- 根目录:
- drivers
- staging
- wlan-ng
- prism2fw.c
/* from src/prism2/download/prism2dl.c
*
* utility for downloading prism2 images moved into kernelspace
*
* Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
* --------------------------------------------------------------------
*
* linux-wlan
*
* The contents of this file are subject to the Mozilla Public
* License Version 1.1 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS
* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
* implied. See the License for the specific language governing
* rights and limitations under the License.
*
* Alternatively, the contents of this file may be used under the
* terms of the GNU Public License version 2 (the "GPL"), in which
* case the provisions of the GPL are applicable instead of the
* above. If you wish to allow the use of your version of this file
* only under the terms of the GPL and not to allow others to use
* your version of this file under the MPL, indicate your decision
* by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL. If you do not delete
* the provisions above, a recipient may use your version of this
* file under either the MPL or the GPL.
*
* --------------------------------------------------------------------
*
* Inquiries regarding the linux-wlan Open Source project can be
* made directly to:
*
* AbsoluteValue Systems Inc.
* info@linux-wlan.com
* http://www.linux-wlan.com
*
* --------------------------------------------------------------------
*
* Portions of the development of this software were funded by
* Intersil Corporation as part of PRISM(R) chipset product development.
*
* --------------------------------------------------------------------
*/
/*================================================================*/
/* System Includes */
#include <linux/ihex.h>
#include <linux/slab.h>
/*================================================================*/
/* Local Constants */
#define PRISM2_USB_FWFILE "prism2_ru.fw"
MODULE_FIRMWARE(PRISM2_USB_FWFILE);
#define S3DATA_MAX 5000
#define S3PLUG_MAX 200
#define S3CRC_MAX 200
#define S3INFO_MAX 50
#define S3ADDR_PLUG (0xff000000UL)
#define S3ADDR_CRC (0xff100000UL)
#define S3ADDR_INFO (0xff200000UL)
#define S3ADDR_START (0xff400000UL)
#define CHUNKS_MAX 100
#define WRITESIZE_MAX 4096
/*================================================================*/
/* Local Types */
struct s3datarec {
u32 len;
u32 addr;
u8 checksum;
u8 *data;
};
struct s3plugrec {
u32 itemcode;
u32 addr;
u32 len;
};
struct s3crcrec {
u32 addr;
u32 len;
unsigned int dowrite;
};
struct s3inforec {
u16 len;
u16 type;
union {
hfa384x_compident_t version;
hfa384x_caplevel_t compat;
u16 buildseq;
hfa384x_compident_t platform;
} info;
};
struct pda {
u8 buf[HFA384x_PDA_LEN_MAX];
hfa384x_pdrec_t *rec[HFA384x_PDA_RECS_MAX];
unsigned int nrec;
};
struct imgchunk {
u32 addr; /* start address */
u32 len; /* in bytes */
u16 crc; /* CRC value (if it falls at a chunk boundary) */
u8 *data;
};
/*================================================================*/
/* Local Static Definitions */
/*----------------------------------------------------------------*/
/* s-record image processing */
/* Data records */
static unsigned int ns3data;
static struct s3datarec s3data[S3DATA_MAX];
/* Plug records */
static unsigned int ns3plug;
static struct s3plugrec s3plug[S3PLUG_MAX];
/* CRC records */
static unsigned int ns3crc;
static struct s3crcrec s3crc[S3CRC_MAX];
/* Info records */
static unsigned int ns3info;
static struct s3inforec s3info[S3INFO_MAX];
/* S7 record (there _better_ be only one) */
static u32 startaddr;
/* Load image chunks */
static unsigned int nfchunks;
static struct imgchunk fchunk[CHUNKS_MAX];
/* Note that for the following pdrec_t arrays, the len and code */
/* fields are stored in HOST byte order. The mkpdrlist() function */
/* does the conversion. */
/*----------------------------------------------------------------*/
/* PDA, built from [card|newfile]+[addfile1+addfile2...] */
static struct pda pda;
static hfa384x_compident_t nicid;
static hfa384x_caplevel_t rfid;
static hfa384x_caplevel_t macid;
static hfa384x_caplevel_t priid;
/*================================================================*/
/* Local Function Declarations */
static int prism2_fwapply(const struct ihex_binrec *rfptr,
wlandevice_t *wlandev);
static int read_fwfile(const struct ihex_binrec *rfptr);
static int mkimage(struct imgchunk *clist, unsigned int *ccnt);
static int read_cardpda(struct pda *pda, wlandevice_t *wlandev);
static int mkpdrlist(struct pda *pda);
static int plugimage(struct imgchunk *fchunk, unsigned int nfchunks,
struct s3plugrec *s3plug, unsigned int ns3plug, struct pda *pda);
static int crcimage(struct imgchunk *fchunk, unsigned int nfchunks,
struct s3crcrec *s3crc, unsigned int ns3crc);
static int writeimage(wlandevice_t *wlandev, struct imgchunk *fchunk,
unsigned int nfchunks);
