/* * Copyright(c) 2008 - 2009 Atheros Corporation. All rights reserved. * * Derived from Intel e1000 driver * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation; either version 2 of the License, or (at your option) * any later version. * * This program is distributed in the hope that it will be useful, but WITHOUT * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for * more details. * * You should have received a copy of the GNU General Public License along with * this program; if not, write to the Free Software Foundation, Inc., 59 * Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #ifndef _ATL1C_HW_H_ #define _ATL1C_HW_H_ #include <linux/types.h> #include <linux/mii.h> #define FIELD_GETX(_x, _name) ((_x) >> (_name##_SHIFT) & (_name##_MASK)) #define FIELD_SETX(_x, _name, _v) \ (((_x) & ~((_name##_MASK) << (_name##_SHIFT))) |\ (((_v) & (_name##_MASK)) << (_name##_SHIFT))) #define FIELDX(_name, _v) (((_v) & (_name##_MASK)) << (_name##_SHIFT)) struct atl1c_adapter; struct atl1c_hw; /* function prototype */ void atl1c_phy_disable(struct atl1c_hw *hw); void atl1c_hw_set_mac_addr(struct atl1c_hw *hw, u8 *mac_addr); int atl1c_phy_reset(struct atl1c_hw *hw); int atl1c_read_mac_addr(struct atl1c_hw *hw); int atl1c_get_speed_and_duplex(struct atl1c_hw *hw, u16 *speed, u16 *duplex); u32 atl1c_hash_mc_addr(struct atl1c_hw *hw, u8 *mc_addr); void atl1c_hash_set(struct atl1c_hw *hw, u32 hash_value); int atl1c_read_phy_reg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data); int atl1c_write_phy_reg(struct atl1c_hw *hw, u32 reg_addr, u16 phy_data); bool atl1c_read_eeprom(struct atl1c_hw *hw, u32 offset, u32 *p_value); int atl1c_phy_init(struct atl1c_hw *hw); int atl1c_check_eeprom_exist(struct atl1c_hw *hw); int atl1c_restart_autoneg(struct atl1c_hw *hw); int atl1c_phy_to_ps_link(struct atl1c_hw *hw); int atl1c_power_saving(struct atl1c_hw *hw, u32 wufc); bool atl1c_wait_mdio_idle(struct atl1c_hw *hw); void atl1c_stop_phy_polling(struct atl1c_hw *hw); void atl1c_start_phy_polling(struct atl1c_hw *hw, u16 clk_sel); int atl1c_read_phy_core(struct atl1c_hw *hw, bool ext, u8 dev, u16 reg, u16 *phy_data); int atl1c_write_phy_core(struct atl1c_hw *hw, bool ext, u8 dev, u16 reg, u16 phy_data); int atl1c_read_phy_ext(struct atl1c_hw *hw, u8 dev_addr, u16 reg_addr, u16 *phy_data); int atl1c_write_phy_ext(struct atl1c_hw *hw, u8 dev_addr, u16 reg_addr, u16 phy_data); int atl1c_read_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 *phy_data); int atl1c_write_phy_dbg(struct atl1c_hw *hw, u16 reg_addr, u16 phy_data); void atl1c_post_phy_linkchg(struct atl1c_hw *hw, u16 link_speed); /* hw-ids */ #define PCI_DEVICE_ID_ATTANSIC_L2C 0x1062 #define PCI_DEVICE_ID_ATTANSIC_L1C 0x1063 #define PCI_DEVICE_ID_ATHEROS_L2C_B 0x2060 /* AR8152 v1.1 Fast 10/100 */ #define PCI_DEVICE_ID_ATHEROS_L2C_B2 0x2062 /* AR8152 v2.0 Fast 10/100 */ #define PCI_DEVICE_ID_ATHEROS_L1D 0x1073 /* AR8151 v1.0 Gigabit 1000 */ #define PCI_DEVICE_ID_ATHEROS_L1D_2_0 0x1083 /* AR8151 v2.0 Gigabit 1000 */ #define L2CB_V10 0xc0 #define L2CB_V11 0xc1 #define L2CB_V20 0xc0 #define L2CB_V21 0xc1 /* register definition */ #define REG_DEVICE_CAP 0x5C #define DEVICE_CAP_MAX_PAYLOAD_MASK 0x7 #define DEVICE_CAP_MAX_PAYLOAD_SHIFT 0 #define DEVICE_CTRL_MAXRRS_MIN 2 #define REG_LINK_CTRL 0x68 #define LINK_CTRL_L0S_EN 0x01 #define LINK_CTRL_L1_EN 0x02 #define LINK_CTRL_EXT_SYNC 0x80 #define REG_PCIE_IND_ACC_ADDR 0x80 #define REG_PCIE_IND_ACC_DATA 0x84 #define REG_DEV_SERIALNUM_CTRL 0x200 #define REG_DEV_MAC_SEL_MASK 0x0 /* 0:EUI; 1:MAC */ #define REG_DEV_MAC_SEL_SHIFT 0 #define REG_DEV_SERIAL_NUM_EN_MASK 0x1 #define REG_DEV_SERIAL_NUM_EN_SHIFT 1 #define REG_TWSI_CTRL 0x218 #define TWSI_CTLR_FREQ_MASK 0x3UL #define TWSI_CTRL_FREQ_SHIFT 24 #define TWSI_CTRL_FREQ_100K 0 #define TWSI_CTRL_FREQ_200K 1 #define TWSI_CTRL_FREQ_300K 2 #define TWSI_CTRL_FREQ_400K 3 #define TWSI_CTRL_LD_EXIST BIT(23) #define TWSI_CTRL_HW_LDSTAT BIT(12) /* 0:finish,1:in progress */ #define TWSI_CTRL_SW_LDSTART BIT(11) #define TWSI_CTRL_LD_OFFSET_MASK 0xFF #define TWSI_CTRL_LD_OFFSET_SHIFT 0 #define REG_PCIE_DEV_MISC_CTRL 0x21C #define PCIE_DEV_MISC_EXT_PIPE 0x2 #define PCIE_DEV_MISC_RETRY_BUFDIS 