- 根目录:
- arch
- x86
- platform
- visws
- visws_quirks.c
/*
* SGI Visual Workstation support and quirks, unmaintained.
*
* Split out from setup.c by davej@suse.de
*
* Copyright (C) 1999 Bent Hagemark, Ingo Molnar
*
* SGI Visual Workstation interrupt controller
*
* The Cobalt system ASIC in the Visual Workstation contains a "Cobalt" APIC
* which serves as the main interrupt controller in the system. Non-legacy
* hardware in the system uses this controller directly. Legacy devices
* are connected to the PIIX4 which in turn has its 8259(s) connected to
* a of the Cobalt APIC entry.
*
* 09/02/2000 - Updated for 2.4 by jbarnes@sgi.com
*
* 25/11/2002 - Updated for 2.5 by Andrey Panin <pazke@orbita1.ru>
*/
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/smp.h>
#include <asm/visws/cobalt.h>
#include <asm/visws/piix4.h>
#include <asm/io_apic.h>
#include <asm/fixmap.h>
#include <asm/reboot.h>
#include <asm/setup.h>
#include <asm/apic.h>
#include <asm/e820.h>
#include <asm/time.h>
#include <asm/io.h>
#include <linux/kernel_stat.h>
#include <asm/i8259.h>
#include <asm/irq_vectors.h>
#include <asm/visws/lithium.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
extern int no_broadcast;
char visws_board_type = -1;
char visws_board_rev = -1;
static void __init visws_time_init(void)
{
printk(KERN_INFO "Starting Cobalt Timer system clock\n");
/* Set the countdown value */
co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ);
/* Start the timer */
co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN);
/* Enable (unmask) the timer interrupt */
co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK);
setup_default_timer_irq();
}
/* Replaces the default init_ISA_irqs in the generic setup */
static void __init visws_pre_intr_init(void);
/* Quirk for machine specific memory setup. */
#define MB (1024 * 1024)
unsigned long sgivwfb_mem_phys;
unsigned long sgivwfb_mem_size;
EXPORT_SYMBOL(sgivwfb_mem_phys);
EXPORT_SYMBOL(sgivwfb_mem_size);
long long mem_size __initdata = 0;
static char * __init visws_memory_setup(void)
{
long long gfx_mem_size = 8 * MB;
mem_size = boot_params.alt_mem_k;
if (!mem_size) {
printk(KERN_WARNING "Bootloader didn't set memory size, upgrade it !\n");
mem_size = 128 * MB;
}
/*
* this hardcodes the graphics memory to 8 MB
* it really should be sized dynamically (or at least
* set as a boot param)
*/
if (!sgivwfb_mem_size) {
printk(KERN_WARNING "Defaulting to 8 MB framebuffer size\n");
sgivwfb_mem_size = 8 * MB;
}
/*
* Trim to nearest MB
*/
sgivwfb_mem_size &= ~((1 << 20) - 1);
sgivwfb_mem_phys = mem_size - gfx_mem_size;
e820_add_region(0, LOWMEMSIZE(), E820_RAM);
e820_add_region(HIGH_MEMORY, mem_size - sgivwfb_mem_size - HIGH_MEMORY, E820_RAM);
e820_add_region(sgivwfb_mem_phys, sgivwfb_mem_size, E820_RESERVED);
return "PROM";
}
static void visws_machine_emergency_restart(void)
{
/*
* Visual Workstations restart after this
* register is poked on the PIIX4
*/
outb(PIIX4_RESET_VAL, PIIX4_RESET_PORT);
}
static void visws_machine_power_off(void)
{
unsigned short pm_status;
/* extern unsigned int pci_bus0; */
while ((pm_status = inw(PMSTS_PORT)) & 0x100)
outw(pm_status, PMSTS_PORT);
outw(PM_SUSPEND_ENABLE, PMCNTRL_PORT);
mdelay(10);
#define PCI_CONF1_ADDRESS(bus, devfn, reg) \
(0x80000000 | (bus << 16) | (devfn << 8) | (reg & ~3))
/* outl(PCI_CONF1_ADDRESS(pci_bus0, SPECIAL_DEV, SPECIAL_REG), 0xCF8); */
outl(PIIX_SPECIAL_STOP, 0xCFC);
}
static void __init visws_get_smp_config(unsigned int early)
{
}
/*
* The Visual Workstation is Intel MP compliant in the hardware
* sense, but it doesn't have a BIOS(-configuration table).
