- 根目录:
- drivers
- staging
- sm750fb
- sm750_hw.c
#include <linux/version.h>
#include<linux/module.h>
#include<linux/kernel.h>
#include<linux/errno.h>
#include<linux/string.h>
#include<linux/mm.h>
#include<linux/slab.h>
#include<linux/delay.h>
#include<linux/fb.h>
#include<linux/ioport.h>
#include<linux/init.h>
#include<linux/pci.h>
#include<linux/vmalloc.h>
#include<linux/pagemap.h>
#include <linux/console.h>
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif
#include<linux/platform_device.h>
#include<linux/screen_info.h>
#include "sm750.h"
#include "sm750_hw.h"
#include "ddk750.h"
#include "sm750_accel.h"
int hw_sm750_map(struct lynx_share* share, struct pci_dev* pdev)
{
int ret;
struct sm750_share * spec_share;
spec_share = container_of(share, struct sm750_share,share);
ret = 0;
share->vidreg_start = pci_resource_start(pdev, 1);
share->vidreg_size = MB(2);
pr_info("mmio phyAddr = %lx\n", share->vidreg_start);
/* reserve the vidreg space of smi adaptor
* if you do this, u need to add release region code
* in lynxfb_remove, or memory will not be mapped again
* successfully
* */
if((ret = pci_request_region(pdev, 1, "sm750fb")))
{
pr_err("Can not request PCI regions.\n");
goto exit;
}
/* now map mmio and vidmem*/
share->pvReg = ioremap_nocache(share->vidreg_start, share->vidreg_size);
if(!share->pvReg){
pr_err("mmio failed\n");
ret = -EFAULT;
goto exit;
}else{
pr_info("mmio virtual addr = %p\n", share->pvReg);
}
share->accel.dprBase = share->pvReg + DE_BASE_ADDR_TYPE1;
share->accel.dpPortBase = share->pvReg + DE_PORT_ADDR_TYPE1;
ddk750_set_mmio(share->pvReg,share->devid, share->revid);
share->vidmem_start = pci_resource_start(pdev, 0);
/* don't use pdev_resource[x].end - resource[x].start to
* calculate the resource size,its only the maximum available
* size but not the actual size,use
* @hw_sm750_getVMSize function can be safe.
* */
share->vidmem_size = hw_sm750_getVMSize(share);
pr_info("video memory phyAddr = %lx, size = %u bytes\n",
share->vidmem_start, share->vidmem_size);
/* reserve the vidmem space of smi adaptor */
#if 0
if((ret = pci_request_region(pdev,0,_moduleName_)))
{
pr_err("Can not request PCI regions.\n");
goto exit;
}
#endif
share->pvMem = ioremap(share->vidmem_start,
share->vidmem_size);
if(!share->pvMem){
pr_err("Map video memory failed\n");
ret = -EFAULT;
goto exit;
}else{
pr_info("video memory vaddr = %p\n", share->pvMem);
}
exit:
return ret;
}
int hw_sm750_inithw(struct lynx_share* share, struct pci_dev * pdev)
{
struct sm750_share * spec_share;
struct init_status * parm;
spec_share = container_of(share, struct sm750_share,share);
parm = &spec_share->state.initParm;
if(parm->chip_clk == 0)
parm->chip_clk = (getChipType() == SM750LE)?
