- 根目录:
- drivers
- staging
- rtl8192u
- r8190_rtl8256.c
/*
This is part of the rtl8192 driver
released under the GPL (See file COPYING for details).
This files contains programming code for the rtl8256
radio frontend.
*Many* thanks to Realtek Corp. for their great support!
*/
#include "r8192U.h"
#include "r8192U_hw.h"
#include "r819xU_phyreg.h"
#include "r819xU_phy.h"
#include "r8190_rtl8256.h"
/*--------------------------------------------------------------------------
* Overview: set RF band width (20M or 40M)
* Input: struct net_device* dev
* WIRELESS_BANDWIDTH_E Bandwidth //20M or 40M
* Output: NONE
* Return: NONE
* Note: 8226 support both 20M and 40 MHz
*---------------------------------------------------------------------------*/
void PHY_SetRF8256Bandwidth(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth)
{
u8 eRFPath;
struct r8192_priv *priv = ieee80211_priv(dev);
/* for(eRFPath = RF90_PATH_A; eRFPath <pHalData->NumTotalRFPath;
* eRFPath++)
*/
for (eRFPath = 0; eRFPath < RF90_PATH_MAX; eRFPath++) {
if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
continue;
switch (Bandwidth) {
case HT_CHANNEL_WIDTH_20:
if (priv->card_8192_version == VERSION_819xU_A
|| priv->card_8192_version
== VERSION_819xU_B) { /* 8256 D-cut, E-cut, xiong: consider it later! */
rtl8192_phy_SetRFReg(dev,
(RF90_RADIO_PATH_E)eRFPath,
0x0b, bMask12Bits, 0x100); /* phy para:1ba */
rtl8192_phy_SetRFReg(dev,
(RF90_RADIO_PATH_E)eRFPath,
0x2c, bMask12Bits, 0x3d7);
rtl8192_phy_SetRFReg(dev,
(RF90_RADIO_PATH_E)eRFPath,
0x0e, bMask12Bits, 0x021);
rtl8192_phy_SetRFReg(dev,
(RF90_RADIO_PATH_E)eRFPath,
0x14, bMask12Bits, 0x5ab);
} else {
RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown hardware version\n");
}
break;
case HT_CHANNEL_WIDTH_20_40:
if (priv->card_8192_version == VERSION_819xU_A || priv->card_8192_version == VERSION_819xU_B) { /* 8256 D-cut, E-cut, xiong: consider it later! */
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0b, bMask12Bits, 0x300); /* phy para:3ba */
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x2c, bMask12Bits, 0x3df);
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x0e, bMask12Bits, 0x0a1);
if (priv->chan == 3 || priv->chan == 9)
/* I need to set priv->chan whenever current channel changes */
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x59b);
else
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, 0x14, bMask12Bits, 0x5ab);
} else {
RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown hardware version\n");
}
break;
default:
RT_TRACE(COMP_ERR, "PHY_SetRF8256Bandwidth(): unknown Bandwidth: %#X\n", Bandwidth);
break;
}
}
}
/*--------------------------------------------------------------------------
* Overview: Interface to config 8256
* Input: struct net_device* dev
* Output: NONE
* Return: NONE
*---------------------------------------------------------------------------*/
void PHY_RF8256_Config(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
/* Initialize general global value
*
* TODO: Extend RF_PATH_C and RF_PATH_D in the future
*/
priv->NumTotalRFPath = RTL819X_TOTAL_RF_PATH;
/* Config BB and RF */
phy_RF8256_Config_ParaFile(dev);
}
/*--------------------------------------------------------------------------
* Overview: Interface to config 8256
* Input: struct net_device* dev
* Output: NONE
* Return: NONE
*---------------------------------------------------------------------------*/
void phy_RF8256_Config_ParaFile(struct net_device *dev)
{
u32 u4RegValue = 0;
u8 eRFPath;
BB_REGISTER_DEFINITION_T *pPhyReg;
struct r8192_priv *priv = ieee80211_priv(dev);
u32 RegOffSetToBeCheck = 0x3;
u32 RegValueToBeCheck = 0x7f1;
u32 RF3_Final_Value = 0;
u8 ConstRetryTimes = 5, RetryTimes = 5;
u8 ret = 0;
/* Initialize RF */
for (eRFPath = (RF90_RADIO_PATH_E)RF90_PATH_A; eRFPath < priv->NumTotalRFPath; eRFPath++) {
if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
continue;
pPhyReg = &priv->PHYRegDef[eRFPath];
/* Joseph test for shorten RF config
* pHalData->RfReg0Value[eRFPath] = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, rGlobalCtrl, bMaskDWord);
* ----Store original RFENV control type
*/
switch (eRFPath) {
case RF90_PATH_A:
case RF90_PATH_C:
u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV);
break;
case RF90_PATH_B:
case RF90_PATH_D:
u4RegValue = rtl8192_QueryBBReg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16);
break;
}
/*----Set RF_ENV enable----*/
rtl8192_setBBreg(dev, pPhyReg->rfintfe, bRFSI_RFENV<<16, 0x1);