* No problem for Linux.
*/
static void __init MP_processor_info(struct mpc_cpu *m)
{
int ver, logical_apicid;
physid_mask_t apic_cpus;
if (!(m->cpuflag & CPU_ENABLED))
return;
logical_apicid = m->apicid;
printk(KERN_INFO "%sCPU #%d %u:%u APIC version %d\n",
m->cpuflag & CPU_BOOTPROCESSOR ? "Bootup " : "",
m->apicid, (m->cpufeature & CPU_FAMILY_MASK) >> 8,
(m->cpufeature & CPU_MODEL_MASK) >> 4, m->apicver);
if (m->cpuflag & CPU_BOOTPROCESSOR)
boot_cpu_physical_apicid = m->apicid;
ver = m->apicver;
if ((ver >= 0x14 && m->apicid >= 0xff) || m->apicid >= 0xf) {
printk(KERN_ERR "Processor #%d INVALID. (Max ID: %d).\n",
m->apicid, MAX_LOCAL_APIC);
return;
}
apic->apicid_to_cpu_present(m->apicid, &apic_cpus);
physids_or(phys_cpu_present_map, phys_cpu_present_map, apic_cpus);
/*
* Validate version
*/
if (ver == 0x0) {
printk(KERN_ERR "BIOS bug, APIC version is 0 for CPU#%d! "
"fixing up to 0x10. (tell your hw vendor)\n",
m->apicid);
ver = 0x10;
}
apic_version[m->apicid] = ver;
}
static void __init visws_find_smp_config(void)
{
struct mpc_cpu *mp = phys_to_virt(CO_CPU_TAB_PHYS);
unsigned short ncpus = readw(phys_to_virt(CO_CPU_NUM_PHYS));
if (ncpus > CO_CPU_MAX) {
printk(KERN_WARNING "find_visws_smp: got cpu count of %d at %p\n",
ncpus, mp);
ncpus = CO_CPU_MAX;
}
if (ncpus > setup_max_cpus)
ncpus = setup_max_cpus;
#ifdef CONFIG_X86_LOCAL_APIC
smp_found_config = 1;
#endif
while (ncpus--)
MP_processor_info(mp++);
mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
}
static void visws_trap_init(void);
void __init visws_early_detect(void)
{
int raw;
visws_board_type = (char)(inb_p(PIIX_GPI_BD_REG) & PIIX_GPI_BD_REG)
>> PIIX_GPI_BD_SHIFT;
if (visws_board_type < 0)
return;
/*
* Override the default platform setup functions
*/
x86_init.resources.memory_setup = visws_memory_setup;
x86_init.mpparse.get_smp_config = visws_get_smp_config;
x86_init.mpparse.find_smp_config = visws_find_smp_config;
x86_init.irqs.pre_vector_init = visws_pre_intr_init;
x86_init.irqs.trap_init = visws_trap_init;
x86_init.timers.timer_init = visws_time_init;
x86_init.pci.init = pci_visws_init;
x86_init.pci.init_irq = x86_init_noop;
/*
* Install reboot quirks:
*/
pm_power_off = visws_machine_power_off;
machine_ops.emergency_restart = visws_machine_emergency_restart;
/*
* Do not use broadcast IPIs:
*/
no_broadcast = 0;
#ifdef CONFIG_X86_IO_APIC
/*
* Turn off IO-APIC detection and initialization:
*/
skip_ioapic_setup = 1;
#endif
/*
* Get Board rev.
