#include <linux/linkage.h> #include <linux/errno.h> #include <linux/signal.h> #include <linux/sched.h> #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/timex.h> #include <linux/random.h> #include <linux/init.h> #include <linux/kernel_stat.h> #include <linux/syscore_ops.h> #include <linux/bitops.h> #include <linux/acpi.h> #include <linux/io.h> #include <linux/delay.h> #include <linux/atomic.h> #include <asm/timer.h> #include <asm/hw_irq.h> #include <asm/pgtable.h> #include <asm/desc.h> #include <asm/apic.h> #include <asm/i8259.h> /* * This is the 'legacy' 8259A Programmable Interrupt Controller, * present in the majority of PC/AT boxes. * plus some generic x86 specific things if generic specifics makes * any sense at all. */ static void init_8259A(int auto_eoi); static int i8259A_auto_eoi; DEFINE_RAW_SPINLOCK(i8259A_lock); /* * 8259A PIC functions to handle ISA devices: */ /* * This contains the irq mask for both 8259A irq controllers, */ unsigned int cached_irq_mask = 0xffff; /* * Not all IRQs can be routed through the IO-APIC, eg. on certain (older) * boards the timer interrupt is not really connected to any IO-APIC pin, * it's fed to the master 8259A's IR0 line only. * * Any '1' bit in this mask means the IRQ is routed through the IO-APIC. * this 'mixed mode' IRQ handling costs nothing because it's only used * at IRQ setup time. */ unsigned long io_apic_irqs; static void mask_8259A_irq(unsigned int irq) { unsigned int mask = 1 << irq; unsigned long flags; raw_spin_lock_irqsave(&i8259A_lock, flags); cached_irq_mask |= mask; if (irq & 8) outb(cached_slave_mask, PIC_SLAVE_IMR); else outb(cached_master_mask, PIC_MASTER_IMR); raw_spin_unlock_irqrestore(&i8259A_lock, flags); } static void disable_8259A_irq(struct irq_data *data) { mask_8259A_irq(data->irq); } static void unmask_8259A_irq(unsigned int irq) { unsigned int mask = ~(1 << irq); unsigned long flags; raw_spin_lock_irqsave(&i8259A_lock, flags); cached_irq_mask &= mask; if (irq & 8) outb(cached_slave_mask, PIC_SLAVE_IMR); else outb(cached_master_mask, PIC_MASTER_IMR); raw_spin_unlock_irqrestore(&i8259A_lock, flags); } static void enable_8259A_irq(struct irq_data *data) { unmask_8259A_irq(data->irq); } static int i8259A_irq_pending(unsigned int irq) { unsigned int mask = 1<<irq; unsigned long flags; int ret; raw_spin_lock_irqsave(&i8259A_lock, flags); if (irq < 8) ret = inb(PIC_MASTER_CMD) & mask; else ret = inb(PIC_SLAVE_CMD) & (mask >> 8); raw_spin_unlock_irqrestore(&i8259A_lock, flags); return ret; } static void make_8259A_irq(unsigned int irq) { disable_irq_nosync(irq); io_apic_irqs &= ~(1<<irq); irq_set_chip_and_handler(irq, &i8259A_chip, handle_level_irq); enable_irq(irq); } /* * This function assumes to be called rarely. Switching between * 8259A registers is slow. * This has to be protected by the irq controller spinlock * before being called. */ static inline int i8259A_irq_real(unsigned int irq) { int value; int irqmask = 1<<irq; if (irq < 8) { outb(0x0B, PIC_MASTER_CMD); /* ISR register */ value = inb(PIC_MASTER_CMD) & irqmask; outb(0x0A, PIC_MASTER_CMD); /* back to the IRR register */ return value; } outb(0x0B, PIC_SLAVE_CMD); /* ISR register */ value = inb(PIC_SLAVE_CMD) & (irqmask >> 8); outb(0x0A, PIC_SLAVE_CMD); /* back to the IRR register */ return value; } /* * Careful! The 8259A is a fragile beast, it pretty * much _has_ to be done exactly like this (mask