- 根目录:
- drivers
- clk
- ti
- dpll.c
/*
* OMAP DPLL clock support
*
* Copyright (C) 2013 Texas Instruments, Inc.
*
* Tero Kristo <t-kristo@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/clk-provider.h>
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/clk/ti.h>
#undef pr_fmt
#define pr_fmt(fmt) "%s: " fmt, __func__
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
defined(CONFIG_SOC_DRA7XX)
static const struct clk_ops dpll_m4xen_ck_ops = {
.enable = &omap3_noncore_dpll_enable,
.disable = &omap3_noncore_dpll_disable,
.recalc_rate = &omap4_dpll_regm4xen_recalc,
.round_rate = &omap4_dpll_regm4xen_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
.get_parent = &omap2_init_dpll_parent,
};
#else
static const struct clk_ops dpll_m4xen_ck_ops = {};
#endif
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) || \
defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) || \
defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
static const struct clk_ops dpll_core_ck_ops = {
.recalc_rate = &omap3_dpll_recalc,
.get_parent = &omap2_init_dpll_parent,
};
static const struct clk_ops dpll_ck_ops = {
.enable = &omap3_noncore_dpll_enable,
.disable = &omap3_noncore_dpll_disable,
.recalc_rate = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
.get_parent = &omap2_init_dpll_parent,
};
static const struct clk_ops dpll_no_gate_ck_ops = {
.recalc_rate = &omap3_dpll_recalc,
.get_parent = &omap2_init_dpll_parent,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
};
#else
static const struct clk_ops dpll_core_ck_ops = {};
static const struct clk_ops dpll_ck_ops = {};
static const struct clk_ops dpll_no_gate_ck_ops = {};
const struct clk_hw_omap_ops clkhwops_omap3_dpll = {};
#endif
#ifdef CONFIG_ARCH_OMAP2
static const struct clk_ops omap2_dpll_core_ck_ops = {
.get_parent = &omap2_init_dpll_parent,
.recalc_rate = &omap2_dpllcore_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap2_reprogram_dpllcore,
};
#else
static const struct clk_ops omap2_dpll_core_ck_ops = {};
#endif
#ifdef CONFIG_ARCH_OMAP3
static const struct clk_ops omap3_dpll_core_ck_ops = {
.get_parent = &omap2_init_dpll_parent,
.recalc_rate = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
};
#else
static const struct clk_ops omap3_dpll_core_ck_ops = {};
#endif
#ifdef CONFIG_ARCH_OMAP3
static const struct clk_ops omap3_dpll_ck_ops = {
.enable = &omap3_noncore_dpll_enable,
.disable = &omap3_noncore_dpll_disable,
.get_parent = &omap2_init_dpll_parent,
.recalc_rate = &omap3_dpll_recalc,
.set_rate = &omap3_noncore_dpll_set_rate,
.round_rate = &omap2_dpll_round_rate,
};
static const struct clk_ops omap3_dpll_per_ck_ops = {
.enable = &omap3_noncore_dpll_enable,
.disable = &omap3_noncore_dpll_disable,
.get_parent = &omap2_init_dpll_parent,
.recalc_rate = &omap3_dpll_recalc,
.set_rate = &omap3_dpll4_set_rate,
.round_rate = &omap2_dpll_round_rate,
};
#endif
static const struct clk_ops dpll_x2_ck_ops = {
.recalc_rate = &omap3_clkoutx2_recalc,
};
/**
* ti_clk_register_dpll - low level registration of a DPLL clock
* @hw: hardware clock definition for the clock
* @node: device node for the clock
*
* Finalizes DPLL registration process. In case a failure (clk-ref or
* clk-bypass is missing), the clock is added to retry list and
* the initialization is retried on later stage.
*/
static void __init ti_clk_register_dpll(struct clk_hw *hw,
struct device_node *node)
{
struct clk_hw_omap *clk_hw = to_clk_hw_omap(hw);
struct dpll_data *dd = clk_hw->dpll_data;
struct clk *clk;
dd->clk_ref = of_clk_get(node, 0);
dd->clk_bypass = of_clk_get(node, 1);
if (IS_ERR(dd->clk_ref) || IS_ERR(dd->clk_bypass)) {
pr_debug("clk-ref or clk-bypass missing for %s, retry later\n",
node->name);
if (!ti_clk_retry_init(node, hw, ti_clk_register_dpll))
return;
goto cleanup;
}
/* register the clock */
clk = clk_register(NULL, &clk_hw->hw);
if (!IS_ERR(clk)) {
omap2_init_clk_hw_omap_clocks(clk);
of_clk_add_provider(node, of_clk_src_simple_get, clk);
kfree(clk_hw->hw.init->parent_names);
kfree(clk_hw->hw.init);
return;
}
cleanup:
kfree(clk_hw->dpll_data);
kfree(clk_hw->hw.init->parent_names);
kfree(clk_hw->hw.init);
kfree(clk_hw);
}
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX) || \
defined(CONFIG_SOC_AM43XX)
/**
* ti_clk_register_dpll_x2 - Registers a DPLLx2 clock
* @node: device node for this clock
* @ops: clk_ops for this clock
* @hw_ops: clk_hw_ops for this clock
*
* Initializes a DPLL x 2 clock from device tree data.