DEFAULT_SM750LE_CHIP_CLOCK :
DEFAULT_SM750_CHIP_CLOCK;
if(parm->mem_clk == 0)
parm->mem_clk = parm->chip_clk;
if(parm->master_clk == 0)
parm->master_clk = parm->chip_clk/3;
ddk750_initHw((initchip_param_t *)&spec_share->state.initParm);
/* for sm718,open pci burst */
if(share->devid == 0x718){
POKE32(SYSTEM_CTRL,
FIELD_SET(PEEK32(SYSTEM_CTRL), SYSTEM_CTRL, PCI_BURST, ON));
}
/* sm750 use sii164, it can be setup with default value
* by on power, so initDVIDisp can be skipped */
#if 0
ddk750_initDVIDisp();
#endif
if(getChipType() != SM750LE)
{
/* does user need CRT ?*/
if(spec_share->state.nocrt){
POKE32(MISC_CTRL,
FIELD_SET(PEEK32(MISC_CTRL),
MISC_CTRL,
DAC_POWER, OFF));
/* shut off dpms */
POKE32(SYSTEM_CTRL,
FIELD_SET(PEEK32(SYSTEM_CTRL),
SYSTEM_CTRL,
DPMS, VNHN));
}else{
POKE32(MISC_CTRL,
FIELD_SET(PEEK32(MISC_CTRL),
MISC_CTRL,
DAC_POWER, ON));
/* turn on dpms */
POKE32(SYSTEM_CTRL,
FIELD_SET(PEEK32(SYSTEM_CTRL),
SYSTEM_CTRL,
DPMS, VPHP));
}
switch (spec_share->state.pnltype){
case sm750_doubleTFT:
case sm750_24TFT:
case sm750_dualTFT:
POKE32(PANEL_DISPLAY_CTRL,
FIELD_VALUE(PEEK32(PANEL_DISPLAY_CTRL),
PANEL_DISPLAY_CTRL,
TFT_DISP,
spec_share->state.pnltype));
break;
}
}else{
/* for 750LE ,no DVI chip initilization makes Monitor no signal */
/* Set up GPIO for software I2C to program DVI chip in the
Xilinx SP605 board, in order to have video signal.
*/
swI2CInit(0,1);
/* Customer may NOT use CH7301 DVI chip, which has to be
initialized differently.
*/
if (swI2CReadReg(0xec, 0x4a) == 0x95)
{
/* The following register values for CH7301 are from
Chrontel app note and our experiment.
*/
pr_info("yes,CH7301 DVI chip found\n");
swI2CWriteReg(0xec, 0x1d, 0x16);
swI2CWriteReg(0xec, 0x21, 0x9);
swI2CWriteReg(0xec, 0x49, 0xC0);
pr_info("okay,CH7301 DVI chip setup done\n");
}
}
/* init 2d engine */
if(!share->accel_off){
hw_sm750_initAccel(share);
// share->accel.de_wait = hw_sm750_deWait;
}
return 0;
}
resource_size_t hw_sm750_getVMSize(struct lynx_share * share)
{
resource_size_t ret;
ret = ddk750_getVMSize();
return ret;
}
int hw_sm750_output_checkMode(struct lynxfb_output* output, struct fb_var_screeninfo* var)
{
return 0;
}
int hw_sm750_output_setMode(struct lynxfb_output* output,
struct fb_var_screeninfo* var, struct fb_fix_screeninfo* fix)
{
int ret;
disp_output_t dispSet;
int channel;
ret = 0;
dispSet = 0;
channel = *output->channel;
if(getChipType() != SM750LE){
if(channel == sm750_primary){
pr_info("primary channel\n");
if(output->paths & sm750_panel)
dispSet |= do_LCD1_PRI;
if(output->paths & sm750_crt)
dispSet |= do_CRT_PRI;
}else{
pr_info("secondary channel\n");
if(output->paths & sm750_panel)
dispSet |= do_LCD1_SEC;
if(output->paths & sm750_crt)
dispSet |= do_CRT_SEC;
}
ddk750_setLogicalDispOut(dispSet);
}else{
/* just open DISPLAY_CONTROL_750LE register bit 3:0*/
u32 reg;
reg = PEEK32(DISPLAY_CONTROL_750LE);
reg |= 0xf;
POKE32(DISPLAY_CONTROL_750LE, reg);
}
pr_info("ddk setlogicdispout done \n");
return ret;
