1. 根目录:
2. drivers
3. acpi
4. acpica
5. dscontrol.c

/******************************************************************************
 *
 * Module Name: dscontrol - Support for execution control opcodes -
 *                          if/else/while/return
 *
 *****************************************************************************/

/*
 * Copyright (C) 2000 - 2014, Intel Corp.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
 *    substantially similar to the "NO WARRANTY" disclaimer below
 *    ("Disclaimer") and any redistribution must be conditioned upon
 *    including a substantially similar Disclaimer requirement for further
 *    binary redistribution.
 * 3. Neither the names of the above-listed copyright holders nor the names
 *    of any contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * Alternatively, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2 as published by the Free
 * Software Foundation.
 *
 * NO WARRANTY
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGES.
 */

#include <acpi/acpi.h>
#include "accommon.h"
#include "amlcode.h"
#include "acdispat.h"
#include "acinterp.h"

#define _COMPONENT          ACPI_DISPATCHER
ACPI_MODULE_NAME("dscontrol")

/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_exec_begin_control_op
 *
 * PARAMETERS:  walk_list       - The list that owns the walk stack
 *              op              - The control Op
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Handles all control ops encountered during control method
 *              execution.
 *
 ******************************************************************************/
acpi_status
acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state,
			      union acpi_parse_object *op)
{
	acpi_status status = AE_OK;
	union acpi_generic_state *control_state;

	ACPI_FUNCTION_NAME(ds_exec_begin_control_op);

	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p Opcode=%2.2X State=%p\n",
			  op, op->common.aml_opcode, walk_state));

	switch (op->common.aml_opcode) {
	case AML_WHILE_OP:
		/*
		 * If this is an additional iteration of a while loop, continue.
		 * There is no need to allocate a new control state.
		 */
		if (walk_state->control_state) {
			if (walk_state->control_state->control.
			    aml_predicate_start ==
			    (walk_state->parser_state.aml - 1)) {

				/* Reset the state to start-of-loop */

				walk_state->control_state->common.state =
				    ACPI_CONTROL_CONDITIONAL_EXECUTING;
				break;
			}
		}

		/*lint -fallthrough */

	case AML_IF_OP:
		/*
		 * IF/WHILE: Create a new control state to manage these
		 * constructs. We need to manage these as a stack, in order
		 * to handle nesting.
		 */
		control_state = acpi_ut_create_control_state();
		if (!control_state) {
			status = AE_NO_MEMORY;
			break;
		}
		/*
		 * Save a pointer to the predicate for multiple executions
		 * of a loop
		 */
		control_state->control.aml_predicate_start =
		    walk_state->parser_state.aml - 1;
		control_state->control.package_end =
		    walk_state->parser_state.pkg_end;
		control_state->control.opcode = op->common.aml_opcode;

		/* Push the control state on this walk's control stack */

		acpi_ut_push_generic_state(&walk_state->control_state,
					   control_state);
		break;

	case AML_ELSE_OP:

		/* Predicate is in the state object */
		/* If predicate is true, the IF was executed, ignore ELSE part */

		if (walk_state->last_predicate) {
			status = AE_CTRL_TRUE;
		}

		break;

	case AML_RETURN_OP:

		break;

	default:

		break;
	}

	return (status);
}

/*******************************************************************************
 *
 * FUNCTION:    acpi_ds_exec_end_control_op
 *
 * PARAMETERS:  walk_list       - The list that owns the walk stack
 *              op              - The control Op
 *
 * RETURN:      Status
 *
 * DESCRIPTION: Handles all control ops encountered during control method
 *              execution.
 *
 ******************************************************************************/

acpi_status
acpi_ds_exec_end_control_op(struct acpi_walk_state * walk_state,
			    union acpi_parse_object * op)
{
	acpi_status status = AE_OK;
	union acpi_generic_state *control_state;

	ACPI_FUNCTION_NAME(ds_exec_end_control_op);

	switch (op->common.aml_opcode) {
	case AML_IF_OP:

		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "[IF_OP] Op=%p\n", op));

		/*
		 * Save the result of the predicate in case there is an
		 * ELSE to come
		 */
		walk_state->last_predicate =
		    (u8)walk_state->control_state->common.value;

		/*
		 * Pop the control state that was created at the start
		 * of the IF and free it
		 */
		control_state =
		    acpi_ut_pop_generic_state(&walk_state->control_state);
		acpi_ut_delete_generic_state(control_state);
		break;

	case AML_ELSE_OP:

		break;

	case AML_WHILE_OP:

		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "[WHILE_OP] Op=%p\n", op));

		control_state = walk_state->control_state;
		if (control_state->common.value) {

			/* Predicate was true, the body of the loop was just executed */

			/*
			 * This loop counter mechanism allows the interpreter to escape
			 * possibly infinite loops. This can occur in poorly written AML
			 * when the hardware does not respond within a while loop and the
			 * loop does not implement a timeout.
			 */
			control_state->control.loop_count++;
			if (control_state->control.loop_count >
			    ACPI_MAX_LOOP_ITERATIONS) {
				status = AE_AML_INFINITE_LOOP;
				break;
			}

