menuconfig SND_FIREWIRE
	bool "FireWire sound devices"
	depends on FIREWIRE
	default y
	help
	  Support for IEEE-1394/FireWire/iLink sound devices.

if SND_FIREWIRE && FIREWIRE

config SND_FIREWIRE_LIB
	tristate
	select SND_PCM
	select SND_RAWMIDI

config SND_DICE
	tristate "DICE-based DACs (EXPERIMENTAL)"
	select SND_HWDEP
	select SND_FIREWIRE_LIB
	help
	  Say Y here to include support for many DACs based on the DICE
	  chip family (DICE-II/Jr/Mini) from TC Applied Technologies.

	  At the moment, this driver supports playback only.  If you
	  want to use devices that support capturing, use FFADO instead.

	  To compile this driver as a module, choose M here: the module
	  will be called snd-dice.

config SND_FIREWIRE_SPEAKERS
	tristate "FireWire speakers"
	select SND_FIREWIRE_LIB
	help
	  Say Y here to include support for the Griffin FireWave Surround
	  and the LaCie FireWire Speakers.

	  To compile this driver as a module, choose M here: the module
	  will be called snd-firewire-speakers.

config SND_ISIGHT
	tristate "Apple iSight microphone"
	select SND_FIREWIRE_LIB
	help
	  Say Y here to include support for the front and rear microphones
	  of the Apple iSight web camera.

	  To compile this driver as a module, choose M here: the module
	  will be called snd-isight.

config SND_SCS1X
	tristate "Stanton Control System 1 MIDI"
	select SND_FIREWIRE_LIB
	help
	  Say Y here to include support for the MIDI ports of the Stanton
	  SCS.1d/SCS.1m DJ controllers.  (SCS.1m audio is still handled
	  by FFADO.)

	  To compile this driver as a module, choose M here: the module
	  will be called snd-scs1x.

config SND_FIREWORKS
	tristate "Echo Fireworks board module support"
	select SND_FIREWIRE_LIB
	select SND_HWDEP
	help
	  Say Y here to include support for FireWire devices based
	  on Echo Digital Audio Fireworks board:
	   * Mackie Onyx 400F/1200F
	   * Echo AudioFire12/8(until 2009 July)
	   * Echo AudioFire2/4/Pre8/8(since 2009 July)
	   * Echo Fireworks 8/HDMI
	   * Gibson Robot Interface Pack/GoldTop

	  To compile this driver as a module, choose M here: the module
	  will be called snd-fireworks.

config SND_BEBOB
	tristate "BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware"
	select SND_FIREWIRE_LIB
	select SND_HWDEP
        help
	 Say Y here to include support for FireWire devices based
	 on BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware:
	  * Edirol FA-66/FA-101
	  * PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
	  * BridgeCo RDAudio1/Audio5
	  * Mackie Onyx 1220/1620/1640 (FireWire I/O Card)
	  * Mackie d.2 (FireWire Option)
	  * Stanton FinalScratch 2 (ScratchAmp)
	  * Tascam IF-FW/DM
	  * Behringer XENIX UFX 1204/1604
	  * Behringer Digital Mixer X32 series (X-UF Card)
	  * Apogee Rosetta 200/400 (X-FireWire card)
	  * Apogee DA/AD/DD-16X (X-FireWire card)
	  * Apogee Ensemble
	  * ESI QuataFire 610
	  * AcousticReality eARMasterOne
	  * CME MatrixKFW
	  * Phonic Helix Board 12 MkII/18 MkII/24 MkII
	  * Phonic Helix Board 12 Universal/18 Universal/24 Universal
	  * Lynx Aurora 8/16 (LT-FW)
	  * ICON FireXon
	  * PrismSound Orpheus/ADA-8XR
	  * TerraTec PHASE 24 FW/PHASE X24 FW/PHASE 88 Rack FW
	  * TerraTec EWS MIC2/EWS MIC8
	  * TerraTec Aureon 7.1 FireWire
	  * Yamaha GO44/GO46
	  * Focusrite Saffire/Saffire LE/SaffirePro10 IO/SaffirePro26 IO
	  * M-Audio FireWire410/AudioPhile/Solo
	  * M-Audio Ozonic/NRV10/ProfireLightBridge
	  * M-Audio FireWire 1814/ProjectMix IO

          To compile this driver as a module, choose M here: the module
          will be called snd-bebob.

endif # SND_FIREWIRE