0x1 #define PCIE_DEV_MISC_SPIROM_EXIST 0x4 #define PCIE_DEV_MISC_SERDES_ENDIAN 0x8 #define PCIE_DEV_MISC_SERDES_SEL_DIN 0x10 #define REG_PCIE_PHYMISC 0x1000 #define PCIE_PHYMISC_FORCE_RCV_DET BIT(2) #define PCIE_PHYMISC_NFTS_MASK 0xFFUL #define PCIE_PHYMISC_NFTS_SHIFT 16 #define REG_PCIE_PHYMISC2 0x1004 #define PCIE_PHYMISC2_L0S_TH_MASK 0x3UL #define PCIE_PHYMISC2_L0S_TH_SHIFT 18 #define L2CB1_PCIE_PHYMISC2_L0S_TH 3 #define PCIE_PHYMISC2_CDR_BW_MASK 0x3UL #define PCIE_PHYMISC2_CDR_BW_SHIFT 16 #define L2CB1_PCIE_PHYMISC2_CDR_BW 3 #define REG_TWSI_DEBUG 0x1108 #define TWSI_DEBUG_DEV_EXIST BIT(29) #define REG_DMA_DBG 0x1114 #define DMA_DBG_VENDOR_MSG BIT(0) #define REG_EEPROM_CTRL 0x12C0 #define EEPROM_CTRL_DATA_HI_MASK 0xFFFF #define EEPROM_CTRL_DATA_HI_SHIFT 0 #define EEPROM_CTRL_ADDR_MASK 0x3FF #define EEPROM_CTRL_ADDR_SHIFT 16 #define EEPROM_CTRL_ACK 0x40000000 #define EEPROM_CTRL_RW 0x80000000 #define REG_EEPROM_DATA_LO 0x12C4 #define REG_OTP_CTRL 0x12F0 #define OTP_CTRL_CLK_EN BIT(1) #define REG_PM_CTRL 0x12F8 #define PM_CTRL_HOTRST BIT(31) #define PM_CTRL_MAC_ASPM_CHK BIT(30) /* L0s/L1 dis by MAC based on * thrghput(setting in 15A0) */ #define PM_CTRL_SA_DLY_EN BIT(29) #define PM_CTRL_L0S_BUFSRX_EN BIT(28) #define PM_CTRL_LCKDET_TIMER_MASK 0xFUL #define PM_CTRL_LCKDET_TIMER_SHIFT 24 #define PM_CTRL_LCKDET_TIMER_DEF 0xC #define PM_CTRL_PM_REQ_TIMER_MASK 0xFUL #define PM_CTRL_PM_REQ_TIMER_SHIFT 20 /* pm_request_l1 time > @ * ->L0s not L1 */ #define PM_CTRL_PM_REQ_TO_DEF 0xF #define PMCTRL_TXL1_AFTER_L0S BIT(19) /* l1dv2.0+ */ #define L1D_PMCTRL_L1_ENTRY_TM_MASK 7UL /* l1dv2.0+, 3bits */ #define L1D_PMCTRL_L1_ENTRY_TM_SHIFT 16 #define L1D_PMCTRL_L1_ENTRY_TM_DIS 0 #define L1D_PMCTRL_L1_ENTRY_TM_2US 1 #define L1D_PMCTRL_L1_ENTRY_TM_4US 2 #define L1D_PMCTRL_L1_ENTRY_TM_8US 3 #define L1D_PMCTRL_L1_ENTRY_TM_16US 4 #define L1D_PMCTRL_L1_ENTRY_TM_24US 5 #define L1D_PMCTRL_L1_ENTRY_TM_32US 6 #define L1D_PMCTRL_L1_ENTRY_TM_63US 7 #define PM_CTRL_L1_ENTRY_TIMER_MASK 0xFUL /* l1C 4bits */ #define PM_CTRL_L1_ENTRY_TIMER_SHIFT 16 #define L2CB1_PM_CTRL_L1_ENTRY_TM 7 #define L1C_PM_CTRL_L1_ENTRY_TM 0xF #define PM_CTRL_RCVR_WT_TIMER BIT(15) /* 1:1us, 0:2ms */ #define PM_CTRL_CLK_PWM_VER1_1 BIT(14) /* 0:1.0a,1:1.1 */ #define PM_CTRL_CLK_SWH_L1 BIT(13) /* en pcie clk sw in L1 */ #define PM_CTRL_ASPM_L0S_EN BIT(12) #define PM_CTRL_RXL1_AFTER_L0S BIT(11) /* l1dv2.0+ */ #define L1D_PMCTRL_L0S_TIMER_MASK 7UL /* l1d2.0+, 3bits*/ #define L1D_PMCTRL_L0S_TIMER_SHIFT 8 #define PM_CTRL_L0S_ENTRY_TIMER_MASK 0xFUL /* l1c, 4bits */ #define PM_CTRL_L0S_ENTRY_TIMER_SHIFT 8 #define PM_CTRL_SERDES_BUFS_RX_L1_EN BIT(7) #define PM_CTRL_SERDES_PD_EX_L1 BIT(6) /* power down serdes rx */ #define PM_CTRL_SERDES_PLL_L1_EN BIT(5) #define PM_CTRL_SERDES_L1_EN BIT(4) #define PM_CTRL_ASPM_L1_EN BIT(3) #define PM_CTRL_CLK_REQ_EN BIT(2) #define PM_CTRL_RBER_EN BIT(1) #define PM_CTRL_SPRSDWER_EN BIT(0) #define REG_LTSSM_ID_CTRL 0x12FC #define LTSSM_ID_EN_WRO 0x1000 /* Selene Master Control Register */ #define REG_MASTER_CTRL 0x1400 #define MASTER_CTRL_OTP_SEL BIT(31) #define MASTER_DEV_NUM_MASK 0x7FUL #define MASTER_DEV_NUM_SHIFT 24 #define MASTER_REV_NUM_MASK 0xFFUL #define MASTER_REV_NUM_SHIFT 16 #define MASTER_CTRL_INT_RDCLR BIT(14) #define MASTER_CTRL_CLK_SEL_DIS BIT(12) /* 1:alwys sel pclk from * serdes, not sw to 25M */ #define MASTER_CTRL_RX_ITIMER_EN BIT(11) /* IRQ MODURATION FOR RX */ #define MASTER_CTRL_TX_ITIMER_EN BIT(10) /* MODURATION FOR TX/RX */ #define MASTER_CTRL_MANU_INT BIT(9) /* SOFT MANUAL INT */ #define MASTER_CTRL_MANUTIMER_EN BIT(8) #define MASTER_CTRL_SA_TIMER_EN BIT(7) /* SYS ALIVE TIMER EN */ #define MASTER_CTRL_OOB_DIS BIT(6) /* OUT OF BOX DIS */ #define MASTER_CTRL_WAKEN_25M BIT(5) /* WAKE WO. PCIE CLK */ #define MASTER_CTRL_BERT_START BIT(4) #define MASTER_PCIE_TSTMOD_MASK 3UL #define MASTER_PCIE_TSTMOD_SHIFT 2 #define MASTER_PCIE_RST BIT(1) #define MASTER_CTRL_SOFT_RST BIT(0) /* RST MAC & DMA */ #define DMA_MAC_RST_TO 50 /* Timer Initial Value Register */ #define REG_MANUAL_TIMER_INIT 0x1404 /* IRQ ModeratorTimer Initial Value Register */ #define REG_IRQ_MODRT_TIMER_INIT 0x1408 #define IRQ_MODRT_TIMER_MASK 0xffff #define IRQ_MODRT_TX_TIMER_SHIFT 0 #define IRQ_MODRT_RX_TIMER_SHIFT 16 #define REG_GPHY_CTRL 0x140C #define GPHY_CTRL_ADDR_MASK 0x1FUL #define GPHY_CTRL_ADDR_SHIFT 19 #define GPHY_CTRL_BP_VLTGSW BIT(18) #define GPHY_CTRL_100AB_EN BIT(17) #define GPHY_CTRL_10AB_EN BIT(16) #define GPHY_CTRL_PHY_PLL_BYPASS BIT(15) #define GPHY_CTRL_PWDOWN_HW BIT(14) /* affect MAC&PHY, to low pw */ #define GPHY_CTRL_PHY_PLL_ON BIT(13) /* 1:pll always on, 0:can sw */ #define GPHY_CTRL_SEL_ANA_RST BIT(12) #define GPHY_CTRL_HIB_PULSE BIT(11) #define GPHY_CTRL_HIB_EN BIT(10) #define GPHY_CTRL_GIGA_DIS BIT(9) #define GPHY_CTRL_PHY_IDDQ_DIS BIT(8) /* pw on RST */ #define GPHY_CTRL_PHY_IDDQ BIT(7) /* bit8 affect bit7 while rb */ #define GPHY_CTRL_LPW_EXIT BIT(6) #define GPHY_CTRL_GATE_25M_EN BIT(5) #define GPHY_CTRL_REV_ANEG BIT(4) #define GPHY_CTRL_ANEG_NOW BIT(3) #define GPHY_CTRL_LED_MODE BIT(2) #define GPHY_CTRL_RTL_MODE BIT(1) #define GPHY_CTRL_EXT_RESET BIT(0) /* 1:out of DSP RST status */ #define GPHY_CTRL_EXT_RST_TO 80 /* 800us atmost */ #define GPHY_CTRL_CLS (\ GPHY_CTRL_LED_MODE |\ GPHY_CTRL_100AB_EN |\ GPHY_CTRL_PHY_PLL_ON) /* Block IDLE Status Register */ #define REG_IDLE_STATUS 0x1410 #define IDLE_STATUS_SFORCE_MASK 0xFUL #define IDLE_STATUS_SFORCE_SHIFT 14 #define IDLE_STATUS_CALIB_DONE BIT(13) #define IDLE_STATUS_CALIB_RES_MASK 0x1FUL #define IDLE_STATUS_CALIB_RES_SHIFT 8 #define IDLE_STATUS_CALIBERR_MASK 0xFUL #define IDLE_STATUS_CALIBERR_SHIFT 4 #define IDLE_STATUS_TXQ_BUSY BIT(3) #define IDLE_STATUS_RXQ_BUSY BIT(2) #define IDLE_STATUS_TXMAC_BUSY BIT(1) #define IDLE_STATUS_RXMAC_BUSY BIT(0) #define IDLE_STATUS_MASK (\ IDLE_STATUS_TXQ_BUSY |\ IDLE_STATUS_RXQ_BUSY |\ IDLE_STATUS_TXMAC_BUSY |\ IDLE_STATUS_RXMAC_BUSY) /* MDIO Control Register */ #define REG_MDIO_CTRL 0x1414 #define MDIO_CTRL_MODE_EXT BIT(30) #define MDIO_CTRL_POST_READ BIT(29) #define MDIO_CTRL_AP_EN BIT(28) #define MDIO_CTRL_BUSY BIT(27) #define MDIO_CTRL_CLK_SEL_MASK 0x7UL #define MDIO_CTRL_CLK_SEL_SHIFT 24 #define MDIO_CTRL_CLK_25_4 0 /* 25MHz divide 4 */ #define MDIO_CTRL_CLK_25_6 2 #define MDIO_CTRL_CLK_25_8 3 #define MDIO_CTRL_CLK_25_10 4 #define MDIO_CTRL_CLK_25_32 5 #define MDIO_CTRL_CLK_25_64 6 #define MDIO_CTRL_CLK_25_128 7 #define MDIO_CTRL_START BIT(23) #define MDIO_CTRL_SPRES_PRMBL BIT(22) #define MDIO_CTRL_OP_READ BIT(21) /* 1:read, 0:write */ #define MDIO_CTRL_REG_MASK 0x1FUL #define MDIO_CTRL_REG_SHIFT 16 #define MDIO_CTRL_DATA_MASK 0xFFFFUL #define MDIO_CTRL_DATA_SHIFT 0 #define MDIO_MAX_AC_TO 120 /* 1.2ms timeout for slow clk */ /* for extension reg access */ #define REG_MDIO_EXTN 0x1448 #define MDIO_EXTN_PORTAD_MASK 0x1FUL #define MDIO_EXTN_PORTAD_SHIFT 21 #define MDIO_EXTN_DEVAD_MASK 0x1FUL #define MDIO_EXTN_DEVAD_SHIFT 16 #define MDIO_EXTN_REG_MASK 0xFFFFUL #define MDIO_EXTN_REG_SHIFT 0 /* BIST Control and Status Register0 (for the Packet Memory) */ #define REG_BIST0_CTRL 0x141c #define BIST0_NOW 0x1 #define BIST0_SRAM_FAIL 0x2 /* 1: The SRAM failure is * un-repairable because * it has address decoder * failure or more than 1 cell * stuck-to-x failure */ #define BIST0_FUSE_FLAG 0x4 /* BIST Control and Status Register1(for the retry buffer of PCI Express) */ #define REG_BIST1_CTRL 0x1420 #define BIST1_NOW 0x1 #define BIST1_SRAM_FAIL 0x2 #define BIST1_FUSE_FLAG 0x4 /* SerDes Lock Detect Control and Status Register */ #define REG_SERDES 0x1424 #define SERDES_PHY_CLK_SLOWDOWN BIT(18) #define SERDES_MAC_CLK_SLOWDOWN BIT(17) #define SERDES_SELFB_PLL_MASK 0x3UL #define SERDES_SELFB_PLL_SHIFT 14 #define SERDES_PHYCLK_SEL_GTX BIT(13) /* 1:gtx_clk, 0:25M */ #define SERDES_PCIECLK_SEL_SRDS BIT(12) /* 1:serdes,0:25M */ #define SERDES_BUFS_RX_EN BIT(11) #define SERDES_PD_RX BIT(10) #define SERDES_PLL_EN BIT(9) #define SERDES_EN BIT(8) #define SERDES_SELFB_PLL_SEL_CSR BIT(6) /* 0:state-machine,1:csr */ #define SERDES_SELFB_PLL_CSR_MASK 0x3UL #define SERDES_SELFB_PLL_CSR_SHIFT 4 #define SERDES_SELFB_PLL_CSR_4 3 /* 4-12% OV-CLK */ #define SERDES_SELFB_PLL_CSR_0 2 /* 0-4% OV-CLK */ #define SERDES_SELFB_PLL_CSR_12 1 /* 12-18% OV-CLK */ #define SERDES_SELFB_PLL_CSR_18 0 /* 18-25% OV-CLK */ #define SERDES_VCO_SLOW BIT(3) #define SERDES_VCO_FAST