}
void hw_sm750_output_clear(struct lynxfb_output* output)
{
return;
}
int hw_sm750_crtc_checkMode(struct lynxfb_crtc* crtc, struct fb_var_screeninfo* var)
{
struct lynx_share * share;
share = container_of(crtc, struct lynxfb_par,crtc)->share;
switch (var->bits_per_pixel){
case 8:
case 16:
break;
case 32:
if (share->revid == SM750LE_REVISION_ID) {
pr_debug("750le do not support 32bpp\n");
return -EINVAL;
}
break;
default:
return -EINVAL;
}
return 0;
}
/*
set the controller's mode for @crtc charged with @var and @fix parameters
*/
int hw_sm750_crtc_setMode(struct lynxfb_crtc* crtc,
struct fb_var_screeninfo* var,
struct fb_fix_screeninfo* fix)
{
int ret,fmt;
u32 reg;
mode_parameter_t modparm;
clock_type_t clock;
struct lynx_share * share;
struct lynxfb_par * par;
ret = 0;
par = container_of(crtc, struct lynxfb_par, crtc);
share = par->share;
#if 1
if(!share->accel_off){
/* set 2d engine pixel format according to mode bpp */
switch(var->bits_per_pixel){
case 8:
fmt = 0;
break;
case 16:
fmt = 1;
break;
case 32:
default:
fmt = 2;
break;
}
hw_set2dformat(&share->accel, fmt);
}
#endif
/* set timing */
// modparm.pixel_clock = PS_TO_HZ(var->pixclock);
modparm.pixel_clock = ps_to_hz(var->pixclock);
modparm.vertical_sync_polarity = (var->sync & FB_SYNC_HOR_HIGH_ACT) ? POS:NEG;
modparm.horizontal_sync_polarity = (var->sync & FB_SYNC_VERT_HIGH_ACT) ? POS:NEG;
modparm.clock_phase_polarity = (var->sync& FB_SYNC_COMP_HIGH_ACT) ? POS:NEG;
modparm.horizontal_display_end = var->xres;
modparm.horizontal_sync_width = var->hsync_len;
modparm.horizontal_sync_start = var->xres + var->right_margin;
modparm.horizontal_total = var->xres + var->left_margin + var->right_margin + var->hsync_len;
modparm.vertical_display_end = var->yres;
modparm.vertical_sync_height = var->vsync_len;
modparm.vertical_sync_start = var->yres + var->lower_margin;
modparm.vertical_total = var->yres + var->upper_margin + var->lower_margin + var->vsync_len;
/* choose pll */
if(crtc->channel != sm750_secondary)
clock = PRIMARY_PLL;
else
clock = SECONDARY_PLL;
pr_debug("Request pixel clock = %lu\n", modparm.pixel_clock);
ret = ddk750_setModeTiming(&modparm, clock);
if(ret){
pr_err("Set mode timing failed\n");
goto exit;
}
if(crtc->channel != sm750_secondary){
/* set pitch, offset ,width,start address ,etc... */
POKE32(PANEL_FB_ADDRESS,
FIELD_SET(0, PANEL_FB_ADDRESS, STATUS, CURRENT)|
FIELD_SET(0, PANEL_FB_ADDRESS, EXT, LOCAL)|
FIELD_VALUE(0, PANEL_FB_ADDRESS, ADDRESS, crtc->oScreen));
reg = var->xres * (var->bits_per_pixel >> 3);
/* crtc->channel is not equal to par->index on numeric,be aware of that */
reg = PADDING(crtc->line_pad,reg);
POKE32(PANEL_FB_WIDTH,
FIELD_VALUE(0, PANEL_FB_WIDTH, WIDTH, reg)|
FIELD_VALUE(0, PANEL_FB_WIDTH, OFFSET, fix->line_length));
POKE32(PANEL_WINDOW_WIDTH,
FIELD_VALUE(0, PANEL_WINDOW_WIDTH, WIDTH, var->xres -1)|
FIELD_VALUE(0, PANEL_WINDOW_WIDTH, X, var->xoffset));
POKE32(PANEL_WINDOW_HEIGHT,
FIELD_VALUE(0, PANEL_WINDOW_HEIGHT, HEIGHT, var->yres_virtual - 1)|