static void free_chunks(struct imgchunk *fchunk, unsigned int *nfchunks);
static void free_srecs(void);
static int validate_identity(void);
/*================================================================*/
/* Function Definitions */
/*----------------------------------------------------------------
* prism2_fwtry
*
* Try and get firmware into memory
*
* Arguments:
* udev usb device structure
* wlandev wlan device structure
*
* Returns:
* 0 - success
* ~0 - failure
----------------------------------------------------------------*/
static int prism2_fwtry(struct usb_device *udev, wlandevice_t *wlandev)
{
const struct firmware *fw_entry = NULL;
netdev_info(wlandev->netdev, "prism2_usb: Checking for firmware %s\n",
PRISM2_USB_FWFILE);
if (request_ihex_firmware(&fw_entry,
PRISM2_USB_FWFILE, &udev->dev) != 0) {
netdev_info(wlandev->netdev,
"prism2_usb: Firmware not available, but not essential\n");
netdev_info(wlandev->netdev,
"prism2_usb: can continue to use card anyway.\n");
return 1;
}
netdev_info(wlandev->netdev,
"prism2_usb: %s will be processed, size %zu\n",
PRISM2_USB_FWFILE, fw_entry->size);
prism2_fwapply((const struct ihex_binrec *)fw_entry->data, wlandev);
release_firmware(fw_entry);
return 0;
}
/*----------------------------------------------------------------
* prism2_fwapply
*
* Apply the firmware loaded into memory
*
* Arguments:
* rfptr firmware image in kernel memory
* wlandev device
*
* Returns:
* 0 - success
* ~0 - failure
----------------------------------------------------------------*/
static int prism2_fwapply(const struct ihex_binrec *rfptr,
wlandevice_t *wlandev)
{
signed int result = 0;
struct p80211msg_dot11req_mibget getmsg;
p80211itemd_t *item;
u32 *data;
/* Initialize the data structures */
ns3data = 0;
memset(s3data, 0, sizeof(s3data));
ns3plug = 0;
memset(s3plug, 0, sizeof(s3plug));
ns3crc = 0;
memset(s3crc, 0, sizeof(s3crc));
ns3info = 0;
memset(s3info, 0, sizeof(s3info));
startaddr = 0;
nfchunks = 0;
memset(fchunk, 0, sizeof(fchunk));
memset(&nicid, 0, sizeof(nicid));
memset(&rfid, 0, sizeof(rfid));
memset(&macid, 0, sizeof(macid));
memset(&priid, 0, sizeof(priid));
/* clear the pda and add an initial END record */
memset(&pda, 0, sizeof(pda));
pda.rec[0] = (hfa384x_pdrec_t *) pda.buf;
pda.rec[0]->len = cpu_to_le16(2); /* len in words */
pda.rec[0]->code = cpu_to_le16(HFA384x_PDR_END_OF_PDA);
pda.nrec = 1;
/*-----------------------------------------------------*/
/* Put card into fwload state */
prism2sta_ifstate(wlandev, P80211ENUM_ifstate_fwload);
/* Build the PDA we're going to use. */
if (read_cardpda(&pda, wlandev)) {
netdev_err(wlandev->netdev, "load_cardpda failed, exiting.\n");
return 1;
}
/* read the card's PRI-SUP */
memset(&getmsg, 0, sizeof(getmsg));
getmsg.msgcode = DIDmsg_dot11req_mibget;
getmsg.msglen = sizeof(getmsg);
strcpy(getmsg.devname, wlandev->name);
getmsg.mibattribute.did = DIDmsg_dot11req_mibget_mibattribute;
getmsg.mibattribute.status = P80211ENUM_msgitem_status_data_ok;
getmsg.resultcode.did = DIDmsg_dot11req_mibget_resultcode;
getmsg.resultcode.status = P80211ENUM_msgitem_status_no_value;
item = (p80211itemd_t *) getmsg.mibattribute.data;
item->did = DIDmib_p2_p2NIC_p2PRISupRange;
item->status = P80211ENUM_msgitem_status_no_value;
data = (u32 *) item->data;
/* DIDmsg_dot11req_mibget */
prism2mgmt_mibset_mibget(wlandev, &getmsg);
if (getmsg.resultcode.data != P80211ENUM_resultcode_success)
netdev_err(wlandev->netdev, "Couldn't fetch PRI-SUP info\n");
/* Already in host order */
priid.role = *data++;
priid.id = *data++;
priid.variant = *data++;
priid.bottom = *data++;
priid.top = *data++;
/* Read the S3 file */
result = read_fwfile(rfptr);
if (result) {
netdev_err(wlandev->netdev,
"Failed to read the data exiting.\n");
return 1;
}
result = validate_identity();
if (result) {
netdev_err(wlandev->netdev, "Incompatible firmware image.\n");
return 1;
}
if (startaddr == 0x00000000) {
netdev_err(wlandev->netdev,
"Can't RAM download a Flash image!\n");
return 1;
}
/* Make the image chunks */
result = mkimage(fchunk, &nfchunks);
/* Do any plugging */
result = plugimage(fchunk, nfchunks, s3plug, ns3plug, &pda);
if (result) {
netdev_err(wlandev->netdev, "Failed to plug data.\n");
return 1;
}
/* Insert any CRCs */
if (crcimage(fchunk, nfchunks, s3crc, ns3crc)) {
netdev_err(wlandev->netdev, "Failed to insert all CRCs\n");
return 1;
}
/* Write the image */
result = writeimage(wlandev, fchunk, nfchunks);
if (result) {
netdev_err(wlandev->netdev, "Failed to ramwrite image data.\n");
return 1;
}
/* clear any allocated memory */
free_chunks(fchunk, &nfchunks);
free_srecs();
netdev_info(wlandev->netdev, "prism2_usb: firmware loading finished.\n");
return result;
}
/*----------------------------------------------------------------
* crcimage
*
* Adds a CRC16 in the two bytes prior to each block identified by
* an S3 CRC record. Currently, we don't actually do a CRC we just
* insert the value 0xC0DE in hfa384x order.