BIT(2) #define SERDES_LOCK_DETECT_EN BIT(1) #define SERDES_LOCK_DETECT BIT(0) #define REG_LPI_DECISN_TIMER 0x143C #define L2CB_LPI_DESISN_TIMER 0x7D00 #define REG_LPI_CTRL 0x1440 #define LPI_CTRL_CHK_DA BIT(31) #define LPI_CTRL_ENH_TO_MASK 0x1FFFUL #define LPI_CTRL_ENH_TO_SHIFT 12 #define LPI_CTRL_ENH_TH_MASK 0x1FUL #define LPI_CTRL_ENH_TH_SHIFT 6 #define LPI_CTRL_ENH_EN BIT(5) #define LPI_CTRL_CHK_RX BIT(4) #define LPI_CTRL_CHK_STATE BIT(3) #define LPI_CTRL_GMII BIT(2) #define LPI_CTRL_TO_PHY BIT(1) #define LPI_CTRL_EN BIT(0) #define REG_LPI_WAIT 0x1444 #define LPI_WAIT_TIMER_MASK 0xFFFFUL #define LPI_WAIT_TIMER_SHIFT 0 /* MAC Control Register */ #define REG_MAC_CTRL 0x1480 #define MAC_CTRL_SPEED_MODE_SW BIT(30) /* 0:phy,1:sw */ #define MAC_CTRL_HASH_ALG_CRC32 BIT(29) /* 1:legacy,0:lw_5b */ #define MAC_CTRL_SINGLE_PAUSE_EN BIT(28) #define MAC_CTRL_DBG BIT(27) #define MAC_CTRL_BC_EN BIT(26) #define MAC_CTRL_MC_ALL_EN BIT(25) #define MAC_CTRL_RX_CHKSUM_EN BIT(24) #define MAC_CTRL_TX_HUGE BIT(23) #define MAC_CTRL_DBG_TX_BKPRESURE BIT(22) #define MAC_CTRL_SPEED_MASK 3UL #define MAC_CTRL_SPEED_SHIFT 20 #define MAC_CTRL_SPEED_10_100 1 #define MAC_CTRL_SPEED_1000 2 #define MAC_CTRL_TX_SIMURST BIT(19) #define MAC_CTRL_SCNT BIT(17) #define MAC_CTRL_TX_PAUSE BIT(16) #define MAC_CTRL_PROMIS_EN BIT(15) #define MAC_CTRL_RMV_VLAN BIT(14) #define MAC_CTRL_PRMLEN_MASK 0xFUL #define MAC_CTRL_PRMLEN_SHIFT 10 #define MAC_CTRL_HUGE_EN BIT(9) #define MAC_CTRL_LENCHK BIT(8) #define MAC_CTRL_PAD BIT(7) #define MAC_CTRL_ADD_CRC BIT(6) #define MAC_CTRL_DUPLX BIT(5) #define MAC_CTRL_LOOPBACK BIT(4) #define MAC_CTRL_RX_FLOW BIT(3) #define MAC_CTRL_TX_FLOW BIT(2) #define MAC_CTRL_RX_EN BIT(1) #define MAC_CTRL_TX_EN BIT(0) /* MAC IPG/IFG Control Register */ #define REG_MAC_IPG_IFG 0x1484 #define MAC_IPG_IFG_IPGT_SHIFT 0 /* Desired back to back * inter-packet gap. The * default is 96-bit time */ #define MAC_IPG_IFG_IPGT_MASK 0x7f #define MAC_IPG_IFG_MIFG_SHIFT 8 /* Minimum number of IFG to * enforce in between RX frames */ #define MAC_IPG_IFG_MIFG_MASK 0xff /* Frame gap below such IFP is dropped */ #define MAC_IPG_IFG_IPGR1_SHIFT 16 /* 64bit Carrier-Sense window */ #define MAC_IPG_IFG_IPGR1_MASK 0x7f #define MAC_IPG_IFG_IPGR2_SHIFT 24 /* 96-bit IPG window */ #define MAC_IPG_IFG_IPGR2_MASK 0x7f /* MAC STATION ADDRESS */ #define REG_MAC_STA_ADDR 0x1488 /* Hash table for multicast address */ #define REG_RX_HASH_TABLE 0x1490 /* MAC Half-Duplex Control Register */ #define REG_MAC_HALF_DUPLX_CTRL 0x1498 #define MAC_HALF_DUPLX_CTRL_LCOL_SHIFT 0 /* Collision Window */ #define MAC_HALF_DUPLX_CTRL_LCOL_MASK 0x3ff #define MAC_HALF_DUPLX_CTRL_RETRY_SHIFT 12 #define MAC_HALF_DUPLX_CTRL_RETRY_MASK 0xf #define MAC_HALF_DUPLX_CTRL_EXC_DEF_EN 0x10000 #define MAC_HALF_DUPLX_CTRL_NO_BACK_C 0x20000 #define MAC_HALF_DUPLX_CTRL_NO_BACK_P 0x40000 /* No back-off on backpressure, * immediately start the * transmission after back pressure */ #define MAC_HALF_DUPLX_CTRL_ABEBE 0x80000 /* 1: Alternative Binary Exponential Back-off Enabled */ #define MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT 20 /* Maximum binary exponential number */ #define MAC_HALF_DUPLX_CTRL_ABEBT_MASK 0xf #define MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT 24 /* IPG to start JAM for collision based flow control in half-duplex */ #define MAC_HALF_DUPLX_CTRL_JAMIPG_MASK 0xf /* mode. In unit of 8-bit time */ /* Maximum Frame Length Control Register */ #define REG_MTU 0x149c /* Wake-On-Lan control register */ #define REG_WOL_CTRL 0x14a0 #define WOL_PT7_MATCH BIT(31) #define WOL_PT6_MATCH BIT(30) #define WOL_PT5_MATCH BIT(29) #define WOL_PT4_MATCH BIT(28) #define WOL_PT3_MATCH BIT(27) #define WOL_PT2_MATCH BIT(26) #define WOL_PT1_MATCH BIT(25) #define WOL_PT0_MATCH BIT(24) #define WOL_PT7_EN BIT(23) #define WOL_PT6_EN BIT(22) #define WOL_PT5_EN BIT(21) #define WOL_PT4_EN BIT(20) #define WOL_PT3_EN BIT(19) #define WOL_PT2_EN BIT(18) #define WOL_PT1_EN BIT(17) #define WOL_PT0_EN BIT(16) #define WOL_LNKCHG_ST BIT(10) #define WOL_MAGIC_ST BIT(9) #define WOL_PATTERN_ST BIT(8) #define WOL_OOB_EN BIT(6) #define WOL_LINK_CHG_PME_EN BIT(5) #define WOL_LINK_CHG_EN BIT(4) #define