/****************************************************************************
* Driver for Solarflare network controllers and boards
* Copyright 2010-2012 Solarflare Communications Inc.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation, incorporated herein by reference.
*/
#ifndef _VFDI_H
#define _VFDI_H
/**
* DOC: Virtual Function Driver Interface
*
* This file contains software structures used to form a two way
* communication channel between the VF driver and the PF driver,
* named Virtual Function Driver Interface (VFDI).
*
* For the purposes of VFDI, a page is a memory region with size and
* alignment of 4K. All addresses are DMA addresses to be used within
* the domain of the relevant VF.
*
* The only hardware-defined channels for a VF driver to communicate
* with the PF driver are the event mailboxes (%FR_CZ_USR_EV
* registers). Writing to these registers generates an event with
* EV_CODE = EV_CODE_USR_EV, USER_QID set to the index of the mailbox
* and USER_EV_REG_VALUE set to the value written. The PF driver may
* direct or disable delivery of these events by setting
* %FR_CZ_USR_EV_CFG.
*
* The PF driver can send arbitrary events to arbitrary event queues.
* However, for consistency, VFDI events from the PF are defined to
* follow the same form and be sent to the first event queue assigned
* to the VF while that queue is enabled by the VF driver.
*
* The general form of the variable bits of VFDI events is:
*
* 0 16 24 31
* | DATA | TYPE | SEQ |
*
* SEQ is a sequence number which should be incremented by 1 (modulo
* 256) for each event. The sequence numbers used in each direction
* are independent.
*
* The VF submits requests of type &struct vfdi_req by sending the
* address of the request (ADDR) in a series of 4 events:
*
* 0 16 24 31
* | ADDR[0:15] | VFDI_EV_TYPE_REQ_WORD0 | SEQ |
* | ADDR[16:31] | VFDI_EV_TYPE_REQ_WORD1 | SEQ+1 |
* | ADDR[32:47] | VFDI_EV_TYPE_REQ_WORD2 | SEQ+2 |
* | ADDR[48:63] | VFDI_EV_TYPE_REQ_WORD3 | SEQ+3 |
*
* The address must be page-aligned. After receiving such a valid
* series of events, the PF driver will attempt to read the request
* and write a response to the same address. In case of an invalid
* sequence of events or a DMA error, there will be no response.
*
* The VF driver may request that the PF driver writes status
* information into its domain asynchronously. After writing the
* status, the PF driver will send an event of the form:
*
* 0 16 24 31
* | reserved | VFDI_EV_TYPE_STATUS | SEQ |
*
* In case the VF must be reset for any reason, the PF driver will
* send an event of the form:
*
* 0 16 24 31
* | reserved | VFDI_EV_TYPE_RESET | SEQ |
*
* It is then the responsibility of the VF driver to request
* reinitialisation of its queues.
*/
#define VFDI_EV_SEQ_LBN 24
#define VFDI_EV_SEQ_WIDTH 8
#define VFDI_EV_TYPE_LBN 16
#define VFDI_EV_TYPE_WIDTH 8
#define VFDI_EV_TYPE_REQ_WORD0 0
#define VFDI_EV_TYPE_REQ_WORD1 1
#define VFDI_EV_TYPE_REQ_WORD2 2
#define VFDI_EV_TYPE_REQ_WORD3 3
#define VFDI_EV_TYPE_STATUS 4
#define VFDI_EV_TYPE_RESET 5
#define VFDI_EV_DATA_LBN 0
#define VFDI_EV_DATA_WIDTH 16
struct vfdi_endpoint {
u8 mac_addr[ETH_ALEN];
__be16 tci;
};
/**
* enum vfdi_op - VFDI operation enumeration
* @VFDI_OP_RESPONSE: Indicates a response to the request.
* @VFDI_OP_INIT_EVQ: Initialize SRAM entries and initialize an EVQ.
* @VFDI_OP_INIT_RXQ: Initialize SRAM entries and initialize an RXQ.
* @VFDI_OP_INIT_TXQ: Initialize SRAM entries and initialize a TXQ.
* @VFDI_OP_FINI_ALL_QUEUES: Flush all queues, finalize all queues, then
* finalize the SRAM entries.
* @VFDI_OP_INSERT_FILTER: Insert a MAC filter targetting the given RXQ.
* @VFDI_OP_REMOVE_ALL_FILTERS: Remove all filters.
* @VFDI_OP_SET_STATUS_PAGE: Set the DMA page(s) used for status updates
* from PF and write the initial status.
* @VFDI_OP_CLEAR_STATUS_PAGE: Clear the DMA page(s) used for status
* updates from PF.
*/
enum vfdi_op {
VFDI_OP_RESPONSE = 0,
VFDI_OP_INIT_EVQ = 1,
VFDI_OP_INIT_RXQ = 2,
VFDI_OP_INIT_TXQ = 3,
VFDI_OP_FINI_ALL_QUEUES = 4,
VFDI_OP_INSERT_FILTER = 5,
VFDI_OP_REMOVE_ALL_FILTERS = 6,
VFDI_OP_SET_STATUS_PAGE = 7,
VFDI_OP_CLEAR_STATUS_PAGE = 8,
VFDI_OP_LIMIT,
};
/* Response codes for VFDI operations. Other values may be used in future. */
#define VFDI_RC_SUCCESS 0
#define VFDI_RC_ENOMEM (-12)
#define VFDI_RC_EINVAL (-22)
#define VFDI_RC_EOPNOTSUPP (-95)
#define VFDI_RC_ETIMEDOUT (-110)
/**
* struct vfdi_req - Request from VF driver to PF driver
* @op: Operation code or response indicator, taken from &enum vfdi_op.