*
* Arguments:
* fchunk Array of image chunks
* nfchunks Number of image chunks
* s3crc Array of crc records
* ns3crc Number of crc records
*
* Returns:
* 0 success
* ~0 failure
----------------------------------------------------------------*/
static int crcimage(struct imgchunk *fchunk, unsigned int nfchunks,
struct s3crcrec *s3crc, unsigned int ns3crc)
{
int result = 0;
int i;
int c;
u32 crcstart;
u32 crcend;
u32 cstart = 0;
u32 cend;
u8 *dest;
u32 chunkoff;
for (i = 0; i < ns3crc; i++) {
if (!s3crc[i].dowrite)
continue;
crcstart = s3crc[i].addr;
crcend = s3crc[i].addr + s3crc[i].len;
/* Find chunk */
for (c = 0; c < nfchunks; c++) {
cstart = fchunk[c].addr;
cend = fchunk[c].addr + fchunk[c].len;
/* the line below does an address & len match search */
/* unfortunately, I've found that the len fields of */
/* some crc records don't match with the length of */
/* the actual data, so we're not checking right now */
/* if (crcstart-2 >= cstart && crcend <= cend) break; */
/* note the -2 below, it's to make sure the chunk has */
/* space for the CRC value */
if (crcstart - 2 >= cstart && crcstart < cend)
break;
}
if (c >= nfchunks) {
pr_err("Failed to find chunk for crcrec[%d], addr=0x%06x len=%d , aborting crc.\n",
i, s3crc[i].addr, s3crc[i].len);
return 1;
}
/* Insert crc */
pr_debug("Adding crc @ 0x%06x\n", s3crc[i].addr - 2);
chunkoff = crcstart - cstart - 2;
dest = fchunk[c].data + chunkoff;
*dest = 0xde;
*(dest + 1) = 0xc0;
}
return result;
}
/*----------------------------------------------------------------
* free_chunks
*
* Clears the chunklist data structures in preparation for a new file.
*
* Arguments:
* none
*
* Returns:
* nothing
----------------------------------------------------------------*/
static void free_chunks(struct imgchunk *fchunk, unsigned int *nfchunks)
{
int i;
for (i = 0; i < *nfchunks; i++)
kfree(fchunk[i].data);
*nfchunks = 0;
memset(fchunk, 0, sizeof(*fchunk));
}
/*----------------------------------------------------------------
* free_srecs
*
* Clears the srec data structures in preparation for a new file.
*
* Arguments:
* none
*
* Returns:
* nothing
----------------------------------------------------------------*/
static void free_srecs(void)
{
ns3data = 0;
memset(s3data, 0, sizeof(s3data));
ns3plug = 0;
memset(s3plug, 0, sizeof(s3plug));
ns3crc = 0;
memset(s3crc, 0, sizeof(s3crc));
ns3info = 0;
memset(s3info, 0, sizeof(s3info));
startaddr = 0;
}
/*----------------------------------------------------------------
* mkimage
*
* Scans the currently loaded set of S records for data residing
* in contiguous memory regions. Each contiguous region is then
* made into a 'chunk'. This function assumes that we're building
* a new chunk list. Assumes the s3data items are in sorted order.