WOL_MAGIC_PME_EN BIT(3) #define WOL_MAGIC_EN BIT(2) #define WOL_PATTERN_PME_EN BIT(1) #define WOL_PATTERN_EN BIT(0) /* WOL Length ( 2 DWORD ) */ #define REG_WOL_PTLEN1 0x14A4 #define WOL_PTLEN1_3_MASK 0xFFUL #define WOL_PTLEN1_3_SHIFT 24 #define WOL_PTLEN1_2_MASK 0xFFUL #define WOL_PTLEN1_2_SHIFT 16 #define WOL_PTLEN1_1_MASK 0xFFUL #define WOL_PTLEN1_1_SHIFT 8 #define WOL_PTLEN1_0_MASK 0xFFUL #define WOL_PTLEN1_0_SHIFT 0 #define REG_WOL_PTLEN2 0x14A8 #define WOL_PTLEN2_7_MASK 0xFFUL #define WOL_PTLEN2_7_SHIFT 24 #define WOL_PTLEN2_6_MASK 0xFFUL #define WOL_PTLEN2_6_SHIFT 16 #define WOL_PTLEN2_5_MASK 0xFFUL #define WOL_PTLEN2_5_SHIFT 8 #define WOL_PTLEN2_4_MASK 0xFFUL #define WOL_PTLEN2_4_SHIFT 0 /* Internal SRAM Partition Register */ #define RFDX_HEAD_ADDR_MASK 0x03FF #define RFDX_HARD_ADDR_SHIFT 0 #define RFDX_TAIL_ADDR_MASK 0x03FF #define RFDX_TAIL_ADDR_SHIFT 16 #define REG_SRAM_RFD0_INFO 0x1500 #define REG_SRAM_RFD1_INFO 0x1504 #define REG_SRAM_RFD2_INFO 0x1508 #define REG_SRAM_RFD3_INFO 0x150C #define REG_RFD_NIC_LEN 0x1510 /* In 8-bytes */ #define RFD_NIC_LEN_MASK 0x03FF #define REG_SRAM_TRD_ADDR 0x1518 #define TPD_HEAD_ADDR_MASK 0x03FF #define TPD_HEAD_ADDR_SHIFT 0 #define TPD_TAIL_ADDR_MASK 0x03FF #define TPD_TAIL_ADDR_SHIFT 16 #define REG_SRAM_TRD_LEN 0x151C /* In 8-bytes */ #define TPD_NIC_LEN_MASK 0x03FF #define REG_SRAM_RXF_ADDR 0x1520 #define REG_SRAM_RXF_LEN 0x1524 #define REG_SRAM_TXF_ADDR 0x1528 #define REG_SRAM_TXF_LEN 0x152C #define REG_SRAM_TCPH_ADDR 0x1530 #define REG_SRAM_PKTH_ADDR 0x1532 /* * Load Ptr Register * Software sets this bit after the initialization of the head and tail */ #define REG_LOAD_PTR 0x1534 /* * addresses of all descriptors, as well as the following descriptor * control register, which triggers each function block to load the head * pointer to prepare for the operation. This bit is then self-cleared * after one cycle. */ #define REG_RX_BASE_ADDR_HI 0x1540 #define REG_TX_BASE_ADDR_HI 0x1544 #define REG_RFD0_HEAD_ADDR_LO 0x1550 #define REG_RFD_RING_SIZE 0x1560 #define RFD_RING_SIZE_MASK 0x0FFF #define REG_RX_BUF_SIZE 0x1564 #define RX_BUF_SIZE_MASK 0xFFFF #define REG_RRD0_HEAD_ADDR_LO 0x1568 #define REG_RRD_RING_SIZE 0x1578 #define RRD_RING_SIZE_MASK 0x0FFF #define REG_TPD_PRI1_ADDR_LO 0x157C #define REG_TPD_PRI0_ADDR_LO 0x1580 #define REG_TPD_RING_SIZE 0x1584 #define TPD_RING_SIZE_MASK 0xFFFF /* TXQ Control Register */ #define REG_TXQ_CTRL 0x1590 #define TXQ_TXF_BURST_NUM_MASK 0xFFFFUL #define TXQ_TXF_BURST_NUM_SHIFT 16 #define L1C_TXQ_TXF_BURST_PREF 0x200 #define L2CB_TXQ_TXF_BURST_PREF 0x40 #define TXQ_CTRL_PEDING_CLR BIT(8) #define TXQ_CTRL_LS_8023_EN BIT(7) #define TXQ_CTRL_ENH_MODE BIT(6) #define TXQ_CTRL_EN BIT(5) #define TXQ_CTRL_IP_OPTION_EN BIT(4) #define TXQ_NUM_TPD_BURST_MASK 0xFUL #define TXQ_NUM_TPD_BURST_SHIFT 0 #define TXQ_NUM_TPD_BURST_DEF 5 #define TXQ_CFGV (\ FIELDX(TXQ_NUM_TPD_BURST, TXQ_NUM_TPD_BURST_DEF) |\ TXQ_CTRL_ENH_MODE |\ TXQ_CTRL_LS_8023_EN |\ TXQ_CTRL_IP_OPTION_EN) #define L1C_TXQ_CFGV (\ TXQ_CFGV |\ FIELDX(TXQ_TXF_BURST_NUM, L1C_TXQ_TXF_BURST_PREF)) #define L2CB_TXQ_CFGV (\ TXQ_CFGV |\ FIELDX(TXQ_TXF_BURST_NUM, L2CB_TXQ_TXF_BURST_PREF)) /* Jumbo packet Threshold for task offload */ #define REG_TX_TSO_OFFLOAD_THRESH 0x1594 /* In 8-bytes */ #define TX_TSO_OFFLOAD_THRESH_MASK 0x07FF #define MAX_TSO_FRAME_SIZE (7*1024) #define REG_TXF_WATER_MARK 0x1598 /* In 8-bytes */ #define TXF_WATER_MARK_MASK 0x0FFF #define TXF_LOW_WATER_MARK_SHIFT 0 #define TXF_HIGH_WATER_MARK_SHIFT 16 #define TXQ_CTRL_BURST_MODE_EN 0x80000000 #define REG_THRUPUT_MON_CTRL 0x159C #define THRUPUT_MON_RATE_MASK 0x3 #define THRUPUT_MON_RATE_SHIFT 0 #define THRUPUT_MON_EN 0x80 /* RXQ Control Register */ #define REG_RXQ_CTRL 0x15A0 #define ASPM_THRUPUT_LIMIT_MASK 0x3 #define ASPM_THRUPUT_LIMIT_SHIFT 0 #define ASPM_THRUPUT_LIMIT_NO 0x00 #define ASPM_THRUPUT_LIMIT_1M 0x01 #define ASPM_THRUPUT_LIMIT_10M 0x02 #define ASPM_THRUPUT_LIMIT_100M 0x03 #define IPV6_CHKSUM_CTRL_EN BIT(7) #define RXQ_RFD_BURST_NUM_MASK 0x003F #define RXQ_RFD_BURST_NUM_SHIFT 20 #define RXQ_NUM_RFD_PREF_DEF 8 #define RSS_MODE_MASK 3UL #define RSS_MODE_SHIFT 26 #define RSS_MODE_DIS 0 #define RSS_MODE_SQSI 1 #define