- 根目录:
- arch
- mips
- oprofile
- op_model_mipsxx.c
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2004, 05, 06 by Ralf Baechle
* Copyright (C) 2005 by MIPS Technologies, Inc.
*/
#include <linux/cpumask.h>
#include <linux/oprofile.h>
#include <linux/interrupt.h>
#include <linux/smp.h>
#include <asm/irq_regs.h>
#include "op_impl.h"
#define M_PERFCTL_EXL (1UL << 0)
#define M_PERFCTL_KERNEL (1UL << 1)
#define M_PERFCTL_SUPERVISOR (1UL << 2)
#define M_PERFCTL_USER (1UL << 3)
#define M_PERFCTL_INTERRUPT_ENABLE (1UL << 4)
#define M_PERFCTL_EVENT(event) (((event) & 0x3ff) << 5)
#define M_PERFCTL_VPEID(vpe) ((vpe) << 16)
#define M_PERFCTL_MT_EN(filter) ((filter) << 20)
#define M_TC_EN_ALL M_PERFCTL_MT_EN(0)
#define M_TC_EN_VPE M_PERFCTL_MT_EN(1)
#define M_TC_EN_TC M_PERFCTL_MT_EN(2)
#define M_PERFCTL_TCID(tcid) ((tcid) << 22)
#define M_PERFCTL_WIDE (1UL << 30)
#define M_PERFCTL_MORE (1UL << 31)
#define M_COUNTER_OVERFLOW (1UL << 31)
/* Netlogic XLR specific, count events in all threads in a core */
#define M_PERFCTL_COUNT_ALL_THREADS (1UL << 13)
static int (*save_perf_irq)(void);
/*
* XLR has only one set of counters per core. Designate the
* first hardware thread in the core for setup and init.
* Skip CPUs with non-zero hardware thread id (4 hwt per core)
*/
#if defined(CONFIG_CPU_XLR) && defined(CONFIG_SMP)
#define oprofile_skip_cpu(c) ((cpu_logical_map(c) & 0x3) != 0)
#else
#define oprofile_skip_cpu(c) 0
#endif
#ifdef CONFIG_MIPS_MT_SMP
static int cpu_has_mipsmt_pertccounters;
#define WHAT (M_TC_EN_VPE | \
M_PERFCTL_VPEID(cpu_data[smp_processor_id()].vpe_id))
#define vpe_id() (cpu_has_mipsmt_pertccounters ? \
0 : cpu_data[smp_processor_id()].vpe_id)
/*
* The number of bits to shift to convert between counters per core and
* counters per VPE. There is no reasonable interface atm to obtain the
* number of VPEs used by Linux and in the 34K this number is fixed to two
* anyways so we hardcore a few things here for the moment. The way it's
* done here will ensure that oprofile VSMP kernel will run right on a lesser
* core like a 24K also or with maxcpus=1.
*/
static inline unsigned int vpe_shift(void)
{
if (num_possible_cpus() > 1)
return 1;
return 0;
}
#else
#define WHAT 0
#define vpe_id() 0
static inline unsigned int vpe_shift(void)
{
return 0;
}
#endif
static inline unsigned int counters_total_to_per_cpu(unsigned int counters)
{
return counters >> vpe_shift();
}
static inline unsigned int counters_per_cpu_to_total(unsigned int counters)
{
return counters << vpe_shift();
}
#define __define_perf_accessors(r, n, np) \
\
static inline unsigned int r_c0_ ## r ## n(void) \
{ \
unsigned int cpu = vpe_id(); \
\
switch (cpu) { \
case 0: \
return read_c0_ ## r ## n(); \
case 1: \
return read_c0_ ## r ## np(); \
default: \
BUG(); \
} \
return 0; \
} \
\
static inline void w_c0_ ## r ## n(unsigned int value) \
{ \
unsigned int cpu = vpe_id(); \
\
switch (cpu) { \
case 0: \
write_c0_ ## r ## n(value); \
return; \
case 1: \
write_c0_ ## r ## np(value); \
return; \
default: \
BUG(); \
} \
return; \
} \
