- 根目录:
- arch
- xtensa
- platforms
- xtfpga
- setup.c
/*
*
* arch/xtensa/platform/xtavnet/setup.c
*
* ...
*
* Authors: Chris Zankel <chris@zankel.net>
* Joe Taylor <joe@tensilica.com>
*
* Copyright 2001 - 2006 Tensilica Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/kdev_t.h>
#include <linux/types.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/of.h>
#include <asm/timex.h>
#include <asm/processor.h>
#include <asm/platform.h>
#include <asm/bootparam.h>
#include <platform/lcd.h>
#include <platform/hardware.h>
void platform_halt(void)
{
lcd_disp_at_pos(" HALT ", 0);
local_irq_disable();
while (1)
cpu_relax();
}
void platform_power_off(void)
{
lcd_disp_at_pos("POWEROFF", 0);
local_irq_disable();
while (1)
cpu_relax();
}
void platform_restart(void)
{
/* Flush and reset the mmu, simulate a processor reset, and
* jump to the reset vector. */
__asm__ __volatile__ ("movi a2, 15\n\t"
"wsr a2, icountlevel\n\t"
"movi a2, 0\n\t"
"wsr a2, icount\n\t"
#if XCHAL_NUM_IBREAK > 0
"wsr a2, ibreakenable\n\t"
#endif
"wsr a2, lcount\n\t"
"movi a2, 0x1f\n\t"
"wsr a2, ps\n\t"
"isync\n\t"
"jx %0\n\t"
:
: "a" (XCHAL_RESET_VECTOR_VADDR)
: "a2"
);
/* control never gets here */
}
void __init platform_setup(char **cmdline)
{
}
#ifdef CONFIG_OF
static void __init update_clock_frequency(struct device_node *node)
{
struct property *newfreq;
u32 freq;
if (!of_property_read_u32(node, "clock-frequency", &freq) && freq != 0)
return;
newfreq = kzalloc(sizeof(*newfreq) + sizeof(u32), GFP_KERNEL);
if (!newfreq)
return;
newfreq->value = newfreq + 1;
newfreq->length = sizeof(freq);
newfreq->name = kstrdup("clock-frequency", GFP_KERNEL);
if (!newfreq->name) {
kfree(newfreq);
return;
}
*(u32 *)newfreq->value = cpu_to_be32(*(u32 *)XTFPGA_CLKFRQ_VADDR);
of_update_property(node, newfreq);
}
#define MAC_LEN 6
static void __init update_local_mac(struct device_node *node)
{
struct property *newmac;
const u8* macaddr;
int prop_len;
macaddr = of_get_property(node, "local-mac-address", &prop_len);
if (macaddr == NULL || prop_len != MAC_LEN)
return;
newmac = kzalloc(sizeof(*newmac) + MAC_LEN, GFP_KERNEL);
if (newmac == NULL)
return;
newmac->value = newmac + 1;
newmac->length = MAC_LEN;
newmac->name = kstrdup("local-mac-address", GFP_KERNEL);
if (newmac->name == NULL) {
kfree(newmac);
return;
}
memcpy(newmac->value, macaddr, MAC_LEN);
((u8*)newmac->value)[5] = (*(u32*)DIP_SWITCHES_VADDR) & 0x3f;
of_update_property(node, newmac);
}
static int __init machine_setup(void)
{
struct device_node *clock;
struct device_node *eth = NULL;
for_each_node_by_name(clock, "main-oscillator")
update_clock_frequency(clock);
if ((eth = of_find_compatible_node(eth, NULL, "opencores,ethoc")))
update_local_mac(eth);
return 0;
}
arch_initcall(machine_setup);
#endif
/* early initialization */
void __init platform_init(bp_tag_t *first)
{
}
/* Heartbeat. */
void platform_heartbeat(void)
{
}
#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
void __init platform_calibrate_ccount(void)
{
long clk_freq = 0;
#ifdef CONFIG_OF
struct device_node *cpu =
of_find_compatible_node(NULL, NULL, "cdns,xtensa-cpu");
if (cpu) {
u32 freq;
update_clock_frequency(cpu);
if (!of_property_read_u32(cpu, "clock-frequency", &freq))
clk_freq = freq;
}
#endif
if (!clk_freq)
clk_freq = *(long *)XTFPGA_CLKFRQ_VADDR;
ccount_freq = clk_freq;
}
#endif
#ifndef CONFIG_OF
#include <linux/serial_8250.h>
#include <linux/if.h>
#include <net/ethoc.h>
#include <linux/usb/c67x00.h>
/*----------------------------------------------------------------------------
* Ethernet -- OpenCores Ethernet MAC (ethoc driver)
*/
static struct resource ethoc_res[] = {
[0] = { /* register space */
.start = OETH_REGS_PADDR,
.end = OETH_REGS_PADDR + OETH_REGS_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = { /* buffer space */
.start = OETH_SRAMBUFF_PADDR,
.end = OETH_SRAMBUFF_PADDR + OETH_SRAMBUFF_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[2] = { /* IRQ number */
.start = OETH_IRQ,
.end = OETH_IRQ,
.flags = IORESOURCE_IRQ,
},
};
static struct ethoc_platform_data ethoc_pdata = {
/*
* The MAC address for these boards is 00:50:c2:13:6f:xx.
