/* * Copyright 2014 Freescale Semiconductor, Inc. * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License * Version 2 or later at the following locations: * * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ #include <linux/linkage.h> #include <asm/assembler.h> #include <asm/asm-offsets.h> #include <asm/hardware/cache-l2x0.h> #include "hardware.h" /* * ==================== low level suspend ==================== * * Better to follow below rules to use ARM registers: * r0: pm_info structure address; * r1 ~ r4: for saving pm_info members; * r5 ~ r10: free registers; * r11: io base address. * * suspend ocram space layout: * ======================== high address ====================== * . * . * . * ^ * ^ * ^ * imx6_suspend code * PM_INFO structure(imx6_cpu_pm_info) * ======================== low address ======================= */ /* * Below offsets are based on struct imx6_cpu_pm_info * which defined in arch/arm/mach-imx/pm-imx6q.c, this * structure contains necessary pm info for low level * suspend related code. */ #define PM_INFO_PBASE_OFFSET 0x0 #define PM_INFO_RESUME_ADDR_OFFSET 0x4 #define PM_INFO_DDR_TYPE_OFFSET 0x8 #define PM_INFO_PM_INFO_SIZE_OFFSET 0xC #define PM_INFO_MX6Q_MMDC_P_OFFSET 0x10 #define PM_INFO_MX6Q_MMDC_V_OFFSET 0x14 #define PM_INFO_MX6Q_SRC_P_OFFSET 0x18 #define PM_INFO_MX6Q_SRC_V_OFFSET 0x1C #define PM_INFO_MX6Q_IOMUXC_P_OFFSET 0x20 #define PM_INFO_MX6Q_IOMUXC_V_OFFSET 0x24 #define PM_INFO_MX6Q_CCM_P_OFFSET 0x28 #define PM_INFO_MX6Q_CCM_V_OFFSET 0x2C #define PM_INFO_MX6Q_GPC_P_OFFSET 0x30 #define PM_INFO_MX6Q_GPC_V_OFFSET 0x34 #define PM_INFO_MX6Q_L2_P_OFFSET 0x38 #define PM_INFO_MX6Q_L2_V_OFFSET 0x3C #define PM_INFO_MMDC_IO_NUM_OFFSET 0x40 #define PM_INFO_MMDC_IO_VAL_OFFSET 0x44 #define MX6Q_SRC_GPR1 0x20 #define MX6Q_SRC_GPR2 0x24 #define MX6Q_MMDC_MAPSR 0x404 #define MX6Q_MMDC_MPDGCTRL0 0x83c #define MX6Q_GPC_IMR1 0x08 #define MX6Q_GPC_IMR2 0x0c #define MX6Q_GPC_IMR3 0x10 #define MX6Q_GPC_IMR4 0x14 #define MX6Q_CCM_CCR 0x0 .align 3 .macro sync_l2_cache /* sync L2 cache to drain L2's buffers to DRAM. */ #ifdef CONFIG_CACHE_L2X0 ldr r11, [r0, #PM_INFO_MX6Q_L2_V_OFFSET] mov r6, #0x0 str r6, [r11, #L2X0_CACHE_SYNC] 1: ldr r6, [r11, #L2X0_CACHE_SYNC] ands r6, r6, #0x1 bne 1b #endif .endm .macro resume_mmdc /* restore MMDC IO */ cmp r5, #0x0 ldreq r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] ldrne r11, [r0, #PM_INFO_MX6Q_IOMUXC_P_OFFSET] ldr r6, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET] ldr r7, =PM_INFO_MMDC_IO_VAL_OFFSET add r7, r7, r0 1: ldr r8, [r7], #0x4 ldr r9, [r7], #0x4 str r9, [r11, r8] subs r6, r6, #0x1 bne 1b cmp r5, #0x0 ldreq r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET] ldrne r11, [r0, #PM_INFO_MX6Q_MMDC_P_OFFSET] cmp r3, #IMX_DDR_TYPE_LPDDR2 bne 4f /* reset read FIFO, RST_RD_FIFO */ ldr r7, =MX6Q_MMDC_MPDGCTRL0 ldr r6, [r11, r7] orr r6, r6, #(1 << 31) str r6, [r11, r7] 2: ldr r6, [r11, r7] ands r6, r6, #(1 << 31) bne 2b /* reset FIFO a second time */ ldr r6, [r11, r7] orr r6, r6, #(1 << 31) str r6, [r11, r7] 3: ldr r6, [r11, r7] ands r6, r6, #(1 << 31) bne 3b 4: /* let DDR out of self-refresh */ ldr r7, [r11, #MX6Q_MMDC_MAPSR] bic r7, r7, #(1 << 21) str r7, [r11, #MX6Q_MMDC_MAPSR] 5: ldr r7, [r11, #MX6Q_MMDC_MAPSR] ands r7, r7, #(1 << 25) bne 5b /* enable DDR auto power saving */ ldr r7, [r11, #MX6Q_MMDC_MAPSR] bic r7, r7, #0x1 str r7, [r11, #MX6Q_MMDC_MAPSR] .endm ENTRY(imx6_suspend) ldr r1, [r0, #PM_INFO_PBASE_OFFSET] ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET] ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET] ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET] /* * counting the resume address in iram * to set it in SRC register. */ ldr r6, =imx6_suspend ldr r7, =resume sub r7, r7, r6 add r8, r1, r4 add r9, r8, r7 /* * make sure TLB contain the addr we want, * as we will access them after MMDC IO floated. */ ldr r11, [r0, #PM_INFO_MX6Q_CCM_V_OFFSET] ldr r6, [r11, #0x0] ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] ldr r6, [r11, #0x0] ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] ldr r6, [r11, #0x0] /* use r11 to store the IO address */ ldr r11, [r0, #PM_INFO_MX6Q_SRC_V_OFFSET] /* store physical resume addr and pm_info address. */ str r9, [r11, #MX6Q_SRC_GPR1] str r1, [r11, #MX6Q_SRC_GPR2] /* need to sync L2 cache before DSM. */ sync_l2_cache ldr r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET] /* * put DDR explicitly into self-refresh and * disable automatic power savings. */ ldr r7, [r11, #MX6Q_MMDC_MAPSR] orr r7, r7, #0x1 str r7, [r11, #MX6Q_MMDC_MAPSR] /* make the DDR explicitly enter self-refresh. */ ldr r7, [r11, #MX6Q_MMDC_MAPSR] orr r7, r7, #(1 << 21) str r7, [r11, #MX6Q_MMDC_MAPSR] poll_dvfs_set: ldr r7, [r11, #MX6Q_MMDC_MAPSR] ands r7, r7, #(1 << 25) beq poll_dvfs_set ldr r11, [r0, #PM_INFO_MX6Q_IOMUXC_V_OFFSET] ldr r6, =0x0 ldr r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET] ldr r8, =PM_INFO_MMDC_IO_VAL_OFFSET add r8, r8, r0 /* LPDDR2's last 3 IOs need special setting */ cmp r3, #IMX_DDR_TYPE_LPDDR2 subeq r7, r7, #0x3 set_mmdc_io_lpm: ldr r9, [r8], #0x8 str r6, [r11, r9] subs r7, r7, #0x1 bne set_mmdc_io_lpm cmp r3, #IMX_DDR_TYPE_LPDDR2 bne set_mmdc_io_lpm_done ldr r6, =0x1000 ldr r9, [r8], #0x8 str r6, [r11, r9] ldr r9, [r8], #0x8 str r6, [r11, r9] ldr r6, =0x80000 ldr r9, [r8] str r6, [r11, r9] set_mmdc_io_lpm_done: /* * mask all GPC interrupts before * enabling the RBC counters to * avoid the counter starting too * early if an interupt is already * pending. */ ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] ldr r6, [r11, #MX6Q_GPC_IMR1] ldr r7, [r11, #MX6Q_GPC_IMR2] ldr r8, [r11, #MX6Q_GPC_IMR3] ldr r9, [r11, #MX6Q_GPC_IMR4] ldr r10, =0xffffffff str r10, [r11, #MX6Q_GPC_IMR1] str r10, [r11, #MX6Q_GPC_IMR2] str r10, [r11, #MX6Q_GPC_IMR3] str r10, [r11, #MX6Q_GPC_IMR4] /* * enable the RBC bypass counter here * to hold off the interrupts. RBC counter * = 32 (1ms), Minimum RBC delay should be * 400us for the analog LDOs to power down. */ ldr r11, [r0, #PM_INFO_MX6Q_CCM_V_OFFSET] ldr r10, [r11, #MX6Q_CCM_CCR] bic r10, r10, #(0x3f << 21) orr r10, r10, #(0x20 << 21) str r10, [r11, #MX6Q_CCM_CCR] /* enable the counter. */ ldr r10, [r11, #MX6Q_CCM_CCR] orr r10, r10, #(0x1 << 27) str r10, [r11, #MX6Q_CCM_CCR] /* unmask all the GPC interrupts. */ ldr r11, [r0, #PM_INFO_MX6Q_GPC_V_OFFSET] str r6, [r11, #MX6Q_GPC_IMR1] str r7, [r11, #MX6Q_GPC_IMR2] str r8, [r11, #MX6Q_GPC_IMR3] str r9, [r11, #MX6Q_GPC_IMR4] /* * now delay for a short while (3usec) * ARM is at 1GHz at this point * so a short loop should be enough. * this delay is required to ensure that * the RBC counter can start counting in * case an interrupt is already pending * or in case an interrupt arrives just * as ARM is about to assert DSM_request. */ ldr r6, =2000 rbc_loop: subs r6, r6, #0x1 bne rbc_loop /* Zzz, enter stop mode */ wfi nop nop nop nop /* * run to here means there is pending * wakeup source, system should auto * resume, we need to restore MMDC IO first */ mov r5, #0x0 resume_mmdc /* return to suspend finish */ ret lr resume: /* invalidate L1 I-cache first */ mov r6, #0x0 mcr p15, 0, r6, c7, c5, 0 mcr p15, 0, r6, c7, c5, 6 /* enable the Icache and branch prediction */ mov r6, #0x1800 mcr p15, 0, r6, c1, c0, 0 isb /* get physical resume address from pm_info. */ ldr lr, [r0, #PM_INFO_RESUME_ADDR_OFFSET] /* clear core0's entry and parameter */ ldr r11, [r0, #PM_INFO_MX6Q_SRC_P_OFFSET] mov r7, #0x0 str r7, [r11, #MX6Q_SRC_GPR1] str r7, [r11, #MX6Q_SRC_GPR2] ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET] mov r5, #0x1 resume_mmdc ret lr ENDPROC(imx6_suspend) /* * The following code must assume it is running from physical address * where absolute virtual addresses to the data section have to be * turned into relative ones. */ ENTRY(v7_cpu_resume) bl v7_invalidate_l1 #ifdef CONFIG_CACHE_L2X0 bl l2c310_early_resume #endif b cpu_resume ENDPROC(v7_cpu_resume)