Kernel  |  3.14

下载     查看原文件
C++程序  |  331行  |  10 KB
/*
 * SBE 2T3E3 synchronous serial card driver for Linux
 *
 * Copyright (C) 2009-2010 Krzysztof Halasa <khc@pm.waw.pl>
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of version 2 of the GNU General Public License
 * as published by the Free Software Foundation.
 *
 * This code is based on a driver written by SBE Inc.
 */

#include <linux/ip.h>
#include "2t3e3.h"
#include "ctrl.h"

/* All access to registers done via the 21143 on port 0 must be
 * protected via the card->bootrom_lock. */

/* private define to be used here only - must be protected by card->bootrom_lock */
#define cpld_write_nolock(channel, reg, val)			\
	bootrom_write((channel), CPLD_MAP_REG(reg, channel), val)

u32 cpld_read(struct channel *channel, u32 reg)
{
	unsigned long flags;
	u32 val;

	spin_lock_irqsave(&channel->card->bootrom_lock, flags);
	val = bootrom_read((channel), CPLD_MAP_REG(reg, channel));
	spin_unlock_irqrestore(&channel->card->bootrom_lock, flags);
	return val;
}

/****************************************
 * Access via BootROM port
 ****************************************/

u32 bootrom_read(struct channel *channel, u32 reg)
{
	unsigned long addr = channel->card->bootrom_addr;
	u32 result;

	/* select BootROM address */
	dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_PROGRAMMING_ADDRESS, reg & 0x3FFFF);

	/* select reading from BootROM */
	dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
		 SBE_2T3E3_21143_VAL_READ_OPERATION |
		 SBE_2T3E3_21143_VAL_BOOT_ROM_SELECT);

	udelay(2); /* 20 PCI cycles */

	/* read from BootROM */
	result = dc_read(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT) & 0xff;

	/* reset CSR9 */
	dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, 0);

	return result;
}

void bootrom_write(struct channel *channel, u32 reg, u32 val)
{
	unsigned long addr = channel->card->bootrom_addr;

	/* select BootROM address */
	dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_PROGRAMMING_ADDRESS, reg & 0x3FFFF);

	/* select writting to BootROM */
	dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
		 SBE_2T3E3_21143_VAL_WRITE_OPERATION |
		 SBE_2T3E3_21143_VAL_BOOT_ROM_SELECT |
		 (val & 0xff));

	udelay(2); /* 20 PCI cycles */

	/* reset CSR9 */
	dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, 0);
}


/****************************************
 * Access via Serial I/O port
 ****************************************/

static u32 serialrom_read_bit(struct channel *channel)
{
	unsigned long addr = channel->card->bootrom_addr;
	u32 bit;

	dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
		 SBE_2T3E3_21143_VAL_READ_OPERATION |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_CLOCK |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT);	/* clock high */

	bit = (dc_read(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT) &
	       SBE_2T3E3_21143_VAL_SERIAL_ROM_DATA_OUT) > 0 ? 1 : 0;

	dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
		 SBE_2T3E3_21143_VAL_READ_OPERATION |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT);	/* clock low */

	return bit;
}

static void serialrom_write_bit(struct channel *channel, u32 bit)
{
	unsigned long addr = channel->card->bootrom_addr;
	u32 lastbit = -1;

	bit &= 1;

	if (bit != lastbit) {
		dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
			 SBE_2T3E3_21143_VAL_WRITE_OPERATION |
			 SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
			 SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT |
			 (bit << 2)); /* clock low */

		lastbit = bit;
	}

	dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
		 SBE_2T3E3_21143_VAL_WRITE_OPERATION |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_CLOCK |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT |
		 (bit << 2)); /* clock high */

	dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
		 SBE_2T3E3_21143_VAL_WRITE_OPERATION |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT |
		 (bit << 2)); /* clock low */
}

/****************************************
 * Access to SerialROM (eeprom)
 ****************************************/

u32 t3e3_eeprom_read_word(struct channel *channel, u32 address)
{
	unsigned long addr = channel->card->bootrom_addr;
	u32 i, val;
	unsigned long flags;

	address &= 0x3f;

	spin_lock_irqsave(&channel->card->bootrom_lock, flags);

	/* select correct Serial Chip */
	cpld_write_nolock(channel, SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT,
			  SBE_2T3E3_CPLD_VAL_EEPROM_SELECT);

	/* select reading from Serial I/O Bus */
	dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
		 SBE_2T3E3_21143_VAL_READ_OPERATION |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT);        /* clock low */

	/* select read operation */
	serialrom_write_bit(channel, 0);
	serialrom_write_bit(channel, 1);
	serialrom_write_bit(channel, 1);
	serialrom_write_bit(channel, 0);

	for (i = 0x20; i; i >>= 1)
		serialrom_write_bit(channel, address & i ? 1 : 0);

	val = 0;
	for (i = 0x8000; i; i >>= 1)
		val |= (serialrom_read_bit(channel) ? i : 0);

	/* Reset 21143's CSR9 */
	dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
		 SBE_2T3E3_21143_VAL_READ_OPERATION |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT);        /* clock low */
	dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, 0);