* First, we have to initialize the 307 part to allow us access
* to the GPIO registers. Let's map them at 0x0fc0 which is right
* after the PIIX4 PM section.
*/
outb_p(SIO_DEV_SEL, SIO_INDEX);
outb_p(SIO_GP_DEV, SIO_DATA); /* Talk to GPIO regs. */
outb_p(SIO_DEV_MSB, SIO_INDEX);
outb_p(SIO_GP_MSB, SIO_DATA); /* MSB of GPIO base address */
outb_p(SIO_DEV_LSB, SIO_INDEX);
outb_p(SIO_GP_LSB, SIO_DATA); /* LSB of GPIO base address */
outb_p(SIO_DEV_ENB, SIO_INDEX);
outb_p(1, SIO_DATA); /* Enable GPIO registers. */
/*
* Now, we have to map the power management section to write
* a bit which enables access to the GPIO registers.
* What lunatic came up with this shit?
*/
outb_p(SIO_DEV_SEL, SIO_INDEX);
outb_p(SIO_PM_DEV, SIO_DATA); /* Talk to GPIO regs. */
outb_p(SIO_DEV_MSB, SIO_INDEX);
outb_p(SIO_PM_MSB, SIO_DATA); /* MSB of PM base address */
outb_p(SIO_DEV_LSB, SIO_INDEX);
outb_p(SIO_PM_LSB, SIO_DATA); /* LSB of PM base address */
outb_p(SIO_DEV_ENB, SIO_INDEX);
outb_p(1, SIO_DATA); /* Enable PM registers. */
/*
* Now, write the PM register which enables the GPIO registers.
*/
outb_p(SIO_PM_FER2, SIO_PM_INDEX);
outb_p(SIO_PM_GP_EN, SIO_PM_DATA);
/*
* Now, initialize the GPIO registers.
* We want them all to be inputs which is the
* power on default, so let's leave them alone.
* So, let's just read the board rev!
*/
raw = inb_p(SIO_GP_DATA1);
raw &= 0x7f; /* 7 bits of valid board revision ID. */
if (visws_board_type == VISWS_320) {
if (raw < 0x6) {
visws_board_rev = 4;
} else if (raw < 0xc) {
visws_board_rev = 5;
} else {
visws_board_rev = 6;
}
} else if (visws_board_type == VISWS_540) {
visws_board_rev = 2;
} else {
visws_board_rev = raw;
}
printk(KERN_INFO "Silicon Graphics Visual Workstation %s (rev %d) detected\n",
(visws_board_type == VISWS_320 ? "320" :
(visws_board_type == VISWS_540 ? "540" :
"unknown")), visws_board_rev);
}
#define A01234 (LI_INTA_0 | LI_INTA_1 | LI_INTA_2 | LI_INTA_3 | LI_INTA_4)
#define BCD (LI_INTB | LI_INTC | LI_INTD)
#define ALLDEVS (A01234 | BCD)
static __init void lithium_init(void)
{
set_fixmap(FIX_LI_PCIA, LI_PCI_A_PHYS);
set_fixmap(FIX_LI_PCIB, LI_PCI_B_PHYS);
if ((li_pcia_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
(li_pcia_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'A');
/* panic("This machine is not SGI Visual Workstation 320/540"); */
}
if ((li_pcib_read16(PCI_VENDOR_ID) != PCI_VENDOR_ID_SGI) ||
(li_pcib_read16(PCI_DEVICE_ID) != PCI_DEVICE_ID_SGI_LITHIUM)) {
printk(KERN_EMERG "Lithium hostbridge %c not found\n", 'B');
/* panic("This machine is not SGI Visual Workstation 320/540"); */
}
li_pcia_write16(LI_PCI_INTEN, ALLDEVS);
li_pcib_write16(LI_PCI_INTEN, ALLDEVS);
}
static __init void cobalt_init(void)
{
/*
* On normal SMP PC this is used only with SMP, but we have to