* @rc: Response code. Set to 0 on success or a negative error code on failure.
* @u.init_evq.index: Index of event queue to create.
* @u.init_evq.buf_count: Number of 4k buffers backing event queue.
* @u.init_evq.addr: Array of length %u.init_evq.buf_count containing DMA
* address of each page backing the event queue.
* @u.init_rxq.index: Index of receive queue to create.
* @u.init_rxq.buf_count: Number of 4k buffers backing receive queue.
* @u.init_rxq.evq: Instance of event queue to target receive events at.
* @u.init_rxq.label: Label used in receive events.
* @u.init_rxq.flags: Unused.
* @u.init_rxq.addr: Array of length %u.init_rxq.buf_count containing DMA
* address of each page backing the receive queue.
* @u.init_txq.index: Index of transmit queue to create.
* @u.init_txq.buf_count: Number of 4k buffers backing transmit queue.
* @u.init_txq.evq: Instance of event queue to target transmit completion
* events at.
* @u.init_txq.label: Label used in transmit completion events.
* @u.init_txq.flags: Checksum offload flags.
* @u.init_txq.addr: Array of length %u.init_txq.buf_count containing DMA
* address of each page backing the transmit queue.
* @u.mac_filter.rxq: Insert MAC filter at VF local address/VLAN targetting
* all traffic at this receive queue.
* @u.mac_filter.flags: MAC filter flags.
* @u.set_status_page.dma_addr: Base address for the &struct vfdi_status.
* This address must be page-aligned and the PF may write up to a
* whole page (allowing for extension of the structure).
* @u.set_status_page.peer_page_count: Number of additional pages the VF
* has provided into which peer addresses may be DMAd.
* @u.set_status_page.peer_page_addr: Array of DMA addresses of pages.
* If the number of peers exceeds 256, then the VF must provide
* additional pages in this array. The PF will then DMA up to
* 512 vfdi_endpoint structures into each page. These addresses
* must be page-aligned.
*/
struct vfdi_req {
u32 op;
u32 reserved1;
s32 rc;
u32 reserved2;
union {
struct {
u32 index;
u32 buf_count;
u64 addr[];
} init_evq;
struct {
u32 index;
u32 buf_count;
u32 evq;
u32 label;
u32 flags;
#define VFDI_RXQ_FLAG_SCATTER_EN 1
u32 reserved;
u64 addr[];
} init_rxq;
struct {
u32 index;
u32 buf_count;
u32 evq;
u32 label;
u32 flags;
#define VFDI_TXQ_FLAG_IP_CSUM_DIS 1
#define VFDI_TXQ_FLAG_TCPUDP_CSUM_DIS 2
u32 reserved;
u64 addr[];
} init_txq;
struct {
u32 rxq;
u32 flags;
#define VFDI_MAC_FILTER_FLAG_RSS 1
#define VFDI_MAC_FILTER_FLAG_SCATTER 2
} mac_filter;
struct {
u64 dma_addr;
u64 peer_page_count;
u64 peer_page_addr[];
} set_status_page;
} u;
};
/**
* struct vfdi_status - Status provided by PF driver to VF driver
* @generation_start: A generation count DMA'd to VF *before* the
* rest of the structure.
* @generation_end: A generation count DMA'd to VF *after* the
* rest of the structure.
* @version: Version of this structure; currently set to 1. Later
* versions must either be layout-compatible or only be sent to VFs
* that specifically request them.
* @length: Total length of this structure including embedded tables
* @vi_scale: log2 the number of VIs available on this VF. This quantity
* is used by the hardware for register decoding.
* @max_tx_channels: The maximum number of transmit queues the VF can use.
* @rss_rxq_count: The number of receive queues present in the shared RSS
* indirection table.
* @peer_count: Total number of peers in the complete peer list. If larger
* than ARRAY_SIZE(%peers), then the VF must provide sufficient
* additional pages each of which is filled with vfdi_endpoint structures.
* @local: The MAC address and outer VLAN tag of *this* VF
* @peers: Table of peer addresses. The @tci fields in these structures
* are currently unused and must be ignored. Additional peers are
* written into any additional pages provided by the VF.
* @timer_quantum_ns: Timer quantum (nominal period between timer ticks)
* for interrupt moderation timers, in nanoseconds. This member is only
* present if @length is sufficiently large.
*/
struct vfdi_status {
u32 generation_start;
u32 generation_end;
u32 version;
u32 length;
u8 vi_scale;
u8 max_tx_channels;
u8 rss_rxq_count;
u8 reserved1;
u16 peer_count;
u16 reserved2;
struct vfdi_endpoint local;
struct vfdi_endpoint peers[256];
/* Members below here extend version 1 of this structure */
u32 timer_quantum_ns;
};
#endif