	/* Unselect Serial Chip */
	cpld_write_nolock(channel, SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT, 0);

	spin_unlock_irqrestore(&channel->card->bootrom_lock, flags);

	return ntohs(val);
}


/****************************************
 * Access to Framer
 ****************************************/

u32 exar7250_read(struct channel *channel, u32 reg)
{
	u32 result;
	unsigned long flags;

	spin_lock_irqsave(&channel->card->bootrom_lock, flags);

	result = bootrom_read(channel, cpld_reg_map[SBE_2T3E3_CPLD_REG_FRAMER_BASE_ADDRESS]
			      [channel->h.slot] + (t3e3_framer_reg_map[reg] << 2));

	spin_unlock_irqrestore(&channel->card->bootrom_lock, flags);

	return result;
}

void exar7250_write(struct channel *channel, u32 reg, u32 val)
{
	unsigned long flags;

	val &= 0xff;
	channel->framer_regs[reg] = val;

	spin_lock_irqsave(&channel->card->bootrom_lock, flags);

	bootrom_write(channel, cpld_reg_map[SBE_2T3E3_CPLD_REG_FRAMER_BASE_ADDRESS]
		      [channel->h.slot] + (t3e3_framer_reg_map[reg] << 2), val);

	spin_unlock_irqrestore(&channel->card->bootrom_lock, flags);
}


/****************************************
 * Access to LIU
 ****************************************/

u32 exar7300_read(struct channel *channel, u32 reg)
{
	unsigned long addr = channel->card->bootrom_addr, flags;
	u32 i, val;

	/* select correct Serial Chip */

	spin_lock_irqsave(&channel->card->bootrom_lock, flags);

	cpld_write_nolock(channel, SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT,
			  cpld_val_map[SBE_2T3E3_CPLD_VAL_LIU_SELECT][channel->h.slot]);

	/* select reading from Serial I/O Bus */
	dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
		 SBE_2T3E3_21143_VAL_READ_OPERATION |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT);	/* clock low */

	/* select read operation */
	serialrom_write_bit(channel, 1);

	/* Exar7300 register address is 4 bit long */
	reg = t3e3_liu_reg_map[reg];
	for (i = 0; i < 4; i++, reg >>= 1) /* 4 bits of SerialROM address */
		serialrom_write_bit(channel, reg & 1);
	for (i = 0; i < 3; i++)	/* remaining 3 bits of SerialROM address */
		serialrom_write_bit(channel, 0);

	val = 0; /* Exar7300 register value is 5 bit long */
	for (i = 0; i < 8; i++)	/* 8 bits of SerialROM value */
		val += (serialrom_read_bit(channel) << i);

	/* Reset 21143's CSR9 */
	dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
		 SBE_2T3E3_21143_VAL_READ_OPERATION |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT);	/* clock low */
	dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, 0);

	/* Unselect Serial Chip */
	cpld_write_nolock(channel, SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT, 0);

	spin_unlock_irqrestore(&channel->card->bootrom_lock, flags);

	return val;
}

void exar7300_write(struct channel *channel, u32 reg, u32 val)
{
	unsigned long addr = channel->card->bootrom_addr, flags;
	u32 i;

	channel->liu_regs[reg] = val;

	/* select correct Serial Chip */

	spin_lock_irqsave(&channel->card->bootrom_lock, flags);

	cpld_write_nolock(channel, SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT,
			  cpld_val_map[SBE_2T3E3_CPLD_VAL_LIU_SELECT][channel->h.slot]);

	/* select writting to Serial I/O Bus */
	dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
		 SBE_2T3E3_21143_VAL_WRITE_OPERATION |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT);	/* clock low */

	/* select write operation */
	serialrom_write_bit(channel, 0);

	/* Exar7300 register address is 4 bit long */
	reg = t3e3_liu_reg_map[reg];
	for (i = 0; i < 4; i++) {	/* 4 bits */
		serialrom_write_bit(channel, reg & 1);
		reg >>= 1;
	}
	for (i = 0; i < 3; i++)	/* remaining 3 bits of SerialROM address */
		serialrom_write_bit(channel, 0);

	/* Exar7300 register value is 5 bit long */
	for (i = 0; i < 5; i++) {
		serialrom_write_bit(channel, val & 1);
		val >>= 1;
	}
	for (i = 0; i < 3; i++)	/* remaining 3 bits of SerialROM value */
		serialrom_write_bit(channel, 0);

	/* Reset 21143_CSR9 */
	dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT,
		 SBE_2T3E3_21143_VAL_WRITE_OPERATION |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_SELECT |
		 SBE_2T3E3_21143_VAL_SERIAL_ROM_CHIP_SELECT);	/* clock low */
	dc_write(addr, SBE_2T3E3_21143_REG_BOOT_ROM_SERIAL_ROM_AND_MII_MANAGEMENT, 0);

	/* Unselect Serial Chip */
	cpld_write_nolock(channel, SBE_2T3E3_CPLD_REG_SERIAL_CHIP_SELECT, 0);

	spin_unlock_irqrestore(&channel->card->bootrom_lock, flags);
}