/* * CoreChip-sz SR9700 one chip USB 1.1 Ethernet Devices * * Author : Liu Junliang <liujunliang_ljl@163.com> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * version 2 as published by the Free Software Foundation. */ #ifndef _SR9700_H #define _SR9700_H /* sr9700 spec. register table on Linux platform */ /* Network Control Reg */ #define NCR 0x00 #define NCR_RST (1 << 0) #define NCR_LBK (3 << 1) #define NCR_FDX (1 << 3) #define NCR_WAKEEN (1 << 6) /* Network Status Reg */ #define NSR 0x01 #define NSR_RXRDY (1 << 0) #define NSR_RXOV (1 << 1) #define NSR_TX1END (1 << 2) #define NSR_TX2END (1 << 3) #define NSR_TXFULL (1 << 4) #define NSR_WAKEST (1 << 5) #define NSR_LINKST (1 << 6) #define NSR_SPEED (1 << 7) /* Tx Control Reg */ #define TCR 0x02 #define TCR_CRC_DIS (1 << 1) #define TCR_PAD_DIS (1 << 2) #define TCR_LC_CARE (1 << 3) #define TCR_CRS_CARE (1 << 4) #define TCR_EXCECM (1 << 5) #define TCR_LF_EN (1 << 6) /* Tx Status Reg for Packet Index 1 */ #define TSR1 0x03 #define TSR1_EC (1 << 2) #define TSR1_COL (1 << 3) #define TSR1_LC (1 << 4) #define TSR1_NC (1 << 5) #define TSR1_LOC (1 << 6) #define TSR1_TLF (1 << 7) /* Tx Status Reg for Packet Index 2 */ #define TSR2 0x04 #define TSR2_EC (1 << 2) #define TSR2_COL (1 << 3) #define TSR2_LC (1 << 4) #define TSR2_NC (1 << 5) #define TSR2_LOC (1 << 6) #define TSR2_TLF (1 << 7) /* Rx Control Reg*/ #define RCR 0x05 #define RCR_RXEN (1 << 0) #define RCR_PRMSC (1 << 1) #define RCR_RUNT (1 << 2) #define RCR_ALL (1 << 3) #define RCR_DIS_CRC (1 << 4) #define RCR_DIS_LONG (1 << 5) /* Rx Status Reg */ #define RSR 0x06 #define RSR_AE (1 << 2) #define RSR_MF (1 << 6) #define RSR_RF (1 << 7) /* Rx Overflow Counter Reg */ #define ROCR 0x07 #define ROCR_ROC (0x7F << 0) #define ROCR_RXFU (1 << 7) /* Back Pressure Threshold Reg */ #define BPTR 0x08 #define BPTR_JPT (0x0F << 0) #define BPTR_BPHW (0x0F << 4) /* Flow Control Threshold Reg */ #define FCTR 0x09 #define FCTR_LWOT (0x0F << 0) #define FCTR_HWOT (0x0F << 4) /* rx/tx Flow Control Reg */ #define FCR 0x0A #define FCR_FLCE (1 << 0) #define FCR_BKPA (1 << 4) #define FCR_TXPEN (1 << 5) #define FCR_TXPF (1 << 6) #define FCR_TXP0 (1 << 7) /* Eeprom & Phy Control Reg */ #define EPCR 0x0B #define EPCR_ERRE (1 << 0) #define EPCR_ERPRW (1 << 1) #define EPCR_ERPRR (1 << 2) #define EPCR_EPOS (1 << 3) #define EPCR_WEP (1 << 4) /* Eeprom & Phy Address Reg */ #define EPAR 0x0C #define EPAR_EROA (0x3F << 0) #define EPAR_PHY_ADR_MASK (0x03 << 6) #define EPAR_PHY_ADR (0x01 << 6) /* Eeprom & Phy Data Reg */ #define EPDR 0x0D /* 0x0D ~ 0x0E for Data Reg Low & High */ /* Wakeup Control Reg */ #define WCR 0x0F #define WCR_MAGICST (1 << 0) #define WCR_LINKST (1 << 2) #define WCR_MAGICEN (1 << 3) #define WCR_LINKEN (1 << 5) /* Physical Address Reg */ #define PAR 0x10 /* 0x10 ~ 0x15 6 bytes for PAR */ /* Multicast Address Reg */ #define MAR 0x16 /* 0x16 ~ 0x1D 8 bytes for MAR */ /* 0x1e unused */ /* Phy Reset Reg */ #define PRR 0x1F #define PRR_PHY_RST (1 << 0) /* Tx sdram Write Pointer Address Low */ #define TWPAL 0x20 /* Tx sdram Write Pointer Address High */ #define TWPAH 0x21 /* Tx sdram Read Pointer Address Low */ #define TRPAL 0x22 /* Tx sdram Read Pointer Address High */ #define TRPAH 0x23 /* Rx sdram Write Pointer Address Low */ #define RWPAL 0x24 /* Rx sdram Write Pointer Address High */ #define RWPAH 0x25 /* Rx sdram Read Pointer Address Low */ #define RRPAL 0x26 /* Rx sdram Read Pointer Address High */ #define RRPAH 0x27 /* Vendor ID register */ #define VID 0x28 /* 0x28 ~ 0x29 2 bytes for VID */ /* Product ID register */ #define PID 0x2A /* 0x2A ~ 0x2B 2 bytes for PID */ /* CHIP Revision register */ #define CHIPR 0x2C /* 0x2D --> 0xEF unused */ /* USB Device Address */ #define USBDA 0xF0 #define USBDA_USBFA (0x7F << 0) /* RX packet Counter Reg */ #define RXC 0xF1 /* Tx packet Counter & USB Status Reg */ #define TXC_USBS 0xF2 #define TXC_USBS_TXC0 (1 << 0) #define TXC_USBS_TXC1 (1 << 1) #define TXC_USBS_TXC2 (1 << 2) #define TXC_USBS_EP1RDY (1 << 5) #define TXC_USBS_SUSFLAG (1 << 6) #define TXC_USBS_RXFAULT (1 << 7) /* USB Control register */ #define USBC 0xF4 #define USBC_EP3NAK (1 << 4) #define USBC_EP3ACK (1 << 5) /* Register access commands and flags */ #define SR_RD_REGS 0x00 #define SR_WR_REGS 0x01 #define SR_WR_REG 0x03 #define SR_REQ_RD_REG (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE) #define SR_REQ_WR_REG (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE) /* parameters */ #define SR_SHARE_TIMEOUT 1000 #define SR_EEPROM_LEN 256 #define SR_MCAST_SIZE 8 #define SR_MCAST_ADDR_FLAG 0x80 #define SR_MCAST_MAX 64 #define SR_TX_OVERHEAD 2 /* 2bytes header */ #define SR_RX_OVERHEAD 7 /* 3bytes header + 4crc tail */ #endif /* _SR9700_H */