__define_perf_accessors(perfcntr, 0, 2)
__define_perf_accessors(perfcntr, 1, 3)
__define_perf_accessors(perfcntr, 2, 0)
__define_perf_accessors(perfcntr, 3, 1)
__define_perf_accessors(perfctrl, 0, 2)
__define_perf_accessors(perfctrl, 1, 3)
__define_perf_accessors(perfctrl, 2, 0)
__define_perf_accessors(perfctrl, 3, 1)
struct op_mips_model op_model_mipsxx_ops;
static struct mipsxx_register_config {
unsigned int control[4];
unsigned int counter[4];
} reg;
/* Compute all of the registers in preparation for enabling profiling. */
static void mipsxx_reg_setup(struct op_counter_config *ctr)
{
unsigned int counters = op_model_mipsxx_ops.num_counters;
int i;
/* Compute the performance counter control word. */
for (i = 0; i < counters; i++) {
reg.control[i] = 0;
reg.counter[i] = 0;
if (!ctr[i].enabled)
continue;
reg.control[i] = M_PERFCTL_EVENT(ctr[i].event) |
M_PERFCTL_INTERRUPT_ENABLE;
if (ctr[i].kernel)
reg.control[i] |= M_PERFCTL_KERNEL;
if (ctr[i].user)
reg.control[i] |= M_PERFCTL_USER;
if (ctr[i].exl)
reg.control[i] |= M_PERFCTL_EXL;
if (boot_cpu_type() == CPU_XLR)
reg.control[i] |= M_PERFCTL_COUNT_ALL_THREADS;
reg.counter[i] = 0x80000000 - ctr[i].count;
}
}
/* Program all of the registers in preparation for enabling profiling. */
static void mipsxx_cpu_setup(void *args)
{
unsigned int counters = op_model_mipsxx_ops.num_counters;
if (oprofile_skip_cpu(smp_processor_id()))
return;
switch (counters) {
case 4:
w_c0_perfctrl3(0);
w_c0_perfcntr3(reg.counter[3]);
case 3:
w_c0_perfctrl2(0);
w_c0_perfcntr2(reg.counter[2]);
case 2:
w_c0_perfctrl1(0);
w_c0_perfcntr1(reg.counter[1]);
case 1:
w_c0_perfctrl0(0);
w_c0_perfcntr0(reg.counter[0]);
}
}
/* Start all counters on current CPU */
static void mipsxx_cpu_start(void *args)
{
unsigned int counters = op_model_mipsxx_ops.num_counters;
if (oprofile_skip_cpu(smp_processor_id()))
return;
switch (counters) {
case 4:
w_c0_perfctrl3(WHAT | reg.control[3]);
case 3:
w_c0_perfctrl2(WHAT | reg.control[2]);
case 2:
w_c0_perfctrl1(WHAT | reg.control[1]);
case 1:
w_c0_perfctrl0(WHAT | reg.control[0]);
}
}
/* Stop all counters on current CPU */
static void mipsxx_cpu_stop(void *args)
{
unsigned int counters = op_model_mipsxx_ops.num_counters;
if (oprofile_skip_cpu(smp_processor_id()))
return;
switch (counters) {
case 4:
w_c0_perfctrl3(0);
case 3:
w_c0_perfctrl2(0);
case 2:
w_c0_perfctrl1(0);
case 1:
w_c0_perfctrl0(0);
}
}
static int mipsxx_perfcount_handler(void)
{
unsigned int counters = op_model_mipsxx_ops.num_counters;
unsigned int control;
unsigned int counter;
int handled = IRQ_NONE;
if (cpu_has_mips_r2 && !(read_c0_cause() & (1 << 26)))
return handled;
switch (counters) {
#define HANDLE_COUNTER(n) \
case n + 1: \
control = r_c0_perfctrl ## n(); \
counter = r_c0_perfcntr ## n(); \
if ((control & M_PERFCTL_INTERRUPT_ENABLE) && \
(counter & M_COUNTER_OVERFLOW)) { \
oprofile_add_sample(get_irq_regs(), n); \
w_c0_perfcntr ## n(reg.counter[n]); \
handled = IRQ_HANDLED; \
}
HANDLE_COUNTER(3)
HANDLE_COUNTER(2)
HANDLE_COUNTER(1)
HANDLE_COUNTER(0)
}
return handled;
}
#define M_CONFIG1_PC (1 << 4)
static inline int __n_counters(void)
{
if (!(read_c0_config1() & M_CONFIG1_PC))
return 0;
if (!(read_c0_perfctrl0() & M_PERFCTL_MORE))
return 1;
if (!(read_c0_perfctrl1() & M_PERFCTL_MORE))
return 2;
if (!(read_c0_perfctrl2() & M_PERFCTL_MORE))