*/
static void ti_clk_register_dpll_x2(struct device_node *node,
const struct clk_ops *ops,
const struct clk_hw_omap_ops *hw_ops)
{
struct clk *clk;
struct clk_init_data init = { NULL };
struct clk_hw_omap *clk_hw;
const char *name = node->name;
const char *parent_name;
parent_name = of_clk_get_parent_name(node, 0);
if (!parent_name) {
pr_err("%s must have parent\n", node->name);
return;
}
clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
if (!clk_hw)
return;
clk_hw->ops = hw_ops;
clk_hw->hw.init = &init;
init.name = name;
init.ops = ops;
init.parent_names = &parent_name;
init.num_parents = 1;
/* register the clock */
clk = clk_register(NULL, &clk_hw->hw);
if (IS_ERR(clk)) {
kfree(clk_hw);
} else {
omap2_init_clk_hw_omap_clocks(clk);
of_clk_add_provider(node, of_clk_src_simple_get, clk);
}
}
#endif
/**
* of_ti_dpll_setup - Setup function for OMAP DPLL clocks
* @node: device node containing the DPLL info
* @ops: ops for the DPLL
* @ddt: DPLL data template to use
*
* Initializes a DPLL clock from device tree data.
*/
static void __init of_ti_dpll_setup(struct device_node *node,
const struct clk_ops *ops,
const struct dpll_data *ddt)
{
struct clk_hw_omap *clk_hw = NULL;
struct clk_init_data *init = NULL;
const char **parent_names = NULL;
struct dpll_data *dd = NULL;
int i;
u8 dpll_mode = 0;
dd = kzalloc(sizeof(*dd), GFP_KERNEL);
clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL);
init = kzalloc(sizeof(*init), GFP_KERNEL);
if (!dd || !clk_hw || !init)
goto cleanup;
memcpy(dd, ddt, sizeof(*dd));
clk_hw->dpll_data = dd;
clk_hw->ops = &clkhwops_omap3_dpll;
clk_hw->hw.init = init;
clk_hw->flags = MEMMAP_ADDRESSING;
init->name = node->name;
init->ops = ops;
init->num_parents = of_clk_get_parent_count(node);
if (init->num_parents < 1) {
pr_err("%s must have parent(s)\n", node->name);
goto cleanup;
}
parent_names = kzalloc(sizeof(char *) * init->num_parents, GFP_KERNEL);
if (!parent_names)
goto cleanup;
for (i = 0; i < init->num_parents; i++)
parent_names[i] = of_clk_get_parent_name(node, i);
init->parent_names = parent_names;
dd->control_reg = ti_clk_get_reg_addr(node, 0);
/*
* Special case for OMAP2 DPLL, register order is different due to
* missing idlest_reg, also clkhwops is different. Detected from
* missing idlest_mask.
*/
if (!dd->idlest_mask) {
dd->mult_div1_reg = ti_clk_get_reg_addr(node, 1);
#ifdef CONFIG_ARCH_OMAP2
clk_hw->ops = &clkhwops_omap2xxx_dpll;
omap2xxx_clkt_dpllcore_init(&clk_hw->hw);
#endif
} else {
dd->idlest_reg = ti_clk_get_reg_addr(node, 1);
if (!dd->idlest_reg)
goto cleanup;
dd->mult_div1_reg = ti_clk_get_reg_addr(node, 2);
}
if (!dd->control_reg || !dd->mult_div1_reg)
goto cleanup;
if (dd->autoidle_mask) {
dd->autoidle_reg = ti_clk_get_reg_addr(node, 3);
if (!dd->autoidle_reg)
goto cleanup;
}
if (of_property_read_bool(node, "ti,low-power-stop"))
dpll_mode |= 1 << DPLL_LOW_POWER_STOP;
if (of_property_read_bool(node, "ti,low-power-bypass"))
dpll_mode |= 1 << DPLL_LOW_POWER_BYPASS;
if (of_property_read_bool(node, "ti,lock"))
dpll_mode |= 1 << DPLL_LOCKED;
if (dpll_mode)
dd->modes = dpll_mode;
ti_clk_register_dpll(&clk_hw->hw, node);
return;
cleanup:
kfree(dd);
kfree(parent_names);
kfree(init);
kfree(clk_hw);
}
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
defined(CONFIG_SOC_DRA7XX)
static void __init of_ti_omap4_dpll_x2_setup(struct device_node *node)
{
ti_clk_register_dpll_x2(node, &dpll_x2_ck_ops, &clkhwops_omap4_dpllmx);
}
CLK_OF_DECLARE(ti_omap4_dpll_x2_clock, "ti,omap4-dpll-x2-clock",
of_ti_omap4_dpll_x2_setup);
#endif
#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
static void __init of_ti_am3_dpll_x2_setup(struct device_node *node)
{
ti_clk_register_dpll_x2(node, &dpll_x2_ck_ops, NULL);
}
CLK_OF_DECLARE(ti_am3_dpll_x2_clock, "ti,am3-dpll-x2-clock",
of_ti_am3_dpll_x2_setup);
#endif
#ifdef CONFIG_ARCH_OMAP3
static void __init of_ti_omap3_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.autoidle_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.freqsel_mask = 0xf0,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_omap3_dpll_clock, "ti,omap3-dpll-clock",
of_ti_omap3_dpll_setup);
static void __init of_ti_omap3_core_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.autoidle_mask = 0x7,
.mult_mask = 0x7ff << 16,
.div1_mask = 0x7f << 8,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.freqsel_mask = 0xf0,
};