FIELD_VALUE(0, PANEL_WINDOW_HEIGHT, Y, var->yoffset));
POKE32(PANEL_PLANE_TL, 0);
POKE32(PANEL_PLANE_BR,
FIELD_VALUE(0, PANEL_PLANE_BR, BOTTOM, var->yres - 1)|
FIELD_VALUE(0, PANEL_PLANE_BR,RIGHT, var->xres - 1));
/* set pixel format */
reg = PEEK32(PANEL_DISPLAY_CTRL);
POKE32(PANEL_DISPLAY_CTRL,
FIELD_VALUE(reg,
PANEL_DISPLAY_CTRL, FORMAT,
(var->bits_per_pixel >> 4)
));
}else{
/* not implemented now */
POKE32(CRT_FB_ADDRESS, crtc->oScreen);
reg = var->xres * (var->bits_per_pixel >> 3);
/* crtc->channel is not equal to par->index on numeric,be aware of that */
reg = PADDING(crtc->line_pad, reg);
POKE32(CRT_FB_WIDTH,
FIELD_VALUE(0, CRT_FB_WIDTH, WIDTH, reg)|
FIELD_VALUE(0, CRT_FB_WIDTH, OFFSET, fix->line_length));
/* SET PIXEL FORMAT */
reg = PEEK32(CRT_DISPLAY_CTRL);
reg = FIELD_VALUE(reg, CRT_DISPLAY_CTRL, FORMAT, var->bits_per_pixel >> 4);
POKE32(CRT_DISPLAY_CTRL, reg);
}
exit:
return ret;
}
void hw_sm750_crtc_clear(struct lynxfb_crtc* crtc)
{
return;
}
int hw_sm750_setColReg(struct lynxfb_crtc* crtc, ushort index,
ushort red, ushort green, ushort blue)
{
static unsigned int add[]={PANEL_PALETTE_RAM,CRT_PALETTE_RAM};
POKE32(add[crtc->channel] + index*4, (red<<16)|(green<<8)|blue);
return 0;
}
int hw_sm750le_setBLANK(struct lynxfb_output * output, int blank){
int dpms,crtdb;
switch(blank)
{
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
case FB_BLANK_UNBLANK:
#else
case VESA_NO_BLANKING:
#endif
dpms = CRT_DISPLAY_CTRL_DPMS_0;
crtdb = CRT_DISPLAY_CTRL_BLANK_OFF;
break;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
case FB_BLANK_NORMAL:
dpms = CRT_DISPLAY_CTRL_DPMS_0;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
#endif
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
case FB_BLANK_VSYNC_SUSPEND:
#else
case VESA_VSYNC_SUSPEND:
#endif
dpms = CRT_DISPLAY_CTRL_DPMS_2;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
case FB_BLANK_HSYNC_SUSPEND:
#else
case VESA_HSYNC_SUSPEND:
#endif
dpms = CRT_DISPLAY_CTRL_DPMS_1;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
case FB_BLANK_POWERDOWN:
#else
case VESA_POWERDOWN:
#endif
dpms = CRT_DISPLAY_CTRL_DPMS_3;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
default:
return -EINVAL;
}
if(output->paths & sm750_crt){
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, DPMS, dpms));
POKE32(CRT_DISPLAY_CTRL, FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL, BLANK, crtdb));
}
return 0;
}
int hw_sm750_setBLANK(struct lynxfb_output* output,int blank)
{
unsigned int dpms, pps, crtdb;
dpms = pps = crtdb = 0;
switch (blank)
{
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
case FB_BLANK_UNBLANK:
#else
case VESA_NO_BLANKING:
#endif
pr_info("flag = FB_BLANK_UNBLANK \n");
dpms = SYSTEM_CTRL_DPMS_VPHP;
pps = PANEL_DISPLAY_CTRL_DATA_ENABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_OFF;
break;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
case FB_BLANK_NORMAL:
pr_info("flag = FB_BLANK_NORMAL \n");
