#include <asm/processor.h> #include <asm/ppc_asm.h> #include <asm/reg.h> #include <asm/asm-offsets.h> #include <asm/cputable.h> #include <asm/thread_info.h> #include <asm/page.h> #include <asm/ptrace.h> #ifdef CONFIG_PPC_TRANSACTIONAL_MEM /* void do_load_up_transact_altivec(struct thread_struct *thread) * * This is similar to load_up_altivec but for the transactional version of the * vector regs. It doesn't mess with the task MSR or valid flags. * Furthermore, VEC laziness is not supported with TM currently. */ _GLOBAL(do_load_up_transact_altivec) mfmsr r6 oris r5,r6,MSR_VEC@h MTMSRD(r5) isync li r4,1 stw r4,THREAD_USED_VR(r3) li r10,THREAD_TRANSACT_VRSTATE+VRSTATE_VSCR lvx vr0,r10,r3 mtvscr vr0 addi r10,r3,THREAD_TRANSACT_VRSTATE REST_32VRS(0,r4,r10) /* Disable VEC again. */ MTMSRD(r6) isync blr #endif /* * Enable use of VMX/Altivec for the caller. */ _GLOBAL(vec_enable) mfmsr r3 oris r3,r3,MSR_VEC@h MTMSRD(r3) isync blr /* * Load state from memory into VMX registers including VSCR. * Assumes the caller has enabled VMX in the MSR. */ _GLOBAL(load_vr_state) li r4,VRSTATE_VSCR lvx vr0,r4,r3 mtvscr vr0 REST_32VRS(0,r4,r3) blr /* * Store VMX state into memory, including VSCR. * Assumes the caller has enabled VMX in the MSR. */ _GLOBAL(store_vr_state) SAVE_32VRS(0, r4, r3) mfvscr vr0 li r4, VRSTATE_VSCR stvx vr0, r4, r3 blr /* * Disable VMX for the task which had it previously, * and save its vector registers in its thread_struct. * Enables the VMX for use in the kernel on return. * On SMP we know the VMX is free, since we give it up every * switch (ie, no lazy save of the vector registers). * * Note that on 32-bit this can only use registers that will be * restored by fast_exception_return, i.e. r3 - r6, r10 and r11. */ _GLOBAL(load_up_altivec) mfmsr r5 /* grab the current MSR */ oris r5,r5,MSR_VEC@h MTMSRD(r5) /* enable use of AltiVec now */ isync /* * For SMP, we don't do lazy VMX switching because it just gets too * horrendously complex, especially when a task switches from one CPU * to another. Instead we call giveup_altvec in switch_to. * VRSAVE isn't dealt with here, that is done in the normal context * switch code. Note that we could rely on vrsave value to eventually * avoid saving all of the VREGs here... */ #ifndef CONFIG_SMP LOAD_REG_ADDRBASE(r3, last_task_used_altivec) toreal(r3) PPC_LL r4,ADDROFF(last_task_used_altivec)(r3) PPC_LCMPI 0,r4,0 beq 1f /* Save VMX state to last_task_used_altivec's THREAD struct */ toreal(r4) addi r4,r4,THREAD addi r6,r4,THREAD_VRSTATE SAVE_32VRS(0,r5,r6) mfvscr vr0 li r10,VRSTATE_VSCR stvx vr0,r10,r6 /* Disable VMX for last_task_used_altivec */ PPC_LL r5,PT_REGS(r4) toreal(r5) PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5) lis r10,MSR_VEC@h andc r4,r4,r10 PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) 1: #endif /* CONFIG_SMP */ /* Hack: if we get an altivec unavailable trap with VRSAVE * set to all zeros, we assume this is a broken application * that fails to set it properly, and thus we switch it to * all 1's */ mfspr r4,SPRN_VRSAVE cmpwi 0,r4,0 bne+ 1f li r4,-1 mtspr SPRN_VRSAVE,r4 1: /* enable use of VMX after return */ #ifdef CONFIG_PPC32 mfspr r5,SPRN_SPRG_THREAD /* current task's THREAD (phys) */ oris r9,r9,MSR_VEC@h #else ld r4,PACACURRENT(r13) addi r5,r4,THREAD /* Get THREAD */ oris r12,r12,MSR_VEC@h