/* * Low level TLB miss handlers for Book3E * * Copyright (C) 2008-2009 * Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ #include <asm/processor.h> #include <asm/reg.h> #include <asm/page.h> #include <asm/mmu.h> #include <asm/ppc_asm.h> #include <asm/asm-offsets.h> #include <asm/cputable.h> #include <asm/pgtable.h> #include <asm/exception-64e.h> #include <asm/ppc-opcode.h> #include <asm/kvm_asm.h> #include <asm/kvm_booke_hv_asm.h> #ifdef CONFIG_PPC_64K_PAGES #define VPTE_PMD_SHIFT (PTE_INDEX_SIZE+1) #else #define VPTE_PMD_SHIFT (PTE_INDEX_SIZE) #endif #define VPTE_PUD_SHIFT (VPTE_PMD_SHIFT + PMD_INDEX_SIZE) #define VPTE_PGD_SHIFT (VPTE_PUD_SHIFT + PUD_INDEX_SIZE) #define VPTE_INDEX_SIZE (VPTE_PGD_SHIFT + PGD_INDEX_SIZE) /********************************************************************** * * * TLB miss handling for Book3E with a bolted linear mapping * * No virtual page table, no nested TLB misses * * * **********************************************************************/ /* * Note that, unlike non-bolted handlers, TLB_EXFRAME is not * modified by the TLB miss handlers themselves, since the TLB miss * handler code will not itself cause a recursive TLB miss. * * TLB_EXFRAME will be modified when crit/mc/debug exceptions are * entered/exited. */ .macro tlb_prolog_bolted intnum addr mtspr SPRN_SPRG_GEN_SCRATCH,r12 mfspr r12,SPRN_SPRG_TLB_EXFRAME std r13,EX_TLB_R13(r12) std r10,EX_TLB_R10(r12) mfspr r13,SPRN_SPRG_PACA mfcr r10 std r11,EX_TLB_R11(r12) #ifdef CONFIG_KVM_BOOKE_HV BEGIN_FTR_SECTION mfspr r11, SPRN_SRR1 END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV) #endif DO_KVM \intnum, SPRN_SRR1 std r16,EX_TLB_R16(r12) mfspr r16,\addr /* get faulting address */ std r14,EX_TLB_R14(r12) ld r14,PACAPGD(r13) std r15,EX_TLB_R15(r12) std r10,EX_TLB_CR(r12) TLB_MISS_PROLOG_STATS .endm .macro tlb_epilog_bolted ld r14,EX_TLB_CR(r12) ld r10,EX_TLB_R10(r12) ld r11,EX_TLB_R11(r12) ld r13,EX_TLB_R13(r12) mtcr r14 ld r14,EX_TLB_R14(r12) ld r15,EX_TLB_R15(r12) TLB_MISS_RESTORE_STATS ld r16,EX_TLB_R16(r12) mfspr r12,SPRN_SPRG_GEN_SCRATCH .endm /* Data TLB miss */ START_EXCEPTION(data_tlb_miss_bolted) tlb_prolog_bolted BOOKE_INTERRUPT_DTLB_MISS SPRN_DEAR /* We need _PAGE_PRESENT and _PAGE_ACCESSED set */ /* We do the user/kernel test for the PID here along with the RW test */ /* We pre-test some combination of permissions to avoid double * faults: * * We move the ESR:ST bit into the position of _PAGE_BAP_SW in the PTE * ESR_ST is 0x00800000 * _PAGE_BAP_SW is 0x00000010 * So the shift is >> 19. This tests for supervisor writeability. * If the page happens to be supervisor writeable and not user * writeable, we will take a new fault later, but that should be * a rare enough case. * * We also move ESR_ST in _PAGE_DIRTY position * _PAGE_DIRTY is 0x00001000 so the shift is >> 11 * * MAS1 is preset for all we need except for TID that needs to * be cleared for kernel translations */ mfspr r11,SPRN_ESR srdi r15,r16,60 /* get region */ rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4 bne- dtlb_miss_fault_bolted /* Bail if fault addr is invalid */ rlwinm r10,r11,32-19,27,27 rlwimi r10,r11,32-16,19,19 cmpwi r15,0 /* user vs kernel check */ ori r10,r10,_PAGE_PRESENT oris r11,r10,_PAGE_ACCESSED@h TLB_MISS_STATS_SAVE_INFO_BOLTED bne tlb_miss_kernel_bolted tlb_miss_common_bolted: /* * This is the guts of the TLB miss handler for bolted-linear. * We are entered with: * * r16 = faulting address * r15 = crap (free to use) * r14 = page table base * r13 = PACA * r11 = PTE permission mask * r10 = crap (free to use) */ rldicl r15,r16,64-PGDIR_SHIFT+3,64-PGD_INDEX_SIZE-3 cmpldi cr0,r14,0 clrrdi r15,r15,3 beq tlb_miss_fault_bolted /* No PGDIR, bail */ BEGIN_MMU_FTR_SECTION /* Set the TLB reservation and search for existing entry. Then load * the entry. */ PPC_TLBSRX_DOT(0,R16) ldx r14,r14,r15 /* grab pgd entry */ beq tlb_miss_done_bolted /* tlb exists already, bail */ MMU_FTR_SECTION_ELSE ldx r14,r14,r15 /* grab pgd entry */ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV) #ifndef CONFIG_PPC_64K_PAGES rldicl r15,r16,64-PUD_SHIFT+3,64-PUD_INDEX_SIZE-3 clrrdi r15,r15,3 cmpdi cr0,r14,0 bge tlb_miss_fault_bolted /* Bad pgd entry or hugepage; bail */ ldx r14,r14,r15 /* grab pud entry */ #endif /* CONFIG_PPC_64K_PAGES */ rldicl r15,r16,64-PMD_SHIFT+3,64-PMD_INDEX_SIZE-3 clrrdi r15,r15,3 cmpdi cr0,r14,0 bge tlb_miss_fault_bolted ldx r14,r14,r15 /* Grab pmd entry */ rldicl r15,r16,64-PAGE_SHIFT+3,64-PTE_INDEX_SIZE-3 clrrdi r15,r15,3 cmpdi cr0,r14,0 bge tlb_miss_fault_bolted ldx r14,r14,r15 /* Grab PTE, normal (!huge) page */ /* Check if required permissions are met */ andc. r15,r11,r14 rldicr r15,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT bne- tlb_miss_fault_bolted /* Now we build the MAS: * * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG * MAS 1 : Almost fully setup * - PID already updated by caller if necessary * - TSIZE need change if !base page size, not * yet implemented for now * MAS 2 : Defaults not useful, need to be redone * MAS 3+7 : Needs to be done */ clrrdi r11,r16,12 /* Clear low crap in EA */ clrldi r15,r15,12 /* Clear crap at the top */ rlwimi r11,r14,32-19,27,31 /* Insert WIMGE */ rlwimi r15,r14,32-8,22,25 /* Move in U bits */ mtspr SPRN_MAS2,r11 andi. r11,r14,_PAGE_DIRTY rlwimi r15,r14,32-2,26,31 /* Move in BAP bits */ /* Mask out SW and UW if !DIRTY (XXX optimize this !) */ bne 1f li r11,MAS3_SW|MAS3_UW andc r15,r15,r11 1: mtspr SPRN_MAS7_MAS3,r15 tlbwe tlb_miss_done_bolted: TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK) tlb_epilog_bolted rfi itlb_miss_kernel_bolted: li r11,_PAGE_PRESENT|_PAGE_BAP_SX /* Base perm */ oris r11,r11,_PAGE_ACCESSED@h tlb_miss_kernel_bolted: mfspr r10,SPRN_MAS1 ld r14,PACA_KERNELPGD(r13) cmpldi cr0,r15,8 /* Check for vmalloc region */ rlwinm r10,r10,0,16,1 /* Clear TID */ mtspr SPRN_MAS1,r10 beq+ tlb_miss_common_bolted tlb_miss_fault_bolted: /* We need to check if it was an instruction miss */ andi. r10,r11,_PAGE_EXEC|_PAGE_BAP_SX bne itlb_miss_fault_bolted dtlb_miss_fault_bolted: TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT) tlb_epilog_bolted b exc_data_storage_book3e itlb_miss_fault_bolted: TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT) tlb_epilog_bolted b exc_instruction_storage_book3e /* Instruction TLB miss */ START_EXCEPTION(instruction_tlb_miss_bolted) tlb_prolog_bolted BOOKE_INTERRUPT_ITLB_MISS SPRN_SRR0 rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4 srdi r15,r16,60 /* get region */ TLB_MISS_STATS_SAVE_INFO_BOLTED bne- itlb_miss_fault_bolted li r11,_PAGE_PRESENT|_PAGE_EXEC /* Base perm */ /* We do the user/kernel test for the PID here along with the RW test */ cmpldi cr0,r15,0 /* Check for user region */ oris r11,r11,_PAGE_ACCESSED@h beq tlb_miss_common_bolted b itlb_miss_kernel_bolted #ifdef CONFIG_PPC_FSL_BOOK3E /* * TLB miss handling for e6500 and derivatives, using hardware tablewalk. * * Linear mapping is bolted: no virtual page table or nested TLB misses * Indirect entries in TLB1, hardware loads resulting direct entries * into TLB0 * No HES or NV hint on TLB1, so we need to do software round-robin * No tlbsrx. so we need a spinlock, and we have to deal * with MAS-damage caused by tlbsx * 4K pages only */ START_EXCEPTION(instruction_tlb_miss_e6500) tlb_prolog_bolted BOOKE_INTERRUPT_ITLB_MISS SPRN_SRR0 ld r11,PACA_TCD_PTR(r13) srdi. r15,r16,60 /* get region */ ori r16,r16,1 TLB_MISS_STATS_SAVE_INFO_BOLTED bne tlb_miss_kernel_e6500 /* user/kernel test */ b tlb_miss_common_e6500 START_EXCEPTION(data_tlb_miss_e6500) tlb_prolog_bolted BOOKE_INTERRUPT_DTLB_MISS SPRN_DEAR ld r11,PACA_TCD_PTR(r13) srdi. r15,r16,60 /* get region */ rldicr r16,r16,0,62 TLB_MISS_STATS_SAVE_INFO_BOLTED bne tlb_miss_kernel_e6500 /* user vs kernel check */ /* * This is the guts of the TLB miss handler for e6500 and derivatives. * We are entered with: * * r16 = page of faulting address (low bit 0 if data, 1 if instruction) * r15 = crap (free to use) * r14 = page table base * r13 = PACA * r11 = tlb_per_core ptr * r10 = crap (free to use) */ tlb_miss_common_e6500: crmove cr2*4+2,cr0*4+2 /* cr2.eq != 0 if kernel address */ BEGIN_FTR_SECTION /* CPU_FTR_SMT */ /* * Search if we already have an indirect entry for that virtual * address, and if we do, bail out. * * MAS6:IND should be already set based on MAS4 */ 1: lbarx r15,0,r11 lhz r10,PACAPACAINDEX(r13) cmpdi r15,0 cmpdi cr1,r15,1 /* set cr1.eq = 0 for non-recursive */ addi r10,r10,1 bne 2f stbcx. r10,0,r11 bne 1b 3: .subsection 1 2: cmpd cr1,r15,r10 /* recursive lock due to mcheck/crit/etc? */ beq cr1,3b /* unlock will happen if cr1.eq = 0 */ lbz r15,0(r11) cmpdi r15,0 bne 2b b 1b .previous /* * Erratum A-008139 says that we can't use tlbwe to change * an indirect entry in any way (including replacing or * invalidating) if the other thread could be in the process * of a lookup. The workaround is to invalidate the entry * with tlbilx before overwriting. */ lbz r15,TCD_ESEL_NEXT(r11) rlwinm r10,r15,16,0xff0000 oris r10,r10,MAS0_TLBSEL(1)@h mtspr SPRN_MAS0,r10 isync tlbre mfspr r15,SPRN_MAS1 andis. r15,r15,MAS1_VALID@h beq 5f BEGIN_FTR_SECTION_NESTED(532) mfspr r10,SPRN_MAS8 rlwinm r10,r10,0,0x80000fff /* tgs,tlpid -> sgs,slpid */ mtspr SPRN_MAS5,r10 END_FTR_SECTION_NESTED(CPU_FTR_EMB_HV,CPU_FTR_EMB_HV,532) mfspr r10,SPRN_MAS1 rlwinm r15,r10,0,0x3fff0000 /* tid -> spid */ rlwimi r15,r10,20,0x00000003 /* ind,ts -> sind,sas */ mfspr r10,SPRN_MAS6 mtspr SPRN_MAS6,r15 mfspr r15,SPRN_MAS2 isync tlbilxva 0,r15 isync mtspr SPRN_MAS6,r10 5: BEGIN_FTR_SECTION_NESTED(532) li r10,0 mtspr SPRN_MAS8,r10 mtspr SPRN_MAS5,r10 END_FTR_SECTION_NESTED(CPU_FTR_EMB_HV,CPU_FTR_EMB_HV,532) tlbsx 0,r16 mfspr r10,SPRN_MAS1 andis. r15,r10,MAS1_VALID@h bne tlb_miss_done_e6500 FTR_SECTION_ELSE mfspr r10,SPRN_MAS1 ALT_FTR_SECTION_END_IFSET(CPU_FTR_SMT) oris r10,r10,MAS1_VALID@h beq cr2,4f rlwinm r10,r10,0,16,1 /* Clear TID */ 4: mtspr SPRN_MAS1,r10 /* Now, we need to walk the page tables. First check if we are in * range. */ rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4 bne- tlb_miss_fault_e6500 rldicl r15,r16,64-PGDIR_SHIFT+3,64-PGD_INDEX_SIZE-3 cmpldi cr0,r14,0 clrrdi r15,r15,3 beq- tlb_miss_fault_e6500 /* No PGDIR, bail */ ldx r14,r14,r15 /* grab pgd entry */ rldicl r15,r16,64-PUD_SHIFT+3,64-PUD_INDEX_SIZE-3 clrrdi r15,r15,3 cmpdi cr0,r14,0 bge tlb_miss_fault_e6500 /* Bad pgd entry or hugepage; bail */ ldx r14,r14,r15 /* grab pud entry */ rldicl r15,r16,64-PMD_SHIFT+3,64-PMD_INDEX_SIZE-3 clrrdi r15,r15,3 cmpdi cr0,r14,0 bge tlb_miss_fault_e6500 ldx r14,r14,r15 /* Grab pmd entry */ mfspr r10,SPRN_MAS0 cmpdi cr0,r14,0 bge tlb_miss_fault_e6500 /* Now we build the MAS for a 2M indirect page: * * MAS 0 : ESEL needs to be filled by software round-robin * MAS 1 : Fully set up * - PID already updated by caller if necessary * - TSIZE for now is base ind page size always * - TID already cleared if necessary * MAS 2 : Default not 2M-aligned, need to be redone * MAS 3+7 : Needs to be done */ ori r14,r14,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT) mtspr SPRN_MAS7_MAS3,r14 clrrdi r15,r16,21 /* make EA 2M-aligned */ mtspr SPRN_MAS2,r15 lbz r15,TCD_ESEL_NEXT(r11) lbz r16,TCD_ESEL_MAX(r11) lbz r14,TCD_ESEL_FIRST(r11) rlwimi r10,r15,16,0x00ff0000 /* insert esel_next into MAS0 */ addi r15,r15,1 /* increment esel_next */ mtspr SPRN_MAS0,r10 cmpw r15,r16 iseleq r15,r14,r15 /* if next == last use first */ stb r15,TCD_ESEL_NEXT(r11) tlbwe tlb_miss_done_e6500: .macro tlb_unlock_e6500 BEGIN_FTR_SECTION beq cr1,1f /* no unlock if lock was recursively grabbed */ li r15,0 isync stb r15,0(r11) 1: END_FTR_SECTION_IFSET(CPU_FTR_SMT) .endm tlb_unlock_e6500 TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK) tlb_epilog_bolted rfi tlb_miss_kernel_e6500: ld r14,PACA_KERNELPGD(r13) cmpldi cr1,r15,8 /* Check for vmalloc region */ beq+ cr1,tlb_miss_common_e6500 tlb_miss_fault_e6500: tlb_unlock_e6500 /* We need to check if it was an instruction miss */ andi. r16,r16,1 bne itlb_miss_fault_e6500 dtlb_miss_fault_e6500: TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT) tlb_epilog_bolted b exc_data_storage_book3e itlb_miss_fault_e6500: TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT) tlb_epilog_bolted b exc_instruction_storage_book3e #endif /* CONFIG_PPC_FSL_BOOK3E */ /********************************************************************** * * * TLB miss handling for Book3E with TLB reservation and HES support * * * **********************************************************************/ /* Data TLB miss */ START_EXCEPTION(data_tlb_miss) TLB_MISS_PROLOG /* Now we handle the fault proper. We only save DEAR in normal * fault case since that's the only interesting values here. * We could probably also optimize by not saving SRR0/1 in the * linear mapping case but I'll leave that for later */ mfspr r14,SPRN_ESR mfspr