/* * arch/arm/mach-ixp23xx/ixdp2351.c * * IXDP2351 board-specific routines * * Author: Deepak Saxena <dsaxena@plexity.net> * * Copyright 2005 (c) MontaVista Software, Inc. * * Based on 2.4 code Copyright 2004 (c) Intel Corporation * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ #include <linux/kernel.h> #include <linux/init.h> #include <linux/spinlock.h> #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/serial.h> #include <linux/tty.h> #include <linux/bitops.h> #include <linux/ioport.h> #include <linux/serial_8250.h> #include <linux/serial_core.h> #include <linux/device.h> #include <linux/mm.h> #include <linux/pci.h> #include <linux/mtd/physmap.h> #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/system.h> #include <asm/tlbflush.h> #include <asm/pgtable.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> /* * IXDP2351 Interrupt Handling */ static void ixdp2351_inta_mask(struct irq_data *d) { *IXDP2351_CPLD_INTA_MASK_SET_REG = IXDP2351_INTA_IRQ_MASK(d->irq); } static void ixdp2351_inta_unmask(struct irq_data *d) { *IXDP2351_CPLD_INTA_MASK_CLR_REG = IXDP2351_INTA_IRQ_MASK(d->irq); } static void ixdp2351_inta_handler(unsigned int irq, struct irq_desc *desc) { u16 ex_interrupt = *IXDP2351_CPLD_INTA_STAT_REG & IXDP2351_INTA_IRQ_VALID; int i; desc->irq_data.chip->irq_mask(&desc->irq_data); for (i = 0; i < IXDP2351_INTA_IRQ_NUM; i++) { if (ex_interrupt & (1 << i)) { int cpld_irq = IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + i); generic_handle_irq(cpld_irq); } } desc->irq_data.chip->irq_unmask(&desc->irq_data); } static struct irq_chip ixdp2351_inta_chip = { .irq_ack = ixdp2351_inta_mask, .irq_mask = ixdp2351_inta_mask, .irq_unmask = ixdp2351_inta_unmask }; static void ixdp2351_intb_mask(struct irq_data *d) { *IXDP2351_CPLD_INTB_MASK_SET_REG = IXDP2351_INTB_IRQ_MASK(d->irq); } static void ixdp2351_intb_unmask(struct irq_data *d) { *IXDP2351_CPLD_INTB_MASK_CLR_REG = IXDP2351_INTB_IRQ_MASK(d->irq); } static void ixdp2351_intb_handler(unsigned int irq, struct irq_desc *desc) { u16 ex_interrupt = *IXDP2351_CPLD_INTB_STAT_REG & IXDP2351_INTB_IRQ_VALID; int i; desc->irq_data.chip->irq_ack(&desc->irq_data); for (i = 0; i < IXDP2351_INTB_IRQ_NUM; i++) { if (ex_interrupt & (1 << i)) { int cpld_irq = IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + i); generic_handle_irq(cpld_irq); } } desc->irq_data.chip->irq_unmask(&desc->irq_data); } static struct irq_chip ixdp2351_intb_chip = { .irq_ack = ixdp2351_intb_mask, .irq_mask = ixdp2351_intb_mask, .irq_unmask = ixdp2351_intb_unmask }; void __init ixdp2351_init_irq(void) { int irq; /* Mask all interrupts from CPLD, disable simulation */ *IXDP2351_CPLD_INTA_MASK_SET_REG = (u16) -1; *IXDP2351_CPLD_INTB_MASK_SET_REG = (u16) -1; *IXDP2351_CPLD_INTA_SIM_REG = 0; *IXDP2351_CPLD_INTB_SIM_REG = 0; ixp23xx_init_irq(); for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE); irq < IXP23XX_MACH_IRQ(IXDP2351_INTA_IRQ_BASE + IXDP2351_INTA_IRQ_NUM); irq++) { if (IXDP2351_INTA_IRQ_MASK(irq) & IXDP2351_INTA_IRQ_VALID) { set_irq_flags(irq, IRQF_VALID); irq_set_chip_and_handler(irq, &ixdp2351_inta_chip, handle_level_irq); } } for (irq = IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE); irq < IXP23XX_MACH_IRQ(IXDP2351_INTB_IRQ_BASE + IXDP2351_INTB_IRQ_NUM); irq++) { if (IXDP2351_INTB_IRQ_MASK(irq) & IXDP2351_INTB_IRQ_VALID) { set_irq_flags(irq, IRQF_VALID); irq_set_chip_and_handler(irq, &ixdp2351_intb_chip, handle_level_irq); } } irq_set_chained_handler(IRQ_IXP23XX_INTA, ixdp2351_inta_handler); irq_set_chained_handler(IRQ_IXP23XX_INTB, ixdp2351_intb_handler); } /* * IXDP2351 PCI */ /* * This board does not do normal PCI IRQ routing, or any * sort of swizzling, so we just need to check where on the * bus the device is and figure out what CPLD pin it is * being routed to. */ #define DEVPIN(dev, pin) ((pin) | ((dev) << 3)) static int __init ixdp2351_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { u8 bus = dev->bus->number; u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin); struct