*
* Arguments: none
*
* Returns:
* 0 - success
* ~0 - failure (probably an errno)
----------------------------------------------------------------*/
static int mkimage(struct imgchunk *clist, unsigned int *ccnt)
{
int result = 0;
int i;
int j;
int currchunk = 0;
u32 nextaddr = 0;
u32 s3start;
u32 s3end;
u32 cstart = 0;
u32 cend;
u32 coffset;
/* There may already be data in the chunklist */
*ccnt = 0;
/* Establish the location and size of each chunk */
for (i = 0; i < ns3data; i++) {
if (s3data[i].addr == nextaddr) {
/* existing chunk, grow it */
clist[currchunk].len += s3data[i].len;
nextaddr += s3data[i].len;
} else {
/* New chunk */
(*ccnt)++;
currchunk = *ccnt - 1;
clist[currchunk].addr = s3data[i].addr;
clist[currchunk].len = s3data[i].len;
nextaddr = s3data[i].addr + s3data[i].len;
/* Expand the chunk if there is a CRC record at */
/* their beginning bound */
for (j = 0; j < ns3crc; j++) {
if (s3crc[j].dowrite &&
s3crc[j].addr == clist[currchunk].addr) {
clist[currchunk].addr -= 2;
clist[currchunk].len += 2;
}
}
}
}
/* We're currently assuming there aren't any overlapping chunks */
/* if this proves false, we'll need to add code to coalesce. */
/* Allocate buffer space for chunks */
for (i = 0; i < *ccnt; i++) {
clist[i].data = kzalloc(clist[i].len, GFP_KERNEL);
if (clist[i].data == NULL) {
pr_err("failed to allocate image space, exitting.\n");
return 1;
}
pr_debug("chunk[%d]: addr=0x%06x len=%d\n",
i, clist[i].addr, clist[i].len);
}
/* Copy srec data to chunks */
for (i = 0; i < ns3data; i++) {
s3start = s3data[i].addr;
s3end = s3start + s3data[i].len - 1;
for (j = 0; j < *ccnt; j++) {
cstart = clist[j].addr;
cend = cstart + clist[j].len - 1;
if (s3start >= cstart && s3end <= cend)
break;
}
if (((unsigned int)j) >= (*ccnt)) {
pr_err("s3rec(a=0x%06x,l=%d), no chunk match, exiting.\n",
s3start, s3data[i].len);
return 1;
}
coffset = s3start - cstart;
memcpy(clist[j].data + coffset, s3data[i].data, s3data[i].len);
}
return result;
}
/*----------------------------------------------------------------
* mkpdrlist
*
* Reads a raw PDA and builds an array of pdrec_t structures.
*
* Arguments:
* pda buffer containing raw PDA bytes
* pdrec ptr to an array of pdrec_t's. Will be filled on exit.
* nrec ptr to a variable that will contain the count of PDRs
*
* Returns:
* 0 - success
* ~0 - failure (probably an errno)
----------------------------------------------------------------*/
static int mkpdrlist(struct pda *pda)
{
int result = 0;
u16 *pda16 = (u16 *) pda->buf;
int curroff; /* in 'words' */
pda->nrec = 0;
curroff = 0;
while (curroff < (HFA384x_PDA_LEN_MAX / 2) &&
le16_to_cpu(pda16[curroff + 1]) != HFA384x_PDR_END_OF_PDA) {
pda->rec[pda->nrec] = (hfa384x_pdrec_t *) &(pda16[curroff]);
if (le16_to_cpu(pda->rec[pda->nrec]->code) ==
HFA384x_PDR_NICID) {
memcpy(&nicid, &pda->rec[pda->nrec]->data.nicid,
sizeof(nicid));
nicid.id = le16_to_cpu(nicid.id);
nicid.variant = le16_to_cpu(nicid.variant);
nicid.major = le16_to_cpu(nicid.major);
nicid.minor = le16_to_cpu(nicid.minor);
}
if (le16_to_cpu(pda->rec[pda->nrec]->code) ==
HFA384x_PDR_MFISUPRANGE) {
memcpy(&rfid, &pda->rec[pda->nrec]->data.mfisuprange,
sizeof(rfid));
rfid.id = le16_to_cpu(rfid.id);
rfid.variant = le16_to_cpu(rfid.variant);
rfid.bottom = le16_to_cpu(rfid.bottom);
rfid.top = le16_to_cpu(rfid.top);
}
if (le16_to_cpu(pda->rec[pda->nrec]->code) ==
HFA384x_PDR_CFISUPRANGE) {
memcpy(&macid, &pda->rec[pda->nrec]->data.cfisuprange,
sizeof(macid));
macid.id = le16_to_cpu(macid.id);
macid.variant = le16_to_cpu(macid.variant);
macid.bottom = le16_to_cpu(macid.bottom);
macid.top = le16_to_cpu(macid.top);
}
(pda->nrec)++;
curroff += le16_to_cpu(pda16[curroff]) + 1;
}
if (curroff >= (HFA384x_PDA_LEN_MAX / 2)) {
pr_err("no end record found or invalid lengths in PDR data, exiting. %x %d\n",
curroff, pda->nrec);
return 1;
}
if (le16_to_cpu(pda16[curroff + 1]) == HFA384x_PDR_END_OF_PDA) {
pda->rec[pda->nrec] = (hfa384x_pdrec_t *) &(pda16[curroff]);
(pda->nrec)++;
}
return result;
}
/*----------------------------------------------------------------
* plugimage
*
* Plugs the given image using the given plug records from the given
* PDA and filename.