* use it and set it up here to start the Cobalt clock
*/
set_fixmap(FIX_APIC_BASE, APIC_DEFAULT_PHYS_BASE);
setup_local_APIC();
printk(KERN_INFO "Local APIC Version %#x, ID %#x\n",
(unsigned int)apic_read(APIC_LVR),
(unsigned int)apic_read(APIC_ID));
set_fixmap(FIX_CO_CPU, CO_CPU_PHYS);
set_fixmap(FIX_CO_APIC, CO_APIC_PHYS);
printk(KERN_INFO "Cobalt Revision %#lx, APIC ID %#lx\n",
co_cpu_read(CO_CPU_REV), co_apic_read(CO_APIC_ID));
/* Enable Cobalt APIC being careful to NOT change the ID! */
co_apic_write(CO_APIC_ID, co_apic_read(CO_APIC_ID) | CO_APIC_ENABLE);
printk(KERN_INFO "Cobalt APIC enabled: ID reg %#lx\n",
co_apic_read(CO_APIC_ID));
}
static void __init visws_trap_init(void)
{
lithium_init();
cobalt_init();
}
/*
* IRQ controller / APIC support:
*/
static DEFINE_SPINLOCK(cobalt_lock);
/*
* Set the given Cobalt APIC Redirection Table entry to point
* to the given IDT vector/index.
*/
static inline void co_apic_set(int entry, int irq)
{
co_apic_write(CO_APIC_LO(entry), CO_APIC_LEVEL | (irq + FIRST_EXTERNAL_VECTOR));
co_apic_write(CO_APIC_HI(entry), 0);
}
/*
* Cobalt (IO)-APIC functions to handle PCI devices.
*/
static inline int co_apic_ide0_hack(void)
{
extern char visws_board_type;
extern char visws_board_rev;
if (visws_board_type == VISWS_320 && visws_board_rev == 5)
return 5;
return CO_APIC_IDE0;
}
static int is_co_apic(unsigned int irq)
{
if (IS_CO_APIC(irq))
return CO_APIC(irq);
switch (irq) {
case 0: return CO_APIC_CPU;
case CO_IRQ_IDE0: return co_apic_ide0_hack();
case CO_IRQ_IDE1: return CO_APIC_IDE1;
default: return -1;
}
}
/*
* This is the SGI Cobalt (IO-)APIC:
*/
static void enable_cobalt_irq(struct irq_data *data)
{
co_apic_set(is_co_apic(data->irq), data->irq);
}
static void disable_cobalt_irq(struct irq_data *data)
{
int entry = is_co_apic(data->irq);
co_apic_write(CO_APIC_LO(entry), CO_APIC_MASK);
co_apic_read(CO_APIC_LO(entry));
}
static void ack_cobalt_irq(struct irq_data *data)
{
unsigned long flags;
spin_lock_irqsave(&cobalt_lock, flags);
disable_cobalt_irq(data);
apic_write(APIC_EOI, APIC_EIO_ACK);
spin_unlock_irqrestore(&cobalt_lock, flags);
}
static struct irq_chip cobalt_irq_type = {
.name = "Cobalt-APIC",
.irq_enable = enable_cobalt_irq,
.irq_disable = disable_cobalt_irq,
.irq_ack = ack_cobalt_irq,
};
/*
* This is the PIIX4-based 8259 that is wired up indirectly to Cobalt
* -- not the manner expected by the code in i8259.c.
*
* there is a 'master' physical interrupt source that gets sent to
* the CPU. But in the chipset there are various 'virtual' interrupts
* waiting to be handled. We represent this to Linux through a 'master'
* interrupt controller type, and through a special virtual interrupt-
* controller. Device drivers only see the virtual interrupt sources.