it * first, _then_ send the EOI, and the order of EOI * to the two 8259s is important! */ static void mask_and_ack_8259A(struct irq_data *data) { unsigned int irq = data->irq; unsigned int irqmask = 1 << irq; unsigned long flags; raw_spin_lock_irqsave(&i8259A_lock, flags); /* * Lightweight spurious IRQ detection. We do not want * to overdo spurious IRQ handling - it's usually a sign * of hardware problems, so we only do the checks we can * do without slowing down good hardware unnecessarily. * * Note that IRQ7 and IRQ15 (the two spurious IRQs * usually resulting from the 8259A-1|2 PICs) occur * even if the IRQ is masked in the 8259A. Thus we * can check spurious 8259A IRQs without doing the * quite slow i8259A_irq_real() call for every IRQ. * This does not cover 100% of spurious interrupts, * but should be enough to warn the user that there * is something bad going on ... */ if (cached_irq_mask & irqmask) goto spurious_8259A_irq; cached_irq_mask |= irqmask; handle_real_irq: if (irq & 8) { inb(PIC_SLAVE_IMR); /* DUMMY - (do we need this?) */ outb(cached_slave_mask, PIC_SLAVE_IMR); /* 'Specific EOI' to slave */ outb(0x60+(irq&7), PIC_SLAVE_CMD); /* 'Specific EOI' to master-IRQ2 */ outb(0x60+PIC_CASCADE_IR, PIC_MASTER_CMD); } else { inb(PIC_MASTER_IMR); /* DUMMY - (do we need this?) */ outb(cached_master_mask, PIC_MASTER_IMR); outb(0x60+irq, PIC_MASTER_CMD); /* 'Specific EOI to master */ } raw_spin_unlock_irqrestore(&i8259A_lock, flags); return; spurious_8259A_irq: /* * this is the slow path - should happen rarely. */ if (i8259A_irq_real(irq)) /* * oops, the IRQ _is_ in service according to the * 8259A - not spurious, go handle it. */ goto handle_real_irq; { static int spurious_irq_mask; /* * At this point we can be sure the IRQ is spurious, * lets ACK and report it. [once per IRQ] */ if (!(spurious_irq_mask & irqmask)) { printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq); spurious_irq_mask |= irqmask; } atomic_inc(&irq_err_count); /* * Theoretically we do not have to handle this IRQ, * but in Linux this does not cause problems and is * simpler for us. */ goto handle_real_irq; } } struct irq_chip i8259A_chip = { .name = "XT-PIC", .irq_mask = disable_8259A_irq, .irq_disable = disable_8259A_irq, .irq_unmask = enable_8259A_irq, .irq_mask_ack = mask_and_ack_8259A, }; static char irq_trigger[2]; /** * ELCR registers (0x4d0, 0x4d1) control edge/level of IRQ */ static void restore_ELCR(char *trigger) { outb(trigger[0], 0x4d0); outb(trigger[1], 0x4d1); } static void save_ELCR(char *trigger) { /* IRQ 0,1,2,8,13 are marked as reserved */ trigger[0] = inb(0x4d0) & 0xF8; trigger[1] = inb(0x4d1) & 0xDE; } static void i8259A_resume(void) { init_8259A(i8259A_auto_eoi); restore_ELCR(irq_trigger); } static int i8259A_suspend(void) { save_ELCR(irq_trigger); return 0; } static void i8259A_shutdown(void) { /* Put the i8259A into a quiescent state that * the kernel initialization code can get it * out of. */ outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ } static struct syscore_ops i8259_syscore_ops = { .suspend = i8259A_suspend, .resume = i8259A_resume, .shutdown = i8259A_shutdown, }; static void mask_8259A(void) { unsigned long flags; raw_spin_lock_irqsave(&i8259A_lock, flags); outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ raw_spin_unlock_irqrestore(&i8259A_lock, flags); } static void unmask_8259A(void) { unsigned long