- 根目录:
- arch
- arm
- mach-spear3xx
- clock.c
/*
* arch/arm/mach-spear3xx/clock.c
*
* SPEAr3xx machines clock framework source file
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <asm/mach-types.h>
#include <plat/clock.h>
#include <mach/misc_regs.h>
/* root clks */
/* 32 KHz oscillator clock */
static struct clk osc_32k_clk = {
.flags = ALWAYS_ENABLED,
.rate = 32000,
};
/* 24 MHz oscillator clock */
static struct clk osc_24m_clk = {
.flags = ALWAYS_ENABLED,
.rate = 24000000,
};
/* clock derived from 32 KHz osc clk */
/* rtc clock */
static struct clk rtc_clk = {
.pclk = &osc_32k_clk,
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = RTC_CLK_ENB,
.recalc = &follow_parent,
};
/* clock derived from 24 MHz osc clk */
/* pll masks structure */
static struct pll_clk_masks pll1_masks = {
.mode_mask = PLL_MODE_MASK,
.mode_shift = PLL_MODE_SHIFT,
.norm_fdbk_m_mask = PLL_NORM_FDBK_M_MASK,
.norm_fdbk_m_shift = PLL_NORM_FDBK_M_SHIFT,
.dith_fdbk_m_mask = PLL_DITH_FDBK_M_MASK,
.dith_fdbk_m_shift = PLL_DITH_FDBK_M_SHIFT,
.div_p_mask = PLL_DIV_P_MASK,
.div_p_shift = PLL_DIV_P_SHIFT,
.div_n_mask = PLL_DIV_N_MASK,
.div_n_shift = PLL_DIV_N_SHIFT,
};
/* pll1 configuration structure */
static struct pll_clk_config pll1_config = {
.mode_reg = PLL1_CTR,
.cfg_reg = PLL1_FRQ,
.masks = &pll1_masks,
};
/* pll rate configuration table, in ascending order of rates */
struct pll_rate_tbl pll_rtbl[] = {
{.mode = 0, .m = 0x85, .n = 0x0C, .p = 0x1}, /* 266 MHz */
{.mode = 0, .m = 0xA6, .n = 0x0C, .p = 0x1}, /* 332 MHz */
};
/* PLL1 clock */
static struct clk pll1_clk = {
.flags = ENABLED_ON_INIT,
.pclk = &osc_24m_clk,
.en_reg = PLL1_CTR,
.en_reg_bit = PLL_ENABLE,
.calc_rate = &pll_calc_rate,
.recalc = &pll_clk_recalc,
.set_rate = &pll_clk_set_rate,
.rate_config = {pll_rtbl, ARRAY_SIZE(pll_rtbl), 1},
.private_data = &pll1_config,
};
/* PLL3 48 MHz clock */
static struct clk pll3_48m_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &osc_24m_clk,
.rate = 48000000,
};
/* watch dog timer clock */
static struct clk wdt_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &osc_24m_clk,
.recalc = &follow_parent,
};
/* clock derived from pll1 clk */
/* cpu clock */
static struct clk cpu_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
.recalc = &follow_parent,
};
/* ahb masks structure */
static struct bus_clk_masks ahb_masks = {
.mask = PLL_HCLK_RATIO_MASK,
.shift = PLL_HCLK_RATIO_SHIFT,
};
/* ahb configuration structure */
static struct bus_clk_config ahb_config = {
.reg = CORE_CLK_CFG,
.masks = &ahb_masks,
};
/* ahb rate configuration table, in ascending order of rates */
struct bus_rate_tbl bus_rtbl[] = {
{.div = 3}, /* == parent divided by 4 */
{.div = 2}, /* == parent divided by 3 */
{.div = 1}, /* == parent divided by 2 */
{.div = 0}, /* == parent divided by 1 */
};
/* ahb clock */
static struct clk ahb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
.calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
.set_rate = &bus_clk_set_rate,
.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &ahb_config,
};
/* auxiliary synthesizers masks */
static struct aux_clk_masks aux_masks = {
.eq_sel_mask = AUX_EQ_SEL_MASK,
.eq_sel_shift = AUX_EQ_SEL_SHIFT,
.eq1_mask = AUX_EQ1_SEL,
.eq2_mask = AUX_EQ2_SEL,
.xscale_sel_mask = AUX_XSCALE_MASK,
.xscale_sel_shift = AUX_XSCALE_SHIFT,
.yscale_sel_mask = AUX_YSCALE_MASK,
.yscale_sel_shift = AUX_YSCALE_SHIFT,
};
/* uart synth configurations */
static struct aux_clk_config uart_synth_config = {
.synth_reg = UART_CLK_SYNT,
.masks = &aux_masks,
};
/* aux rate configuration table, in ascending order of rates */
