/*
* vsp1_rpf.c -- R-Car VSP1 Read Pixel Formatter
*
* Copyright (C) 2013-2014 Renesas Electronics Corporation
*
* Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/device.h>
#include <media/v4l2-subdev.h>
#include "vsp1.h"
#include "vsp1_rwpf.h"
#include "vsp1_video.h"
#define RPF_MAX_WIDTH 8190
#define RPF_MAX_HEIGHT 8190
/* -----------------------------------------------------------------------------
* Device Access
*/
static inline u32 vsp1_rpf_read(struct vsp1_rwpf *rpf, u32 reg)
{
return vsp1_read(rpf->entity.vsp1,
reg + rpf->entity.index * VI6_RPF_OFFSET);
}
static inline void vsp1_rpf_write(struct vsp1_rwpf *rpf, u32 reg, u32 data)
{
vsp1_write(rpf->entity.vsp1,
reg + rpf->entity.index * VI6_RPF_OFFSET, data);
}
/* -----------------------------------------------------------------------------
* Controls
*/
static int rpf_s_ctrl(struct v4l2_ctrl *ctrl)
{
struct vsp1_rwpf *rpf =
container_of(ctrl->handler, struct vsp1_rwpf, ctrls);
struct vsp1_pipeline *pipe;
if (!vsp1_entity_is_streaming(&rpf->entity))
return 0;
switch (ctrl->id) {
case V4L2_CID_ALPHA_COMPONENT:
vsp1_rpf_write(rpf, VI6_RPF_VRTCOL_SET,
ctrl->val << VI6_RPF_VRTCOL_SET_LAYA_SHIFT);
pipe = to_vsp1_pipeline(&rpf->entity.subdev.entity);
vsp1_pipeline_propagate_alpha(pipe, &rpf->entity, ctrl->val);
break;
}
return 0;
}
static const struct v4l2_ctrl_ops rpf_ctrl_ops = {
.s_ctrl = rpf_s_ctrl,
};
/* -----------------------------------------------------------------------------
* V4L2 Subdevice Core Operations
*/
static int rpf_s_stream(struct v4l2_subdev *subdev, int enable)
{
struct vsp1_rwpf *rpf = to_rwpf(subdev);
const struct vsp1_format_info *fmtinfo = rpf->video.fmtinfo;
const struct v4l2_pix_format_mplane *format = &rpf->video.format;
const struct v4l2_rect *crop = &rpf->crop;
u32 pstride;
u32 infmt;
int ret;
ret = vsp1_entity_set_streaming(&rpf->entity, enable);
if (ret < 0)
return ret;
if (!enable)
return 0;
/* Source size, stride and crop offsets.
*
* The crop offsets correspond to the location of the crop rectangle top
* left corner in the plane buffer. Only two offsets are needed, as
* planes 2 and 3 always have identical strides.
*/
vsp1_rpf_write(rpf, VI6_RPF_SRC_BSIZE,
(crop->width << VI6_RPF_SRC_BSIZE_BHSIZE_SHIFT) |
(crop->height << VI6_RPF_SRC_BSIZE_BVSIZE_SHIFT));
vsp1_rpf_write(rpf, VI6_RPF_SRC_ESIZE,
(crop->width << VI6_RPF_SRC_ESIZE_EHSIZE_SHIFT) |
(crop->height << VI6_RPF_SRC_ESIZE_EVSIZE_SHIFT));
rpf->offsets[0] = crop->top * format->plane_fmt[0].bytesperline
+ crop->left * fmtinfo->bpp[0] / 8;
pstride = format->plane_fmt[0].bytesperline
<< VI6_RPF_SRCM_PSTRIDE_Y_SHIFT;
vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_Y,
rpf->buf_addr[0] + rpf->offsets[0]);
if (format->num_planes > 1) {
rpf->offsets[1] = crop->top * format->plane_fmt[1].bytesperline
+ crop->left * fmtinfo->bpp[1] / 8;
pstride |= format->plane_fmt[1].bytesperline
<< VI6_RPF_SRCM_PSTRIDE_C_SHIFT;
vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_C0,
rpf->buf_addr[1] + rpf->offsets[1]);
if (format->num_planes > 2)
vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_C1,
rpf->buf_addr[2] + rpf->offsets[1]);
}
vsp1_rpf_write(rpf, VI6_RPF_SRCM_PSTRIDE, pstride);
/* Format */
infmt = VI6_RPF_INFMT_CIPM
| (fmtinfo->hwfmt << VI6_RPF_INFMT_RDFMT_SHIFT);
if (fmtinfo->swap_yc)
infmt |= VI6_RPF_INFMT_SPYCS;
if (fmtinfo->swap_uv)
infmt |= VI6_RPF_INFMT_SPUVS;
if (rpf->entity.formats[RWPF_PAD_SINK].code !=
rpf->entity.formats[RWPF_PAD_SOURCE].code)
infmt |= VI6_RPF_INFMT_CSC;
vsp1_rpf_write(rpf, VI6_RPF_INFMT, infmt);
vsp1_rpf_write(rpf, VI6_RPF_DSWAP, fmtinfo->swap);
/* Output location */
vsp1_rpf_write(rpf, VI6_RPF_LOC,
(rpf->location.left << VI6_RPF_LOC_HCOORD_SHIFT) |
(rpf->location.top << VI6_RPF_LOC_VCOORD_SHIFT));
/* Use the alpha channel (extended to 8 bits) when available or an
* alpha value set through the V4L2_CID_ALPHA_COMPONENT control
* otherwise. Disable color keying.
