- 根目录:
- drivers
- usb
- serial
- pl2303.c
/*
* Prolific PL2303 USB to serial adaptor driver
*
* Copyright (C) 2001-2007 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (C) 2003 IBM Corp.
*
* Original driver for 2.2.x by anonymous
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
* See Documentation/usb/usb-serial.txt for more information on using this
* driver
*/
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/serial.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#include <linux/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <asm/unaligned.h>
#include "pl2303.h"
#define PL2303_QUIRK_UART_STATE_IDX0 BIT(0)
#define PL2303_QUIRK_LEGACY BIT(1)
static const struct usb_device_id id_table[] = {
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ2) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_DCU11) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_HCR331) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MOTOROLA) },
{ USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ZTEK) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) },
{ USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) },
{ USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) },
{ USB_DEVICE(ATEN_VENDOR_ID2, ATEN_PRODUCT_ID) },
{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID) },
{ USB_DEVICE(ELCOM_VENDOR_ID, ELCOM_PRODUCT_ID_UCSGT) },
{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID) },
{ USB_DEVICE(ITEGNO_VENDOR_ID, ITEGNO_PRODUCT_ID_2080) },
{ USB_DEVICE(MA620_VENDOR_ID, MA620_PRODUCT_ID) },
{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID) },
{ USB_DEVICE(TRIPP_VENDOR_ID, TRIPP_PRODUCT_ID) },
{ USB_DEVICE(RADIOSHACK_VENDOR_ID, RADIOSHACK_PRODUCT_ID) },
{ USB_DEVICE(DCU10_VENDOR_ID, DCU10_PRODUCT_ID) },
{ USB_DEVICE(SITECOM_VENDOR_ID, SITECOM_PRODUCT_ID) },
{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_ID) },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_SX1),
.driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X65),
.driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_X75),
.driver_info = PL2303_QUIRK_UART_STATE_IDX0 },
{ USB_DEVICE(SIEMENS_VENDOR_ID, SIEMENS_PRODUCT_ID_EF81) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_ID_S81) }, /* Benq/Siemens S81 */
{ USB_DEVICE(SYNTECH_VENDOR_ID, SYNTECH_PRODUCT_ID) },
{ USB_DEVICE(NOKIA_CA42_VENDOR_ID, NOKIA_CA42_PRODUCT_ID) },
{ USB_DEVICE(CA_42_CA42_VENDOR_ID, CA_42_CA42_PRODUCT_ID) },
{ USB_DEVICE(SAGEM_VENDOR_ID, SAGEM_PRODUCT_ID) },
{ USB_DEVICE(LEADTEK_VENDOR_ID, LEADTEK_9531_PRODUCT_ID) },
{ USB_DEVICE(SPEEDDRAGON_VENDOR_ID, SPEEDDRAGON_PRODUCT_ID) },
{ USB_DEVICE(DATAPILOT_U2_VENDOR_ID, DATAPILOT_U2_PRODUCT_ID) },
{ USB_DEVICE(BELKIN_VENDOR_ID, BELKIN_PRODUCT_ID) },
{ USB_DEVICE(ALCOR_VENDOR_ID, ALCOR_PRODUCT_ID) },
{ USB_DEVICE(WS002IN_VENDOR_ID, WS002IN_PRODUCT_ID) },
{ USB_DEVICE(COREGA_VENDOR_ID, COREGA_PRODUCT_ID) },
{ USB_DEVICE(YCCABLE_VENDOR_ID, YCCABLE_PRODUCT_ID) },