RSS_MODE_MQSI 2 #define RSS_MODE_MQMI 3 #define RSS_NIP_QUEUE_SEL BIT(28) /* 0:q0, 1:table */ #define RRS_HASH_CTRL_EN BIT(29) #define RX_CUT_THRU_EN BIT(30) #define RXQ_CTRL_EN BIT(31) #define REG_RFD_FREE_THRESH 0x15A4 #define RFD_FREE_THRESH_MASK 0x003F #define RFD_FREE_HI_THRESH_SHIFT 0 #define RFD_FREE_LO_THRESH_SHIFT 6 /* RXF flow control register */ #define REG_RXQ_RXF_PAUSE_THRESH 0x15A8 #define RXQ_RXF_PAUSE_TH_HI_SHIFT 0 #define RXQ_RXF_PAUSE_TH_HI_MASK 0x0FFF #define RXQ_RXF_PAUSE_TH_LO_SHIFT 16 #define RXQ_RXF_PAUSE_TH_LO_MASK 0x0FFF #define REG_RXD_DMA_CTRL 0x15AC #define RXD_DMA_THRESH_MASK 0x0FFF /* In 8-bytes */ #define RXD_DMA_THRESH_SHIFT 0 #define RXD_DMA_DOWN_TIMER_MASK 0xFFFF #define RXD_DMA_DOWN_TIMER_SHIFT 16 /* DMA Engine Control Register */ #define REG_DMA_CTRL 0x15C0 #define DMA_CTRL_SMB_NOW BIT(31) #define DMA_CTRL_WPEND_CLR BIT(30) #define DMA_CTRL_RPEND_CLR BIT(29) #define DMA_CTRL_WDLY_CNT_MASK 0xFUL #define DMA_CTRL_WDLY_CNT_SHIFT 16 #define DMA_CTRL_WDLY_CNT_DEF 4 #define DMA_CTRL_RDLY_CNT_MASK 0x1FUL #define DMA_CTRL_RDLY_CNT_SHIFT 11 #define DMA_CTRL_RDLY_CNT_DEF 15 #define DMA_CTRL_RREQ_PRI_DATA BIT(10) /* 0:tpd, 1:data */ #define DMA_CTRL_WREQ_BLEN_MASK 7UL #define DMA_CTRL_WREQ_BLEN_SHIFT 7 #define DMA_CTRL_RREQ_BLEN_MASK 7UL #define DMA_CTRL_RREQ_BLEN_SHIFT 4 #define L1C_CTRL_DMA_RCB_LEN128 BIT(3) /* 0:64bytes,1:128bytes */ #define DMA_CTRL_RORDER_MODE_MASK 7UL #define DMA_CTRL_RORDER_MODE_SHIFT 0 #define DMA_CTRL_RORDER_MODE_OUT 4 #define DMA_CTRL_RORDER_MODE_ENHANCE 2 #define DMA_CTRL_RORDER_MODE_IN 1 /* INT-triggle/SMB Control Register */ #define REG_SMB_STAT_TIMER 0x15C4 /* 2us resolution */ #define SMB_STAT_TIMER_MASK 0xFFFFFF #define REG_TINT_TPD_THRESH 0x15C8 /* tpd th to trig intrrupt */ /* Mail box */ #define MB_RFDX_PROD_IDX_MASK 0xFFFF #define REG_MB_RFD0_PROD_IDX 0x15E0 #define REG_TPD_PRI1_PIDX 0x15F0 /* 16bit,hi-tpd producer idx */ #define REG_TPD_PRI0_PIDX 0x15F2 /* 16bit,lo-tpd producer idx */ #define REG_TPD_PRI1_CIDX 0x15F4 /* 16bit,hi-tpd consumer idx */ #define REG_TPD_PRI0_CIDX 0x15F6 /* 16bit,lo-tpd consumer idx */ #define REG_MB_RFD01_CONS_IDX 0x15F8 #define MB_RFD0_CONS_IDX_MASK 0x0000FFFF #define MB_RFD1_CONS_IDX_MASK 0xFFFF0000 /* Interrupt Status Register */ #define REG_ISR 0x1600 #define ISR_SMB 0x00000001 #define ISR_TIMER 0x00000002 /* * Software manual interrupt, for debug. Set when SW_MAN_INT_EN is set * in Table 51 Selene Master Control Register (Offset 0x1400). */ #define ISR_MANUAL 0x00000004 #define ISR_HW_RXF_OV 0x00000008 /* RXF overflow interrupt */ #define ISR_RFD0_UR 0x00000010 /* RFD0 under run */ #define ISR_RFD1_UR 0x00000020 #define ISR_RFD2_UR 0x00000040 #define ISR_RFD3_UR 0x00000080 #define ISR_TXF_UR 0x00000100 #define ISR_DMAR_TO_RST 0x00000200 #define ISR_DMAW_TO_RST 0x00000400 #define ISR_TX_CREDIT 0x00000800 #define ISR_GPHY 0x00001000 /* GPHY low power state interrupt */ #define ISR_GPHY_LPW 0x00002000 #define ISR_TXQ_TO_RST 0x00004000 #define ISR_TX_PKT 0x00008000 #define ISR_RX_PKT_0 0x00010000 #define ISR_RX_PKT_1 0x00020000 #define ISR_RX_PKT_2 0x00040000 #define ISR_RX_PKT_3 0x00080000 #define ISR_MAC_RX 0x00100000 #define ISR_MAC_TX 0x00200000 #define ISR_UR_DETECTED 0x00400000 #define ISR_FERR_DETECTED 0x00800000 #define ISR_NFERR_DETECTED 0x01000000 #define ISR_CERR_DETECTED 0x02000000 #define ISR_PHY_LINKDOWN 0x04000000 #define ISR_DIS_INT 0x80000000 /* Interrupt Mask Register */ #define REG_IMR 0x1604 #define IMR_NORMAL_MASK (\ ISR_MANUAL |\ ISR_HW_RXF_OV |\ ISR_RFD0_UR |\ ISR_TXF_UR |\ ISR_DMAR_TO_RST |\ ISR_TXQ_TO_RST |\ ISR_DMAW_TO_RST |\ ISR_GPHY |\ ISR_TX_PKT |\ ISR_RX_PKT_0 |\ ISR_GPHY_LPW |\ ISR_PHY_LINKDOWN) #define ISR_RX_PKT (\ ISR_RX_PKT_0 |\ ISR_RX_PKT_1 |\ ISR_RX_PKT_2 |\ ISR_RX_PKT_3) #define ISR_OVER (\ ISR_RFD0_UR |\ ISR_RFD1_UR |\ ISR_RFD2_UR |\ ISR_RFD3_UR |\ ISR_HW_RXF_OV |\ ISR_TXF_UR) #define ISR_ERROR (\ ISR_DMAR_TO_RST |\ ISR_TXQ_TO_RST |\ ISR_DMAW_TO_RST |\ ISR_PHY_LINKDOWN) #define REG_INT_RETRIG_TIMER 0x1608 #define INT_RETRIG_TIMER_MASK 0xFFFF #define REG_MAC_RX_STATUS_BIN 0x1700 #define REG_MAC_RX_STATUS_END 0x175c #define REG_MAC_TX_STATUS_BIN 0x1760 #define REG_MAC_TX_STATUS_END 