actually set the %pil here. We will do that * below after we clear PSTATE_IE in the %pstate register. * If we re-enable interrupts here, we can recurse down * the hardirq stack potentially endlessly, causing a * stack overflow. * * It is tempting to put this test and trace_hardirqs_on * call at the 'rt_continue' label, but that will not work * as that path hits unconditionally and we do not want to * execute this in NMI return paths, for example. */ #endif rtrap_no_irq_enable: andcc %l1, TSTATE_PRIV, %l3 bne,pn %icc, to_kernel nop /* We must hold IRQs off and atomically test schedule+signal * state, then hold them off all the way back to userspace. * If we are returning to kernel, none of this matters. Note * that we are disabling interrupts via PSTATE_IE, not using * %pil. * * If we do not do this, there is a window where we would do * the tests, later the signal/resched event arrives but we do * not process it since we are still in kernel mode. It would * take until the next local IRQ before the signal/resched * event would be handled. * * This also means that if we have to deal with user * windows, we have to redo all of these sched+signal checks * with IRQs disabled. */ to_user: wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate wrpr 0, %pil __handle_preemption_continue: ldx [%g6 + TI_FLAGS], %l0 sethi %hi(_TIF_USER_WORK_MASK), %o0 or %o0, %lo(_TIF_USER_WORK_MASK), %o0 andcc %l0, %o0, %g0 sethi %hi(TSTATE_PEF), %o0 be,pt %xcc, user_nowork andcc %l1, %o0, %g0 andcc %l0, _TIF_NEED_RESCHED, %g0 bne,pn %xcc, __handle_preemption andcc %l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0 bne,pn %xcc, __handle_signal ldub [%g6 + TI_WSAVED], %o2 brnz,pn %o2, __handle_user_windows nop sethi %hi(TSTATE_PEF), %o0 andcc %l1, %o0, %g0 /* This fpdepth clear is necessary for non-syscall rtraps only */ user_nowork: bne,pn %xcc, __handle_userfpu stb %g0, [%g6 + TI_FPDEPTH] __handle_userfpu_continue: rt_continue: ldx [%sp + PTREGS_OFF + PT_V9_G1], %g1 ldx [%sp + PTREGS_OFF + PT_V9_G2], %g2 ldx [%sp + PTREGS_OFF + PT_V9_G3], %g3 ldx [%sp + PTREGS_OFF + PT_V9_G4], %g4 ldx [%sp + PTREGS_OFF + PT_V9_G5], %g5 brz,pt %l3, 1f mov %g6, %l2 /* Must do this before thread reg is clobbered below. */ LOAD_PER_CPU_BASE(%g5, %g6, %i0, %i1, %i2) 1: ldx [%sp + PTREGS_OFF + PT_V9_G6], %g6 ldx [%sp + PTREGS_OFF + PT_V9_G7], %g7 /* Normal globals are restored, go to trap globals. */ 661: wrpr %g0, RTRAP_PSTATE_AG_IRQOFF, %pstate nop .section .sun4v_2insn_patch, "ax" .word 661b wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate SET_GL(1) .previous mov %l2, %g6 ldx [%sp + PTREGS_OFF + PT_V9_I0], %i0 ldx [%sp + PTREGS_OFF + PT_V9_I1], %i1 ldx [%sp + PTREGS_OFF + PT_V9_I2], %i2 ldx [%sp + PTREGS_OFF + PT_V9_I3], %i3 ldx [%sp + PTREGS_OFF + PT_V9_I4], %i4 ldx [%sp + PTREGS_OFF + PT_V9_I5], %i5 ldx [%sp + PTREGS_OFF + PT_V9_I6], %i6 ldx [%sp + PTREGS_OFF + PT_V9_I7], %i7 ldx [%sp + PTREGS_OFF + PT_V9_TPC], %l2 ldx [%sp + PTREGS_OFF + PT_V9_TNPC], %o2 ld [%sp + PTREGS_OFF + PT_V9_Y], %o3 wr %o3, %g0, %y wrpr %l4, 0x0, %pil wrpr %g0, 0x1, %tl andn %l1, TSTATE_SYSCALL, %l1 wrpr %l1, %g0, %tstate wrpr %l2, %g0, %tpc wrpr %o2, %g0, %tnpc brnz,pn %l3, kern_rtt