dpms = SYSTEM_CTRL_DPMS_VPHP;
pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
#endif
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
case FB_BLANK_VSYNC_SUSPEND:
#else
case VESA_VSYNC_SUSPEND:
#endif
dpms = SYSTEM_CTRL_DPMS_VNHP;
pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
case FB_BLANK_HSYNC_SUSPEND:
#else
case VESA_HSYNC_SUSPEND:
#endif
dpms = SYSTEM_CTRL_DPMS_VPHN;
pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,10)
case FB_BLANK_POWERDOWN:
#else
case VESA_POWERDOWN:
#endif
dpms = SYSTEM_CTRL_DPMS_VNHN;
pps = PANEL_DISPLAY_CTRL_DATA_DISABLE;
crtdb = CRT_DISPLAY_CTRL_BLANK_ON;
break;
}
if(output->paths & sm750_crt){
POKE32(SYSTEM_CTRL,FIELD_VALUE(PEEK32(SYSTEM_CTRL), SYSTEM_CTRL, DPMS, dpms));
POKE32(CRT_DISPLAY_CTRL,FIELD_VALUE(PEEK32(CRT_DISPLAY_CTRL), CRT_DISPLAY_CTRL,BLANK, crtdb));
}
if(output->paths & sm750_panel){
POKE32(PANEL_DISPLAY_CTRL, FIELD_VALUE(PEEK32(PANEL_DISPLAY_CTRL), PANEL_DISPLAY_CTRL, DATA, pps));
}
return 0;
}
void hw_sm750_initAccel(struct lynx_share * share)
{
u32 reg;
enable2DEngine(1);
if(getChipType() == SM750LE){
reg = PEEK32(DE_STATE1);
reg = FIELD_SET(reg, DE_STATE1, DE_ABORT,ON);
POKE32(DE_STATE1,reg);
reg = PEEK32(DE_STATE1);
reg = FIELD_SET(reg, DE_STATE1, DE_ABORT,OFF);
POKE32(DE_STATE1, reg);
}else{
/* engine reset */
reg = PEEK32(SYSTEM_CTRL);
reg = FIELD_SET(reg, SYSTEM_CTRL, DE_ABORT,ON);
POKE32(SYSTEM_CTRL, reg);
reg = PEEK32(SYSTEM_CTRL);
reg = FIELD_SET(reg, SYSTEM_CTRL, DE_ABORT,OFF);
POKE32(SYSTEM_CTRL, reg);
}
/* call 2d init */
share->accel.de_init(&share->accel);
}
int hw_sm750le_deWait(void)
{
int i=0x10000000;
while(i--){
unsigned int dwVal = PEEK32(DE_STATE2);
if((FIELD_GET(dwVal, DE_STATE2, DE_STATUS) == DE_STATE2_DE_STATUS_IDLE) &&
(FIELD_GET(dwVal, DE_STATE2, DE_FIFO) == DE_STATE2_DE_FIFO_EMPTY) &&
(FIELD_GET(dwVal, DE_STATE2, DE_MEM_FIFO) == DE_STATE2_DE_MEM_FIFO_EMPTY))
{
return 0;
}
}
/* timeout error */
return -1;
}
int hw_sm750_deWait(void)
{
int i=0x10000000;
while(i--){
unsigned int dwVal = PEEK32(SYSTEM_CTRL);
if((FIELD_GET(dwVal,SYSTEM_CTRL,DE_STATUS) == SYSTEM_CTRL_DE_STATUS_IDLE) &&
(FIELD_GET(dwVal,SYSTEM_CTRL,DE_FIFO) == SYSTEM_CTRL_DE_FIFO_EMPTY) &&
(FIELD_GET(dwVal,SYSTEM_CTRL,DE_MEM_FIFO) == SYSTEM_CTRL_DE_MEM_FIFO_EMPTY))
{
return 0;
}
}
/* timeout error */
return -1;
}
int hw_sm750_pan_display(struct lynxfb_crtc *crtc,
const struct fb_var_screeninfo *var,
const struct fb_info *info)
{
uint32_t total;
//check params
if ((var->xoffset + var->xres > var->xres_virtual) ||
(var->yoffset + var->yres > var->yres_virtual)) {
return -EINVAL;
}
total = var->yoffset * info->fix.line_length +
((var->xoffset * var->bits_per_pixel) >> 3);
total += crtc->oScreen;
if (crtc->channel == sm750_primary) {
POKE32(PANEL_FB_ADDRESS,
FIELD_VALUE(PEEK32(PANEL_FB_ADDRESS),
PANEL_FB_ADDRESS, ADDRESS, total));
} else {
POKE32(CRT_FB_ADDRESS,
FIELD_VALUE(PEEK32(CRT_FB_ADDRESS),
CRT_FB_ADDRESS, ADDRESS, total));
}
return 0;
}