*/
static unsigned int startup_piix4_master_irq(struct irq_data *data)
{
legacy_pic->init(0);
enable_cobalt_irq(data);
return 0;
}
static struct irq_chip piix4_master_irq_type = {
.name = "PIIX4-master",
.irq_startup = startup_piix4_master_irq,
.irq_ack = ack_cobalt_irq,
};
static void pii4_mask(struct irq_data *data) { }
static struct irq_chip piix4_virtual_irq_type = {
.name = "PIIX4-virtual",
.irq_mask = pii4_mask,
};
/*
* PIIX4-8259 master/virtual functions to handle interrupt requests
* from legacy devices: floppy, parallel, serial, rtc.
*
* None of these get Cobalt APIC entries, neither do they have IDT
* entries. These interrupts are purely virtual and distributed from
* the 'master' interrupt source: CO_IRQ_8259.
*
* When the 8259 interrupts its handler figures out which of these
* devices is interrupting and dispatches to its handler.
*
* CAREFUL: devices see the 'virtual' interrupt only. Thus disable/
* enable_irq gets the right irq. This 'master' irq is never directly
* manipulated by any driver.
*/
static irqreturn_t piix4_master_intr(int irq, void *dev_id)
{
unsigned long flags;
int realirq;
raw_spin_lock_irqsave(&i8259A_lock, flags);
/* Find out what's interrupting in the PIIX4 master 8259 */
outb(0x0c, 0x20); /* OCW3 Poll command */
realirq = inb(0x20);
/*
* Bit 7 == 0 means invalid/spurious
*/
if (unlikely(!(realirq & 0x80)))
goto out_unlock;
realirq &= 7;
if (unlikely(realirq == 2)) {
outb(0x0c, 0xa0);
realirq = inb(0xa0);
if (unlikely(!(realirq & 0x80)))
goto out_unlock;
realirq = (realirq & 7) + 8;
}
/* mask and ack interrupt */
cached_irq_mask |= 1 << realirq;
if (unlikely(realirq > 7)) {
inb(0xa1);
outb(cached_slave_mask, 0xa1);
outb(0x60 + (realirq & 7), 0xa0);
outb(0x60 + 2, 0x20);
} else {
inb(0x21);
outb(cached_master_mask, 0x21);
outb(0x60 + realirq, 0x20);
}
raw_spin_unlock_irqrestore(&i8259A_lock, flags);
/*
* handle this 'virtual interrupt' as a Cobalt one now.
*/
generic_handle_irq(realirq);
return IRQ_HANDLED;
out_unlock:
raw_spin_unlock_irqrestore(&i8259A_lock, flags);
return IRQ_NONE;
}
static struct irqaction master_action = {
.handler = piix4_master_intr,
.name = "PIIX4-8259",
.flags = IRQF_NO_THREAD,
};
static struct irqaction cascade_action = {
.handler = no_action,
.name = "cascade",
.flags = IRQF_NO_THREAD,
};
static inline void set_piix4_virtual_irq_type(void)
{
piix4_virtual_irq_type.irq_enable = i8259A_chip.irq_unmask;
piix4_virtual_irq_type.irq_disable = i8259A_chip.irq_mask;
piix4_virtual_irq_type.irq_unmask = i8259A_chip.irq_unmask;
}
static void __init visws_pre_intr_init(void)
{
int i;
set_piix4_virtual_irq_type();
for (i = 0; i < CO_IRQ_APIC0 + CO_APIC_LAST + 1; i++) {
struct irq_chip *chip = NULL;
if (i == 0)
chip = &cobalt_irq_type;
else if (i == CO_IRQ_IDE0)
chip = &cobalt_irq_type;
else if (i == CO_IRQ_IDE1)
chip = &cobalt_irq_type;
else if (i == CO_IRQ_8259)
chip = &piix4_master_irq_type;
else if (i < CO_IRQ_APIC0)
chip = &piix4_virtual_irq_type;
else if (IS_CO_APIC(i))
chip = &cobalt_irq_type;
if (chip)
irq_set_chip(i, chip);
}
setup_irq(CO_IRQ_8259, &master_action);
setup_irq(2, &cascade_action);
}