*
* Arguments:
* fchunk Array of image chunks
* nfchunks Number of image chunks
* s3plug Array of plug records
* ns3plug Number of plug records
* pda Current pda data
*
* Returns:
* 0 success
* ~0 failure
----------------------------------------------------------------*/
static int plugimage(struct imgchunk *fchunk, unsigned int nfchunks,
struct s3plugrec *s3plug, unsigned int ns3plug, struct pda *pda)
{
int result = 0;
int i; /* plug index */
int j; /* index of PDR or -1 if fname plug */
int c; /* chunk index */
u32 pstart;
u32 pend;
u32 cstart = 0;
u32 cend;
u32 chunkoff;
u8 *dest;
/* for each plug record */
for (i = 0; i < ns3plug; i++) {
pstart = s3plug[i].addr;
pend = s3plug[i].addr + s3plug[i].len;
/* find the matching PDR (or filename) */
if (s3plug[i].itemcode != 0xffffffffUL) { /* not filename */
for (j = 0; j < pda->nrec; j++) {
if (s3plug[i].itemcode ==
le16_to_cpu(pda->rec[j]->code))
break;
}
} else {
j = -1;
}
if (j >= pda->nrec && j != -1) { /* if no matching PDR, fail */
pr_warn("warning: Failed to find PDR for plugrec 0x%04x.\n",
s3plug[i].itemcode);
continue; /* and move on to the next PDR */
#if 0
/* MSM: They swear that unless it's the MAC address,
* the serial number, or the TX calibration records,
* then there's reasonable defaults in the f/w
* image. Therefore, missing PDRs in the card
* should only be a warning, not fatal.
* TODO: add fatals for the PDRs mentioned above.
*/
result = 1;
continue;
#endif
}
/* Validate plug len against PDR len */
if (j != -1 && s3plug[i].len < le16_to_cpu(pda->rec[j]->len)) {
pr_err("error: Plug vs. PDR len mismatch for plugrec 0x%04x, abort plugging.\n",
s3plug[i].itemcode);
result = 1;
continue;
}
/* Validate plug address against chunk data and identify chunk */
for (c = 0; c < nfchunks; c++) {
cstart = fchunk[c].addr;
cend = fchunk[c].addr + fchunk[c].len;
if (pstart >= cstart && pend <= cend)
break;
}
if (c >= nfchunks) {
pr_err("error: Failed to find image chunk for plugrec 0x%04x.\n",
s3plug[i].itemcode);
result = 1;
continue;
}
/* Plug data */
chunkoff = pstart - cstart;
dest = fchunk[c].data + chunkoff;
pr_debug("Plugging item 0x%04x @ 0x%06x, len=%d, cnum=%d coff=0x%06x\n",
s3plug[i].itemcode, pstart, s3plug[i].len,
c, chunkoff);
if (j == -1) { /* plug the filename */
memset(dest, 0, s3plug[i].len);
strncpy(dest, PRISM2_USB_FWFILE, s3plug[i].len - 1);
} else { /* plug a PDR */
memcpy(dest, &(pda->rec[j]->data), s3plug[i].len);
}
}
return result;
}
/*----------------------------------------------------------------
* read_cardpda
*
* Sends the command for the driver to read the pda from the card
* named in the device variable. Upon success, the card pda is
* stored in the "cardpda" variables. Note that the pda structure
* is considered 'well formed' after this function. That means
* that the nrecs is valid, the rec array has been set up, and there's
* a valid PDAEND record in the raw PDA data.
*
* Arguments:
* pda pda structure
* wlandev device
*
* Returns:
* 0 - success
* ~0 - failure (probably an errno)
----------------------------------------------------------------*/
static int read_cardpda(struct pda *pda, wlandevice_t *wlandev)
{
int result = 0;
struct p80211msg_p2req_readpda *msg;
msg = kzalloc(sizeof(*msg), GFP_KERNEL);
if (!msg)
return -ENOMEM;
/* set up the msg */
msg->msgcode = DIDmsg_p2req_readpda;
msg->msglen = sizeof(msg);
strcpy(msg->devname, wlandev->name);
msg->pda.did = DIDmsg_p2req_readpda_pda;
msg->pda.len = HFA384x_PDA_LEN_MAX;
msg->pda.status = P80211ENUM_msgitem_status_no_value;
msg->resultcode.did = DIDmsg_p2req_readpda_resultcode;
msg->resultcode.len = sizeof(u32);
msg->resultcode.status = P80211ENUM_msgitem_status_no_value;
if (prism2mgmt_readpda(wlandev, msg) != 0) {
/* prism2mgmt_readpda prints an errno if appropriate */
result = -1;
} else if (msg->resultcode.data == P80211ENUM_resultcode_success) {
memcpy(pda->buf, msg->pda.data, HFA384x_PDA_LEN_MAX);
result = mkpdrlist(pda);
} else {
/* resultcode must've been something other than success */
result = -1;
}
kfree(msg);
return result;
}
/*----------------------------------------------------------------
* read_fwfile
*
* Reads the given fw file which should have been compiled from an srec
* file. Each record in the fw file will either be a plain data record,
* a start address record, or other records used for plugging.
