/* Driver for Realtek PCI-Express card reader * Header file * * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2, or (at your option) any * later version. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License along * with this program; if not, see <http://www.gnu.org/licenses/>. * * Author: * Wei WANG (wei_wang@realsil.com.cn) * Micky Ching (micky_ching@realsil.com.cn) */ #ifndef __REALTEK_RTSX_MS_H #define __REALTEK_RTSX_MS_H #define MS_DELAY_WRITE #define MS_MAX_RETRY_COUNT 3 #define MS_EXTRA_SIZE 0x9 #define WRT_PRTCT 0x01 /* Error Code */ #define MS_NO_ERROR 0x00 #define MS_CRC16_ERROR 0x80 #define MS_TO_ERROR 0x40 #define MS_NO_CARD 0x20 #define MS_NO_MEMORY 0x10 #define MS_CMD_NK 0x08 #define MS_FLASH_READ_ERROR 0x04 #define MS_FLASH_WRITE_ERROR 0x02 #define MS_BREQ_ERROR 0x01 #define MS_NOT_FOUND 0x03 /* Transfer Protocol Command */ #define READ_PAGE_DATA 0x02 #define READ_REG 0x04 #define GET_INT 0x07 #define WRITE_PAGE_DATA 0x0D #define WRITE_REG 0x0B #define SET_RW_REG_ADRS 0x08 #define SET_CMD 0x0E #define PRO_READ_LONG_DATA 0x02 #define PRO_READ_SHORT_DATA 0x03 #define PRO_READ_REG 0x04 #define PRO_READ_QUAD_DATA 0x05 #define PRO_GET_INT 0x07 #define PRO_WRITE_LONG_DATA 0x0D #define PRO_WRITE_SHORT_DATA 0x0C #define PRO_WRITE_QUAD_DATA 0x0A #define PRO_WRITE_REG 0x0B #define PRO_SET_RW_REG_ADRS 0x08 #define PRO_SET_CMD 0x0E #define PRO_EX_SET_CMD 0x09 #ifdef SUPPORT_MAGIC_GATE #define MG_GET_ID 0x40 #define MG_SET_LID 0x41 #define MG_GET_LEKB 0x42 #define MG_SET_RD 0x43 #define MG_MAKE_RMS 0x44 #define MG_MAKE_KSE 0x45 #define MG_SET_IBD 0x46 #define MG_GET_IBD 0x47 #endif #ifdef XC_POWERCLASS #define XC_CHG_POWER 0x16 #endif #define BLOCK_READ 0xAA #define BLOCK_WRITE 0x55 #define BLOCK_END 0x33 #define BLOCK_ERASE 0x99 #define FLASH_STOP 0xCC #define SLEEP 0x5A #define CLEAR_BUF 0xC3 #define MS_RESET 0x3C #define PRO_READ_DATA 0x20 #define PRO_WRITE_DATA 0x21 #define PRO_READ_ATRB 0x24 #define PRO_STOP 0x25 #define PRO_ERASE 0x26 #define PRO_READ_2K_DATA 0x27 #define PRO_WRITE_2K_DATA 0x28 #define PRO_FORMAT 0x10 #define PRO_SLEEP 0x11 #define IntReg 0x01 #define StatusReg0 0x02 #define StatusReg1 0x03 #define SystemParm 0x10 #define BlockAdrs 0x11 #define CMDParm 0x14 #define PageAdrs 0x15 #define OverwriteFlag 0x16 #define ManagemenFlag 0x17 #define LogicalAdrs 0x18 #define ReserveArea 0x1A #define Pro_IntReg 0x01 #define Pro_StatusReg 0x02 #define Pro_TypeReg 0x04 #define Pro_IFModeReg 0x05 #define Pro_CatagoryReg 0x06 #define Pro_ClassReg 0x07 #define Pro_SystemParm 0x10 #define Pro_DataCount1 0x11 #define Pro_DataCount0 0x12 #define Pro_DataAddr3 0x13 #define Pro_DataAddr2 0x14 #define Pro_DataAddr1 0x15 #define Pro_DataAddr0 0x16 #define Pro_TPCParm 0x17 #define Pro_CMDParm 0x18 #define