/* * Driver for Digigram miXart soundcards * * definitions and makros for basic card access * * Copyright (c) 2003 by Digigram <alsa@digigram.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef __SOUND_MIXART_HWDEP_H #define __SOUND_MIXART_HWDEP_H #include <sound/hwdep.h> #ifndef readl_be #define readl_be(x) be32_to_cpu(__raw_readl(x)) #endif #ifndef writel_be #define writel_be(data,addr) __raw_writel(cpu_to_be32(data),addr) #endif #ifndef readl_le #define readl_le(x) le32_to_cpu(__raw_readl(x)) #endif #ifndef writel_le #define writel_le(data,addr) __raw_writel(cpu_to_le32(data),addr) #endif #define MIXART_MEM(mgr,x) ((mgr)->mem[0].virt + (x)) #define MIXART_REG(mgr,x) ((mgr)->mem[1].virt + (x)) /* Daughter board Type */ #define DAUGHTER_TYPE_MASK 0x0F #define DAUGHTER_VER_MASK 0xF0 #define DAUGHTER_TYPEVER_MASK (DAUGHTER_TYPE_MASK|DAUGHTER_VER_MASK) #define MIXART_DAUGHTER_TYPE_NONE 0x00 #define MIXART_DAUGHTER_TYPE_COBRANET 0x08 #define MIXART_DAUGHTER_TYPE_AES 0x0E #define MIXART_BA0_SIZE (16 * 1024 * 1024) /* 16M */ #define MIXART_BA1_SIZE (4 * 1024) /* 4k */ /* * -----------BAR 0 -------------------------------------------------------------------------------------------------------- */ #define MIXART_PSEUDOREG 0x2000 /* base address for pseudoregister */ #define MIXART_PSEUDOREG_BOARDNUMBER MIXART_PSEUDOREG+0 /* board number */ /* perfmeter (available when elf loaded)*/ #define MIXART_PSEUDOREG_PERF_STREAM_LOAD_OFFSET MIXART_PSEUDOREG+0x70 /* streaming load */ #define MIXART_PSEUDOREG_PERF_SYSTEM_LOAD_OFFSET MIXART_PSEUDOREG+0x78 /* system load (reference)*/ #define MIXART_PSEUDOREG_PERF_MAILBX_LOAD_OFFSET MIXART_PSEUDOREG+0x7C /* mailbox load */ #define MIXART_PSEUDOREG_PERF_INTERR_LOAD_OFFSET MIXART_PSEUDOREG+0x74 /* interrupt handling load */ /* motherboard xilinx loader info */ #define MIXART_PSEUDOREG_MXLX_BASE_ADDR_OFFSET MIXART_PSEUDOREG+0x9C /* 0x00600000 */ #define MIXART_PSEUDOREG_MXLX_SIZE_OFFSET MIXART_PSEUDOREG+0xA0 /* xilinx size in bytes */ #define MIXART_PSEUDOREG_MXLX_STATUS_OFFSET MIXART_PSEUDOREG+0xA4 /* status = EMBEBBED_STAT_XXX */ /* elf loader info */ #define MIXART_PSEUDOREG_ELF_STATUS_OFFSET MIXART_PSEUDOREG+0xB0 /* status = EMBEBBED_STAT_XXX */ /* * after the elf code is loaded, and the flowtable info was passed to it, * the driver polls on this address, until it shows 1 (presence) or 2 (absence) * once it is non-zero, the daughter board type may be read */ #define MIXART_PSEUDOREG_DBRD_PRESENCE_OFFSET MIXART_PSEUDOREG+0x990 /* Global info structure */ #define MIXART_PSEUDOREG_DBRD_TYPE_OFFSET MIXART_PSEUDOREG+0x994 /* Type and version of daughterboard */ /* daughterboard xilinx loader info */ #define MIXART_PSEUDOREG_DXLX_BASE_ADDR_OFFSET