r16,SPRN_DEAR /* get faulting address */ srdi r15,r16,60 /* get region */ cmpldi cr0,r15,0xc /* linear mapping ? */ TLB_MISS_STATS_SAVE_INFO beq tlb_load_linear /* yes -> go to linear map load */ /* The page tables are mapped virtually linear. At this point, though, * we don't know whether we are trying to fault in a first level * virtual address or a virtual page table address. We can get that * from bit 0x1 of the region ID which we have set for a page table */ andi. r10,r15,0x1 bne- virt_page_table_tlb_miss std r14,EX_TLB_ESR(r12); /* save ESR */ std r16,EX_TLB_DEAR(r12); /* save DEAR */ /* We need _PAGE_PRESENT and _PAGE_ACCESSED set */ li r11,_PAGE_PRESENT oris r11,r11,_PAGE_ACCESSED@h /* We do the user/kernel test for the PID here along with the RW test */ cmpldi cr0,r15,0 /* Check for user region */ /* We pre-test some combination of permissions to avoid double * faults: * * We move the ESR:ST bit into the position of _PAGE_BAP_SW in the PTE * ESR_ST is 0x00800000 * _PAGE_BAP_SW is 0x00000010 * So the shift is >> 19. This tests for supervisor writeability. * If the page happens to be supervisor writeable and not user * writeable, we will take a new fault later, but that should be * a rare enough case. * * We also move ESR_ST in _PAGE_DIRTY position * _PAGE_DIRTY is 0x00001000 so the shift is >> 11 * * MAS1 is preset for all we need except for TID that needs to * be cleared for kernel translations */ rlwimi r11,r14,32-19,27,27 rlwimi r11,r14,32-16,19,19 beq normal_tlb_miss /* XXX replace the RMW cycles with immediate loads + writes */ 1: mfspr r10,SPRN_MAS1 cmpldi cr0,r15,8 /* Check for vmalloc region */ rlwinm r10,r10,0,16,1 /* Clear TID */ mtspr SPRN_MAS1,r10 beq+ normal_tlb_miss /* We got a crappy address, just fault with whatever DEAR and ESR * are here */ TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT) TLB_MISS_EPILOG_ERROR b exc_data_storage_book3e /* Instruction TLB miss */ START_EXCEPTION(instruction_tlb_miss) TLB_MISS_PROLOG /* If we take a recursive fault, the second level handler may need * to know whether we are handling a data or instruction fault in * order to get to the right store fault handler. We provide that * info by writing a crazy value in ESR in our exception frame */ li r14,-1 /* store to exception frame is done later */ /* Now we handle the fault proper. We only save DEAR in the non * linear mapping case since we know the linear mapping case will * not re-enter. We could indeed optimize and also not save SRR0/1 * in the linear mapping case but I'll leave that for later * * Faulting address is SRR0 which is already in r16 */ srdi r15,r16,60 /* get region */ cmpldi cr0,r15,0xc /* linear mapping ? */ TLB_MISS_STATS_SAVE_INFO beq tlb_load_linear /* yes -> go to linear map load */ /* We do the user/kernel test for the PID here along with the RW test */ li r11,_PAGE_PRESENT|_PAGE_EXEC /* Base perm */ oris r11,r11,_PAGE_ACCESSED@h cmpldi cr0,r15,0 /* Check for user region */ std r14,EX_TLB_ESR(r12) /* write crazy -1 to frame */ beq normal_tlb_miss li r11,_PAGE_PRESENT|_PAGE_BAP_SX /* Base perm */ oris r11,r11,_PAGE_ACCESSED@h /* XXX replace the RMW cycles with immediate loads + writes */ mfspr r10,SPRN_MAS1 cmpldi cr0,r15,8 /* Check for vmalloc region */ rlwinm r10,r10,0,16,1 /* Clear TID */ mtspr SPRN_MAS1,r10 beq+ normal_tlb_miss /* We got a crappy address, just fault */ TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT) TLB_MISS_EPILOG_ERROR b exc_instruction_storage_book3e /* * This is the guts of the first-level TLB miss handler for direct * misses. We are entered with: * * r16 = faulting address * r15 = region ID * r14 = crap (free to use) * r13 = PACA * r12 = TLB exception frame in PACA * r11 = PTE permission mask * r10 = crap (free to use) */ normal_tlb_miss: /* So we first construct the page table address. We do that by * shifting the bottom of the address (not the region ID) by * PAGE_SHIFT-3, clearing the bottom 3 bits (get a PTE ptr) and * or'ing the fourth high bit. * * NOTE: For 64K pages, we do things slightly differently in * order to handle the weird page table format used by linux */ ori r10,r15,0x1 #ifdef CONFIG_PPC_64K_PAGES /* For the top bits, 16 bytes per PTE */ rldicl r14,r16,64-(PAGE_SHIFT-4),PAGE_SHIFT-4+4 /* Now create the bottom bits as 0 in