flags; raw_spin_lock_irqsave(&i8259A_lock, flags); outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ raw_spin_unlock_irqrestore(&i8259A_lock, flags); } static void init_8259A(int auto_eoi) { unsigned long flags; unsigned char probe_val = ~(1 << PIC_CASCADE_IR); unsigned char new_val; i8259A_auto_eoi = auto_eoi; raw_spin_lock_irqsave(&i8259A_lock, flags); /* * Check to see if we have a PIC. * Mask all except the cascade and read * back the value we just wrote. If we don't * have a PIC, we will read 0xff as opposed to the * value we wrote. */ outb(0xff, PIC_SLAVE_IMR); /* mask all of 8259A-2 */ outb(probe_val, PIC_MASTER_IMR); new_val = inb(PIC_MASTER_IMR); if (new_val != probe_val) { printk(KERN_INFO "Using NULL legacy PIC\n"); legacy_pic = &null_legacy_pic; raw_spin_unlock_irqrestore(&i8259A_lock, flags); return; } outb(0xff, PIC_MASTER_IMR); /* mask all of 8259A-1 */ /* * outb_pic - this has to work on a wide range of PC hardware. */ outb_pic(0x11, PIC_MASTER_CMD); /* ICW1: select 8259A-1 init */ /* ICW2: 8259A-1 IR0-7 mapped to 0x30-0x37 */ outb_pic(IRQ0_VECTOR, PIC_MASTER_IMR); /* 8259A-1 (the master) has a slave on IR2 */ outb_pic(1U << PIC_CASCADE_IR, PIC_MASTER_IMR); if (auto_eoi) /* master does Auto EOI */ outb_pic(MASTER_ICW4_DEFAULT | PIC_ICW4_AEOI, PIC_MASTER_IMR); else /* master expects normal EOI */ outb_pic(MASTER_ICW4_DEFAULT, PIC_MASTER_IMR); outb_pic(0x11, PIC_SLAVE_CMD); /* ICW1: select 8259A-2 init */ /* ICW2: 8259A-2 IR0-7 mapped to IRQ8_VECTOR */ outb_pic(IRQ8_VECTOR, PIC_SLAVE_IMR); /* 8259A-2 is a slave on master's IR2 */ outb_pic(PIC_CASCADE_IR, PIC_SLAVE_IMR); /* (slave's support for AEOI in flat mode is to be investigated) */ outb_pic(SLAVE_ICW4_DEFAULT, PIC_SLAVE_IMR); if (auto_eoi) /* * In AEOI mode we just have to mask the interrupt * when acking. */ i8259A_chip.irq_mask_ack = disable_8259A_irq; else i8259A_chip.irq_mask_ack = mask_and_ack_8259A; udelay(100); /* wait for 8259A to initialize */ outb(cached_master_mask, PIC_MASTER_IMR); /* restore master IRQ mask */ outb(cached_slave_mask, PIC_SLAVE_IMR); /* restore slave IRQ mask */ raw_spin_unlock_irqrestore(&i8259A_lock, flags); } /* * make i8259 a driver so that we can select pic functions at run time. the goal * is to make x86 binary compatible among pc compatible and non-pc compatible * platforms, such as x86 MID. */ static void legacy_pic_noop(void) { }; static void legacy_pic_uint_noop(unsigned int unused) { }; static void legacy_pic_int_noop(int unused) { }; static int legacy_pic_irq_pending_noop(unsigned int irq) { return 0; } struct legacy_pic null_legacy_pic = { .nr_legacy_irqs = 0, .chip = &dummy_irq_chip, .mask = legacy_pic_uint_noop, .unmask = legacy_pic_uint_noop, .mask_all = legacy_pic_noop, .restore_mask = legacy_pic_noop, .init = legacy_pic_int_noop, .irq_pending = legacy_pic_irq_pending_noop, .make_irq = legacy_pic_uint_noop, }; struct legacy_pic default_legacy_pic = { .nr_legacy_irqs = NR_IRQS_LEGACY, .chip = &i8259A_chip, .mask = mask_8259A_irq, .unmask = unmask_8259A_irq, .mask_all = mask_8259A, .restore_mask = unmask_8259A, .init = init_8259A, .irq_pending = i8259A_irq_pending, .make_irq = make_8259A_irq, }; struct legacy_pic *legacy_pic = &default_legacy_pic; static int __init i8259A_init_ops(void) { if (legacy_pic == &default_legacy_pic) register_syscore_ops(&i8259_syscore_ops); return 0; } device_initcall(i8259A_init_ops);