- 根目录:
- arch
- powerpc
- platforms
- 85xx
- mpc85xx_mds.c
/*
* Copyright (C) Freescale Semicondutor, Inc. 2006-2010. All rights reserved.
*
* Author: Andy Fleming <afleming@freescale.com>
*
* Based on 83xx/mpc8360e_pb.c by:
* Li Yang <LeoLi@freescale.com>
* Yin Olivia <Hong-hua.Yin@freescale.com>
*
* Description:
* MPC85xx MDS board specific routines.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/initrd.h>
#include <linux/fsl_devices.h>
#include <linux/of_platform.h>
#include <linux/of_device.h>
#include <linux/phy.h>
#include <linux/memblock.h>
#include <asm/system.h>
#include <linux/atomic.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/machdep.h>
#include <asm/pci-bridge.h>
#include <asm/irq.h>
#include <mm/mmu_decl.h>
#include <asm/prom.h>
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <sysdev/simple_gpio.h>
#include <asm/qe.h>
#include <asm/qe_ic.h>
#include <asm/mpic.h>
#include <asm/swiotlb.h>
#include "smp.h"
#include "mpc85xx.h"
#undef DEBUG
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
#define DBG(fmt...)
#endif
#define MV88E1111_SCR 0x10
#define MV88E1111_SCR_125CLK 0x0010
static int mpc8568_fixup_125_clock(struct phy_device *phydev)
{
int scr;
int err;
/* Workaround for the 125 CLK Toggle */
scr = phy_read(phydev, MV88E1111_SCR);
if (scr < 0)
return scr;
err = phy_write(phydev, MV88E1111_SCR, scr & ~(MV88E1111_SCR_125CLK));
if (err)
return err;
err = phy_write(phydev, MII_BMCR, BMCR_RESET);
if (err)
return err;
scr = phy_read(phydev, MV88E1111_SCR);
if (scr < 0)
return scr;
err = phy_write(phydev, MV88E1111_SCR, scr | 0x0008);
return err;
}
static int mpc8568_mds_phy_fixups(struct phy_device *phydev)
{
int temp;
int err;
/* Errata */
err = phy_write(phydev,29, 0x0006);
if (err)
return err;
temp = phy_read(phydev, 30);
if (temp < 0)
return temp;
temp = (temp & (~0x8000)) | 0x4000;
err = phy_write(phydev,30, temp);
if (err)
return err;
err = phy_write(phydev,29, 0x000a);
if (err)
return err;
temp = phy_read(phydev, 30);
if (temp < 0)
return temp;
temp = phy_read(phydev, 30);
if (temp < 0)
return temp;
temp &= ~0x0020;
err = phy_write(phydev,30,temp);
if (err)
return err;
/* Disable automatic MDI/MDIX selection */
temp = phy_read(phydev, 16);
if (temp < 0)
return temp;
temp &= ~0x0060;
err = phy_write(phydev,16,temp);
return err;
}
/* ************************************************************************
*
* Setup the architecture
*
*/
#ifdef CONFIG_QUICC_ENGINE
static void __init mpc85xx_mds_reset_ucc_phys(void)
{
struct device_node *np;
static u8 __iomem *bcsr_regs;
/* Map BCSR area */
np = of_find_node_by_name(NULL, "bcsr");
if (!np)
return;
bcsr_regs = of_iomap(np, 0);
of_node_put(np);
if (!bcsr_regs)
return;
if (machine_is(mpc8568_mds)) {
#define BCSR_UCC1_GETH_EN (0x1 << 7)
#define BCSR_UCC2_GETH_EN (0x1 << 7)
#define BCSR_UCC1_MODE_MSK (0x3 << 4)
#define BCSR_UCC2_MODE_MSK (0x3 << 0)
/* Turn off UCC1 & UCC2 */
clrbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
clrbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
/* Mode is RGMII, all bits clear */
clrbits8(&bcsr_regs[11], BCSR_UCC1_MODE_MSK |
BCSR_UCC2_MODE_MSK);
/* Turn UCC1 & UCC2 on */
setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
} else if (machine_is(mpc8569_mds)) {
#define BCSR7_UCC12_GETHnRST (0x1 << 2)
#define BCSR8_UEM_MARVELL_RST (0x1 << 1)
#define BCSR_UCC_RGMII (0x1 << 6)
#define BCSR_UCC_RTBI (0x1 << 5)
/*
* U-Boot mangles interrupt polarity for Marvell PHYs,
* so reset built-in and UEM Marvell PHYs, this puts
* the PHYs into their normal state.
