/* * mach-davinci/nand.h * * Copyright © 2006 Texas Instruments. * * Ported to 2.6.23 Copyright © 2008 by * Sander Huijsen <Shuijsen@optelecom-nkf.com> * Troy Kisky <troy.kisky@boundarydevices.com> * Dirk Behme <Dirk.Behme@gmail.com> * * -------------------------------------------------------------------------- * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #ifndef __ARCH_ARM_DAVINCI_NAND_H #define __ARCH_ARM_DAVINCI_NAND_H #include <linux/mtd/nand.h> #define NANDFCR_OFFSET 0x60 #define NANDFSR_OFFSET 0x64 #define NANDF1ECC_OFFSET 0x70 /* 4-bit ECC syndrome registers */ #define NAND_4BIT_ECC_LOAD_OFFSET 0xbc #define NAND_4BIT_ECC1_OFFSET 0xc0 #define NAND_4BIT_ECC2_OFFSET 0xc4 #define NAND_4BIT_ECC3_OFFSET 0xc8 #define NAND_4BIT_ECC4_OFFSET 0xcc #define NAND_ERR_ADD1_OFFSET 0xd0 #define NAND_ERR_ADD2_OFFSET 0xd4 #define NAND_ERR_ERRVAL1_OFFSET 0xd8 #define NAND_ERR_ERRVAL2_OFFSET 0xdc /* NOTE: boards don't need to use these address bits * for ALE/CLE unless they support booting from NAND. * They're used unless platform data overrides them. */ #define MASK_ALE 0x08 #define MASK_CLE 0x10 struct davinci_nand_pdata { /* platform_data */ uint32_t mask_ale; uint32_t mask_cle; /* for packages using two chipselects */ uint32_t mask_chipsel; /* board's default static partition info */ struct mtd_partition *parts; unsigned nr_parts; /* none == NAND_ECC_NONE (strongly *not* advised!!) * soft == NAND_ECC_SOFT * else == NAND_ECC_HW, according to ecc_bits * * All DaVinci-family chips support 1-bit hardware ECC. * Newer ones also support 4-bit ECC, but are awkward * using it with large page chips. */ nand_ecc_modes_t ecc_mode; u8 ecc_bits; /* e.g. NAND_BUSWIDTH_16 */ unsigned options; /* e.g. NAND_BBT_USE_FLASH */ unsigned bbt_options; /* Main and mirror bbt descriptor overrides */ struct nand_bbt_descr *bbt_td; struct nand_bbt_descr *bbt_md; /* Access timings */ struct davinci_aemif_timing *timing; }; #endif /* __ARCH_ARM_DAVINCI_NAND_H */