{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },
{ USB_DEVICE(HP_VENDOR_ID, HP_LCM960_PRODUCT_ID) },
{ USB_DEVICE(CRESSI_VENDOR_ID, CRESSI_EDY_PRODUCT_ID) },
{ USB_DEVICE(ZEAGLE_VENDOR_ID, ZEAGLE_N2ITION3_PRODUCT_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
#define SET_LINE_REQUEST_TYPE 0x21
#define SET_LINE_REQUEST 0x20
#define SET_CONTROL_REQUEST_TYPE 0x21
#define SET_CONTROL_REQUEST 0x22
#define CONTROL_DTR 0x01
#define CONTROL_RTS 0x02
#define BREAK_REQUEST_TYPE 0x21
#define BREAK_REQUEST 0x23
#define BREAK_ON 0xffff
#define BREAK_OFF 0x0000
#define GET_LINE_REQUEST_TYPE 0xa1
#define GET_LINE_REQUEST 0x21
#define VENDOR_WRITE_REQUEST_TYPE 0x40
#define VENDOR_WRITE_REQUEST 0x01
#define VENDOR_READ_REQUEST_TYPE 0xc0
#define VENDOR_READ_REQUEST 0x01
#define UART_STATE_INDEX 8
#define UART_STATE_MSR_MASK 0x8b
#define UART_STATE_TRANSIENT_MASK 0x74
#define UART_DCD 0x01
#define UART_DSR 0x02
#define UART_BREAK_ERROR 0x04
#define UART_RING 0x08
#define UART_FRAME_ERROR 0x10
#define UART_PARITY_ERROR 0x20
#define UART_OVERRUN_ERROR 0x40
#define UART_CTS 0x80
static void pl2303_set_break(struct usb_serial_port *port, bool enable);
enum pl2303_type {
TYPE_01, /* Type 0 and 1 (difference unknown) */
TYPE_HX, /* HX version of the pl2303 chip */
TYPE_COUNT
};
struct pl2303_type_data {
speed_t max_baud_rate;
unsigned long quirks;
};
struct pl2303_serial_private {
const struct pl2303_type_data *type;
unsigned long quirks;
};
struct pl2303_private {
spinlock_t lock;
u8 line_control;
u8 line_status;
u8 line_settings[7];
};
static const struct pl2303_type_data pl2303_type_data[TYPE_COUNT] = {
[TYPE_01] = {
.max_baud_rate = 1228800,
.quirks = PL2303_QUIRK_LEGACY,
},
[TYPE_HX] = {
.max_baud_rate = 12000000,
},
};
static int pl2303_vendor_read(struct usb_serial *serial, u16 value,
unsigned char buf[1])
{
struct device *dev = &serial->interface->dev;
int res;
res = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
VENDOR_READ_REQUEST, VENDOR_READ_REQUEST_TYPE,
value, 0, buf, 1, 100);
if (res != 1) {
dev_err(dev, "%s - failed to read [%04x]: %d\n", __func__,
value, res);
if (res >= 0)
res = -EIO;
return res;
}
dev_dbg(dev, "%s - [%04x] = %02x\n", __func__, value, buf[0]);
return 0;
}
static int pl2303_vendor_write(struct usb_serial *serial, u16 value, u16 index)
{
struct device *dev = &serial->interface->dev;
int res;
dev_dbg(dev, "%s - [%04x] = %02x\n", __func__, value, index);
res = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
VENDOR_WRITE_REQUEST, VENDOR_WRITE_REQUEST_TYPE,
value, index, NULL, 0, 100);
if (res) {
dev_err(dev, "%s - failed to write [%04x]: %d\n", __func__,
value, res);
return res;
}
return 0;
}
static int pl2303_probe(struct usb_serial *serial,
const struct usb_device_id *id)
{
usb_set_serial_data(serial, (void *)id->driver_info);
return 0;
}
static int pl2303_startup(struct usb_serial *serial)
{
struct pl2303_serial_private *spriv;
enum pl2303_type type = TYPE_01;