mov PRIMARY_CONTEXT, %l7 661: ldxa [%l7 + %l7] ASI_DMMU, %l0 .section .sun4v_1insn_patch, "ax" .word 661b ldxa [%l7 + %l7] ASI_MMU, %l0 .previous sethi %hi(sparc64_kern_pri_nuc_bits), %l1 ldx [%l1 + %lo(sparc64_kern_pri_nuc_bits)], %l1 or %l0, %l1, %l0 661: stxa %l0, [%l7] ASI_DMMU .section .sun4v_1insn_patch, "ax" .word 661b stxa %l0, [%l7] ASI_MMU .previous sethi %hi(KERNBASE), %l7 flush %l7 rdpr %wstate, %l1 rdpr %otherwin, %l2 srl %l1, 3, %l1 wrpr %l2, %g0, %canrestore wrpr %l1, %g0, %wstate brnz,pt %l2, user_rtt_restore wrpr %g0, %g0, %otherwin ldx [%g6 + TI_FLAGS], %g3 wr %g0, ASI_AIUP, %asi rdpr %cwp, %g1 andcc %g3, _TIF_32BIT, %g0 sub %g1, 1, %g1 bne,pt %xcc, user_rtt_fill_32bit wrpr %g1, %cwp ba,a,pt %xcc, user_rtt_fill_64bit user_rtt_fill_fixup: rdpr %cwp, %g1 add %g1, 1, %g1 wrpr %g1, 0x0, %cwp rdpr %wstate, %g2 sll %g2, 3, %g2 wrpr %g2, 0x0, %wstate /* We know %canrestore and %otherwin are both zero. */ sethi %hi(sparc64_kern_pri_context), %g2 ldx [%g2 + %lo(sparc64_kern_pri_context)], %g2 mov PRIMARY_CONTEXT, %g1 661: stxa %g2, [%g1] ASI_DMMU .section .sun4v_1insn_patch, "ax" .word 661b stxa %g2, [%g1] ASI_MMU .previous sethi %hi(KERNBASE), %g1 flush %g1 or %g4, FAULT_CODE_WINFIXUP, %g4 stb %g4, [%g6 + TI_FAULT_CODE] stx %g5, [%g6 + TI_FAULT_ADDR] mov %g6, %l1 wrpr %g0, 0x0, %tl 661: nop .section .sun4v_1insn_patch, "ax" .word 661b SET_GL(0) .previous wrpr %g0, RTRAP_PSTATE, %pstate mov %l1, %g6 ldx [%g6 + TI_TASK], %g4 LOAD_PER_CPU_BASE(%g5, %g6, %g1, %g2, %g3) call do_sparc64_fault add %sp, PTREGS_OFF, %o0 ba,pt %xcc, rtrap nop user_rtt_pre_restore: add %g1, 1, %g1 wrpr %g1, 0x0, %cwp user_rtt_restore: restore rdpr %canrestore, %g1 wrpr %g1, 0x0, %cleanwin retry nop kern_rtt: rdpr %canrestore, %g1 brz,pn %g1, kern_rtt_fill nop kern_rtt_restore: stw %g0, [%sp + PTREGS_OFF + PT_V9_MAGIC] restore retry to_kernel: #ifdef CONFIG_PREEMPT ldsw [%g6 + TI_PRE_COUNT], %l5 brnz %l5, kern_fpucheck ldx [%g6 + TI_FLAGS], %l5 andcc %l5, _TIF_NEED_RESCHED, %g0 be,pt %xcc, kern_fpucheck nop cmp %l4, 0 bne,pn %xcc, kern_fpucheck nop call preempt_schedule_irq nop ba,pt %xcc, rtrap #endif kern_fpucheck: ldub [%g6 + TI_FPDEPTH], %l5 brz,pt %l5, rt_continue srl %l5, 1, %o0 add %g6, TI_FPSAVED, %l6 ldub [%l6 + %o0], %l2 sub %l5, 2, %l5 add %g6, TI_GSR, %o1 andcc %l2, (FPRS_FEF|FPRS_DU), %g0 be,pt %icc, 2f and %l2, FPRS_DL, %l6 andcc %l2, FPRS_FEF, %g0 be,pn %icc, 5f sll %o0, 3, %o5 rd %fprs, %g1 wr %g1, FPRS_FEF, %fprs ldx [%o1 + %o5], %g1 add %g6, TI_XFSR, %o1 sll %o0, 8, %o2 add %g6, TI_FPREGS, %o3 brz,pn %l6, 1f add %g6, TI_FPREGS+0x40, %o4 membar #Sync ldda [%o3 + %o2] ASI_BLK_P, %f0 ldda [%o4 + %o2] ASI_BLK_P, %f16 membar #Sync 1: andcc %l2, FPRS_DU, %g0 be,pn %icc, 1f wr %g1, 0, %gsr add %o2, 0x80, %o2 membar #Sync ldda [%o3 + %o2] ASI_BLK_P, %f32 ldda [%o4 + %o2] ASI_BLK_P, %f48 1: membar #Sync ldx [%o1 + %o5], %fsr 2: stb %l5, [%g6 + TI_FPDEPTH] ba,pt %xcc, rt_continue nop 5: wr %g0, FPRS_FEF, %fprs sll %o0, 8, %o2 add %g6, TI_FPREGS+0x80, %o3 add %g6, TI_FPREGS+0xc0, %o4 membar #Sync ldda [%o3 + %o2] ASI_BLK_P, %f32 ldda [%o4 + %o2] ASI_BLK_P, %f48 membar #Sync wr %g0, FPRS_DU, %fprs ba,pt %xcc, rt_continue stb %l5, [%g6 + TI_FPDEPTH]