1. 根目录:
2. Documentation
3. devicetree
4. bindings
5. clock
6. prima2-clock.txt

* Clock bindings for CSR SiRFprimaII

Required properties:
- compatible: Should be "sirf,prima2-clkc"
- reg: Address and length of the register set
- interrupts: Should contain clock controller interrupt
- #clock-cells: Should be <1>

The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell.  The following is a full list of prima2
clocks and IDs.

	Clock			ID
	---------------------------
	rtc			0
	osc             	1
	pll1            	2
	pll2            	3
	pll3            	4
	mem             	5
	sys             	6
	security        	7
	dsp             	8
	gps             	9
	mf              	10
	io              	11
	cpu             	12
	uart0           	13
	uart1           	14
	uart2           	15
	tsc             	16
	i2c0            	17
	i2c1            	18
	spi0            	19
	spi1            	20
	pwmc            	21
	efuse           	22
	pulse           	23
	dmac0           	24
	dmac1           	25
	nand            	26
	audio           	27
	usp0            	28
	usp1            	29
	usp2            	30
	vip             	31
	gfx             	32
	mm              	33
	lcd             	34
	vpp             	35
	mmc01           	36
	mmc23           	37
	mmc45           	38
	usbpll          	39
	usb0            	40
	usb1			41

Examples:

clks: clock-controller@88000000 {
	compatible = "sirf,prima2-clkc";
	reg = <0x88000000 0x1000>;
	interrupts = <3>;
	#clock-cells = <1>;
};

i2c0: i2c@b00e0000 {
	cell-index = <0>;
	compatible = "sirf,prima2-i2c";
	reg = <0xb00e0000 0x10000>;
	interrupts = <24>;
	clocks = <&clks 17>;
};