*
* Note that data records are expected to be sorted into
* ascending address order in the fw file.
*
* Note also that the start address record, originally an S7 record in
* the srec file, is expected in the fw file to be like a data record but
* with a certain address to make it identifiable.
*
* Here's the SREC format that the fw should have come from:
* S[37]nnaaaaaaaaddd...dddcc
*
* nn - number of bytes starting with the address field
* aaaaaaaa - address in readable (or big endian) format
* dd....dd - 0-245 data bytes (two chars per byte)
* cc - checksum
*
* The S7 record's (there should be only one) address value gets
* converted to an S3 record with address of 0xff400000, with the
* start address being stored as a 4 byte data word. That address is
* the start execution address used for RAM downloads.
*
* The S3 records have a collection of subformats indicated by the
* value of aaaaaaaa:
* 0xff000000 - Plug record, data field format:
* xxxxxxxxaaaaaaaassssssss
* x - PDR code number (little endian)
* a - Address in load image to plug (little endian)
* s - Length of plug data area (little endian)
*
* 0xff100000 - CRC16 generation record, data field format:
* aaaaaaaassssssssbbbbbbbb
* a - Start address for CRC calculation (little endian)
* s - Length of data to calculate over (little endian)
* b - Boolean, true=write crc, false=don't write
*
* 0xff200000 - Info record, data field format:
* ssssttttdd..dd
* s - Size in words (little endian)
* t - Info type (little endian), see #defines and
* struct s3inforec for details about types.
* d - (s - 1) little endian words giving the contents of
* the given info type.
*
* 0xff400000 - Start address record, data field format:
* aaaaaaaa
* a - Address in load image to plug (little endian)
*
* Arguments:
* record firmware image (ihex record structure) in kernel memory
*
* Returns:
* 0 - success
* ~0 - failure (probably an errno)
----------------------------------------------------------------*/
static int read_fwfile(const struct ihex_binrec *record)
{
int i;
int rcnt = 0;
u16 *tmpinfo;
u16 *ptr16;
u32 *ptr32, len, addr;
pr_debug("Reading fw file ...\n");
while (record) {
rcnt++;
len = be16_to_cpu(record->len);
addr = be32_to_cpu(record->addr);
/* Point into data for different word lengths */
ptr32 = (u32 *) record->data;
ptr16 = (u16 *) record->data;
/* parse what was an S3 srec and put it in the right array */
switch (addr) {
case S3ADDR_START:
startaddr = *ptr32;
pr_debug(" S7 start addr, record=%d addr=0x%08x\n",
rcnt,
startaddr);
break;
case S3ADDR_PLUG:
s3plug[ns3plug].itemcode = *ptr32;
s3plug[ns3plug].addr = *(ptr32 + 1);
s3plug[ns3plug].len = *(ptr32 + 2);
pr_debug(" S3 plugrec, record=%d itemcode=0x%08x addr=0x%08x len=%d\n",
rcnt,
s3plug[ns3plug].itemcode,
s3plug[ns3plug].addr,
s3plug[ns3plug].len);
ns3plug++;
if (ns3plug == S3PLUG_MAX) {
pr_err("S3 plugrec limit reached - aborting\n");
return 1;
}
break;
case S3ADDR_CRC:
s3crc[ns3crc].addr = *ptr32;
s3crc[ns3crc].len = *(ptr32 + 1);
s3crc[ns3crc].dowrite = *(ptr32 + 2);
pr_debug(" S3 crcrec, record=%d addr=0x%08x len=%d write=0x%08x\n",
rcnt,
s3crc[ns3crc].addr,
s3crc[ns3crc].len,
s3crc[ns3crc].dowrite);
ns3crc++;
if (ns3crc == S3CRC_MAX) {
pr_err("S3 crcrec limit reached - aborting\n");
return 1;
}
break;
case S3ADDR_INFO:
s3info[ns3info].len = *ptr16;
s3info[ns3info].type = *(ptr16 + 1);
pr_debug(" S3 inforec, record=%d len=0x%04x type=0x%04x\n",
rcnt,
s3info[ns3info].len,
s3info[ns3info].type);
if (((s3info[ns3info].len - 1) * sizeof(u16)) > sizeof(s3info[ns3info].info)) {
pr_err("S3 inforec length too long - aborting\n");
return 1;
}
tmpinfo = (u16 *)&(s3info[ns3info].info.version);
pr_debug(" info=");
for (i = 0; i < s3info[ns3info].len - 1; i++) {
tmpinfo[i] = *(ptr16 + 2 + i);
pr_debug("%04x ", tmpinfo[i]);
}
pr_debug("\n");
ns3info++;
if (ns3info == S3INFO_MAX) {
pr_err("S3 inforec limit reached - aborting\n");
return 1;
}
break;
default: /* Data record */
s3data[ns3data].addr = addr;
s3data[ns3data].len = len;
s3data[ns3data].data = (uint8_t *) record->data;
ns3data++;
if (ns3data == S3DATA_MAX) {
pr_err("S3 datarec limit reached - aborting\n");
return 1;
}
break;
}
record = ihex_next_binrec(record);
}
return 0;
}
/*----------------------------------------------------------------
* writeimage
*
* Takes the chunks, builds p80211 messages and sends them down
* to the driver for writing to the card.