0x17c0 #define REG_CLK_GATING_CTRL 0x1814 #define CLK_GATING_DMAW_EN 0x0001 #define CLK_GATING_DMAR_EN 0x0002 #define CLK_GATING_TXQ_EN 0x0004 #define CLK_GATING_RXQ_EN 0x0008 #define CLK_GATING_TXMAC_EN 0x0010 #define CLK_GATING_RXMAC_EN 0x0020 #define CLK_GATING_EN_ALL (CLK_GATING_DMAW_EN |\ CLK_GATING_DMAR_EN |\ CLK_GATING_TXQ_EN |\ CLK_GATING_RXQ_EN |\ CLK_GATING_TXMAC_EN|\ CLK_GATING_RXMAC_EN) /* DEBUG ADDR */ #define REG_DEBUG_DATA0 0x1900 #define REG_DEBUG_DATA1 0x1904 #define L1D_MPW_PHYID1 0xD01C /* V7 */ #define L1D_MPW_PHYID2 0xD01D /* V1-V6 */ #define L1D_MPW_PHYID3 0xD01E /* V8 */ /* Autoneg Advertisement Register */ #define ADVERTISE_DEFAULT_CAP \ (ADVERTISE_ALL | ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM) /* 1000BASE-T Control Register */ #define GIGA_CR_1000T_REPEATER_DTE 0x0400 /* 1=Repeater/switch device port 0=DTE device */ #define GIGA_CR_1000T_MS_VALUE 0x0800 /* 1=Configure PHY as Master 0=Configure PHY as Slave */ #define GIGA_CR_1000T_MS_ENABLE 0x1000 /* 1=Master/Slave manual config value 0=Automatic Master/Slave config */ #define GIGA_CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ #define GIGA_CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ #define GIGA_CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ #define GIGA_CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ #define GIGA_CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ #define GIGA_CR_1000T_SPEED_MASK 0x0300 #define GIGA_CR_1000T_DEFAULT_CAP 0x0300 /* PHY Specific Status Register */ #define MII_GIGA_PSSR 0x11 #define GIGA_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ #define GIGA_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ #define GIGA_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ #define GIGA_PSSR_10MBS 0x0000 /* 00=10Mbs */ #define GIGA_PSSR_100MBS 0x4000 /* 01=100Mbs */ #define GIGA_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ /* PHY Interrupt Enable Register */ #define MII_IER 0x12 #define IER_LINK_UP 0x0400 #define IER_LINK_DOWN 0x0800 /* PHY Interrupt Status Register */ #define MII_ISR 0x13 #define ISR_LINK_UP 0x0400 #define ISR_LINK_DOWN 0x0800 /* Cable-Detect-Test Control Register */ #define MII_CDTC 0x16 #define CDTC_EN_OFF 0 /* sc */ #define CDTC_EN_BITS 1 #define CDTC_PAIR_OFF 8 #define CDTC_PAIR_BIT 2 /* Cable-Detect-Test Status Register */ #define MII_CDTS 0x1C #define CDTS_STATUS_OFF 8 #define CDTS_STATUS_BITS 2 #define CDTS_STATUS_NORMAL 0 #define CDTS_STATUS_SHORT 1 #define CDTS_STATUS_OPEN 2 #define CDTS_STATUS_INVALID 3 #define MII_DBG_ADDR 0x1D #define MII_DBG_DATA 0x1E /***************************** debug port *************************************/ #define MIIDBG_ANACTRL 0x00 #define ANACTRL_CLK125M_DELAY_EN 0x8000 #define ANACTRL_VCO_FAST 0x4000 #define ANACTRL_VCO_SLOW 0x2000 #define ANACTRL_AFE_MODE_EN 0x1000 #define ANACTRL_LCKDET_PHY 0x800 #define ANACTRL_LCKDET_EN 0x400 #define ANACTRL_OEN_125M 0x200 #define ANACTRL_HBIAS_EN 0x100 #define ANACTRL_HB_EN 0x80 #define ANACTRL_SEL_HSP 0x40 #define ANACTRL_CLASSA_EN 0x20 #define ANACTRL_MANUSWON_SWR_MASK 3U #define ANACTRL_MANUSWON_SWR_SHIFT 2 #define ANACTRL_MANUSWON_SWR_2V 0 #define ANACTRL_MANUSWON_SWR_1P9V 1 #define ANACTRL_MANUSWON_SWR_1P8V 2 #define ANACTRL_MANUSWON_SWR_1P7V 3 #define ANACTRL_MANUSWON_BW3_4M 0x2 #define ANACTRL_RESTART_CAL 0x1 #define ANACTRL_DEF 0x02EF #define MIIDBG_SYSMODCTRL 0x04 #define SYSMODCTRL_IECHOADJ_PFMH_PHY 0x8000 #define SYSMODCTRL_IECHOADJ_BIASGEN 0x4000 #define SYSMODCTRL_IECHOADJ_PFML_PHY 0x2000 #define SYSMODCTRL_IECHOADJ_PS_MASK 3U #define SYSMODCTRL_IECHOADJ_PS_SHIFT 10 #define SYSMODCTRL_IECHOADJ_PS_40 3 #define SYSMODCTRL_IECHOADJ_PS_20 2 #define SYSMODCTRL_IECHOADJ_PS_0 1 #define SYSMODCTRL_IECHOADJ_10BT_100MV 0x40 /* 1:100mv, 0:200mv */ #define SYSMODCTRL_IECHOADJ_HLFAP_MASK 3U #define SYSMODCTRL_IECHOADJ_HLFAP_SHIFT 4 #define SYSMODCTRL_IECHOADJ_VDFULBW 0x8 #define SYSMODCTRL_IECHOADJ_VDBIASHLF 0x4 #define SYSMODCTRL_IECHOADJ_VDAMPHLF 0x2 #define SYSMODCTRL_IECHOADJ_VDLANSW 0x1 #define SYSMODCTRL_IECHOADJ_DEF 0x88BB /* ???? */ /* for l1d & l2cb */ #define SYSMODCTRL_IECHOADJ_CUR_ADD 0x8000 #define SYSMODCTRL_IECHOADJ_CUR_MASK 