position 0x8000 and * the rest calculated for 8 bytes per PTE */ rldicl r15,r16,64-(PAGE_SHIFT-3),64-15 /* Insert the bottom bits in */ rlwimi r14,r15,0,16,31 #else rldicl r14,r16,64-(PAGE_SHIFT-3),PAGE_SHIFT-3+4 #endif sldi r15,r10,60 clrrdi r14,r14,3 or r10,r15,r14 BEGIN_MMU_FTR_SECTION /* Set the TLB reservation and search for existing entry. Then load * the entry. */ PPC_TLBSRX_DOT(0,R16) ld r14,0(r10) beq normal_tlb_miss_done MMU_FTR_SECTION_ELSE ld r14,0(r10) ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV) finish_normal_tlb_miss: /* Check if required permissions are met */ andc. r15,r11,r14 bne- normal_tlb_miss_access_fault /* Now we build the MAS: * * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG * MAS 1 : Almost fully setup * - PID already updated by caller if necessary * - TSIZE need change if !base page size, not * yet implemented for now * MAS 2 : Defaults not useful, need to be redone * MAS 3+7 : Needs to be done * * TODO: mix up code below for better scheduling */ clrrdi r11,r16,12 /* Clear low crap in EA */ rlwimi r11,r14,32-19,27,31 /* Insert WIMGE */ mtspr SPRN_MAS2,r11 /* Check page size, if not standard, update MAS1 */ rldicl r11,r14,64-8,64-8 #ifdef CONFIG_PPC_64K_PAGES cmpldi cr0,r11,BOOK3E_PAGESZ_64K #else cmpldi cr0,r11,BOOK3E_PAGESZ_4K #endif beq- 1f mfspr r11,SPRN_MAS1 rlwimi r11,r14,31,21,24 rlwinm r11,r11,0,21,19 mtspr SPRN_MAS1,r11 1: /* Move RPN in position */ rldicr r11,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT clrldi r15,r11,12 /* Clear crap at the top */ rlwimi r15,r14,32-8,22,25 /* Move in U bits */ rlwimi r15,r14,32-2,26,31 /* Move in BAP bits */ /* Mask out SW and UW if !DIRTY (XXX optimize this !) */ andi. r11,r14,_PAGE_DIRTY bne 1f li r11,MAS3_SW|MAS3_UW andc r15,r15,r11 1: BEGIN_MMU_FTR_SECTION srdi r16,r15,32 mtspr SPRN_MAS3,r15 mtspr SPRN_MAS7,r16 MMU_FTR_SECTION_ELSE mtspr SPRN_MAS7_MAS3,r15 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS) tlbwe normal_tlb_miss_done: /* We don't bother with restoring DEAR or ESR since we know we are * level 0 and just going back to userland. They are only needed * if you are going to take an access fault */ TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK) TLB_MISS_EPILOG_SUCCESS rfi normal_tlb_miss_access_fault: /* We need to check if it was an instruction miss */ andi. r10,r11,_PAGE_EXEC bne 1f ld r14,EX_TLB_DEAR(r12) ld r15,EX_TLB_ESR(r12) mtspr SPRN_DEAR,r14 mtspr SPRN_ESR,r15 TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT) TLB_MISS_EPILOG_ERROR b exc_data_storage_book3e 1: TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT) TLB_MISS_EPILOG_ERROR b exc_instruction_storage_book3e /* * This is the guts of the second-level TLB miss handler for direct * misses. We are entered with: * * r16 = virtual page table faulting address * r15 = region (top 4 bits of address) * r14 = crap (free to use) * r13 = PACA * r12 = TLB exception frame in PACA * r11 = crap (free to use) * r10 = crap (free to use) * * Note that this should only ever be called as a second level handler * with the current scheme when using SW load. * That means we can always get the original fault DEAR at * EX_TLB_DEAR-EX_TLB_SIZE(r12) * * It can be re-entered by the linear mapping miss handler. However, to * avoid too much complication, it will restart the whole fault at level * 0 so we don't care too much about clobbers * * XXX That code was written back when we couldn't clobber r14. We can now, * so we could probably optimize things a bit */ virt_page_table_tlb_miss: /* Are we hitting a kernel page table ? */ andi. r10,r15,0x8 /* The cool thing now is that r10 contains 0 for user and 8 for kernel, * and we happen to have the swapper_pg_dir at offset 8 from the user * pgdir in the PACA :-). */ add r11,r10,r13 /* If kernel, we need to clear MAS1 TID */ beq 1f /* XXX replace the RMW cycles with immediate loads + writes */ mfspr r10,SPRN_MAS1 rlwinm r10,r10,0,16,1 /* Clear TID */ mtspr SPRN_MAS1,r10 1: BEGIN_MMU_FTR_SECTION /* Search if we already have a TLB entry for that virtual address, and * if we do, bail out. */ PPC_TLBSRX_DOT(0,R16) beq virt_page_table_tlb_miss_done END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV) /* Now, we need to walk the page tables. First check if we are in * range. */ rldicl. r10,r16,64-(VPTE_INDEX_SIZE+3),VPTE_INDEX_SIZE+3+4 bne- virt_page_table_tlb_miss_fault /* Get the PGD pointer */ ld r15,PACAPGD(r11) cmpldi cr0,r15,0 beq- virt_page_table_tlb_miss_fault /* Get to PGD entry */ rldicl r11,r16,64-VPTE_PGD_SHIFT,64-PGD_INDEX_SIZE-3 clrrdi r10,r11,3 ldx r15,r10,r15 cmpdi cr0,r15,0 bge virt_page_table_tlb_miss_fault #ifndef CONFIG_PPC_64K_PAGES /* Get to PUD entry */ rldicl r11,r16,64-VPTE_PUD_SHIFT,64-PUD_INDEX_SIZE-3 clrrdi r10,r11,3 ldx r15,r10,r15 cmpdi cr0,r15,0 bge virt_page_table_tlb_miss_fault #endif /* CONFIG_PPC_64K_PAGES */ /* Get to PMD entry */ rldicl r11,r16,64-VPTE_PMD_SHIFT,64-PMD_INDEX_SIZE-3 clrrdi r10,r11,3 ldx r15,r10,r15 cmpdi cr0,r15,0 bge virt_page_table_tlb_miss_fault /* Ok, we're all right, we can now create a kernel translation for * a 4K or 64K page from r16 -> r15. */ /* Now we build the MAS: * * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG * MAS 1 : Almost fully setup * - PID already updated by caller if necessary * - TSIZE for now is base page size always * MAS 2 : Use defaults * MAS 3+7 : Needs to be done * * So we only do MAS 2 and 3 for now... */ clrldi r11,r15,4 /* remove region ID from RPN */ ori r10,r11,1 /* Or-in SR */ BEGIN_MMU_FTR_SECTION srdi r16,r10,32 mtspr SPRN_MAS3,r10 mtspr SPRN_MAS7,r16 MMU_FTR_SECTION_ELSE mtspr SPRN_MAS7_MAS3,r10 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS) tlbwe BEGIN_MMU_FTR_SECTION virt_page_table_tlb_miss_done: /* We have overriden MAS2:EPN but currently our primary TLB miss * handler will always restore it so that should not be an issue, * if we ever optimize the primary handler to not write MAS2 on * some cases, we'll have to restore MAS2:EPN here based on the * original fault's DEAR. If we do that we have to modify the * ITLB miss handler to also store SRR0 in the exception frame * as DEAR. * * However, one nasty thing we did is we cleared the reservation * (well, potentially we did). We do a trick here thus if we * are not a level 0 exception (we interrupted the TLB miss) we * offset the return address by -4 in order to replay the tlbsrx * instruction there */ subf r10,r13,r12 cmpldi cr0,r10,PACA_EXTLB+EX_TLB_SIZE bne- 1f ld r11,PACA_EXTLB+EX_TLB_SIZE+EX_TLB_SRR0(r13) addi r10,r11,-4 std r10,PACA_EXTLB+EX_TLB_SIZE+EX_TLB_SRR0(r13) 1: END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV) /* Return to caller, normal case */ TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_OK); TLB_MISS_EPILOG_SUCCESS rfi virt_page_table_tlb_miss_fault: /* If we fault here, things are a little bit tricky. We need to call * either data or instruction store fault, and we need to retrieve * the original fault address and ESR (for data). * * The thing is, we know that in normal circumstances, this is * always called as a second level tlb miss for SW load or as a first * level TLB miss for HW load, so we should be able to peek at the * relevant information in the first exception frame in the PACA. * * However, we do need to double check that, because we may just hit * a stray kernel pointer or a userland attack trying to hit those * areas. If that is the case, we do a data fault. (We can't get here * from an instruction tlb miss anyway). * * Note also that when going to a fault, we must unwind the previous * level as well. Since we are doing that, we don't need to clear or * restore the TLB reservation neither. */ subf r10,r13,r12 cmpldi cr0,r10,PACA_EXTLB+EX_TLB_SIZE bne- virt_page_table_tlb_miss_whacko_fault /* We dig the original DEAR and ESR from slot 0 */ ld r15,EX_TLB_DEAR+PACA_EXTLB(r13) ld r16,EX_TLB_ESR+PACA_EXTLB(r13) /* We check for the "special" ESR value for instruction faults */ cmpdi cr0,r16,-1 beq 1f mtspr SPRN_DEAR,r15 mtspr SPRN_ESR,r16 TLB_MISS_STATS_D(MMSTAT_TLB_MISS_PT_FAULT); TLB_MISS_EPILOG_ERROR b exc_data_storage_book3e 1: TLB_MISS_STATS_I(MMSTAT_TLB_MISS_PT_FAULT); TLB_MISS_EPILOG_ERROR b exc_instruction_storage_book3e virt_page_table_tlb_miss_whacko_fault: /* The linear fault will restart everything so ESR and DEAR will * not have been clobbered, let's just fault with what we have */ TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_FAULT); TLB_MISS_EPILOG_ERROR b exc_data_storage_book3e /************************************************************** * * * TLB miss handling