*
* Arguments:
* wlandev device
* fchunk Array of image chunks
* nfchunks Number of image chunks
*
* Returns:
* 0 success
* ~0 failure
----------------------------------------------------------------*/
static int writeimage(wlandevice_t *wlandev, struct imgchunk *fchunk,
unsigned int nfchunks)
{
int result = 0;
struct p80211msg_p2req_ramdl_state *rstmsg;
struct p80211msg_p2req_ramdl_write *rwrmsg;
u32 resultcode;
int i;
int j;
unsigned int nwrites;
u32 curroff;
u32 currlen;
u32 currdaddr;
rstmsg = kzalloc(sizeof(*rstmsg), GFP_KERNEL);
rwrmsg = kzalloc(sizeof(*rwrmsg), GFP_KERNEL);
if (!rstmsg || !rwrmsg) {
kfree(rstmsg);
kfree(rwrmsg);
netdev_err(wlandev->netdev,
"writeimage: no memory for firmware download, aborting download\n");
return -ENOMEM;
}
/* Initialize the messages */
strcpy(rstmsg->devname, wlandev->name);
rstmsg->msgcode = DIDmsg_p2req_ramdl_state;
rstmsg->msglen = sizeof(*rstmsg);
rstmsg->enable.did = DIDmsg_p2req_ramdl_state_enable;
rstmsg->exeaddr.did = DIDmsg_p2req_ramdl_state_exeaddr;
rstmsg->resultcode.did = DIDmsg_p2req_ramdl_state_resultcode;
rstmsg->enable.status = P80211ENUM_msgitem_status_data_ok;
rstmsg->exeaddr.status = P80211ENUM_msgitem_status_data_ok;
rstmsg->resultcode.status = P80211ENUM_msgitem_status_no_value;
rstmsg->enable.len = sizeof(u32);
rstmsg->exeaddr.len = sizeof(u32);
rstmsg->resultcode.len = sizeof(u32);
strcpy(rwrmsg->devname, wlandev->name);
rwrmsg->msgcode = DIDmsg_p2req_ramdl_write;
rwrmsg->msglen = sizeof(*rwrmsg);
rwrmsg->addr.did = DIDmsg_p2req_ramdl_write_addr;
rwrmsg->len.did = DIDmsg_p2req_ramdl_write_len;
rwrmsg->data.did = DIDmsg_p2req_ramdl_write_data;
rwrmsg->resultcode.did = DIDmsg_p2req_ramdl_write_resultcode;
rwrmsg->addr.status = P80211ENUM_msgitem_status_data_ok;
rwrmsg->len.status = P80211ENUM_msgitem_status_data_ok;
rwrmsg->data.status = P80211ENUM_msgitem_status_data_ok;
rwrmsg->resultcode.status = P80211ENUM_msgitem_status_no_value;
rwrmsg->addr.len = sizeof(u32);
rwrmsg->len.len = sizeof(u32);
rwrmsg->data.len = WRITESIZE_MAX;
rwrmsg->resultcode.len = sizeof(u32);
/* Send xxx_state(enable) */
pr_debug("Sending dl_state(enable) message.\n");
rstmsg->enable.data = P80211ENUM_truth_true;
rstmsg->exeaddr.data = startaddr;
result = prism2mgmt_ramdl_state(wlandev, rstmsg);
if (result) {
netdev_err(wlandev->netdev,
"writeimage state enable failed w/ result=%d, aborting download\n",
result);
goto free_result;
}
resultcode = rstmsg->resultcode.data;
if (resultcode != P80211ENUM_resultcode_success) {
netdev_err(wlandev->netdev,
"writeimage()->xxxdl_state msg indicates failure, w/ resultcode=%d, aborting download.\n",
resultcode);
result = 1;
goto free_result;
}
/* Now, loop through the data chunks and send WRITESIZE_MAX data */
for (i = 0; i < nfchunks; i++) {
nwrites = fchunk[i].len / WRITESIZE_MAX;
nwrites += (fchunk[i].len % WRITESIZE_MAX) ? 1 : 0;
curroff = 0;
for (j = 0; j < nwrites; j++) {
/* TODO Move this to a separate function */
int lenleft = fchunk[i].len - (WRITESIZE_MAX * j);
if (fchunk[i].len > WRITESIZE_MAX)
currlen = WRITESIZE_MAX;
else
currlen = lenleft;
curroff = j * WRITESIZE_MAX;
currdaddr = fchunk[i].addr + curroff;
/* Setup the message */
rwrmsg->addr.data = currdaddr;
rwrmsg->len.data = currlen;
memcpy(rwrmsg->data.data,
fchunk[i].data + curroff, currlen);
