/* * TerraTec Cinergy T2/qanu USB2 DVB-T adapter. * * Copyright (C) 2007 Tomi Orava (tomimo@ncircle.nullnet.fi) * * Based on the dvb-usb-framework code and the * original Terratec Cinergy T2 driver by: * * Copyright (C) 2004 Daniel Mack <daniel@qanu.de> and * Holger Waechtler <holger@qanu.de> * * Protocol Spec published on http://qanu.de/specs/terratec_cinergyT2.pdf * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * */ #ifndef _DVB_USB_CINERGYT2_H_ #define _DVB_USB_CINERGYT2_H_ #include <linux/usb/input.h> #define DVB_USB_LOG_PREFIX "cinergyT2" #include "dvb-usb.h" #define DRIVER_NAME "TerraTec/qanu USB2.0 Highspeed DVB-T Receiver" extern int dvb_usb_cinergyt2_debug; #define deb_info(args...) dprintk(dvb_usb_cinergyt2_debug, 0x001, args) #define deb_xfer(args...) dprintk(dvb_usb_cinergyt2_debug, 0x002, args) #define deb_pll(args...) dprintk(dvb_usb_cinergyt2_debug, 0x004, args) #define deb_ts(args...) dprintk(dvb_usb_cinergyt2_debug, 0x008, args) #define deb_err(args...) dprintk(dvb_usb_cinergyt2_debug, 0x010, args) #define deb_rc(args...) dprintk(dvb_usb_cinergyt2_debug, 0x020, args) #define deb_fw(args...) dprintk(dvb_usb_cinergyt2_debug, 0x040, args) #define deb_mem(args...) dprintk(dvb_usb_cinergyt2_debug, 0x080, args) #define deb_uxfer(args...) dprintk(dvb_usb_cinergyt2_debug, 0x100, args) enum cinergyt2_ep1_cmd { CINERGYT2_EP1_PID_TABLE_RESET = 0x01, CINERGYT2_EP1_PID_SETUP = 0x02, CINERGYT2_EP1_CONTROL_STREAM_TRANSFER = 0x03, CINERGYT2_EP1_SET_TUNER_PARAMETERS = 0x04, CINERGYT2_EP1_GET_TUNER_STATUS = 0x05, CINERGYT2_EP1_START_SCAN = 0x06, CINERGYT2_EP1_CONTINUE_SCAN = 0x07, CINERGYT2_EP1_GET_RC_EVENTS = 0x08, CINERGYT2_EP1_SLEEP_MODE = 0x09, CINERGYT2_EP1_GET_FIRMWARE_VERSION = 0x0A }; struct dvbt_get_status_msg { uint32_t freq; uint8_t bandwidth; uint16_t tps; uint8_t flags; __le16 gain; uint8_t snr; __le32 viterbi_error_rate; uint32_t rs_error_rate; __le32 uncorrected_block_count; uint8_t lock_bits; uint8_t prev_lock_bits; } __attribute__((packed)); struct dvbt_set_parameters_msg { uint8_t cmd; __le32 freq; uint8_t bandwidth; __le16 tps; uint8_t flags; } __attribute__((packed)); extern struct dvb_frontend *cinergyt2_fe_attach(struct dvb_usb_device *d); #endif /* _DVB_USB_CINERGYT2_H_ */