struct aux_rate_tbl aux_rtbl[] = {
/* For PLL1 = 332 MHz */
{.xscale = 1, .yscale = 8, .eq = 1}, /* 41.5 MHz */
{.xscale = 1, .yscale = 4, .eq = 1}, /* 83 MHz */
{.xscale = 1, .yscale = 2, .eq = 1}, /* 166 MHz */
};
/* uart synth clock */
static struct clk uart_synth_clk = {
.en_reg = UART_CLK_SYNT,
.en_reg_bit = AUX_SYNT_ENB,
.pclk = &pll1_clk,
.calc_rate = &aux_calc_rate,
.recalc = &aux_clk_recalc,
.set_rate = &aux_clk_set_rate,
.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
.private_data = &uart_synth_config,
};
/* uart parents */
static struct pclk_info uart_pclk_info[] = {
{
.pclk = &uart_synth_clk,
.pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
.pclk_val = AUX_CLK_PLL3_VAL,
},
};
/* uart parent select structure */
static struct pclk_sel uart_pclk_sel = {
.pclk_info = uart_pclk_info,
.pclk_count = ARRAY_SIZE(uart_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = UART_CLK_MASK,
};
/* uart clock */
static struct clk uart_clk = {
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = UART_CLK_ENB,
.pclk_sel = &uart_pclk_sel,
.pclk_sel_shift = UART_CLK_SHIFT,
.recalc = &follow_parent,
};
/* firda configurations */
static struct aux_clk_config firda_synth_config = {
.synth_reg = FIRDA_CLK_SYNT,
.masks = &aux_masks,
};
/* firda synth clock */
static struct clk firda_synth_clk = {
.en_reg = FIRDA_CLK_SYNT,
.en_reg_bit = AUX_SYNT_ENB,
.pclk = &pll1_clk,
.calc_rate = &aux_calc_rate,
.recalc = &aux_clk_recalc,
.set_rate = &aux_clk_set_rate,
.rate_config = {aux_rtbl, ARRAY_SIZE(aux_rtbl), 1},
.private_data = &firda_synth_config,
};
/* firda parents */
static struct pclk_info firda_pclk_info[] = {
{
.pclk = &firda_synth_clk,
.pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
.pclk_val = AUX_CLK_PLL3_VAL,
},
};
/* firda parent select structure */
static struct pclk_sel firda_pclk_sel = {
.pclk_info = firda_pclk_info,
.pclk_count = ARRAY_SIZE(firda_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = FIRDA_CLK_MASK,
};
/* firda clock */
static struct clk firda_clk = {
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = FIRDA_CLK_ENB,
.pclk_sel = &firda_pclk_sel,
.pclk_sel_shift = FIRDA_CLK_SHIFT,
.recalc = &follow_parent,
};
/* gpt synthesizer masks */
static struct gpt_clk_masks gpt_masks = {
.mscale_sel_mask = GPT_MSCALE_MASK,
.mscale_sel_shift = GPT_MSCALE_SHIFT,
.nscale_sel_mask = GPT_NSCALE_MASK,
.nscale_sel_shift = GPT_NSCALE_SHIFT,
};
/* gpt rate configuration table, in ascending order of rates */
struct gpt_rate_tbl gpt_rtbl[] = {
/* For pll1 = 332 MHz */
{.mscale = 4, .nscale = 0}, /* 41.5 MHz */
{.mscale = 2, .nscale = 0}, /* 55.3 MHz */
{.mscale = 1, .nscale = 0}, /* 83 MHz */
};
/* gpt0 synth clk config*/
static struct gpt_clk_config gpt0_synth_config = {
.synth_reg = PRSC1_CLK_CFG,
.masks = &gpt_masks,
};
/* gpt synth clock */
static struct clk gpt0_synth_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
.calc_rate = &gpt_calc_rate,
.recalc = &gpt_clk_recalc,
.set_rate = &gpt_clk_set_rate,
.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
.private_data = &gpt0_synth_config,
};
/* gpt parents */
static struct pclk_info gpt0_pclk_info[] = {
{
.pclk = &gpt0_synth_clk,
.pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
.pclk_val = AUX_CLK_PLL3_VAL,
},
};
/* gpt parent select structure */
static struct pclk_sel gpt0_pclk_sel = {
.pclk_info = gpt0_pclk_info,
.pclk_count = ARRAY_SIZE(gpt0_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt0 timer clock */
static struct clk gpt0_clk = {
.flags = ALWAYS_ENABLED,
.pclk_sel = &gpt0_pclk_sel,