for Book3E with hw page table support * * * **************************************************************/ /* Data TLB miss */ START_EXCEPTION(data_tlb_miss_htw) TLB_MISS_PROLOG /* Now we handle the fault proper. We only save DEAR in normal * fault case since that's the only interesting values here. * We could probably also optimize by not saving SRR0/1 in the * linear mapping case but I'll leave that for later */ mfspr r14,SPRN_ESR mfspr r16,SPRN_DEAR /* get faulting address */ srdi r11,r16,60 /* get region */ cmpldi cr0,r11,0xc /* linear mapping ? */ TLB_MISS_STATS_SAVE_INFO beq tlb_load_linear /* yes -> go to linear map load */ /* We do the user/kernel test for the PID here along with the RW test */ cmpldi cr0,r11,0 /* Check for user region */ ld r15,PACAPGD(r13) /* Load user pgdir */ beq htw_tlb_miss /* XXX replace the RMW cycles with immediate loads + writes */ 1: mfspr r10,SPRN_MAS1 cmpldi cr0,r11,8 /* Check for vmalloc region */ rlwinm r10,r10,0,16,1 /* Clear TID */ mtspr SPRN_MAS1,r10 ld r15,PACA_KERNELPGD(r13) /* Load kernel pgdir */ beq+ htw_tlb_miss /* We got a crappy address, just fault with whatever DEAR and ESR * are here */ TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT) TLB_MISS_EPILOG_ERROR b exc_data_storage_book3e /* Instruction TLB miss */ START_EXCEPTION(instruction_tlb_miss_htw) TLB_MISS_PROLOG /* If we take a recursive fault, the second level handler may need * to know whether we are handling a data or instruction fault in * order to get to the right store fault handler. We provide that * info by keeping a crazy value for ESR in r14 */ li r14,-1 /* store to exception frame is done later */ /* Now we handle the fault proper. We only save DEAR in the non * linear mapping case since we know the linear mapping case will * not re-enter. We could indeed optimize and also not save SRR0/1 * in the linear mapping case but I'll leave that for later * * Faulting address is SRR0 which is already in r16 */ srdi r11,r16,60 /* get region */ cmpldi cr0,r11,0xc /* linear mapping ? */ TLB_MISS_STATS_SAVE_INFO beq tlb_load_linear /* yes -> go to linear map load */ /* We do the user/kernel test for the PID here along with the RW test */ cmpldi cr0,r11,0 /* Check for user region */ ld r15,PACAPGD(r13) /* Load user pgdir */ beq htw_tlb_miss /* XXX replace the RMW cycles with immediate loads + writes */ 1: mfspr r10,SPRN_MAS1 cmpldi cr0,r11,8 /* Check for vmalloc region */ rlwinm r10,r10,0,16,1 /* Clear TID */ mtspr SPRN_MAS1,r10 ld r15,PACA_KERNELPGD(r13) /* Load kernel pgdir */ beq+ htw_tlb_miss /* We got a crappy address, just fault */ TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT) TLB_MISS_EPILOG_ERROR b exc_instruction_storage_book3e /* * This is the guts of the second-level TLB miss handler for direct * misses. We are entered with: * * r16 = virtual page table faulting address * r15 = PGD pointer * r14 = ESR * r13 = PACA * r12 = TLB exception frame in PACA * r11 = crap (free to use) * r10 = crap (free to use) * * It can be re-entered by the linear mapping miss handler. However, to * avoid too much complication, it will save/restore things for us */ htw_tlb_miss: /* Search if we already have a TLB entry for that virtual address, and * if we do, bail out. * * MAS1:IND should be already set based on MAS4 */ PPC_TLBSRX_DOT(0,R16) beq htw_tlb_miss_done /* Now, we need to walk the page tables. First check if we are in * range. */ rldicl. r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4 bne- htw_tlb_miss_fault /* Get the PGD pointer */ cmpldi cr0,r15,0 beq- htw_tlb_miss_fault /* Get to PGD entry */ rldicl r11,r16,64-(PGDIR_SHIFT-3),64-PGD_INDEX_SIZE-3 clrrdi r10,r11,3 ldx r15,r10,r15 cmpdi cr0,r15,0 bge htw_tlb_miss_fault #ifndef CONFIG_PPC_64K_PAGES /* Get to PUD entry */ rldicl r11,r16,64-(PUD_SHIFT-3),64-PUD_INDEX_SIZE-3 clrrdi r10,r11,3 ldx r15,r10,r15 cmpdi cr0,r15,0 bge htw_tlb_miss_fault #endif /* CONFIG_PPC_64K_PAGES */ /* Get to PMD entry */ rldicl r11,r16,64-(PMD_SHIFT-3),64-PMD_INDEX_SIZE-3 clrrdi r10,r11,3 ldx r15,r10,r15 cmpdi cr0,r15,0 bge htw_tlb_miss_fault /* Ok, we're all right, we can now create an indirect entry for * a 1M or 256M page. * * The last trick is now that because we use "half" pages for * the HTW (1M IND is 2K and 256M IND is 32K) we need to account * for an added LSB bit to the RPN. For 64K pages, there is no * problem as we already use 32K arrays (half PTE pages), but for * 4K page we need to extract a bit from the virtual address and * insert it into the "PA52" bit of the RPN. */ #ifndef CONFIG_PPC_64K_PAGES rlwimi r15,r16,32-9,20,20 #endif /* Now we build the MAS: * * MAS 0 : Fully setup with defaults in MAS4 and TLBnCFG * MAS 1 : Almost fully setup * - PID already updated by caller if necessary * - TSIZE for now is base ind page size always * MAS 2 : Use defaults * MAS 3+7 : Needs to be done */ #ifdef CONFIG_PPC_64K_PAGES ori r10,r15,(BOOK3E_PAGESZ_64K << MAS3_SPSIZE_SHIFT) #else ori r10,r15,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT) #endif BEGIN_MMU_FTR_SECTION srdi r16,r10,32 mtspr SPRN_MAS3,r10 mtspr SPRN_MAS7,r16 MMU_FTR_SECTION_ELSE mtspr SPRN_MAS7_MAS3,r10 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS) tlbwe htw_tlb_miss_done: /* We don't bother with restoring DEAR or ESR since we know we are * level 0 and just going back to userland. They are only needed * if you are going to take an access fault */ TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_OK) TLB_MISS_EPILOG_SUCCESS rfi htw_tlb_miss_fault: /* We need to check if it was an instruction miss. We know this * though because r14 would contain -1 */ cmpdi cr0,r14,-1 beq 1f mtspr SPRN_DEAR,r16 mtspr SPRN_ESR,r14 TLB_MISS_STATS_D(MMSTAT_TLB_MISS_PT_FAULT) TLB_MISS_EPILOG_ERROR b exc_data_storage_book3e 1: TLB_MISS_STATS_I(MMSTAT_TLB_MISS_PT_FAULT) TLB_MISS_EPILOG_ERROR b exc_instruction_storage_book3e /* * This is the guts of "any" level TLB miss handler for kernel linear * mapping misses. We are entered with: * * * r16 = faulting address * r15 = crap (free to use) * r14 = ESR (data) or -1 (instruction) * r13 = PACA * r12 = TLB exception frame in PACA * r11 = crap (free to use) * r10 = crap (free to use) * * In addition we know that we will not re-enter, so in theory, we could * use a simpler epilog not restoring SRR0/1 etc.. but we'll do that later. * * We also need to be careful about MAS registers here & TLB reservation, * as we know we'll have clobbered them if we interrupt the main TLB miss * handlers in which case we probably want to do a full restart at level * 0 rather than saving / restoring the MAS. * * Note: If we care about performance of that core, we can easily shuffle * a few things around */ tlb_load_linear: /* For now, we assume the linear mapping is contiguous and stops at * linear_map_top. We also assume the size is a multiple of 1G, thus * we only use 1G pages for now. That might have to be changed in a * final implementation, especially when dealing with hypervisors */ ld r11,PACATOC(r13) ld r11,linear_map_top@got(r11) ld r10,0(r11) tovirt(10,10) cmpld cr0,r16,r10 bge tlb_load_linear_fault /* MAS1 need whole new setup. */ li r15,(BOOK3E_PAGESZ_1GB<<MAS1_TSIZE_SHIFT) oris r15,r15,MAS1_VALID@h /* MAS1 needs V and TSIZE */ mtspr SPRN_MAS1,r15 /* Already somebody there ? */ PPC_TLBSRX_DOT(0,R16) beq tlb_load_linear_done /* Now we build the remaining MAS. MAS0 and 2 should be fine * with their defaults, which leaves us with MAS 3 and 7. The * mapping is linear, so we just take the address, clear the * region bits, and or in the permission bits which are currently * hard wired */ clrrdi r10,r16,30 /* 1G page index */ clrldi r10,r10,4 /* clear region bits */ ori r10,r10,MAS3_SR|MAS3_SW|MAS3_SX BEGIN_MMU_FTR_SECTION srdi r16,r10,32 mtspr SPRN_MAS3,r10 mtspr SPRN_MAS7,r16 MMU_FTR_SECTION_ELSE mtspr SPRN_MAS7_MAS3,r10 ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS) tlbwe tlb_load_linear_done: /* We use the "error" epilog for success as we do want to * restore to the initial faulting context, whatever it was. * We do that because we can't resume a fault within a TLB * miss handler, due to MAS and TLB reservation being clobbered. */ TLB_MISS_STATS_X(MMSTAT_TLB_MISS_LINEAR) TLB_MISS_EPILOG_ERROR rfi tlb_load_linear_fault: /* We keep the DEAR and ESR around, this shouldn't have happened */ cmpdi cr0,r14,-1 beq 1f TLB_MISS_EPILOG_ERROR_SPECIAL b exc_data_storage_book3e 1: TLB_MISS_EPILOG_ERROR_SPECIAL b exc_instruction_storage_book3e #ifdef CONFIG_BOOK3E_MMU_TLB_STATS .tlb_stat_inc: 1: ldarx r8,0,r9 addi r8,r8,1 stdcx. r8,0,r9 bne- 1b blr #endif