/****************************************************************************** * * This file is provided under a dual BSD/GPLv2 license. When using or * redistributing this file, you may do so under either license. * * GPL LICENSE SUMMARY * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of version 2 of the GNU General Public License as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110, * USA * * The full GNU General Public License is included in this distribution * in the file called COPYING. * * Contact Information: * Intel Linux Wireless <ilw@linux.intel.com> * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 * * BSD LICENSE * * Copyright(c) 2012 - 2014 Intel Corporation. All rights reserved. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * * * Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * * Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in * the documentation and/or other materials provided with the * distribution. * * Neither the name Intel Corporation nor the names of its * contributors may be used to endorse or promote products derived * from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * *****************************************************************************/ #ifndef __time_event_h__ #define __time_event_h__ #include "fw-api.h" #include "mvm.h" /** * DOC: Time Events - what is it? * * Time Events are a fw feature that allows the driver to control the presence * of the device on the channel. Since the fw supports multiple channels * concurrently, the fw may choose to jump to another channel at any time. * In order to make sure that the fw is on a specific channel at a certain time * and for a certain duration, the driver needs to issue a time event. * * The simplest example is for BSS association. The driver issues a time event, * waits for it to start, and only then tells mac80211 that we can start the * association. This way, we make sure that the association will be done * smoothly and won't be interrupted by channel switch decided within the fw. */ /** * DOC: The flow against the fw * * When the driver needs to make sure we are in a certain channel, at a certain * time and for a certain duration, it sends a Time Event. The flow against the * fw goes like this: * 1) Driver sends a TIME_EVENT_CMD to the fw * 2) Driver gets the response for that command. This response contains the * Unique ID (UID) of the event. * 3) The fw sends notification when the event starts. * * Of course the API provides various options that allow to cover parameters * of the flow. * What is the duration of the event? * What is the start time of the event? * Is there an end-time for the event? * How much can the event be delayed? * Can the event be split? * If yes what is the maximal number of chunks? * etc... */ /** * DOC: Abstraction to the driver * * In order to simplify the use of time events to the rest of the driver, * we abstract the use of time events. This component provides the functions * needed by the driver. */ #define IWL_MVM_TE_SESSION_PROTECTION_MAX_TIME_MS 500 #define IWL_MVM_TE_SESSION_PROTECTION_MIN_TIME_MS 400 /** * iwl_mvm_protect_session - start / extend the session protection. * @mvm: the mvm component * @vif: the virtual interface for which the session is issued * @duration: the duration of the session in TU. * @min_duration: will start a new session if the current session will end * in less than min_duration. * @max_delay: maximum delay before starting the time event (in TU) * * This function can be used to start a session protection which means that the * fw will stay on the channel for %duration_ms milliseconds. This function * will block (sleep) until the session starts. This function can also be used * to extend a currently running session. * This function is meant to be used for BSS association for example, where we * want to make sure that the fw stays on the channel during the association. */ void iwl_mvm_protect_session(struct iwl_mvm *mvm, struct ieee80211_vif *vif, u32 duration, u32 min_duration, u32 max_delay); /** * iwl_mvm_stop_session_protection - cancel the session protection. * @mvm: the mvm component * @vif: the virtual interface for which the session is issued * * This functions cancels the session protection which is an act of good * citizenship. If it is not needed any more it should be cancelled because * the other bindings wait for the medium during that time. * This funtions doesn't sleep. */ void iwl_mvm_stop_session_protection(struct iwl_mvm *mvm, struct ieee80211_vif *vif); /* * iwl_mvm_rx_time_event_notif - handles %TIME_EVENT_NOTIFICATION. */ int iwl_mvm_rx_time_event_notif(struct iwl_mvm *mvm, struct iwl_rx_cmd_buffer *rxb, struct iwl_device_cmd *cmd); /** * iwl_mvm_start_p2p_roc - start remain on channel for p2p device functionlity * @mvm: the mvm component * @vif: the virtual interface for which the roc is requested. It is assumed * that the vif type is NL80211_IFTYPE_P2P_DEVICE * @duration: the requested duration in millisecond for the fw to be on the * channel that is bound to the vif. * @type: the remain on channel request type * * This function can be used to issue a remain on channel session, * which means that the fw will stay in the channel for the request %duration * milliseconds. The function is async, meaning that it only issues the ROC * request but does not wait for it to start. Once the FW is ready to serve the * ROC request, it will issue a notification to the driver that it is on the * requested channel. Once the FW completes the ROC request it will issue * another notification to the driver. */ int iwl_mvm_start_p2p_roc(struct iwl_mvm *mvm, struct ieee80211_vif *vif, int duration, enum ieee80211_roc_type type); /** * iwl_mvm_stop_p2p_roc - stop remain on channel for p2p device functionlity * @mvm: the mvm component * * This function can be used to cancel an ongoing ROC session. * The function is async, it will instruct the FW to stop serving the ROC * session, but will not wait for the actual stopping of the session. */ void iwl_mvm_stop_p2p_roc(struct iwl_mvm *mvm); /** * iwl_mvm_remove_time_event - general function to clean up of time event * @mvm: the mvm component * @vif: the vif to which the time event belongs * @te_data: the time event data that corresponds to that time event * * This function can be used to cancel a time event regardless its type. * It is useful for cleaning up time events running before removing an * interface. */ void iwl_mvm_remove_time_event(struct iwl_mvm *mvm, struct iwl_mvm_vif *mvmvif, struct iwl_mvm_time_event_data *te_data); /** * iwl_mvm_te_clear_data - remove time event from list * @mvm: the mvm component * @te_data: the time event data to remove * * This function is mostly internal, it is made available here only * for firmware restart purposes. */ void iwl_mvm_te_clear_data(struct iwl_mvm *mvm, struct iwl_mvm_time_event_data *te_data); void iwl_mvm_roc_done_wk(struct work_struct *wk); #endif /* __time_event_h__ */