.pclk_sel_shift = GPT0_CLK_SHIFT,
.recalc = &follow_parent,
};
/* gpt1 synth clk configurations */
static struct gpt_clk_config gpt1_synth_config = {
.synth_reg = PRSC2_CLK_CFG,
.masks = &gpt_masks,
};
/* gpt1 synth clock */
static struct clk gpt1_synth_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
.calc_rate = &gpt_calc_rate,
.recalc = &gpt_clk_recalc,
.set_rate = &gpt_clk_set_rate,
.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
.private_data = &gpt1_synth_config,
};
static struct pclk_info gpt1_pclk_info[] = {
{
.pclk = &gpt1_synth_clk,
.pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
.pclk_val = AUX_CLK_PLL3_VAL,
},
};
/* gpt parent select structure */
static struct pclk_sel gpt1_pclk_sel = {
.pclk_info = gpt1_pclk_info,
.pclk_count = ARRAY_SIZE(gpt1_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt1 timer clock */
static struct clk gpt1_clk = {
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = GPT1_CLK_ENB,
.pclk_sel = &gpt1_pclk_sel,
.pclk_sel_shift = GPT1_CLK_SHIFT,
.recalc = &follow_parent,
};
/* gpt2 synth clk configurations */
static struct gpt_clk_config gpt2_synth_config = {
.synth_reg = PRSC3_CLK_CFG,
.masks = &gpt_masks,
};
/* gpt1 synth clock */
static struct clk gpt2_synth_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll1_clk,
.calc_rate = &gpt_calc_rate,
.recalc = &gpt_clk_recalc,
.set_rate = &gpt_clk_set_rate,
.rate_config = {gpt_rtbl, ARRAY_SIZE(gpt_rtbl), 2},
.private_data = &gpt2_synth_config,
};
static struct pclk_info gpt2_pclk_info[] = {
{
.pclk = &gpt2_synth_clk,
.pclk_val = AUX_CLK_PLL1_VAL,
}, {
.pclk = &pll3_48m_clk,
.pclk_val = AUX_CLK_PLL3_VAL,
},
};
/* gpt parent select structure */
static struct pclk_sel gpt2_pclk_sel = {
.pclk_info = gpt2_pclk_info,
.pclk_count = ARRAY_SIZE(gpt2_pclk_info),
.pclk_sel_reg = PERIP_CLK_CFG,
.pclk_sel_mask = GPT_CLK_MASK,
};
/* gpt2 timer clock */
static struct clk gpt2_clk = {
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = GPT2_CLK_ENB,
.pclk_sel = &gpt2_pclk_sel,
.pclk_sel_shift = GPT2_CLK_SHIFT,
.recalc = &follow_parent,
};
/* clock derived from pll3 clk */
/* usbh clock */
static struct clk usbh_clk = {
.pclk = &pll3_48m_clk,
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = USBH_CLK_ENB,
.recalc = &follow_parent,
};
/* usbd clock */
static struct clk usbd_clk = {
.pclk = &pll3_48m_clk,
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = USBD_CLK_ENB,
.recalc = &follow_parent,
};
/* clock derived from ahb clk */
/* apb masks structure */
static struct bus_clk_masks apb_masks = {
.mask = HCLK_PCLK_RATIO_MASK,
.shift = HCLK_PCLK_RATIO_SHIFT,
};
/* apb configuration structure */
static struct bus_clk_config apb_config = {
.reg = CORE_CLK_CFG,
.masks = &apb_masks,
};
/* apb clock */
static struct clk apb_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &ahb_clk,
.calc_rate = &bus_calc_rate,
.recalc = &bus_clk_recalc,
.set_rate = &bus_clk_set_rate,
.rate_config = {bus_rtbl, ARRAY_SIZE(bus_rtbl), 2},
.private_data = &apb_config,
};
/* i2c clock */
static struct clk i2c_clk = {
.pclk = &ahb_clk,
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = I2C_CLK_ENB,
.recalc = &follow_parent,
};
/* dma clock */
static struct clk dma_clk = {
.pclk = &ahb_clk,
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = DMA_CLK_ENB,
.recalc = &follow_parent,
};
/* jpeg clock */
static struct clk jpeg_clk = {
.pclk = &ahb_clk,
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = JPEG_CLK_ENB,
.recalc = &follow_parent,
};
/* gmac clock */
static struct clk gmac_clk = {
.pclk = &ahb_clk,