unsigned char *buf;
spriv = kzalloc(sizeof(*spriv), GFP_KERNEL);
if (!spriv)
return -ENOMEM;
buf = kmalloc(1, GFP_KERNEL);
if (!buf) {
kfree(spriv);
return -ENOMEM;
}
if (serial->dev->descriptor.bDeviceClass == 0x02)
type = TYPE_01; /* type 0 */
else if (serial->dev->descriptor.bMaxPacketSize0 == 0x40)
type = TYPE_HX;
else if (serial->dev->descriptor.bDeviceClass == 0x00)
type = TYPE_01; /* type 1 */
else if (serial->dev->descriptor.bDeviceClass == 0xFF)
type = TYPE_01; /* type 1 */
dev_dbg(&serial->interface->dev, "device type: %d\n", type);
spriv->type = &pl2303_type_data[type];
spriv->quirks = (unsigned long)usb_get_serial_data(serial);
spriv->quirks |= spriv->type->quirks;
usb_set_serial_data(serial, spriv);
pl2303_vendor_read(serial, 0x8484, buf);
pl2303_vendor_write(serial, 0x0404, 0);
pl2303_vendor_read(serial, 0x8484, buf);
pl2303_vendor_read(serial, 0x8383, buf);
pl2303_vendor_read(serial, 0x8484, buf);
pl2303_vendor_write(serial, 0x0404, 1);
pl2303_vendor_read(serial, 0x8484, buf);
pl2303_vendor_read(serial, 0x8383, buf);
pl2303_vendor_write(serial, 0, 1);
pl2303_vendor_write(serial, 1, 0);
if (spriv->quirks & PL2303_QUIRK_LEGACY)
pl2303_vendor_write(serial, 2, 0x24);
else
pl2303_vendor_write(serial, 2, 0x44);
kfree(buf);
return 0;
}
static void pl2303_release(struct usb_serial *serial)
{
struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
kfree(spriv);
}
static int pl2303_port_probe(struct usb_serial_port *port)
{
struct pl2303_private *priv;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
spin_lock_init(&priv->lock);
usb_set_serial_port_data(port, priv);
port->port.drain_delay = 256;
return 0;
}
static int pl2303_port_remove(struct usb_serial_port *port)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
kfree(priv);
return 0;
}
static int pl2303_set_control_lines(struct usb_serial_port *port, u8 value)
{
struct usb_device *dev = port->serial->dev;
int retval;
dev_dbg(&port->dev, "%s - %02x\n", __func__, value);
retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
SET_CONTROL_REQUEST, SET_CONTROL_REQUEST_TYPE,
value, 0, NULL, 0, 100);
if (retval)
dev_err(&port->dev, "%s - failed: %d\n", __func__, retval);
return retval;
}
/*
* Returns the nearest supported baud rate that can be set directly without
* using divisors.
*/
static speed_t pl2303_get_supported_baud_rate(speed_t baud)
{
static const speed_t baud_sup[] = {
75, 150, 300, 600, 1200, 1800, 2400, 3600, 4800, 7200, 9600,
14400, 19200, 28800, 38400, 57600, 115200, 230400, 460800,
614400, 921600, 1228800, 2457600, 3000000, 6000000
};
unsigned i;
for (i = 0; i < ARRAY_SIZE(baud_sup); ++i) {
if (baud_sup[i] > baud)
break;
}
if (i == ARRAY_SIZE(baud_sup))
baud = baud_sup[i - 1];
else if (i > 0 && (baud_sup[i] - baud) > (baud - baud_sup[i - 1]))
baud = baud_sup[i - 1];
else
baud = baud_sup[i];
return baud;
}
/*
* NOTE: If unsupported baud rates are set directly, the PL2303 seems to
* use 9600 baud.
