/* * CNS3xxx common devices * * Copyright 2008 Cavium Networks * Scott Shu * Copyright 2010 MontaVista Software, LLC. * Anton Vorontsov <avorontsov@mvista.com> * * This file is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License, Version 2, as * published by the Free Software Foundation. */ #include <linux/io.h> #include <linux/init.h> #include <linux/compiler.h> #include <linux/dma-mapping.h> #include <linux/platform_device.h> #include "cns3xxx.h" #include "pm.h" #include "core.h" #include "devices.h" /* * AHCI */ static struct resource cns3xxx_ahci_resource[] = { [0] = { .start = CNS3XXX_SATA2_BASE, .end = CNS3XXX_SATA2_BASE + CNS3XXX_SATA2_SIZE - 1, .flags = IORESOURCE_MEM, }, [1] = { .start = IRQ_CNS3XXX_SATA, .end = IRQ_CNS3XXX_SATA, .flags = IORESOURCE_IRQ, }, }; static u64 cns3xxx_ahci_dmamask = DMA_BIT_MASK(32); static struct platform_device cns3xxx_ahci_pdev = { .name = "ahci", .id = 0, .resource = cns3xxx_ahci_resource, .num_resources = ARRAY_SIZE(cns3xxx_ahci_resource), .dev = { .dma_mask = &cns3xxx_ahci_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), }, }; void __init cns3xxx_ahci_init(void) { u32 tmp; tmp = __raw_readl(MISC_SATA_POWER_MODE); tmp |= 0x1 << 16; /* Disable SATA PHY 0 from SLUMBER Mode */ tmp |= 0x1 << 17; /* Disable SATA PHY 1 from SLUMBER Mode */ __raw_writel(tmp, MISC_SATA_POWER_MODE); /* Enable SATA PHY */ cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY0); cns3xxx_pwr_power_up(0x1 << PM_PLL_HM_PD_CTRL_REG_OFFSET_SATA_PHY1); /* Enable SATA Clock */ cns3xxx_pwr_clk_en(0x1 << PM_CLK_GATE_REG_OFFSET_SATA); /* De-Asscer SATA Reset */ cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SATA)); platform_device_register(&cns3xxx_ahci_pdev); } /* * SDHCI */ static struct resource cns3xxx_sdhci_resources[] = { [0] = { .start = CNS3XXX_SDIO_BASE, .end = CNS3XXX_SDIO_BASE + SZ_4K - 1, .flags = IORESOURCE_MEM, }, [1] = { .start = IRQ_CNS3XXX_SDIO, .end = IRQ_CNS3XXX_SDIO, .flags = IORESOURCE_IRQ, }, }; static struct platform_device cns3xxx_sdhci_pdev = { .name = "sdhci-cns3xxx", .id = 0, .num_resources = ARRAY_SIZE(cns3xxx_sdhci_resources), .resource = cns3xxx_sdhci_resources, }; void __init cns3xxx_sdhci_init(void) { u32 __iomem *gpioa = IOMEM(CNS3XXX_MISC_BASE_VIRT + 0x0014); u32 gpioa_pins = __raw_readl(gpioa); /* MMC/SD pins share with GPIOA */ gpioa_pins |= 0x1fff0004; __raw_writel(gpioa_pins, gpioa); cns3xxx_pwr_clk_en(CNS3XXX_PWR_CLK_EN(SDIO)); cns3xxx_pwr_soft_rst(CNS3XXX_PWR_SOFTWARE_RST(SDIO)); platform_device_register(&cns3xxx_sdhci_pdev); }