config SND_OMAP_SOC tristate "SoC Audio for the Texas Instruments OMAP chips" depends on ARCH_OMAP config SND_OMAP_SOC_DMIC tristate config SND_OMAP_SOC_MCBSP tristate config SND_OMAP_SOC_MCPDM tristate config SND_OMAP_SOC_HDMI tristate config SND_OMAP_SOC_N810 tristate "SoC Audio support for Nokia N810" depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C depends on OMAP_MUX select SND_OMAP_SOC_MCBSP select SND_SOC_TLV320AIC3X help Say Y if you want to add support for SoC audio on Nokia N810. config SND_OMAP_SOC_RX51 tristate "SoC Audio support for Nokia RX-51" depends on SND_OMAP_SOC && MACH_NOKIA_RX51 select SND_OMAP_SOC_MCBSP select SND_SOC_TLV320AIC3X select SND_SOC_TPA6130A2 help Say Y if you want to add support for SoC audio on Nokia RX-51 hardware. This is also known as Nokia N900 product. config SND_OMAP_SOC_AMS_DELTA tristate "SoC Audio support for Amstrad E3 (Delta) videophone" depends on SND_OMAP_SOC && MACH_AMS_DELTA select SND_OMAP_SOC_MCBSP select SND_SOC_CX20442 help Say Y if you want to add support for SoC audio device connected to a handset and a speakerphone found on Amstrad E3 (Delta) videophone. Note that in order to get those devices fully supported, you have to build the kernel with standard serial port driver included and configured for at least 4 ports. Then, from userspace, you must load a line discipline #19 on the modem (ttyS3) serial line. The simplest way to achieve this is to install util-linux-ng and use the included ldattach utility. This can be started automatically from udev, a simple rule like this one should do the trick (it does for me): ACTION=="add", KERNEL=="controlC0", \ RUN+="/usr/sbin/ldattach 19 /dev/ttyS3" config SND_OMAP_SOC_OSK5912 tristate "SoC Audio support for omap osk5912" depends on SND_OMAP_SOC && MACH_OMAP_OSK && I2C select SND_OMAP_SOC_MCBSP select SND_SOC_TLV320AIC23 help Say Y if you want to add support for SoC audio on osk5912. config SND_OMAP_SOC_OVERO tristate "SoC Audio support for Gumstix Overo and CompuLab CM-T35" depends on TWL4030_CORE && SND_OMAP_SOC && (MACH_OVERO || MACH_CM_T35) select SND_OMAP_SOC_MCBSP select SND_SOC_TWL4030 help Say Y if you want to add support for SoC audio on the Gumstix Overo or CompuLab CM-T35 config SND_OMAP_SOC_OMAP3EVM tristate "SoC Audio support for OMAP3EVM board" depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3EVM select SND_OMAP_SOC_MCBSP select SND_SOC_TWL4030 help Say Y if you want to add support for SoC audio on the omap3evm board. config SND_OMAP_SOC_AM3517EVM tristate "SoC Audio support for OMAP3517 / AM3517 EVM" depends on SND_OMAP_SOC && MACH_OMAP3517EVM && I2C select SND_OMAP_SOC_MCBSP select SND_SOC_TLV320AIC23 help Say Y if you want to add support for SoC audio on the OMAP3517 / AM3517 EVM. config SND_OMAP_SOC_SDP3430 tristate "SoC Audio support for Texas Instruments SDP3430" depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_3430SDP select SND_OMAP_SOC_MCBSP select SND_SOC_TWL4030 help Say Y if you want to add support for SoC audio on Texas Instruments SDP3430. config SND_OMAP_SOC_OMAP_ABE_TWL6040 tristate "SoC Audio support for OMAP boards using ABE and twl6040 codec" depends on TWL6040_CORE && SND_OMAP_SOC && ARCH_OMAP4 select SND_OMAP_SOC_DMIC select SND_OMAP_SOC_MCPDM select SND_SOC_TWL6040 select SND_SOC_DMIC help Say Y if you want to add support for SoC audio on OMAP boards using ABE and twl6040 codec. This driver currently supports: - SDP4430/Blaze boards - PandaBoard (4430) - PandaBoardES (4460) config SND_OMAP_SOC_OMAP4_HDMI tristate "SoC Audio support for Texas Instruments OMAP4 HDMI" depends on SND_OMAP_SOC && OMAP4_DSS_HDMI && OMAP2_DSS && ARCH_OMAP4 select SND_OMAP_SOC_HDMI help Say Y if you want to add support for SoC HDMI audio on Texas Instruments OMAP4 chips config SND_OMAP_SOC_OMAP3_PANDORA tristate "SoC Audio support for OMAP3 Pandora" depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP3_PANDORA select SND_OMAP_SOC_MCBSP select SND_SOC_TWL4030 help Say Y if you want to add support for SoC audio on the OMAP3 Pandora. config SND_OMAP_SOC_OMAP3_BEAGLE tristate "SoC Audio support for OMAP3 Beagle and Devkit8000" depends on TWL4030_CORE && SND_OMAP_SOC depends on (MACH_OMAP3_BEAGLE || MACH_DEVKIT8000) select SND_OMAP_SOC_MCBSP select SND_SOC_TWL4030 help Say Y if you want to add support for SoC audio on the Beagleboard or the clone Devkit8000. config SND_OMAP_SOC_ZOOM2 tristate "SoC Audio support for Zoom2" depends on TWL4030_CORE && SND_OMAP_SOC && MACH_OMAP_ZOOM2 select SND_OMAP_SOC_MCBSP select SND_SOC_TWL4030 help Say Y if you want to add support for Soc audio on Zoom2 board. config SND_OMAP_SOC_IGEP0020 tristate "SoC Audio support for IGEP v2" depends on TWL4030_CORE && SND_OMAP_SOC && MACH_IGEP0020 select SND_OMAP_SOC_MCBSP select SND_SOC_TWL4030 help Say Y if you want to add support for Soc audio on IGEP v2 board.