*/
static speed_t pl2303_encode_baud_rate_direct(unsigned char buf[4],
speed_t baud)
{
put_unaligned_le32(baud, buf);
return baud;
}
static speed_t pl2303_encode_baud_rate_divisor(unsigned char buf[4],
speed_t baud)
{
unsigned int tmp;
/*
* Apparently the formula is:
* baudrate = 12M * 32 / (2^buf[1]) / buf[0]
*/
tmp = 12000000 * 32 / baud;
buf[3] = 0x80;
buf[2] = 0;
buf[1] = (tmp >= 256);
while (tmp >= 256) {
tmp >>= 2;
buf[1] <<= 1;
}
buf[0] = tmp;
return baud;
}
static void pl2303_encode_baud_rate(struct tty_struct *tty,
struct usb_serial_port *port,
u8 buf[4])
{
struct usb_serial *serial = port->serial;
struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
speed_t baud_sup;
speed_t baud;
baud = tty_get_baud_rate(tty);
dev_dbg(&port->dev, "baud requested = %u\n", baud);
if (!baud)
return;
if (spriv->type->max_baud_rate)
baud = min_t(speed_t, baud, spriv->type->max_baud_rate);
/*
* Use direct method for supported baud rates, otherwise use divisors.
*/
baud_sup = pl2303_get_supported_baud_rate(baud);
if (baud == baud_sup)
baud = pl2303_encode_baud_rate_direct(buf, baud);
else
baud = pl2303_encode_baud_rate_divisor(buf, baud);
/* Save resulting baud rate */
tty_encode_baud_rate(tty, baud, baud);
dev_dbg(&port->dev, "baud set = %u\n", baud);
}
static int pl2303_get_line_request(struct usb_serial_port *port,
unsigned char buf[7])
{
struct usb_device *udev = port->serial->dev;
int ret;
ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
GET_LINE_REQUEST, GET_LINE_REQUEST_TYPE,
0, 0, buf, 7, 100);
if (ret != 7) {
dev_err(&port->dev, "%s - failed: %d\n", __func__, ret);
if (ret > 0)
ret = -EIO;
return ret;
}
dev_dbg(&port->dev, "%s - %7ph\n", __func__, buf);
return 0;
}
static int pl2303_set_line_request(struct usb_serial_port *port,
unsigned char buf[7])
{
struct usb_device *udev = port->serial->dev;
int ret;
ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
SET_LINE_REQUEST, SET_LINE_REQUEST_TYPE,
0, 0, buf, 7, 100);
if (ret != 7) {
dev_err(&port->dev, "%s - failed: %d\n", __func__, ret);
if (ret > 0)
ret = -EIO;
return ret;
}
dev_dbg(&port->dev, "%s - %7ph\n", __func__, buf);
return 0;
}
static void pl2303_set_termios(struct tty_struct *tty,
struct usb_serial_port *port, struct ktermios *old_termios)
{
struct usb_serial *serial = port->serial;
struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
unsigned char *buf;
int ret;
u8 control;
if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
return;
buf = kzalloc(7, GFP_KERNEL);
if (!buf) {
/* Report back no change occurred */
if (old_termios)
tty->termios = *old_termios;
return;
}
pl2303_get_line_request(port, buf);
switch (C_CSIZE(tty)) {
case CS5:
buf[6] = 5;
break;
case CS6:
buf[6] = 6;
break;
case CS7:
buf[6] = 7;
break;
default:
case CS8:
buf[6] = 8;
}
dev_dbg(&port->dev, "data bits = %d\n", buf[6]);
/* For reference buf[0]:buf[3] baud rate value */
pl2303_encode_baud_rate(tty, port, &buf[0]);
/* For reference buf[4]=0 is 1 stop bits */
/* For reference buf[4]=1 is 1.5 stop bits */
/* For reference buf[4]=2 is 2 stop bits */
if (C_CSTOPB(tty)) {
/*
* NOTE: Comply with "real" UARTs / RS232:
* use 1.5 instead of 2 stop bits with 5 data bits
*/
if (C_CSIZE(tty) == CS5) {
buf[4] = 1;
dev_dbg(&port->dev, "stop bits = 1.5\n");
} else {
buf[4] = 2;
dev_dbg(&port->dev, "stop bits = 2\n");
}
} else {
buf[4] = 0;
dev_dbg(&port->dev, "stop bits = 1\n");
}
if (C_PARENB(tty)) {
/* For reference buf[5]=0 is none parity */
/* For reference buf[5]=1 is odd parity */
/* For reference buf[5]=2 is even parity */
/* For reference buf[5]=3 is mark parity */
/* For reference buf[5]=4 is space parity */
if (C_PARODD(tty)) {
if (C_CMSPAR(tty)) {
buf[5] = 3;
dev_dbg(&port->dev, "parity = mark\n");
} else {
buf[5] = 1;
dev_dbg(&port->dev, "parity = odd\n");
}
} else {
if (C_CMSPAR(tty)) {
buf[5] = 4;
dev_dbg(&port->dev, "parity = space\n");
} else {
buf[5] = 2;
dev_dbg(&port->dev, "parity = even\n");
}
}
} else {
buf[5] = 0;
dev_dbg(&port->dev, "parity = none\n");
}
/*
* Some PL2303 are known to lose bytes if you change serial settings
* even to the same values as before. Thus we actually need to filter
* in this specific case.