7U #define SYSMODCTRL_IECHOADJ_CUR_SHIFT 12 #define SYSMODCTRL_IECHOADJ_VOL_MASK 0xFU #define SYSMODCTRL_IECHOADJ_VOL_SHIFT 8 #define SYSMODCTRL_IECHOADJ_VOL_17ALL 3 #define SYSMODCTRL_IECHOADJ_VOL_100M15 1 #define SYSMODCTRL_IECHOADJ_VOL_10M17 0 #define SYSMODCTRL_IECHOADJ_BIAS1_MASK 0xFU #define SYSMODCTRL_IECHOADJ_BIAS1_SHIFT 4 #define SYSMODCTRL_IECHOADJ_BIAS2_MASK 0xFU #define SYSMODCTRL_IECHOADJ_BIAS2_SHIFT 0 #define L1D_SYSMODCTRL_IECHOADJ_DEF 0x4FBB #define MIIDBG_SRDSYSMOD 0x05 #define SRDSYSMOD_LCKDET_EN 0x2000 #define SRDSYSMOD_PLL_EN 0x800 #define SRDSYSMOD_SEL_HSP 0x400 #define SRDSYSMOD_HLFTXDR 0x200 #define SRDSYSMOD_TXCLK_DELAY_EN 0x100 #define SRDSYSMOD_TXELECIDLE 0x80 #define SRDSYSMOD_DEEMP_EN 0x40 #define SRDSYSMOD_MS_PAD 0x4 #define SRDSYSMOD_CDR_ADC_VLTG 0x2 #define SRDSYSMOD_CDR_DAC_1MA 0x1 #define SRDSYSMOD_DEF 0x2C46 #define MIIDBG_CFGLPSPD 0x0A #define CFGLPSPD_RSTCNT_MASK 3U #define CFGLPSPD_RSTCNT_SHIFT 14 #define CFGLPSPD_RSTCNT_CLK125SW 0x2000 #define MIIDBG_HIBNEG 0x0B #define HIBNEG_PSHIB_EN 0x8000 #define HIBNEG_WAKE_BOTH 0x4000 #define HIBNEG_ONOFF_ANACHG_SUDEN 0x2000 #define HIBNEG_HIB_PULSE 0x1000 #define HIBNEG_GATE_25M_EN 0x800 #define HIBNEG_RST_80U 0x400 #define HIBNEG_RST_TIMER_MASK 3U #define HIBNEG_RST_TIMER_SHIFT 8 #define HIBNEG_GTX_CLK_DELAY_MASK 3U #define HIBNEG_GTX_CLK_DELAY_SHIFT 5 #define HIBNEG_BYPSS_BRKTIMER 0x10 #define HIBNEG_DEF 0xBC40 #define MIIDBG_TST10BTCFG 0x12 #define TST10BTCFG_INTV_TIMER_MASK 3U #define TST10BTCFG_INTV_TIMER_SHIFT 14 #define TST10BTCFG_TRIGER_TIMER_MASK 3U #define TST10BTCFG_TRIGER_TIMER_SHIFT 12 #define TST10BTCFG_DIV_MAN_MLT3_EN 0x800 #define TST10BTCFG_OFF_DAC_IDLE 0x400 #define TST10BTCFG_LPBK_DEEP 0x4 /* 1:deep,0:shallow */ #define TST10BTCFG_DEF 0x4C04 #define MIIDBG_AZ_ANADECT 0x15 #define AZ_ANADECT_10BTRX_TH 0x8000 #define AZ_ANADECT_BOTH_01CHNL 0x4000 #define AZ_ANADECT_INTV_MASK 0x3FU #define AZ_ANADECT_INTV_SHIFT 8 #define AZ_ANADECT_THRESH_MASK 0xFU #define AZ_ANADECT_THRESH_SHIFT 4 #define AZ_ANADECT_CHNL_MASK 0xFU #define AZ_ANADECT_CHNL_SHIFT 0 #define AZ_ANADECT_DEF 0x3220 #define AZ_ANADECT_LONG 0xb210 #define MIIDBG_MSE16DB 0x18 /* l1d */ #define L1D_MSE16DB_UP 0x05EA #define L1D_MSE16DB_DOWN 0x02EA #define MIIDBG_LEGCYPS 0x29 #define LEGCYPS_EN 0x8000 #define LEGCYPS_DAC_AMP1000_MASK 7U #define LEGCYPS_DAC_AMP1000_SHIFT 12 #define LEGCYPS_DAC_AMP100_MASK 7U #define LEGCYPS_DAC_AMP100_SHIFT 9 #define LEGCYPS_DAC_AMP10_MASK 7U #define LEGCYPS_DAC_AMP10_SHIFT 6 #define LEGCYPS_UNPLUG_TIMER_MASK 7U #define LEGCYPS_UNPLUG_TIMER_SHIFT 3 #define LEGCYPS_UNPLUG_DECT_EN 0x4 #define LEGCYPS_ECNC_PS_EN 0x1 #define L1D_LEGCYPS_DEF 0x129D #define L1C_LEGCYPS_DEF 0x36DD #define MIIDBG_TST100BTCFG 0x36 #define TST100BTCFG_NORMAL_BW_EN 0x8000 #define TST100BTCFG_BADLNK_BYPASS 0x4000 #define TST100BTCFG_SHORTCABL_TH_MASK 0x3FU #define TST100BTCFG_SHORTCABL_TH_SHIFT 8 #define TST100BTCFG_LITCH_EN 0x80 #define TST100BTCFG_VLT_SW 0x40 #define TST100BTCFG_LONGCABL_TH_MASK 0x3FU #define TST100BTCFG_LONGCABL_TH_SHIFT 0 #define TST100BTCFG_DEF 0xE12C #define MIIDBG_VOLT_CTRL 0x3B /* only for l2cb 1 & 2 */ #define VOLT_CTRL_CABLE1TH_MASK 0x1FFU #define VOLT_CTRL_CABLE1TH_SHIFT 7 #define VOLT_CTRL_AMPCTRL_MASK 3U #define VOLT_CTRL_AMPCTRL_SHIFT 5 #define VOLT_CTRL_SW_BYPASS 0x10 #define VOLT_CTRL_SWLOWEST 0x8 #define VOLT_CTRL_DACAMP10_MASK 7U #define VOLT_CTRL_DACAMP10_SHIFT 0 #define MIIDBG_CABLE1TH_DET 0x3E #define CABLE1TH_DET_EN 0x8000 /******* dev 3 *********/ #define MIIEXT_PCS 3 #define MIIEXT_CLDCTRL3 0x8003 #define CLDCTRL3_BP_CABLE1TH_DET_GT 0x8000 #define CLDCTRL3_AZ_DISAMP 0x1000 #define L2CB_CLDCTRL3 0x4D19 #define L1D_CLDCTRL3 0xDD19 #define MIIEXT_CLDCTRL6 0x8006 #define CLDCTRL6_CAB_LEN_MASK 0x1FFU #define CLDCTRL6_CAB_LEN_SHIFT 0 #define CLDCTRL6_CAB_LEN_SHORT 0x50 /********* dev 7 **********/ #define MIIEXT_ANEG 7 #define MIIEXT_LOCAL_EEEADV 0x3C #define LOCAL_EEEADV_1000BT 0x4 #define LOCAL_EEEADV_100BT 0x2 #define MIIEXT_REMOTE_EEEADV 0x3D #define REMOTE_EEEADV_1000BT 0x4 #define REMOTE_EEEADV_100BT 0x2 #define MIIEXT_EEE_ANEG 0x8000 #define EEE_ANEG_1000M 0x4 #define EEE_ANEG_100M 0x2 #endif /*_ATL1C_HW_H_*/