*/
clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
for (np = NULL; (np = of_find_compatible_node(np,
"network",
"ucc_geth")) != NULL;) {
const unsigned int *prop;
int ucc_num;
prop = of_get_property(np, "cell-index", NULL);
if (prop == NULL)
continue;
ucc_num = *prop - 1;
prop = of_get_property(np, "phy-connection-type", NULL);
if (prop == NULL)
continue;
if (strcmp("rtbi", (const char *)prop) == 0)
clrsetbits_8(&bcsr_regs[7 + ucc_num],
BCSR_UCC_RGMII, BCSR_UCC_RTBI);
}
} else if (machine_is(p1021_mds)) {
#define BCSR11_ENET_MICRST (0x1 << 5)
/* Reset Micrel PHY */
clrbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
setbits8(&bcsr_regs[11], BCSR11_ENET_MICRST);
}
iounmap(bcsr_regs);
}
static void __init mpc85xx_mds_qe_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!np) {
np = of_find_node_by_name(NULL, "qe");
if (!np)
return;
}
if (!of_device_is_available(np)) {
of_node_put(np);
return;
}
qe_reset();
of_node_put(np);
np = of_find_node_by_name(NULL, "par_io");
if (np) {
struct device_node *ucc;
par_io_init(np);
of_node_put(np);
for_each_node_by_name(ucc, "ucc")
par_io_of_config(ucc);
}
mpc85xx_mds_reset_ucc_phys();
if (machine_is(p1021_mds)) {
#define MPC85xx_PMUXCR_OFFSET 0x60
#define MPC85xx_PMUXCR_QE0 0x00008000
#define MPC85xx_PMUXCR_QE3 0x00001000
#define MPC85xx_PMUXCR_QE9 0x00000040
#define MPC85xx_PMUXCR_QE12 0x00000008
static __be32 __iomem *pmuxcr;
np = of_find_node_by_name(NULL, "global-utilities");
if (np) {
pmuxcr = of_iomap(np, 0) + MPC85xx_PMUXCR_OFFSET;
if (!pmuxcr)
printk(KERN_EMERG "Error: Alternate function"
" signal multiplex control register not"
" mapped!\n");
else
/* P1021 has pins muxed for QE and other functions. To
* enable QE UEC mode, we need to set bit QE0 for UCC1
* in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
* and QE12 for QE MII management signals in PMUXCR
* register.
*/
setbits32(pmuxcr, MPC85xx_PMUXCR_QE0 |
MPC85xx_PMUXCR_QE3 |
MPC85xx_PMUXCR_QE9 |
MPC85xx_PMUXCR_QE12);
of_node_put(np);
}
}
}
static void __init mpc85xx_mds_qeic_init(void)
{
struct device_node *np;
np = of_find_compatible_node(NULL, NULL, "fsl,qe");
if (!of_device_is_available(np)) {
of_node_put(np);
return;
}
np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
if (!np) {
np = of_find_node_by_type(NULL, "qeic");
if (!np)
return;
}
if (machine_is(p1021_mds))
qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
qe_ic_cascade_high_mpic);
else
qe_ic_init(np, 0, qe_ic_cascade_muxed_mpic, NULL);
of_node_put(np);
}
#else
static void __init mpc85xx_mds_qe_init(void) { }
static void __init mpc85xx_mds_qeic_init(void) { }
#endif /* CONFIG_QUICC_ENGINE */
static void __init mpc85xx_mds_setup_arch(void)
{
#ifdef CONFIG_PCI
struct pci_controller *hose;
struct device_node *np;
#endif
dma_addr_t max = 0xffffffff;
if (ppc_md.progress)
ppc_md.progress("mpc85xx_mds_setup_arch()", 0);
#ifdef CONFIG_PCI
for_each_node_by_type(np, "pci") {
if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
struct resource rsrc;
of_address_to_resource(np, 0, &rsrc);
if ((rsrc.start & 0xfffff) == 0x8000)
fsl_add_bridge(np, 1);
else
fsl_add_bridge(np, 0);
hose = pci_find_hose_for_OF_device(np);
max = min(max, hose->dma_window_base_cur +
hose->dma_window_size);
}
}
#endif