*
* Note that the tty_termios_hw_change check above is not sufficient
* as a previously requested baud rate may differ from the one
* actually used (and stored in old_termios).
*
* NOTE: No additional locking needed for line_settings as it is
* only used in set_termios, which is serialised against itself.
*/
if (!old_termios || memcmp(buf, priv->line_settings, 7)) {
ret = pl2303_set_line_request(port, buf);
if (!ret)
memcpy(priv->line_settings, buf, 7);
}
/* change control lines if we are switching to or from B0 */
spin_lock_irqsave(&priv->lock, flags);
control = priv->line_control;
if (C_BAUD(tty) == B0)
priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
else if (old_termios && (old_termios->c_cflag & CBAUD) == B0)
priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
if (control != priv->line_control) {
control = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
pl2303_set_control_lines(port, control);
} else {
spin_unlock_irqrestore(&priv->lock, flags);
}
if (C_CRTSCTS(tty)) {
if (spriv->quirks & PL2303_QUIRK_LEGACY)
pl2303_vendor_write(serial, 0x0, 0x41);
else
pl2303_vendor_write(serial, 0x0, 0x61);
} else {
pl2303_vendor_write(serial, 0x0, 0x0);
}
kfree(buf);
}
static void pl2303_dtr_rts(struct usb_serial_port *port, int on)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
u8 control;
spin_lock_irqsave(&priv->lock, flags);
if (on)
priv->line_control |= (CONTROL_DTR | CONTROL_RTS);
else
priv->line_control &= ~(CONTROL_DTR | CONTROL_RTS);
control = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
pl2303_set_control_lines(port, control);
}
static void pl2303_close(struct usb_serial_port *port)
{
usb_serial_generic_close(port);
usb_kill_urb(port->interrupt_in_urb);
pl2303_set_break(port, false);
}
static int pl2303_open(struct tty_struct *tty, struct usb_serial_port *port)
{
struct usb_serial *serial = port->serial;
struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
int result;
if (spriv->quirks & PL2303_QUIRK_LEGACY) {
usb_clear_halt(serial->dev, port->write_urb->pipe);
usb_clear_halt(serial->dev, port->read_urb->pipe);
} else {
/* reset upstream data pipes */
pl2303_vendor_write(serial, 8, 0);
pl2303_vendor_write(serial, 9, 0);
}
/* Setup termios */
if (tty)
pl2303_set_termios(tty, port, NULL);
result = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
if (result) {
dev_err(&port->dev, "failed to submit interrupt urb: %d\n",
result);
return result;
}
result = usb_serial_generic_open(tty, port);
if (result) {
usb_kill_urb(port->interrupt_in_urb);
return result;
}
return 0;
}
static int pl2303_tiocmset(struct tty_struct *tty,
unsigned int set, unsigned int clear)
{
struct usb_serial_port *port = tty->driver_data;
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
u8 control;
int ret;
spin_lock_irqsave(&priv->lock, flags);
if (set & TIOCM_RTS)
priv->line_control |= CONTROL_RTS;
if (set & TIOCM_DTR)
priv->line_control |= CONTROL_DTR;
if (clear & TIOCM_RTS)
priv->line_control &= ~CONTROL_RTS;
if (clear & TIOCM_DTR)
priv->line_control &= ~CONTROL_DTR;
control = priv->line_control;
spin_unlock_irqrestore(&priv->lock, flags);
ret = pl2303_set_control_lines(port, control);
