/* * Synopsys DesignWare Multimedia Card Interface driver * (Based on NXP driver for lpc 31xx) * * Copyright (C) 2009 NXP Semiconductors * Copyright (C) 2009, 2010 Imagination Technologies Ltd. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. */ #ifndef LINUX_MMC_DW_MMC_H #define LINUX_MMC_DW_MMC_H #include <linux/scatterlist.h> #include <linux/mmc/core.h> #define MAX_MCI_SLOTS 2 enum dw_mci_state { STATE_IDLE = 0, STATE_SENDING_CMD, STATE_SENDING_DATA, STATE_DATA_BUSY, STATE_SENDING_STOP, STATE_DATA_ERROR, }; enum { EVENT_CMD_COMPLETE = 0, EVENT_XFER_COMPLETE, EVENT_DATA_COMPLETE, EVENT_DATA_ERROR, EVENT_XFER_ERROR }; struct mmc_data; /** * struct dw_mci - MMC controller state shared between all slots * @lock: Spinlock protecting the queue and associated data. * @regs: Pointer to MMIO registers. * @sg: Scatterlist entry currently being processed by PIO code, if any. * @sg_miter: PIO mapping scatterlist iterator. * @cur_slot: The slot which is currently using the controller. * @mrq: The request currently being processed on @cur_slot, * or NULL if the controller is idle. * @cmd: The command currently being sent to the card, or NULL. * @data: The data currently being transferred, or NULL if no data * transfer is in progress. * @use_dma: Whether DMA channel is initialized or not. * @using_dma: Whether DMA is in use for the current transfer. * @sg_dma: Bus address of DMA buffer. * @sg_cpu: Virtual address of DMA buffer. * @dma_ops: Pointer to platform-specific DMA callbacks. * @cmd_status: Snapshot of SR taken upon completion of the current * command. Only valid when EVENT_CMD_COMPLETE is pending. * @data_status: Snapshot of SR taken upon completion of the current * data transfer. Only valid when EVENT_DATA_COMPLETE or * EVENT_DATA_ERROR is pending. * @stop_cmdr: Value to be loaded into CMDR when the stop command is * to be sent. * @dir_status: Direction of current transfer. * @tasklet: Tasklet running the request state machine. * @card_tasklet: Tasklet handling card detect. * @pending_events: Bitmask of events flagged by the interrupt handler * to be processed by the tasklet. * @completed_events: Bitmask of events which the state machine has * processed. * @state: Tasklet state. * @queue: List of slots waiting for access to the controller. * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus * rate and timeout calculations. * @current_speed: Configured rate of the controller. * @num_slots: Number of slots available. * @verid: Denote Version ID. * @data_offset: Set the offset of DATA register according to VERID. * @dev: Device associated with the MMC controller. * @pdata: Platform data associated with the MMC controller. * @drv_data: Driver specific data for identified variant of the controller * @priv: Implementation defined private data. * @biu_clk: Pointer to bus interface unit clock instance. * @ciu_clk: Pointer to card interface unit clock instance. * @slot: Slots sharing this MMC controller. * @fifo_depth: depth of FIFO. * @data_shift: log2 of FIFO item size. * @part_buf_start: Start index in part_buf. * @part_buf_count: Bytes of partial data in part_buf. * @part_buf: Simple buffer for partial fifo reads/writes. * @push_data: Pointer to FIFO push function. * @pull_data: Pointer to FIFO pull function. * @quirks: Set of quirks that apply to specific versions of the IP. * @irq_flags: The flags to be passed to request_irq. * @irq: The irq value to be passed to request_irq. * * Locking * ======= * * @lock is a softirq-safe spinlock protecting @queue as well as * @cur_slot, @mrq and @state. These must always be updated * at the same time while holding @lock. * * The @mrq field of struct dw_mci_slot is also protected by @lock, * and must always be written at the same time as the slot is added to * @queue. * * @pending_events and @completed_events are accessed using atomic bit * operations, so they don't need any locking. * * None of the fields touched by the interrupt handler need any * locking. However, ordering is important: Before EVENT_DATA_ERROR or * EVENT_DATA_COMPLETE is set in @pending_events, all data-related * interrupts