*/
vsp1_rpf_write(rpf, VI6_RPF_ALPH_SEL, VI6_RPF_ALPH_SEL_AEXT_EXT |
(fmtinfo->alpha ? VI6_RPF_ALPH_SEL_ASEL_PACKED
: VI6_RPF_ALPH_SEL_ASEL_FIXED));
vsp1_rpf_write(rpf, VI6_RPF_MSK_CTRL, 0);
vsp1_rpf_write(rpf, VI6_RPF_CKEY_CTRL, 0);
return 0;
}
/* -----------------------------------------------------------------------------
* V4L2 Subdevice Operations
*/
static struct v4l2_subdev_video_ops rpf_video_ops = {
.s_stream = rpf_s_stream,
};
static struct v4l2_subdev_pad_ops rpf_pad_ops = {
.enum_mbus_code = vsp1_rwpf_enum_mbus_code,
.enum_frame_size = vsp1_rwpf_enum_frame_size,
.get_fmt = vsp1_rwpf_get_format,
.set_fmt = vsp1_rwpf_set_format,
.get_selection = vsp1_rwpf_get_selection,
.set_selection = vsp1_rwpf_set_selection,
};
static struct v4l2_subdev_ops rpf_ops = {
.video = &rpf_video_ops,
.pad = &rpf_pad_ops,
};
/* -----------------------------------------------------------------------------
* Video Device Operations
*/
static void rpf_vdev_queue(struct vsp1_video *video,
struct vsp1_video_buffer *buf)
{
struct vsp1_rwpf *rpf = container_of(video, struct vsp1_rwpf, video);
unsigned int i;
for (i = 0; i < 3; ++i)
rpf->buf_addr[i] = buf->addr[i];
if (!vsp1_entity_is_streaming(&rpf->entity))
return;
vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_Y,
buf->addr[0] + rpf->offsets[0]);
if (buf->buf.num_planes > 1)
vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_C0,
buf->addr[1] + rpf->offsets[1]);
if (buf->buf.num_planes > 2)
vsp1_rpf_write(rpf, VI6_RPF_SRCM_ADDR_C1,
buf->addr[2] + rpf->offsets[1]);
}
static const struct vsp1_video_operations rpf_vdev_ops = {
.queue = rpf_vdev_queue,
};
/* -----------------------------------------------------------------------------
* Initialization and Cleanup
*/
struct vsp1_rwpf *vsp1_rpf_create(struct vsp1_device *vsp1, unsigned int index)
{
struct v4l2_subdev *subdev;
struct vsp1_video *video;
struct vsp1_rwpf *rpf;
int ret;
rpf = devm_kzalloc(vsp1->dev, sizeof(*rpf), GFP_KERNEL);
if (rpf == NULL)
return ERR_PTR(-ENOMEM);
rpf->max_width = RPF_MAX_WIDTH;
rpf->max_height = RPF_MAX_HEIGHT;
rpf->entity.type = VSP1_ENTITY_RPF;
rpf->entity.index = index;
ret = vsp1_entity_init(vsp1, &rpf->entity, 2);
if (ret < 0)
return ERR_PTR(ret);
/* Initialize the V4L2 subdev. */
subdev = &rpf->entity.subdev;
v4l2_subdev_init(subdev, &rpf_ops);
subdev->entity.ops = &vsp1_media_ops;
subdev->internal_ops = &vsp1_subdev_internal_ops;
snprintf(subdev->name, sizeof(subdev->name), "%s rpf.%u",
dev_name(vsp1->dev), index);
v4l2_set_subdevdata(subdev, rpf);
subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
vsp1_entity_init_formats(subdev, NULL);
/* Initialize the control handler. */
v4l2_ctrl_handler_init(&rpf->ctrls, 1);
v4l2_ctrl_new_std(&rpf->ctrls, &rpf_ctrl_ops, V4L2_CID_ALPHA_COMPONENT,
0, 255, 1, 255);
rpf->entity.subdev.ctrl_handler = &rpf->ctrls;
if (rpf->ctrls.error) {
dev_err(vsp1->dev, "rpf%u: failed to initialize controls\n",
index);
ret = rpf->ctrls.error;
goto error;
}
/* Initialize the video device. */
video = &rpf->video;
video->type = V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE;
video->vsp1 = vsp1;
video->ops = &rpf_vdev_ops;
ret = vsp1_video_init(video, &rpf->entity);
if (ret < 0)
goto error;
rpf->entity.video = video;
/* Connect the video device to the RPF. */
ret = media_entity_create_link(&rpf->video.video.entity, 0,
&rpf->entity.subdev.entity,
RWPF_PAD_SINK,
MEDIA_LNK_FL_ENABLED |
MEDIA_LNK_FL_IMMUTABLE);
if (ret < 0)
goto error;
return rpf;
error:
vsp1_entity_destroy(&rpf->entity);
return ERR_PTR(ret);
}