mpc85xx_smp_init();
mpc85xx_mds_qe_init();
#ifdef CONFIG_SWIOTLB
if (memblock_end_of_DRAM() > max) {
ppc_swiotlb_enable = 1;
set_pci_dma_ops(&swiotlb_dma_ops);
ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_swiotlb;
}
#endif
}
static int __init board_fixups(void)
{
char phy_id[20];
char *compstrs[2] = {"fsl,gianfar-mdio", "fsl,ucc-mdio"};
struct device_node *mdio;
struct resource res;
int i;
for (i = 0; i < ARRAY_SIZE(compstrs); i++) {
mdio = of_find_compatible_node(NULL, NULL, compstrs[i]);
of_address_to_resource(mdio, 0, &res);
snprintf(phy_id, sizeof(phy_id), "%llx:%02x",
(unsigned long long)res.start, 1);
phy_register_fixup_for_id(phy_id, mpc8568_fixup_125_clock);
phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
/* Register a workaround for errata */
snprintf(phy_id, sizeof(phy_id), "%llx:%02x",
(unsigned long long)res.start, 7);
phy_register_fixup_for_id(phy_id, mpc8568_mds_phy_fixups);
of_node_put(mdio);
}
return 0;
}
machine_arch_initcall(mpc8568_mds, board_fixups);
machine_arch_initcall(mpc8569_mds, board_fixups);
static struct of_device_id mpc85xx_ids[] = {
{ .compatible = "fsl,mpc8548-guts", },
{ .compatible = "gpio-leds", },
{},
};
static int __init mpc85xx_publish_devices(void)
{
if (machine_is(mpc8568_mds))
simple_gpiochip_init("fsl,mpc8568mds-bcsr-gpio");
if (machine_is(mpc8569_mds))
simple_gpiochip_init("fsl,mpc8569mds-bcsr-gpio");
mpc85xx_common_publish_devices();
of_platform_bus_probe(NULL, mpc85xx_ids, NULL);
return 0;
}
machine_device_initcall(mpc8568_mds, mpc85xx_publish_devices);
machine_device_initcall(mpc8569_mds, mpc85xx_publish_devices);
machine_device_initcall(p1021_mds, mpc85xx_common_publish_devices);
machine_arch_initcall(mpc8568_mds, swiotlb_setup_bus_notifier);
machine_arch_initcall(mpc8569_mds, swiotlb_setup_bus_notifier);
machine_arch_initcall(p1021_mds, swiotlb_setup_bus_notifier);
static void __init mpc85xx_mds_pic_init(void)
{
struct mpic *mpic = mpic_alloc(NULL, 0,
MPIC_WANTS_RESET | MPIC_BIG_ENDIAN |
MPIC_BROKEN_FRR_NIRQS | MPIC_SINGLE_DEST_CPU,
0, 256, " OpenPIC ");
BUG_ON(mpic == NULL);
mpic_init(mpic);
mpc85xx_mds_qeic_init();
}
static int __init mpc85xx_mds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "MPC85xxMDS");
}
define_machine(mpc8568_mds) {
.name = "MPC8568 MDS",
.probe = mpc85xx_mds_probe,
.setup_arch = mpc85xx_mds_setup_arch,
.init_IRQ = mpc85xx_mds_pic_init,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
};
static int __init mpc8569_mds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "fsl,MPC8569EMDS");
}
define_machine(mpc8569_mds) {
.name = "MPC8569 MDS",
.probe = mpc8569_mds_probe,
.setup_arch = mpc85xx_mds_setup_arch,
.init_IRQ = mpc85xx_mds_pic_init,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
};
static int __init p1021_mds_probe(void)
{
unsigned long root = of_get_flat_dt_root();
return of_flat_dt_is_compatible(root, "fsl,P1021MDS");
}
define_machine(p1021_mds) {
.name = "P1021 MDS",
.probe = p1021_mds_probe,
.setup_arch = mpc85xx_mds_setup_arch,
.init_IRQ = mpc85xx_mds_pic_init,
.get_irq = mpic_get_irq,
.restart = fsl_rstcr_restart,
.calibrate_decr = generic_calibrate_decr,
.progress = udbg_progress,
#ifdef CONFIG_PCI
.pcibios_fixup_bus = fsl_pcibios_fixup_bus,
#endif
};