must be disabled and @data_status updated with a * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the * CMDRDY interrupt must be disabled and @cmd_status updated with a * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the * bytes_xfered field of @data must be written. This is ensured by * using barriers. */ struct dw_mci { spinlock_t lock; void __iomem *regs; struct scatterlist *sg; struct sg_mapping_iter sg_miter; struct dw_mci_slot *cur_slot; struct mmc_request *mrq; struct mmc_command *cmd; struct mmc_data *data; struct mmc_command stop_abort; unsigned int prev_blksz; unsigned char timing; struct workqueue_struct *card_workqueue; /* DMA interface members*/ int use_dma; int using_dma; dma_addr_t sg_dma; void *sg_cpu; const struct dw_mci_dma_ops *dma_ops; #ifdef CONFIG_MMC_DW_IDMAC unsigned int ring_size; #else struct dw_mci_dma_data *dma_data; #endif u32 cmd_status; u32 data_status; u32 stop_cmdr; u32 dir_status; struct tasklet_struct tasklet; struct work_struct card_work; unsigned long pending_events; unsigned long completed_events; enum dw_mci_state state; struct list_head queue; u32 bus_hz; u32 current_speed; u32 num_slots; u32 fifoth_val; u16 verid; u16 data_offset; struct device *dev; struct dw_mci_board *pdata; const struct dw_mci_drv_data *drv_data; void *priv; struct clk *biu_clk; struct clk *ciu_clk; struct dw_mci_slot *slot[MAX_MCI_SLOTS]; /* FIFO push and pull */ int fifo_depth; int data_shift; u8 part_buf_start; u8 part_buf_count; union { u16 part_buf16; u32 part_buf32; u64 part_buf; }; void (*push_data)(struct dw_mci *host, void *buf, int cnt); void (*pull_data)(struct dw_mci *host, void *buf, int cnt); /* Workaround flags */ u32 quirks; struct regulator *vmmc; /* Power regulator */ unsigned long irq_flags; /* IRQ flags */ int irq; }; /* DMA ops for Internal/External DMAC interface */ struct dw_mci_dma_ops { /* DMA Ops */ int (*init)(struct dw_mci *host); void (*start)(struct dw_mci *host, unsigned int sg_len); void (*complete)(struct dw_mci *host); void (*stop)(struct dw_mci *host); void (*cleanup)(struct dw_mci *host); void (*exit)(struct dw_mci *host); }; /* IP Quirks/flags. */ /* DTO fix for command transmission with IDMAC configured */ #define DW_MCI_QUIRK_IDMAC_DTO BIT(0) /* delay needed between retries on some 2.11a implementations */ #define DW_MCI_QUIRK_RETRY_DELAY BIT(1) /* High Speed Capable - Supports HS cards (up to 50MHz) */ #define DW_MCI_QUIRK_HIGHSPEED BIT(2) /* Unreliable card detection */ #define DW_MCI_QUIRK_BROKEN_CARD_DETECTION BIT(3) /* Slot level quirks */ /* This slot has no write protect */ #define DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT BIT(0) struct dma_pdata; struct block_settings { unsigned short max_segs; /* see blk_queue_max_segments */ unsigned int max_blk_size; /* maximum size of one mmc block */ unsigned int max_blk_count; /* maximum number of blocks in one req*/ unsigned int max_req_size; /* maximum number of bytes in one req*/ unsigned int max_seg_size; /* see blk_queue_max_segment_size */ }; /* Board platform data */ struct dw_mci_board { u32 num_slots; u32 quirks; /* Workaround / Quirk flags */ unsigned int bus_hz; /* Clock speed at the cclk_in pad */ u32 caps; /* Capabilities */ u32 caps2; /* More capabilities */ u32 pm_caps; /* PM capabilities */ /* * Override fifo depth. If 0, autodetect it from the FIFOTH register, * but note that this may not be reliable after a bootloader has used * it. */ unsigned int fifo_depth; /* delay in mS before detecting cards after interrupt */ u32 detect_delay_ms; int (*init)(u32 slot_id, irq_handler_t , void *); int (*get_ro)(u32 slot_id); int (*get_cd)(u32 slot_id); int (*get_ocr)(u32 slot_id); int (*get_bus_wd)(u32 slot_id); /* * Enable power to selected slot and set voltage to desired level. * Voltage levels are specified using MMC_VDD_xxx defines defined * in linux/mmc/host.h file. */ void (*setpower)(u32 slot_id, u32 volt); void (*exit)(u32 slot_id); void (*select_slot)(u32 slot_id); struct dw_mci_dma_ops *dma_ops; struct dma_pdata *data; struct block_settings *blk_settings; }; #endif /* LINUX_MMC_DW_MMC_H */