if (ret)
return usb_translate_errors(ret);
return 0;
}
static int pl2303_tiocmget(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned long flags;
unsigned int mcr;
unsigned int status;
unsigned int result;
spin_lock_irqsave(&priv->lock, flags);
mcr = priv->line_control;
status = priv->line_status;
spin_unlock_irqrestore(&priv->lock, flags);
result = ((mcr & CONTROL_DTR) ? TIOCM_DTR : 0)
| ((mcr & CONTROL_RTS) ? TIOCM_RTS : 0)
| ((status & UART_CTS) ? TIOCM_CTS : 0)
| ((status & UART_DSR) ? TIOCM_DSR : 0)
| ((status & UART_RING) ? TIOCM_RI : 0)
| ((status & UART_DCD) ? TIOCM_CD : 0);
dev_dbg(&port->dev, "%s - result = %x\n", __func__, result);
return result;
}
static int pl2303_carrier_raised(struct usb_serial_port *port)
{
struct pl2303_private *priv = usb_get_serial_port_data(port);
if (priv->line_status & UART_DCD)
return 1;
return 0;
}
static int pl2303_ioctl(struct tty_struct *tty,
unsigned int cmd, unsigned long arg)
{
struct serial_struct ser;
struct usb_serial_port *port = tty->driver_data;
switch (cmd) {
case TIOCGSERIAL:
memset(&ser, 0, sizeof ser);
ser.type = PORT_16654;
ser.line = port->minor;
ser.port = port->port_number;
ser.baud_base = 460800;
if (copy_to_user((void __user *)arg, &ser, sizeof ser))
return -EFAULT;
return 0;
default:
break;
}
return -ENOIOCTLCMD;
}
static void pl2303_set_break(struct usb_serial_port *port, bool enable)
{
struct usb_serial *serial = port->serial;
u16 state;
int result;
if (enable)
state = BREAK_ON;
else
state = BREAK_OFF;
dev_dbg(&port->dev, "%s - turning break %s\n", __func__,
state == BREAK_OFF ? "off" : "on");
result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
BREAK_REQUEST, BREAK_REQUEST_TYPE, state,
0, NULL, 0, 100);
if (result)
dev_err(&port->dev, "error sending break = %d\n", result);
}
static void pl2303_break_ctl(struct tty_struct *tty, int state)
{
struct usb_serial_port *port = tty->driver_data;
pl2303_set_break(port, state);
}
static void pl2303_update_line_status(struct usb_serial_port *port,
unsigned char *data,
unsigned int actual_length)
{
struct usb_serial *serial = port->serial;
struct pl2303_serial_private *spriv = usb_get_serial_data(serial);
struct pl2303_private *priv = usb_get_serial_port_data(port);
struct tty_struct *tty;
unsigned long flags;
unsigned int status_idx = UART_STATE_INDEX;
u8 status;
u8 delta;
if (spriv->quirks & PL2303_QUIRK_UART_STATE_IDX0)
status_idx = 0;
if (actual_length < status_idx + 1)
return;
status = data[status_idx];
/* Save off the uart status for others to look at */
spin_lock_irqsave(&priv->lock, flags);
delta = priv->line_status ^ status;
priv->line_status = status;
spin_unlock_irqrestore(&priv->lock, flags);
if (status & UART_BREAK_ERROR)
usb_serial_handle_break(port);
if (delta & UART_STATE_MSR_MASK) {
if (delta & UART_CTS)
port->icount.cts++;
if (delta & UART_DSR)
port->icount.dsr++;
if (delta & UART_RING)
port->icount.rng++;
if (delta & UART_DCD) {
port->icount.dcd++;
tty = tty_port_tty_get(&port->port);
if (tty) {
usb_serial_handle_dcd_change(port, tty,
status & UART_DCD);
tty_kref_put(tty);
}
}
wake_up_interruptible(&port->port.delta_msr_wait);