/*----Set RF_ENV output high----*/
rtl8192_setBBreg(dev, pPhyReg->rfintfo, bRFSI_RFENV, 0x1);
/* Set bit number of Address and Data for RF register */
rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireAddressLength, 0x0); /* Set 0 to 4 bits for Z-serial and set 1 to 6 bits for 8258 */
rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, b3WireDataLength, 0x0); /* Set 0 to 12 bits for Z-serial and 8258, and set 1 to 14 bits for ??? */
rtl8192_phy_SetRFReg(dev, (RF90_RADIO_PATH_E) eRFPath, 0x0, bMask12Bits, 0xbf);
/* Check RF block (for FPGA platform only)----
* TODO: this function should be removed on ASIC , Emily 2007.2.2
*/
if (rtl8192_phy_checkBBAndRF(dev, HW90_BLOCK_RF, (RF90_RADIO_PATH_E)eRFPath)) {
RT_TRACE(COMP_ERR, "PHY_RF8256_Config():Check Radio[%d] Fail!!\n", eRFPath);
goto phy_RF8256_Config_ParaFile_Fail;
}
RetryTimes = ConstRetryTimes;
RF3_Final_Value = 0;
/*----Initialize RF fom connfiguration file----*/
switch (eRFPath) {
case RF90_PATH_A:
while (RF3_Final_Value != RegValueToBeCheck && RetryTimes != 0) {
ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (RF90_RADIO_PATH_E)eRFPath);
RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
break;
case RF90_PATH_B:
while (RF3_Final_Value != RegValueToBeCheck && RetryTimes != 0) {
ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (RF90_RADIO_PATH_E)eRFPath);
RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
break;
case RF90_PATH_C:
while (RF3_Final_Value != RegValueToBeCheck && RetryTimes != 0) {
ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (RF90_RADIO_PATH_E)eRFPath);
RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
break;
case RF90_PATH_D:
while (RF3_Final_Value != RegValueToBeCheck && RetryTimes != 0) {
ret = rtl8192_phy_ConfigRFWithHeaderFile(dev, (RF90_RADIO_PATH_E)eRFPath);
RF3_Final_Value = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, RegOffSetToBeCheck, bMask12Bits);
RT_TRACE(COMP_RF, "RF %d %d register final value: %x\n", eRFPath, RegOffSetToBeCheck, RF3_Final_Value);
RetryTimes--;
}
break;
}
/*----Restore RFENV control type----*/;
switch (eRFPath) {
case RF90_PATH_A:
case RF90_PATH_C:
rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV, u4RegValue);
break;
case RF90_PATH_B:
case RF90_PATH_D:
rtl8192_setBBreg(dev, pPhyReg->rfintfs, bRFSI_RFENV<<16, u4RegValue);
break;
}
if (ret) {
RT_TRACE(COMP_ERR, "phy_RF8256_Config_ParaFile():Radio[%d] Fail!!", eRFPath);
goto phy_RF8256_Config_ParaFile_Fail;
}
}
RT_TRACE(COMP_PHY, "PHY Initialization Success\n");
return;
phy_RF8256_Config_ParaFile_Fail:
RT_TRACE(COMP_ERR, "PHY Initialization failed\n");
}
void PHY_SetRF8256CCKTxPower(struct net_device *dev, u8 powerlevel)
{
u32 TxAGC = 0;
struct r8192_priv *priv = ieee80211_priv(dev);
TxAGC = powerlevel;
if (priv->bDynamicTxLowPower) {
if (priv->CustomerID == RT_CID_819x_Netcore)
TxAGC = 0x22;
else
TxAGC += priv->CckPwEnl;
}
if (TxAGC > 0x24)
TxAGC = 0x24;
rtl8192_setBBreg(dev, rTxAGC_CCK_Mcs32, bTxAGCRateCCK, TxAGC);
}
void PHY_SetRF8256OFDMTxPower(struct net_device *dev, u8 powerlevel)
{
struct r8192_priv *priv = ieee80211_priv(dev);
/* Joseph TxPower for 8192 testing */
u32 writeVal, powerBase0, powerBase1, writeVal_tmp;
u8 index = 0;
u16 RegOffset[6] = {0xe00, 0xe04, 0xe10, 0xe14, 0xe18, 0xe1c};
u8 byte0, byte1, byte2, byte3;
powerBase0 = powerlevel + priv->TxPowerDiff; /* OFDM rates */
powerBase0 = (powerBase0<<24) | (powerBase0<<16) | (powerBase0<<8) | powerBase0;
powerBase1 = powerlevel; /* MCS rates */
powerBase1 = (powerBase1<<24) | (powerBase1<<16) | (powerBase1<<8) | powerBase1;
for (index = 0; index < 6; index++) {
writeVal = priv->MCSTxPowerLevelOriginalOffset[index] + ((index < 2)?powerBase0:powerBase1);
byte0 = (u8)(writeVal & 0x7f);
byte1 = (u8)((writeVal & 0x7f00)>>8);
byte2 = (u8)((writeVal & 0x7f0000)>>16);
byte3 = (u8)((writeVal & 0x7f000000)>>24);
if (byte0 > 0x24)
/* Max power index = 0x24 */
byte0 = 0x24;
if (byte1 > 0x24)
byte1 = 0x24;
if (byte2 > 0x24)
byte2 = 0x24;
if (byte3 > 0x24)
byte3 = 0x24;
/* for tx power track */
if (index == 3) {
writeVal_tmp = (byte3<<24) | (byte2<<16) | (byte1<<8) | byte0;
priv->Pwr_Track = writeVal_tmp;
}
if (priv->bDynamicTxHighPower) {
/*Add by Jacken 2008/03/06
*Emily, 20080613. Set low tx power for both MCS and legacy OFDM
*/
writeVal = 0x03030303;
} else {
writeVal = (byte3<<24) | (byte2<<16) | (byte1<<8) | byte0;
}
rtl8192_setBBreg(dev, RegOffset[index], 0x7f7f7f7f, writeVal);
}
return;
}