1. 根目录:
2. Documentation
3. devicetree
4. bindings
5. pwm
6. pwm-tiecap.txt

TI SOC ECAP based APWM controller

Required properties:
- compatible: Must be "ti,<soc>-ecap".
  for am33xx - compatible = "ti,am33xx-ecap";
  for da850  - compatible = "ti,da850-ecap", "ti,am33xx-ecap";
- #pwm-cells: should be 3. See pwm.txt in this directory for a description of
  the cells format. The PWM channel index ranges from 0 to 4. The only third
  cell flag supported by this binding is PWM_POLARITY_INVERTED.
- reg: physical base address and size of the registers map.

Optional properties:
- ti,hwmods: Name of the hwmod associated to the ECAP:
  "ecap<x>", <x> being the 0-based instance number from the HW spec

Example:

ecap0: ecap@0 { /* ECAP on am33xx */
	compatible = "ti,am33xx-ecap";
	#pwm-cells = <3>;
	reg = <0x48300100 0x80>;
	ti,hwmods = "ecap0";
};

ecap0: ecap@0 { /* ECAP on da850 */
	compatible = "ti,da850-ecap", "ti,am33xx-ecap";
	#pwm-cells = <3>;
	reg = <0x306000 0x80>;
};