return 3;
return 4;
}
static inline int n_counters(void)
{
int counters;
switch (current_cpu_type()) {
case CPU_R10000:
counters = 2;
break;
case CPU_R12000:
case CPU_R14000:
counters = 4;
break;
default:
counters = __n_counters();
}
return counters;
}
static void reset_counters(void *arg)
{
int counters = (int)(long)arg;
switch (counters) {
case 4:
w_c0_perfctrl3(0);
w_c0_perfcntr3(0);
case 3:
w_c0_perfctrl2(0);
w_c0_perfcntr2(0);
case 2:
w_c0_perfctrl1(0);
w_c0_perfcntr1(0);
case 1:
w_c0_perfctrl0(0);
w_c0_perfcntr0(0);
}
}
static irqreturn_t mipsxx_perfcount_int(int irq, void *dev_id)
{
return mipsxx_perfcount_handler();
}
static int __init mipsxx_init(void)
{
int counters;
counters = n_counters();
if (counters == 0) {
printk(KERN_ERR "Oprofile: CPU has no performance counters\n");
return -ENODEV;
}
#ifdef CONFIG_MIPS_MT_SMP
cpu_has_mipsmt_pertccounters = read_c0_config7() & (1<<19);
if (!cpu_has_mipsmt_pertccounters)
counters = counters_total_to_per_cpu(counters);
#endif
on_each_cpu(reset_counters, (void *)(long)counters, 1);
op_model_mipsxx_ops.num_counters = counters;
switch (current_cpu_type()) {
case CPU_M14KC:
op_model_mipsxx_ops.cpu_type = "mips/M14Kc";
break;
case CPU_M14KEC:
op_model_mipsxx_ops.cpu_type = "mips/M14KEc";
break;
case CPU_20KC:
op_model_mipsxx_ops.cpu_type = "mips/20K";
break;
case CPU_24K:
op_model_mipsxx_ops.cpu_type = "mips/24K";
break;
case CPU_25KF:
op_model_mipsxx_ops.cpu_type = "mips/25K";
break;
case CPU_1004K:
case CPU_34K:
op_model_mipsxx_ops.cpu_type = "mips/34K";
break;
case CPU_74K:
op_model_mipsxx_ops.cpu_type = "mips/74K";
break;
case CPU_INTERAPTIV:
op_model_mipsxx_ops.cpu_type = "mips/interAptiv";
break;
case CPU_PROAPTIV:
op_model_mipsxx_ops.cpu_type = "mips/proAptiv";
break;
case CPU_5KC:
op_model_mipsxx_ops.cpu_type = "mips/5K";
break;
case CPU_R10000:
if ((current_cpu_data.processor_id & 0xff) == 0x20)
op_model_mipsxx_ops.cpu_type = "mips/r10000-v2.x";
else
op_model_mipsxx_ops.cpu_type = "mips/r10000";
break;
case CPU_R12000:
case CPU_R14000:
op_model_mipsxx_ops.cpu_type = "mips/r12000";
break;
case CPU_SB1:
case CPU_SB1A:
op_model_mipsxx_ops.cpu_type = "mips/sb1";
break;
case CPU_LOONGSON1:
op_model_mipsxx_ops.cpu_type = "mips/loongson1";
break;
case CPU_XLR:
op_model_mipsxx_ops.cpu_type = "mips/xlr";
break;
default:
printk(KERN_ERR "Profiling unsupported for this CPU\n");
return -ENODEV;
}
save_perf_irq = perf_irq;
perf_irq = mipsxx_perfcount_handler;
if ((cp0_perfcount_irq >= 0) && (cp0_compare_irq != cp0_perfcount_irq))
return request_irq(cp0_perfcount_irq, mipsxx_perfcount_int,
0, "Perfcounter", save_perf_irq);
return 0;
}
static void mipsxx_exit(void)
{
int counters = op_model_mipsxx_ops.num_counters;
if ((cp0_perfcount_irq >= 0) && (cp0_compare_irq != cp0_perfcount_irq))
free_irq(cp0_perfcount_irq, save_perf_irq);
counters = counters_per_cpu_to_total(counters);
on_each_cpu(reset_counters, (void *)(long)counters, 1);
perf_irq = save_perf_irq;
}
struct op_mips_model op_model_mipsxx_ops = {
.reg_setup = mipsxx_reg_setup,
.cpu_setup = mipsxx_cpu_setup,
.init = mipsxx_init,
.exit = mipsxx_exit,
.cpu_start = mipsxx_cpu_start,
.cpu_stop = mipsxx_cpu_stop,
};