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = GMAC_CLK_ENB,
.recalc = &follow_parent,
};
/* smi clock */
static struct clk smi_clk = {
.pclk = &ahb_clk,
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = SMI_CLK_ENB,
.recalc = &follow_parent,
};
/* c3 clock */
static struct clk c3_clk = {
.pclk = &ahb_clk,
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = C3_CLK_ENB,
.recalc = &follow_parent,
};
/* clock derived from apb clk */
/* adc clock */
static struct clk adc_clk = {
.pclk = &apb_clk,
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = ADC_CLK_ENB,
.recalc = &follow_parent,
};
#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
/* emi clock */
static struct clk emi_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &ahb_clk,
.recalc = &follow_parent,
};
#endif
/* ssp clock */
static struct clk ssp0_clk = {
.pclk = &apb_clk,
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = SSP_CLK_ENB,
.recalc = &follow_parent,
};
/* gpio clock */
static struct clk gpio_clk = {
.pclk = &apb_clk,
.en_reg = PERIP1_CLK_ENB,
.en_reg_bit = GPIO_CLK_ENB,
.recalc = &follow_parent,
};
static struct clk dummy_apb_pclk;
#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR310) || \
defined(CONFIG_MACH_SPEAR320)
/* fsmc clock */
static struct clk fsmc_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &ahb_clk,
.recalc = &follow_parent,
};
#endif
/* common clocks to spear310 and spear320 */
#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320)
/* uart1 clock */
static struct clk uart1_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
/* uart2 clock */
static struct clk uart2_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
#endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */
/* common clocks to spear300 and spear320 */
#if defined(CONFIG_MACH_SPEAR300) || defined(CONFIG_MACH_SPEAR320)
/* clcd clock */
static struct clk clcd_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &pll3_48m_clk,
.recalc = &follow_parent,
};
/* sdhci clock */
static struct clk sdhci_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &ahb_clk,
.recalc = &follow_parent,
};
#endif /* CONFIG_MACH_SPEAR300 || CONFIG_MACH_SPEAR320 */
/* spear300 machine specific clock structures */
#ifdef CONFIG_MACH_SPEAR300
/* gpio1 clock */
static struct clk gpio1_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
/* keyboard clock */
static struct clk kbd_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
#endif
/* spear310 machine specific clock structures */
#ifdef CONFIG_MACH_SPEAR310
/* uart3 clock */
static struct clk uart3_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
/* uart4 clock */
static struct clk uart4_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
/* uart5 clock */
static struct clk uart5_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
#endif
/* spear320 machine specific clock structures */
#ifdef CONFIG_MACH_SPEAR320
/* can0 clock */
static struct clk can0_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
/* can1 clock */
static struct clk can1_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
/* i2c1 clock */
static struct clk i2c1_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &ahb_clk,
.recalc = &follow_parent,
};
/* ssp1 clock */
static struct clk ssp1_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
/* ssp2 clock */
static struct clk ssp2_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
/* pwm clock */
static struct clk pwm_clk = {
.flags = ALWAYS_ENABLED,
.pclk = &apb_clk,
.recalc = &follow_parent,
};
#endif
/* array of all spear 3xx clock lookups */
static struct clk_lookup spear_clk_lookups[] = {
