/* * PCI bus setup for Marvell mv64360/mv64460 host bridges (Discovery) * * Author: Dale Farnsworth <dale@farnsworth.org> * * 2007 (c) MontaVista, Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. */ #include <linux/stddef.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/stat.h> #include <linux/pci.h> #include <asm/prom.h> #include <asm/pci-bridge.h> #define PCI_HEADER_TYPE_INVALID 0x7f /* Invalid PCI header type */ #ifdef CONFIG_SYSFS /* 32-bit hex or dec stringified number + '\n' */ #define MV64X60_VAL_LEN_MAX 11 #define MV64X60_PCICFG_CPCI_HOTSWAP 0x68 static ssize_t mv64x60_hs_reg_read(struct file *filp, struct kobject *kobj, struct bin_attribute *attr, char *buf, loff_t off, size_t count) { struct pci_dev *phb; u32 v; if (off > 0) return 0; if (count < MV64X60_VAL_LEN_MAX) return -EINVAL; phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); if (!phb) return -ENODEV; pci_read_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, &v); pci_dev_put(phb); return sprintf(buf, "0x%08x\n", v); } static ssize_t mv64x60_hs_reg_write(struct file *filp, struct kobject *kobj, struct bin_attribute *attr, char *buf, loff_t off, size_t count) { struct pci_dev *phb; u32 v; if (off > 0) return 0; if (count <= 0) return -EINVAL; if (sscanf(buf, "%i", &v) != 1) return -EINVAL; phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0)); if (!phb) return -ENODEV; pci_write_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, v); pci_dev_put(phb); return count; } static struct bin_attribute mv64x60_hs_reg_attr = { /* Hotswap register */ .attr = { .name = "hs_reg", .mode = S_IRUGO | S_IWUSR, }, .size = MV64X60_VAL_LEN_MAX, .read = mv64x60_hs_reg_read, .write = mv64x60_hs_reg_write, }; static int __init mv64x60_sysfs_init(void) { struct device_node *np; struct platform_device *pdev; const unsigned int *prop; np = of_find_compatible_node(NULL, NULL, "marvell,mv64360"); if (!np) return 0; prop = of_get_property(np, "hs_reg_valid", NULL); of_node_put(np); pdev = platform_device_register_simple("marvell,mv64360", 0, NULL, 0); if (IS_ERR(pdev)) return PTR_ERR(pdev); return sysfs_create_bin_file(&pdev->dev.kobj, &mv64x60_hs_reg_attr); } subsys_initcall(mv64x60_sysfs_init); #endif /* CONFIG_SYSFS */ static void mv64x60_pci_fixup_early(struct pci_dev *dev) { /* * Set the host bridge hdr_type to an invalid value so that * pci_setup_device() will ignore the host bridge. */ dev->hdr_type = PCI_HEADER_TYPE_INVALID; } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360, mv64x60_pci_fixup_early); DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64460, mv64x60_pci_fixup_early); static int __init mv64x60_add_bridge(struct device_node *dev) { int len; struct pci_controller *hose; struct resource rsrc; const int *bus_range; int primary; memset(&rsrc, 0, sizeof(rsrc)); /* Fetch host bridge registers address */ if (of_address_to_resource(dev, 0, &rsrc)) { printk(KERN_ERR "No PCI reg property in device tree\n"); return -ENODEV; } /* Get bus range if any */ bus_range = of_get_property(dev, "bus-range", &len); if (bus_range == NULL || len < 2 * sizeof(int)) printk(KERN_WARNING "Can't get bus-range for %s, assume" " bus 0\n", dev->full_name); hose = pcibios_alloc_controller(dev); if (!hose) return -ENOMEM; hose->first_busno = bus_range ? bus_range[0] : 0; hose->last_busno = bus_range ? bus_range[1] : 0xff; setup_indirect_pci(hose, rsrc.start, rsrc.start + 4, 0); hose->self_busno = hose->first_busno; printk(KERN_INFO "Found MV64x60 PCI host bridge at 0x%016llx. " "Firmware bus number: %d->%d\n", (unsigned long long)rsrc.start, hose->first_busno, hose->last_busno); /* Interpret the "ranges" property */ /* This also maps the I/O region and sets isa_io/mem_base */ primary = (hose->first_busno == 0); pci_process_bridge_OF_ranges(hose, dev, primary); return 0; } void __init mv64x60_pci_init(void) { struct device_node *np; for_each_compatible_node(np, "pci", "marvell,mv64360-pci") mv64x60_add_bridge(np); }