MIXART_PSEUDOREG+0x998 /* get the address here where to write the file */ #define MIXART_PSEUDOREG_DXLX_SIZE_OFFSET MIXART_PSEUDOREG+0x99C /* xilinx size in bytes */ #define MIXART_PSEUDOREG_DXLX_STATUS_OFFSET MIXART_PSEUDOREG+0x9A0 /* status = EMBEBBED_STAT_XXX */ /* */ #define MIXART_FLOWTABLE_PTR 0x3000 /* pointer to flow table */ /* mailbox addresses */ /* message DRV -> EMB */ #define MSG_INBOUND_POST_HEAD 0x010008 /* DRV posts MF + increment4 */ #define MSG_INBOUND_POST_TAIL 0x01000C /* EMB gets MF + increment4 */ /* message EMB -> DRV */ #define MSG_OUTBOUND_POST_TAIL 0x01001C /* DRV gets MF + increment4 */ #define MSG_OUTBOUND_POST_HEAD 0x010018 /* EMB posts MF + increment4 */ /* Get Free Frames */ #define MSG_INBOUND_FREE_TAIL 0x010004 /* DRV gets MFA + increment4 */ #define MSG_OUTBOUND_FREE_TAIL 0x010014 /* EMB gets MFA + increment4 */ /* Put Free Frames */ #define MSG_OUTBOUND_FREE_HEAD 0x010010 /* DRV puts MFA + increment4 */ #define MSG_INBOUND_FREE_HEAD 0x010000 /* EMB puts MFA + increment4 */ /* firmware addresses of the message fifos */ #define MSG_BOUND_STACK_SIZE 0x004000 /* size of each following stack */ /* posted messages */ #define MSG_OUTBOUND_POST_STACK 0x108000 /* stack of messages to the DRV */ #define MSG_INBOUND_POST_STACK 0x104000 /* stack of messages to the EMB */ /* available empty messages */ #define MSG_OUTBOUND_FREE_STACK 0x10C000 /* stack of free enveloped for EMB */ #define MSG_INBOUND_FREE_STACK 0x100000 /* stack of free enveloped for DRV */ /* defines for mailbox message frames */ #define MSG_FRAME_OFFSET 0x64 #define MSG_FRAME_SIZE 0x6400 #define MSG_FRAME_NUMBER 32 #define MSG_FROM_AGENT_ITMF_OFFSET (MSG_FRAME_OFFSET + (MSG_FRAME_SIZE * MSG_FRAME_NUMBER)) #define MSG_TO_AGENT_ITMF_OFFSET (MSG_FROM_AGENT_ITMF_OFFSET + MSG_FRAME_SIZE) #define MSG_HOST_RSC_PROTECTION (MSG_TO_AGENT_ITMF_OFFSET + MSG_FRAME_SIZE) #define MSG_AGENT_RSC_PROTECTION (MSG_HOST_RSC_PROTECTION + 4) /* * -----------BAR 1 -------------------------------------------------------------------------------------------------------- */ /* interrupt addresses and constants */ #define MIXART_PCI_OMIMR_OFFSET 0x34 /* outbound message interrupt mask register */ #define MIXART_PCI_OMISR_OFFSET 0x30 /* outbound message interrupt status register */ #define MIXART_PCI_ODBR_OFFSET 0x60 /* outbound doorbell register */ #define MIXART_BA1_BRUTAL_RESET_OFFSET 0x68 /* write 1 in LSBit to reset board */ #define MIXART_HOST_ALL_INTERRUPT_MASKED 0x02B /* 0000 0010 1011 */ #define MIXART_ALLOW_OUTBOUND_DOORBELL 0x023 /* 0000 0010 0011 */ #define MIXART_OIDI 0x008 /* 0000 0000 1000 */ int snd_mixart_setup_firmware(struct mixart_mgr *mgr); #endif /* __SOUND_MIXART_HWDEP_H */