of_ti_dpll_setup(node, &omap3_dpll_core_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_omap3_core_dpll_clock, "ti,omap3-dpll-core-clock",
of_ti_omap3_core_dpll_setup);
static void __init of_ti_omap3_per_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1 << 1,
.enable_mask = 0x7 << 16,
.autoidle_mask = 0x7 << 3,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.freqsel_mask = 0xf00000,
.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_omap3_per_dpll_clock, "ti,omap3-dpll-per-clock",
of_ti_omap3_per_dpll_setup);
static void __init of_ti_omap3_per_jtype_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1 << 1,
.enable_mask = 0x7 << 16,
.autoidle_mask = 0x7 << 3,
.mult_mask = 0xfff << 8,
.div1_mask = 0x7f,
.max_multiplier = 4095,
.max_divider = 128,
.min_divider = 1,
.sddiv_mask = 0xff << 24,
.dco_mask = 0xe << 20,
.flags = DPLL_J_TYPE,
.modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_omap3_per_jtype_dpll_clock, "ti,omap3-dpll-per-j-type-clock",
of_ti_omap3_per_jtype_dpll_setup);
#endif
static void __init of_ti_omap4_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.autoidle_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_omap4_dpll_clock, "ti,omap4-dpll-clock",
of_ti_omap4_dpll_setup);
static void __init of_ti_omap5_mpu_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.autoidle_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.dcc_mask = BIT(22),
.dcc_rate = 1400000000, /* DCC beyond 1.4GHz */
.min_divider = 1,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_ck_ops, &dd);
}
CLK_OF_DECLARE(of_ti_omap5_mpu_dpll_clock, "ti,omap5-mpu-dpll-clock",
of_ti_omap5_mpu_dpll_setup);
static void __init of_ti_omap4_core_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.autoidle_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_omap4_core_dpll_clock, "ti,omap4-dpll-core-clock",
of_ti_omap4_core_dpll_setup);
#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
defined(CONFIG_SOC_DRA7XX)
static void __init of_ti_omap4_m4xen_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.autoidle_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.m4xen_mask = 0x800,
.lpmode_mask = 1 << 10,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_omap4_m4xen_dpll_clock, "ti,omap4-dpll-m4xen-clock",
of_ti_omap4_m4xen_dpll_setup);
static void __init of_ti_omap4_jtype_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.autoidle_mask = 0x7,
.mult_mask = 0xfff << 8,
.div1_mask = 0xff,
.max_multiplier = 4095,
.max_divider = 256,
.min_divider = 1,
.sddiv_mask = 0xff << 24,
.flags = DPLL_J_TYPE,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_omap4_jtype_dpll_clock, "ti,omap4-dpll-j-type-clock",
of_ti_omap4_jtype_dpll_setup);
#endif
static void __init of_ti_am3_no_gate_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_am3_no_gate_dpll_clock, "ti,am3-dpll-no-gate-clock",
of_ti_am3_no_gate_dpll_setup);
static void __init of_ti_am3_jtype_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 4095,
.max_divider = 256,
.min_divider = 2,
.flags = DPLL_J_TYPE,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_am3_jtype_dpll_clock, "ti,am3-dpll-j-type-clock",
of_ti_am3_jtype_dpll_setup);
static void __init of_ti_am3_no_gate_jtype_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.flags = DPLL_J_TYPE,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_am3_no_gate_jtype_dpll_clock,
"ti,am3-dpll-no-gate-j-type-clock",
of_ti_am3_no_gate_jtype_dpll_setup);
static void __init of_ti_am3_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_am3_dpll_clock, "ti,am3-dpll-clock", of_ti_am3_dpll_setup);
static void __init of_ti_am3_core_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.idlest_mask = 0x1,
.enable_mask = 0x7,
.mult_mask = 0x7ff << 8,
.div1_mask = 0x7f,
.max_multiplier = 2047,
.max_divider = 128,
.min_divider = 1,
.modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
};
of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_am3_core_dpll_clock, "ti,am3-dpll-core-clock",
of_ti_am3_core_dpll_setup);
static void __init of_ti_omap2_core_dpll_setup(struct device_node *node)
{
const struct dpll_data dd = {
.enable_mask = 0x3,
.mult_mask = 0x3ff << 12,
.div1_mask = 0xf << 8,
.max_divider = 16,
.min_divider = 1,
};
of_ti_dpll_setup(node, &omap2_dpll_core_ck_ops, &dd);
}
CLK_OF_DECLARE(ti_omap2_core_dpll_clock, "ti,omap2-dpll-core-clock",
of_ti_omap2_core_dpll_setup);