INT_REG_CED 0x80 #define INT_REG_ERR 0x40 #define INT_REG_BREQ 0x20 #define INT_REG_CMDNK 0x01 #define BLOCK_BOOT 0xC0 #define BLOCK_OK 0x80 #define PAGE_OK 0x60 #define DATA_COMPL 0x10 #define NOT_BOOT_BLOCK 0x4 #define NOT_TRANSLATION_TABLE 0x8 #define HEADER_ID0 PPBUF_BASE2 #define HEADER_ID1 (PPBUF_BASE2 + 1) #define DISABLED_BLOCK0 (PPBUF_BASE2 + 0x170 + 4) #define DISABLED_BLOCK1 (PPBUF_BASE2 + 0x170 + 5) #define DISABLED_BLOCK2 (PPBUF_BASE2 + 0x170 + 6) #define DISABLED_BLOCK3 (PPBUF_BASE2 + 0x170 + 7) #define BLOCK_SIZE_0 (PPBUF_BASE2 + 0x1a0 + 2) #define BLOCK_SIZE_1 (PPBUF_BASE2 + 0x1a0 + 3) #define BLOCK_COUNT_0 (PPBUF_BASE2 + 0x1a0 + 4) #define BLOCK_COUNT_1 (PPBUF_BASE2 + 0x1a0 + 5) #define EBLOCK_COUNT_0 (PPBUF_BASE2 + 0x1a0 + 6) #define EBLOCK_COUNT_1 (PPBUF_BASE2 + 0x1a0 + 7) #define PAGE_SIZE_0 (PPBUF_BASE2 + 0x1a0 + 8) #define PAGE_SIZE_1 (PPBUF_BASE2 + 0x1a0 + 9) #define MS_Device_Type (PPBUF_BASE2 + 0x1D8) #define MS_4bit_Support (PPBUF_BASE2 + 0x1D3) #define setPS_NG 1 #define setPS_Error 0 #define PARALLEL_8BIT_IF 0x40 #define PARALLEL_4BIT_IF 0x00 #define SERIAL_IF 0x80 #define BUF_FULL 0x10 #define BUF_EMPTY 0x20 #define MEDIA_BUSY 0x80 #define FLASH_BUSY 0x40 #define DATA_ERROR 0x20 #define STS_UCDT 0x10 #define EXTRA_ERROR 0x08 #define STS_UCEX 0x04 #define FLAG_ERROR 0x02 #define STS_UCFG 0x01 #define MS_SHORT_DATA_LEN 32 #define FORMAT_SUCCESS 0 #define FORMAT_FAIL 1 #define FORMAT_IN_PROGRESS 2 #define MS_SET_BAD_BLOCK_FLG(ms_card) ((ms_card)->multi_flag |= 0x80) #define MS_CLR_BAD_BLOCK_FLG(ms_card) ((ms_card)->multi_flag &= 0x7F) #define MS_TST_BAD_BLOCK_FLG(ms_card) ((ms_card)->multi_flag & 0x80) void mspro_polling_format_status(struct rtsx_chip *chip); void mspro_stop_seq_mode(struct rtsx_chip *chip); int reset_ms_card(struct rtsx_chip *chip); int ms_rw(struct scsi_cmnd *srb, struct rtsx_chip *chip, u32 start_sector, u16 sector_cnt); int mspro_format(struct scsi_cmnd *srb, struct rtsx_chip *chip, int short_data_len, bool quick_format); void ms_free_l2p_tbl(struct rtsx_chip *chip); void ms_cleanup_work(struct rtsx_chip *chip); int ms_power_off_card3v3(struct rtsx_chip *chip); int release_ms_card(struct rtsx_chip *chip); #ifdef MS_DELAY_WRITE int ms_delay_write(struct rtsx_chip *chip); #endif #ifdef SUPPORT_MAGIC_GATE int mg_set_leaf_id(struct scsi_cmnd *srb, struct rtsx_chip *chip); int mg_get_local_EKB(struct scsi_cmnd *srb, struct rtsx_chip *chip); int mg_chg(struct scsi_cmnd *srb, struct rtsx_chip *chip); int mg_get_rsp_chg(struct scsi_cmnd *srb, struct rtsx_chip *chip); int mg_rsp(struct scsi_cmnd *srb, struct rtsx_chip *chip); int mg_get_ICV(struct scsi_cmnd *srb, struct rtsx_chip *chip); int mg_set_ICV(struct scsi_cmnd *srb, struct rtsx_chip *chip); #endif #endif /* __REALTEK_RTSX_MS_H */