pci_bus *tmp_bus = dev->bus; /* Primary bus, no interrupts here */ if (!bus) return -1; /* Lookup first leaf in bus tree */ while ((tmp_bus->parent != NULL) && (tmp_bus->parent->parent != NULL)) tmp_bus = tmp_bus->parent; /* Select between known bridges */ switch (tmp_bus->self->devfn | (tmp_bus->self->bus->number << 8)) { /* Device is located after first bridge */ case 0x0008: if (tmp_bus == dev->bus) { /* Device is located directy after first bridge */ switch (devpin) { /* Onboard 82546 */ case DEVPIN(1, 1): /* Onboard 82546 ch 0 */ return IRQ_IXDP2351_INTA_82546; case DEVPIN(1, 2): /* Onboard 82546 ch 1 */ return IRQ_IXDP2351_INTB_82546; /* PMC SLOT */ case DEVPIN(0, 1): /* PMCP INTA# */ case DEVPIN(2, 4): /* PMCS INTD# */ return IRQ_IXDP2351_SPCI_PMC_INTA; case DEVPIN(0, 2): /* PMCP INTB# */ case DEVPIN(2, 1): /* PMCS INTA# */ return IRQ_IXDP2351_SPCI_PMC_INTB; case DEVPIN(0, 3): /* PMCP INTC# */ case DEVPIN(2, 2): /* PMCS INTB# */ return IRQ_IXDP2351_SPCI_PMC_INTC; case DEVPIN(0, 4): /* PMCP INTD# */ case DEVPIN(2, 3): /* PMCS INTC# */ return IRQ_IXDP2351_SPCI_PMC_INTD; } } else { /* Device is located indirectly after first bridge */ /* Not supported now */ return -1; } break; case 0x0010: if (tmp_bus == dev->bus) { /* Device is located directy after second bridge */ /* Secondary bus of second bridge */ switch (devpin) { case DEVPIN(0, 1): /* DB#0 */ case DEVPIN(0, 2): case DEVPIN(0, 3): case DEVPIN(0, 4): return IRQ_IXDP2351_SPCI_DB_0; case DEVPIN(1, 1): /* DB#1 */ case DEVPIN(1, 2): case DEVPIN(1, 3): case DEVPIN(1, 4): return IRQ_IXDP2351_SPCI_DB_1; case DEVPIN(2, 1): /* FIC1 */ case DEVPIN(2, 2): case DEVPIN(2, 3): case DEVPIN(2, 4): case DEVPIN(3, 1): /* FIC2 */ case DEVPIN(3, 2): case DEVPIN(3, 3): case DEVPIN(3, 4): return IRQ_IXDP2351_SPCI_FIC; } } else { /* Device is located indirectly after second bridge */ /* Not supported now */ return -1; } break; } return -1; } struct hw_pci ixdp2351_pci __initdata = { .nr_controllers = 1, .preinit = ixp23xx_pci_preinit, .setup = ixp23xx_pci_setup, .scan = ixp23xx_pci_scan_bus, .map_irq = ixdp2351_map_irq, }; int __init ixdp2351_pci_init(void) { if (machine_is_ixdp2351()) pci_common_init(&ixdp2351_pci); return 0; } subsys_initcall(ixdp2351_pci_init); /* * IXDP2351 Static Mapped I/O */ static struct map_desc ixdp2351_io_desc[] __initdata = { { .virtual = IXDP2351_NP_VIRT_BASE, .pfn = __phys_to_pfn((u64)IXDP2351_NP_PHYS_BASE), .length = IXDP2351_NP_PHYS_SIZE, .type = MT_DEVICE }, { .virtual = IXDP2351_BB_BASE_VIRT, .pfn = __phys_to_pfn((u64)IXDP2351_BB_BASE_PHYS), .length = IXDP2351_BB_SIZE, .type = MT_DEVICE } }; static void __init ixdp2351_map_io(void) { ixp23xx_map_io(); iotable_init(ixdp2351_io_desc, ARRAY_SIZE(ixdp2351_io_desc)); } static struct physmap_flash_data ixdp2351_flash_data = { .width = 1, }; static struct resource ixdp2351_flash_resource = { .start = 0x90000000, .end = 0x93ffffff, .flags = IORESOURCE_MEM, }; static struct platform_device ixdp2351_flash = { .name = "physmap-flash", .id = 0, .dev = { .platform_data = &ixdp2351_flash_data, }, .num_resources = 1, .resource = &ixdp2351_flash_resource, }; static void __init ixdp2351_init(void) { platform_device_register(&ixdp2351_flash); /* * Mark flash as writeable */ IXP23XX_EXP_CS0[0] |= IXP23XX_FLASH_WRITABLE; IXP23XX_EXP_CS0[1] |= IXP23XX_FLASH_WRITABLE; IXP23XX_EXP_CS0[2] |= IXP23XX_FLASH_WRITABLE; IXP23XX_EXP_CS0[3] |= IXP23XX_FLASH_WRITABLE; ixp23xx_sys_init(); } static void ixdp2351_restart(char mode, const char *cmd) { /* First try machine specific support */ *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_MAGIC; (void) *IXDP2351_CPLD_RESET1_REG; *IXDP2351_CPLD_RESET1_REG = IXDP2351_CPLD_RESET1_ENABLE; ixp23xx_restart(mode, cmd); } MACHINE_START(IXDP2351, "Intel IXDP2351 Development Platform") /* Maintainer: MontaVista Software, Inc. */ .map_io = ixdp2351_map_io, .init_irq = ixdp2351_init_irq, .timer = &ixp23xx_timer, .atag_offset = 0x100, .init_machine = ixdp2351_init, .restart = ixdp2351_restart, MACHINE_END