/* * EHCI HCD (Host Controller Driver) for USB. * * Bus Glue for PPC On-Chip EHCI driver on the of_platform bus * Tested on AMCC PPC 440EPx * * Valentine Barshak <vbarshak@ru.mvista.com> * * Based on "ehci-ppc-soc.c" by Stefan Roese <sr@denx.de> * and "ohci-ppc-of.c" by Sylvain Munaut <tnt@246tNt.com> * * This file is licenced under the GPL. */ #include <linux/err.h> #include <linux/signal.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> static const struct hc_driver ehci_ppc_of_hc_driver = { .description = hcd_name, .product_desc = "OF EHCI", .hcd_priv_size = sizeof(struct ehci_hcd), /* * generic hardware linkage */ .irq = ehci_irq, .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, /* * basic lifecycle operations */ .reset = ehci_setup, .start = ehci_run, .stop = ehci_stop, .shutdown = ehci_shutdown, /* * managing i/o requests and associated device resources */ .urb_enqueue = ehci_urb_enqueue, .urb_dequeue = ehci_urb_dequeue, .endpoint_disable = ehci_endpoint_disable, .endpoint_reset = ehci_endpoint_reset, /* * scheduling support */ .get_frame_number = ehci_get_frame, /* * root hub support */ .hub_status_data = ehci_hub_status_data, .hub_control = ehci_hub_control, #ifdef CONFIG_PM .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, #endif .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, }; /* * 440EPx Errata USBH_3 * Fix: Enable Break Memory Transfer (BMT) in INSNREG3 */ #define PPC440EPX_EHCI0_INSREG_BMT (0x1 << 0) static int ppc44x_enable_bmt(struct device_node *dn) { __iomem u32 *insreg_virt; insreg_virt = of_iomap(dn, 1); if (!insreg_virt) return -EINVAL; out_be32(insreg_virt + 3, PPC440EPX_EHCI0_INSREG_BMT); iounmap(insreg_virt); return 0; } static int ehci_hcd_ppc_of_probe(struct platform_device *op) { struct device_node *dn = op->dev.of_node; struct usb_hcd *hcd; struct ehci_hcd *ehci = NULL; struct resource res; int irq; int rv; struct device_node *np; if (usb_disabled()) return -ENODEV; dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n"); rv = of_address_to_resource(dn, 0, &res); if (rv) return rv; hcd = usb_create_hcd(&ehci_ppc_of_hc_driver, &op->dev, "PPC-OF USB"); if (!hcd) return -ENOMEM; hcd->rsrc_start = res.start; hcd->rsrc_len = resource_size(&res); irq = irq_of_parse_and_map(dn, 0); if (irq == NO_IRQ) { dev_err(&op->dev, "%s: irq_of_parse_and_map failed\n", __FILE__); rv = -EBUSY; goto err_irq; } hcd->regs = devm_ioremap_resource(&op->dev, &res); if (IS_ERR(hcd->regs)) { rv = PTR_ERR(hcd->regs); goto err_ioremap; } ehci = hcd_to_ehci(hcd); np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx"); if (np != NULL) { /* claim we really affected by usb23 erratum */ if (!of_address_to_resource(np, 0, &res)) ehci->ohci_hcctrl_reg = devm_ioremap(&op->dev, res.start + OHCI_HCCTRL_OFFSET, OHCI_HCCTRL_LEN); else pr_debug("%s: no ohci offset in fdt\n", __FILE__); if (!ehci->ohci_hcctrl_reg) { pr_debug("%s: ioremap for ohci hcctrl failed\n", __FILE__); } else { ehci->has_amcc_usb23 = 1; } } if (of_get_property(dn, "big-endian", NULL)) { ehci->big_endian_mmio = 1; ehci->big_endian_desc = 1; } if (of_get_property(dn, "big-endian-regs", NULL)) ehci->big_endian_mmio = 1; if (of_get_property(dn, "big-endian-desc", NULL)) ehci->big_endian_desc = 1; ehci->caps = hcd->regs; if (of_device_is_compatible(dn, "ibm,usb-ehci-440epx")) { rv = ppc44x_enable_bmt(dn); ehci_dbg(ehci, "Break Memory Transfer (BMT) is %senabled!\n", rv ? "NOT ": ""); } rv = usb_add_hcd(hcd, irq, 0); if (rv) goto err_ioremap; device_wakeup_enable(hcd->self.controller); return 0; err_ioremap: irq_dispose_mapping(irq); err_irq: usb_put_hcd(hcd); return rv; } static int ehci_hcd_ppc_of_remove(struct platform_device *op) { struct usb_hcd *hcd = platform_get_drvdata(op); struct ehci_hcd *ehci = hcd_to_ehci(hcd); struct device_node *np; struct resource res; dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n"); usb_remove_hcd(hcd); irq_dispose_mapping(hcd->irq); /* use request_mem_region to test if the ohci driver is loaded. if so * ensure the ohci core is operational. */ if (ehci->has_amcc_usb23) { np = of_find_compatible_node(NULL, NULL, "ibm,usb-ohci-440epx"); if (np != NULL) { if (!of_address_to_resource(np, 0, &res)) if (!request_mem_region(res.start, 0x4, hcd_name)) set_ohci_hcfs(ehci, 1); else release_mem_region(res.start, 0x4); else pr_debug("%s: no ohci offset in fdt\n", __FILE__); of_node_put(np); } } usb_put_hcd(hcd); return 0; } static const struct of_device_id ehci_hcd_ppc_of_match[] = { { .compatible = "usb-ehci", }, {}, }; MODULE_DEVICE_TABLE(of, ehci_hcd_ppc_of_match); static struct platform_driver ehci_hcd_ppc_of_driver = { .probe = ehci_hcd_ppc_of_probe, .remove = ehci_hcd_ppc_of_remove, .shutdown = usb_hcd_platform_shutdown, .driver = { .name = "ppc-of-ehci", .of_match_table = ehci_hcd_ppc_of_match, }, };