}
}
static void pl2303_read_int_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
unsigned char *data = urb->transfer_buffer;
unsigned int actual_length = urb->actual_length;
int status = urb->status;
int retval;
switch (status) {
case 0:
/* success */
break;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
/* this urb is terminated, clean up */
dev_dbg(&port->dev, "%s - urb shutting down with status: %d\n",
__func__, status);
return;
default:
dev_dbg(&port->dev, "%s - nonzero urb status received: %d\n",
__func__, status);
goto exit;
}
usb_serial_debug_data(&port->dev, __func__,
urb->actual_length, urb->transfer_buffer);
pl2303_update_line_status(port, data, actual_length);
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
if (retval) {
dev_err(&port->dev,
"%s - usb_submit_urb failed with result %d\n",
__func__, retval);
}
}
static void pl2303_process_read_urb(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
struct pl2303_private *priv = usb_get_serial_port_data(port);
unsigned char *data = urb->transfer_buffer;
char tty_flag = TTY_NORMAL;
unsigned long flags;
u8 line_status;
int i;
/* update line status */
spin_lock_irqsave(&priv->lock, flags);
line_status = priv->line_status;
priv->line_status &= ~UART_STATE_TRANSIENT_MASK;
spin_unlock_irqrestore(&priv->lock, flags);
if (!urb->actual_length)
return;
/*
* Break takes precedence over parity, which takes precedence over
* framing errors.
*/
if (line_status & UART_BREAK_ERROR)
tty_flag = TTY_BREAK;
else if (line_status & UART_PARITY_ERROR)
tty_flag = TTY_PARITY;
else if (line_status & UART_FRAME_ERROR)
tty_flag = TTY_FRAME;
if (tty_flag != TTY_NORMAL)
dev_dbg(&port->dev, "%s - tty_flag = %d\n", __func__,
tty_flag);
/* overrun is special, not associated with a char */
if (line_status & UART_OVERRUN_ERROR)
tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
if (port->port.console && port->sysrq) {
for (i = 0; i < urb->actual_length; ++i)
if (!usb_serial_handle_sysrq_char(port, data[i]))
tty_insert_flip_char(&port->port, data[i],
tty_flag);
} else {
tty_insert_flip_string_fixed_flag(&port->port, data, tty_flag,
urb->actual_length);
}
tty_flip_buffer_push(&port->port);
}
static struct usb_serial_driver pl2303_device = {
.driver = {
.owner = THIS_MODULE,
.name = "pl2303",
},
.id_table = id_table,
.num_ports = 1,
.bulk_in_size = 256,
.bulk_out_size = 256,
.open = pl2303_open,
.close = pl2303_close,
.dtr_rts = pl2303_dtr_rts,
.carrier_raised = pl2303_carrier_raised,
.ioctl = pl2303_ioctl,
.break_ctl = pl2303_break_ctl,
.set_termios = pl2303_set_termios,
.tiocmget = pl2303_tiocmget,
.tiocmset = pl2303_tiocmset,
.tiocmiwait = usb_serial_generic_tiocmiwait,
.process_read_urb = pl2303_process_read_urb,
.read_int_callback = pl2303_read_int_callback,
.probe = pl2303_probe,
.attach = pl2303_startup,
.release = pl2303_release,
.port_probe = pl2303_port_probe,
.port_remove = pl2303_port_remove,
};
static struct usb_serial_driver * const serial_drivers[] = {
&pl2303_device, NULL
};
module_usb_serial_driver(serial_drivers, id_table);
MODULE_DESCRIPTION("Prolific PL2303 USB to serial adaptor driver");
MODULE_LICENSE("GPL");