{ .con_id = "apb_pclk", .clk = &dummy_apb_pclk},
/* root clks */
{ .con_id = "osc_32k_clk", .clk = &osc_32k_clk},
{ .con_id = "osc_24m_clk", .clk = &osc_24m_clk},
/* clock derived from 32 KHz osc clk */
{ .dev_id = "rtc-spear", .clk = &rtc_clk},
/* clock derived from 24 MHz osc clk */
{ .con_id = "pll1_clk", .clk = &pll1_clk},
{ .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk},
{ .dev_id = "wdt", .clk = &wdt_clk},
/* clock derived from pll1 clk */
{ .con_id = "cpu_clk", .clk = &cpu_clk},
{ .con_id = "ahb_clk", .clk = &ahb_clk},
{ .con_id = "uart_synth_clk", .clk = &uart_synth_clk},
{ .con_id = "firda_synth_clk", .clk = &firda_synth_clk},
{ .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk},
{ .con_id = "gpt1_synth_clk", .clk = &gpt1_synth_clk},
{ .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk},
{ .dev_id = "uart", .clk = &uart_clk},
{ .dev_id = "firda", .clk = &firda_clk},
{ .dev_id = "gpt0", .clk = &gpt0_clk},
{ .dev_id = "gpt1", .clk = &gpt1_clk},
{ .dev_id = "gpt2", .clk = &gpt2_clk},
/* clock derived from pll3 clk */
{ .dev_id = "designware_udc", .clk = &usbd_clk},
{ .con_id = "usbh_clk", .clk = &usbh_clk},
/* clock derived from ahb clk */
{ .con_id = "apb_clk", .clk = &apb_clk},
{ .dev_id = "i2c_designware.0", .clk = &i2c_clk},
{ .dev_id = "dma", .clk = &dma_clk},
{ .dev_id = "jpeg", .clk = &jpeg_clk},
{ .dev_id = "gmac", .clk = &gmac_clk},
{ .dev_id = "smi", .clk = &smi_clk},
{ .dev_id = "c3", .clk = &c3_clk},
/* clock derived from apb clk */
{ .dev_id = "adc", .clk = &adc_clk},
{ .dev_id = "ssp-pl022.0", .clk = &ssp0_clk},
{ .dev_id = "gpio", .clk = &gpio_clk},
};
/* array of all spear 300 clock lookups */
#ifdef CONFIG_MACH_SPEAR300
static struct clk_lookup spear300_clk_lookups[] = {
{ .dev_id = "clcd", .clk = &clcd_clk},
{ .con_id = "fsmc", .clk = &fsmc_clk},
{ .dev_id = "gpio1", .clk = &gpio1_clk},
{ .dev_id = "keyboard", .clk = &kbd_clk},
{ .dev_id = "sdhci", .clk = &sdhci_clk},
};
#endif
/* array of all spear 310 clock lookups */
#ifdef CONFIG_MACH_SPEAR310
static struct clk_lookup spear310_clk_lookups[] = {
{ .con_id = "fsmc", .clk = &fsmc_clk},
{ .con_id = "emi", .clk = &emi_clk},
{ .dev_id = "uart1", .clk = &uart1_clk},
{ .dev_id = "uart2", .clk = &uart2_clk},
{ .dev_id = "uart3", .clk = &uart3_clk},
{ .dev_id = "uart4", .clk = &uart4_clk},
{ .dev_id = "uart5", .clk = &uart5_clk},
};
#endif
/* array of all spear 320 clock lookups */
#ifdef CONFIG_MACH_SPEAR320
static struct clk_lookup spear320_clk_lookups[] = {
{ .dev_id = "clcd", .clk = &clcd_clk},
{ .con_id = "fsmc", .clk = &fsmc_clk},
{ .dev_id = "i2c_designware.1", .clk = &i2c1_clk},
{ .con_id = "emi", .clk = &emi_clk},
{ .dev_id = "pwm", .clk = &pwm_clk},
{ .dev_id = "sdhci", .clk = &sdhci_clk},
{ .dev_id = "c_can_platform.0", .clk = &can0_clk},
{ .dev_id = "c_can_platform.1", .clk = &can1_clk},
{ .dev_id = "ssp-pl022.1", .clk = &ssp1_clk},
{ .dev_id = "ssp-pl022.2", .clk = &ssp2_clk},
{ .dev_id = "uart1", .clk = &uart1_clk},
{ .dev_id = "uart2", .clk = &uart2_clk},
};
#endif
void __init spear3xx_clk_init(void)
{
int i, cnt;
struct clk_lookup *lookups;
if (machine_is_spear300()) {
cnt = ARRAY_SIZE(spear300_clk_lookups);
lookups = spear300_clk_lookups;
} else if (machine_is_spear310()) {
cnt = ARRAY_SIZE(spear310_clk_lookups);
lookups = spear310_clk_lookups;
} else {
cnt = ARRAY_SIZE(spear320_clk_lookups);
lookups = spear320_clk_lookups;
}
for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++)
clk_register(&spear_clk_lookups[i]);
for (i = 0; i < cnt; i++)
clk_register(&lookups[i]);
clk_init();
}