std r12,_MSR(r1) #endif addi r6,r5,THREAD_VRSTATE li r4,1 li r10,VRSTATE_VSCR stw r4,THREAD_USED_VR(r5) lvx vr0,r10,r6 mtvscr vr0 REST_32VRS(0,r4,r6) #ifndef CONFIG_SMP /* Update last_task_used_altivec to 'current' */ subi r4,r5,THREAD /* Back to 'current' */ fromreal(r4) PPC_STL r4,ADDROFF(last_task_used_altivec)(r3) #endif /* CONFIG_SMP */ /* restore registers and return */ blr _GLOBAL(giveup_altivec_notask) mfmsr r3 andis. r4,r3,MSR_VEC@h bnelr /* Already enabled? */ oris r3,r3,MSR_VEC@h SYNC MTMSRD(r3) /* enable use of VMX now */ isync blr /* * giveup_altivec(tsk) * Disable VMX for the task given as the argument, * and save the vector registers in its thread_struct. * Enables the VMX for use in the kernel on return. */ _GLOBAL(giveup_altivec) mfmsr r5 oris r5,r5,MSR_VEC@h SYNC MTMSRD(r5) /* enable use of VMX now */ isync PPC_LCMPI 0,r3,0 beqlr /* if no previous owner, done */ addi r3,r3,THREAD /* want THREAD of task */ PPC_LL r7,THREAD_VRSAVEAREA(r3) PPC_LL r5,PT_REGS(r3) PPC_LCMPI 0,r7,0 bne 2f addi r7,r3,THREAD_VRSTATE 2: PPC_LCMPI 0,r5,0 SAVE_32VRS(0,r4,r7) mfvscr vr0 li r4,VRSTATE_VSCR stvx vr0,r4,r7 beq 1f PPC_LL r4,_MSR-STACK_FRAME_OVERHEAD(r5) #ifdef CONFIG_VSX BEGIN_FTR_SECTION lis r3,(MSR_VEC|MSR_VSX)@h FTR_SECTION_ELSE lis r3,MSR_VEC@h ALT_FTR_SECTION_END_IFSET(CPU_FTR_VSX) #else lis r3,MSR_VEC@h #endif andc r4,r4,r3 /* disable FP for previous task */ PPC_STL r4,_MSR-STACK_FRAME_OVERHEAD(r5) 1: #ifndef CONFIG_SMP li r5,0 LOAD_REG_ADDRBASE(r4,last_task_used_altivec) PPC_STL r5,ADDROFF(last_task_used_altivec)(r4) #endif /* CONFIG_SMP */ blr #ifdef CONFIG_VSX #ifdef CONFIG_PPC32 #error This asm code isn't ready for 32-bit kernels #endif /* * load_up_vsx(unused, unused, tsk) * Disable VSX for the task which had it previously, * and save its vector registers in its thread_struct. * Reuse the fp and vsx saves, but first check to see if they have * been saved already. */ _GLOBAL(load_up_vsx) /* Load FP and VSX registers if they haven't been done yet */ andi. r5,r12,MSR_FP beql+ load_up_fpu /* skip if already loaded */ andis. r5,r12,MSR_VEC@h beql+ load_up_altivec /* skip if already loaded */ #ifndef CONFIG_SMP ld r3,last_task_used_vsx@got(r2) ld r4,0(r3) cmpdi 0,r4,0 beq 1f /* Disable VSX for last_task_used_vsx */ addi r4,r4,THREAD ld r5,PT_REGS(r4) ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) lis r6,MSR_VSX@h andc r6,r4,r6 std r6,_MSR-STACK_FRAME_OVERHEAD(r5) 1: #endif /* CONFIG_SMP */ ld r4,PACACURRENT(r13) addi r4,r4,THREAD /* Get THREAD */ li r6,1 stw r6,THREAD_USED_VSR(r4) /* ... also set thread used vsr */ /* enable use of VSX after return */ oris r12,r12,MSR_VSX@h std r12,_MSR(r1) #ifndef CONFIG_SMP /* Update last_task_used_vsx to 'current' */ ld r4,PACACURRENT(r13) std r4,0(r3) #endif /* CONFIG_SMP */ b fast_exception_return /* * __giveup_vsx(tsk) * Disable VSX for the task given as the argument. * Does NOT save vsx registers. * Enables the VSX for use in the kernel on return. */ _GLOBAL(__giveup_vsx) mfmsr r5 oris r5,r5,MSR_VSX@h mtmsrd r5 /* enable use of VSX now */ isync cmpdi 0,r3,0 beqlr- /* if no previous owner, done */ addi r3,r3,THREAD /* want THREAD of task */ ld r5,PT_REGS(r3) cmpdi 0,r5,0 beq 1f ld r4,_MSR-STACK_FRAME_OVERHEAD(r5) lis r3,MSR_VSX@h andc r4,r4,r3 /* disable VSX for previous task */ std r4,_MSR-STACK_FRAME_OVERHEAD(r5) 