/* Send flashdl_write(pda) */
pr_debug
("Sending xxxdl_write message addr=%06x len=%d.\n",
currdaddr, currlen);
result = prism2mgmt_ramdl_write(wlandev, rwrmsg);
/* Check the results */
if (result) {
netdev_err(wlandev->netdev,
"writeimage chunk write failed w/ result=%d, aborting download\n",
result);
goto free_result;
}
resultcode = rstmsg->resultcode.data;
if (resultcode != P80211ENUM_resultcode_success) {
pr_err("writeimage()->xxxdl_write msg indicates failure, w/ resultcode=%d, aborting download.\n",
resultcode);
result = 1;
goto free_result;
}
}
}
/* Send xxx_state(disable) */
pr_debug("Sending dl_state(disable) message.\n");
rstmsg->enable.data = P80211ENUM_truth_false;
rstmsg->exeaddr.data = 0;
result = prism2mgmt_ramdl_state(wlandev, rstmsg);
if (result) {
netdev_err(wlandev->netdev,
"writeimage state disable failed w/ result=%d, aborting download\n",
result);
goto free_result;
}
resultcode = rstmsg->resultcode.data;
if (resultcode != P80211ENUM_resultcode_success) {
netdev_err(wlandev->netdev,
"writeimage()->xxxdl_state msg indicates failure, w/ resultcode=%d, aborting download.\n",
resultcode);
result = 1;
goto free_result;
}
free_result:
kfree(rstmsg);
kfree(rwrmsg);
return result;
}
static int validate_identity(void)
{
int i;
int result = 1;
int trump = 0;
pr_debug("NIC ID: %#x v%d.%d.%d\n",
nicid.id, nicid.major, nicid.minor, nicid.variant);
pr_debug("MFI ID: %#x v%d %d->%d\n",
rfid.id, rfid.variant, rfid.bottom, rfid.top);
pr_debug("CFI ID: %#x v%d %d->%d\n",
macid.id, macid.variant, macid.bottom, macid.top);
pr_debug("PRI ID: %#x v%d %d->%d\n",
priid.id, priid.variant, priid.bottom, priid.top);
for (i = 0; i < ns3info; i++) {
switch (s3info[i].type) {
case 1:
pr_debug("Version: ID %#x %d.%d.%d\n",
s3info[i].info.version.id,
s3info[i].info.version.major,
s3info[i].info.version.minor,
s3info[i].info.version.variant);
break;
case 2:
pr_debug("Compat: Role %#x Id %#x v%d %d->%d\n",
s3info[i].info.compat.role,
s3info[i].info.compat.id,
s3info[i].info.compat.variant,
s3info[i].info.compat.bottom,
s3info[i].info.compat.top);
/* MAC compat range */
if ((s3info[i].info.compat.role == 1) &&
(s3info[i].info.compat.id == 2)) {
if (s3info[i].info.compat.variant !=
macid.variant) {
result = 2;
}
}
/* PRI compat range */
if ((s3info[i].info.compat.role == 1) &&
(s3info[i].info.compat.id == 3)) {
if ((s3info[i].info.compat.bottom > priid.top)
|| (s3info[i].info.compat.top <
priid.bottom)) {
result = 3;
}
}
/* SEC compat range */
if ((s3info[i].info.compat.role == 1) &&
(s3info[i].info.compat.id == 4)) {
/* FIXME: isn't something missing here? */
}
break;
case 3:
pr_debug("Seq: %#x\n", s3info[i].info.buildseq);
break;
case 4:
pr_debug("Platform: ID %#x %d.%d.%d\n",
s3info[i].info.version.id,
s3info[i].info.version.major,
s3info[i].info.version.minor,
s3info[i].info.version.variant);
if (nicid.id != s3info[i].info.version.id)
continue;
if (nicid.major != s3info[i].info.version.major)
continue;
if (nicid.minor != s3info[i].info.version.minor)
continue;
if ((nicid.variant != s3info[i].info.version.variant) &&
(nicid.id != 0x8008))
continue;
trump = 1;
break;
case 0x8001:
pr_debug("name inforec len %d\n", s3info[i].len);
break;
default:
pr_debug("Unknown inforec type %d\n", s3info[i].type);
}
}
/* walk through */
if (trump && (result != 2))
result = 0;
return result;
}