* The last byte (here as zero) is read from the DIP switches on the
* board.
*/
.hwaddr = { 0x00, 0x50, 0xc2, 0x13, 0x6f, 0 },
.phy_id = -1,
};
static struct platform_device ethoc_device = {
.name = "ethoc",
.id = -1,
.num_resources = ARRAY_SIZE(ethoc_res),
.resource = ethoc_res,
.dev = {
.platform_data = ðoc_pdata,
},
};
/*----------------------------------------------------------------------------
* USB Host/Device -- Cypress CY7C67300
*/
static struct resource c67x00_res[] = {
[0] = { /* register space */
.start = C67X00_PADDR,
.end = C67X00_PADDR + C67X00_SIZE - 1,
.flags = IORESOURCE_MEM,
},
[1] = { /* IRQ number */
.start = C67X00_IRQ,
.end = C67X00_IRQ,
.flags = IORESOURCE_IRQ,
},
};
static struct c67x00_platform_data c67x00_pdata = {
.sie_config = C67X00_SIE1_HOST | C67X00_SIE2_UNUSED,
.hpi_regstep = 4,
};
static struct platform_device c67x00_device = {
.name = "c67x00",
.id = -1,
.num_resources = ARRAY_SIZE(c67x00_res),
.resource = c67x00_res,
.dev = {
.platform_data = &c67x00_pdata,
},
};
/*----------------------------------------------------------------------------
* UART
*/
static struct resource serial_resource = {
.start = DUART16552_PADDR,
.end = DUART16552_PADDR + 0x1f,
.flags = IORESOURCE_MEM,
};
static struct plat_serial8250_port serial_platform_data[] = {
[0] = {
.mapbase = DUART16552_PADDR,
.irq = DUART16552_INTNUM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
UPF_IOREMAP,
.iotype = UPIO_MEM32,
.regshift = 2,
.uartclk = 0, /* set in xtavnet_init() */
},
{ },
};
static struct platform_device xtavnet_uart = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = serial_platform_data,
},
.num_resources = 1,
.resource = &serial_resource,
};
/* platform devices */
static struct platform_device *platform_devices[] __initdata = {
ðoc_device,
&c67x00_device,
&xtavnet_uart,
};
static int __init xtavnet_init(void)
{
/* Ethernet MAC address. */
ethoc_pdata.hwaddr[5] = *(u32 *)DIP_SWITCHES_VADDR;
/* Clock rate varies among FPGA bitstreams; board specific FPGA register
* reports the actual clock rate.
*/
serial_platform_data[0].uartclk = *(long *)XTFPGA_CLKFRQ_VADDR;
/* register platform devices */
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
/* ETHOC driver is a bit quiet; at least display Ethernet MAC, so user
* knows whether they set it correctly on the DIP switches.
*/
pr_info("XTFPGA: Ethernet MAC %pM\n", ethoc_pdata.hwaddr);
ethoc_pdata.eth_clkfreq = *(long *)XTFPGA_CLKFRQ_VADDR;
return 0;
}
/*
* Register to be done during do_initcalls().
*/
arch_initcall(xtavnet_init);
#endif /* CONFIG_OF */