1: #ifndef CONFIG_SMP li r5,0 ld r4,last_task_used_vsx@got(r2) std r5,0(r4) #endif /* CONFIG_SMP */ blr #endif /* CONFIG_VSX */ /* * The routines below are in assembler so we can closely control the * usage of floating-point registers. These routines must be called * with preempt disabled. */ #ifdef CONFIG_PPC32 .data fpzero: .long 0 fpone: .long 0x3f800000 /* 1.0 in single-precision FP */ fphalf: .long 0x3f000000 /* 0.5 in single-precision FP */ #define LDCONST(fr, name) \ lis r11,name@ha; \ lfs fr,name@l(r11) #else .section ".toc","aw" fpzero: .tc FD_0_0[TC],0 fpone: .tc FD_3ff00000_0[TC],0x3ff0000000000000 /* 1.0 */ fphalf: .tc FD_3fe00000_0[TC],0x3fe0000000000000 /* 0.5 */ #define LDCONST(fr, name) \ lfd fr,name@toc(r2) #endif .text /* * Internal routine to enable floating point and set FPSCR to 0. * Don't call it from C; it doesn't use the normal calling convention. */ fpenable: #ifdef CONFIG_PPC32 stwu r1,-64(r1) #else stdu r1,-64(r1) #endif mfmsr r10 ori r11,r10,MSR_FP mtmsr r11 isync stfd fr0,24(r1) stfd fr1,16(r1) stfd fr31,8(r1) LDCONST(fr1, fpzero) mffs fr31 MTFSF_L(fr1) blr fpdisable: mtlr r12 MTFSF_L(fr31) lfd fr31,8(r1) lfd fr1,16(r1) lfd fr0,24(r1) mtmsr r10 isync addi r1,r1,64 blr /* * Vector add, floating point. */ _GLOBAL(vaddfp) mflr r12 bl fpenable li r0,4 mtctr r0 li r6,0 1: lfsx fr0,r4,r6 lfsx fr1,r5,r6 fadds fr0,fr0,fr1 stfsx fr0,r3,r6 addi r6,r6,4 bdnz 1b b fpdisable /* * Vector subtract, floating point. */ _GLOBAL(vsubfp) mflr r12 bl fpenable li r0,4 mtctr r0 li r6,0 1: lfsx fr0,r4,r6 lfsx fr1,r5,r6 fsubs fr0,fr0,fr1 stfsx fr0,r3,r6 addi r6,r6,4 bdnz 1b b fpdisable /* * Vector multiply and add, floating point. */ _GLOBAL(vmaddfp) mflr r12 bl fpenable stfd fr2,32(r1) li r0,4 mtctr r0 li r7,0 1: lfsx fr0,r4,r7 lfsx fr1,r5,r7 lfsx fr2,r6,r7 fmadds fr0,fr0,fr2,fr1 stfsx fr0,r3,r7 addi r7,r7,4 bdnz 1b lfd fr2,32(r1) b fpdisable /* * Vector negative multiply and subtract, floating point. */ _GLOBAL(vnmsubfp) mflr r12 bl fpenable stfd fr2,32(r1) li r0,4 mtctr r0 li r7,0 1: lfsx fr0,r4,r7 lfsx fr1,r5,r7 lfsx fr2,r6,r7 fnmsubs fr0,fr0,fr2,fr1 stfsx fr0,r3,r7 addi r7,r7,4 bdnz 1b lfd fr2,32(r1) b fpdisable /* * Vector reciprocal estimate. We just compute 1.0/x. * r3 -> destination, r4 -> source. */ _GLOBAL(vrefp) mflr r12 bl fpenable li r0,4 LDCONST(fr1, fpone) mtctr r0 li r6,0 1: lfsx fr0,r4,r6 fdivs fr0,fr1,fr0 stfsx fr0,r3,r6 addi r6,r6,4 bdnz 1b b fpdisable /* * Vector reciprocal square-root estimate, floating point. * We use the frsqrte instruction for the initial estimate followed * by 2 iterations of Newton-Raphson to get sufficient accuracy. * r3 -> destination, r4 -> source. */ _GLOBAL(vrsqrtefp) mflr r12 bl fpenable stfd fr2,32(r1) stfd fr3,40(r1) stfd fr4,48(r1) stfd fr5,56(r1) li r0,4 LDCONST(fr4, fpone) LDCONST(fr5, fphalf) mtctr r0 li r6,0 1: lfsx fr0,r4,r6 frsqrte fr1,fr0 /* r = frsqrte(s) */ fmuls fr3,fr1,fr0 /* r * s */ fmuls fr2,fr1,fr5 /* r * 0.5 */ fnmsubs fr3,fr1,fr3,fr4 /* 1 - s * r * r */ fmadds fr1,fr2,fr3,fr1 /* r = r + 0.5 * r * (1 - s * r * r) */ fmuls fr3,fr1,fr0 /* r * s */ fmuls fr2,fr1,fr5 /* r * 0.5 */ fnmsubs fr3,fr1,fr3,fr4 /* 1 - s * r * r */ fmadds fr1,fr2,fr3,fr1 /* r = r + 0.5 * r * (1 - s * r * r) */ stfsx fr1,r3,r6 addi r6,r6,4 bdnz 1b lfd fr5,56(r1) lfd fr4,48(r1) lfd fr3,40(r1) lfd fr2,32(r1) b fpdisable