			/*
			 * Go back and evaluate the predicate and maybe execute the loop
			 * another time
			 */
			status = AE_CTRL_PENDING;
			walk_state->aml_last_while =
			    control_state->control.aml_predicate_start;
			break;
		}

		/* Predicate was false, terminate this while loop */

		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
				  "[WHILE_OP] termination! Op=%p\n", op));

		/* Pop this control state and free it */

		control_state =
		    acpi_ut_pop_generic_state(&walk_state->control_state);
		acpi_ut_delete_generic_state(control_state);
		break;

	case AML_RETURN_OP:

		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
				  "[RETURN_OP] Op=%p Arg=%p\n", op,
				  op->common.value.arg));

		/*
		 * One optional operand -- the return value
		 * It can be either an immediate operand or a result that
		 * has been bubbled up the tree
		 */
		if (op->common.value.arg) {

			/* Since we have a real Return(), delete any implicit return */

			acpi_ds_clear_implicit_return(walk_state);

			/* Return statement has an immediate operand */

			status =
			    acpi_ds_create_operands(walk_state,
						    op->common.value.arg);
			if (ACPI_FAILURE(status)) {
				return (status);
			}

			/*
			 * If value being returned is a Reference (such as
			 * an arg or local), resolve it now because it may
			 * cease to exist at the end of the method.
			 */
			status =
			    acpi_ex_resolve_to_value(&walk_state->operands[0],
						     walk_state);
			if (ACPI_FAILURE(status)) {
				return (status);
			}

			/*
			 * Get the return value and save as the last result
			 * value. This is the only place where walk_state->return_desc
			 * is set to anything other than zero!
			 */
			walk_state->return_desc = walk_state->operands[0];
		} else if (walk_state->result_count) {

			/* Since we have a real Return(), delete any implicit return */

			acpi_ds_clear_implicit_return(walk_state);

			/*
			 * The return value has come from a previous calculation.
			 *
			 * If value being returned is a Reference (such as
			 * an arg or local), resolve it now because it may
			 * cease to exist at the end of the method.
			 *
			 * Allow references created by the Index operator to return
			 * unchanged.
			 */
			if ((ACPI_GET_DESCRIPTOR_TYPE
			     (walk_state->results->results.obj_desc[0]) ==
			     ACPI_DESC_TYPE_OPERAND)
			    && ((walk_state->results->results.obj_desc[0])->
				common.type == ACPI_TYPE_LOCAL_REFERENCE)
			    && ((walk_state->results->results.obj_desc[0])->
				reference.class != ACPI_REFCLASS_INDEX)) {
				status =
				    acpi_ex_resolve_to_value(&walk_state->
							     results->results.
							     obj_desc[0],
							     walk_state);
				if (ACPI_FAILURE(status)) {
					return (status);
				}
			}

			walk_state->return_desc =
			    walk_state->results->results.obj_desc[0];
		} else {
			/* No return operand */

			if (walk_state->num_operands) {
				acpi_ut_remove_reference(walk_state->
							 operands[0]);
			}

			walk_state->operands[0] = NULL;
			walk_state->num_operands = 0;
			walk_state->return_desc = NULL;
		}

		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
				  "Completed RETURN_OP State=%p, RetVal=%p\n",
				  walk_state, walk_state->return_desc));

		/* End the control method execution right now */

		status = AE_CTRL_TERMINATE;
		break;

	case AML_NOOP_OP:

		/* Just do nothing! */

		break;

	case AML_BREAK_POINT_OP:

		/*
		 * Set the single-step flag. This will cause the debugger (if present)
		 * to break to the console within the AML debugger at the start of the
		 * next AML instruction.
		 */
		ACPI_DEBUGGER_EXEC(acpi_gbl_cm_single_step = TRUE);
		ACPI_DEBUGGER_EXEC(acpi_os_printf
				   ("**break** Executed AML BreakPoint opcode\n"));

		/* Call to the OSL in case OS wants a piece of the action */

		status = acpi_os_signal(ACPI_SIGNAL_BREAKPOINT,
					"Executed AML Breakpoint opcode");
		break;

	case AML_BREAK_OP:
	case AML_CONTINUE_OP:	/* ACPI 2.0 */

		/* Pop and delete control states until we find a while */

		while (walk_state->control_state &&
		       (walk_state->control_state->control.opcode !=
			AML_WHILE_OP)) {
			control_state =
			    acpi_ut_pop_generic_state(&walk_state->
						      control_state);
			acpi_ut_delete_generic_state(control_state);
		}

		/* No while found? */

		if (!walk_state->control_state) {
			return (AE_AML_NO_WHILE);
		}

		/* Was: walk_state->aml_last_while = walk_state->control_state->Control.aml_predicate_start; */

		walk_state->aml_last_while =
		    walk_state->control_state->control.package_end;

		/* Return status depending on opcode */

		if (op->common.aml_opcode == AML_BREAK_OP) {
			status = AE_CTRL_BREAK;
		} else {
			status = AE_CTRL_CONTINUE;
		}
		break;

	default:

		ACPI_ERROR((AE_INFO, "Unknown control opcode=0x%X Op=%p",
			    op->common.aml_opcode, op));

		status = AE_AML_BAD_OPCODE;
		break;
	}

	return (status);
}