/* * Intel MIC Platform Software Stack (MPSS) * * Copyright(c) 2013 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License, version 2, as * published by the Free Software Foundation. * * This program is distributed in the hope that it will be useful, but * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * The full GNU General Public License is included in this distribution in * the file called "COPYING". * * Intel MIC Host driver. * */ #ifndef _MIC_DEVICE_H_ #define _MIC_DEVICE_H_ #include <linux/cdev.h> #include <linux/idr.h> #include <linux/notifier.h> #include "mic_intr.h" /* The maximum number of MIC devices supported in a single host system. */ #define MIC_MAX_NUM_DEVS 256 /** * enum mic_hw_family - The hardware family to which a device belongs. */ enum mic_hw_family { MIC_FAMILY_X100 = 0, MIC_FAMILY_UNKNOWN }; /** * enum mic_stepping - MIC stepping ids. */ enum mic_stepping { MIC_A0_STEP = 0x0, MIC_B0_STEP = 0x10, MIC_B1_STEP = 0x11, MIC_C0_STEP = 0x20, }; /** * struct mic_device - MIC device information for each card. * * @mmio: MMIO bar information. * @aper: Aperture bar information. * @family: The MIC family to which this device belongs. * @ops: MIC HW specific operations. * @id: The unique device id for this MIC device. * @stepping: Stepping ID. * @attr_group: Pointer to list of sysfs attribute groups. * @sdev: Device for sysfs entries. * @mic_mutex: Mutex for synchronizing access to mic_device. * @intr_ops: HW specific interrupt operations. * @smpt_ops: Hardware specific SMPT operations. * @smpt: MIC SMPT information. * @intr_info: H/W specific interrupt information. * @irq_info: The OS specific irq information * @dbg_dir: debugfs directory of this MIC device. * @cmdline: Kernel command line. * @firmware: Firmware file name. * @ramdisk: Ramdisk file name. * @bootmode: Boot mode i.e. "linux" or "elf" for flash updates. * @bootaddr: MIC boot address. * @reset_trigger_work: Work for triggering reset requests. * @shutdown_work: Work for handling shutdown interrupts. * @state: MIC state. * @shutdown_status: MIC status reported by card for shutdown/crashes. * @state_sysfs: Sysfs dirent for notifying ring 3 about MIC state changes. * @reset_wait: Waitqueue for sleeping while reset completes. * @log_buf_addr: Log buffer address for MIC. * @log_buf_len: Log buffer length address for MIC. * @dp: virtio device page * @dp_dma_addr: virtio device page DMA address. * @shutdown_db: shutdown doorbell. * @shutdown_cookie: shutdown cookie. * @cdev: Character device for MIC. * @vdev_list: list of virtio devices. * @pm_notifier: Handles PM notifications from the OS. */ struct mic_device { struct mic_mw mmio; struct mic_mw aper; enum mic_hw_family family; struct mic_hw_ops *ops; int id; enum mic_stepping stepping; const struct attribute_group **attr_group; struct device *sdev; struct mutex mic_mutex; struct mic_hw_intr_ops *intr_ops; struct mic_smpt_ops *smpt_ops; struct mic_smpt_info *smpt; struct mic_intr_info *intr_info; struct mic_irq_info irq_info; struct dentry *dbg_dir; char *cmdline; char *firmware; char *ramdisk; char *bootmode; u32 bootaddr; struct work_struct reset_trigger_work; struct work_struct shutdown_work; u8 state; u8 shutdown_status; struct kernfs_node *state_sysfs; struct completion reset_wait; void *log_buf_addr; int *log_buf_len; void *dp; dma_addr_t dp_dma_addr; int shutdown_db; struct mic_irq *shutdown_cookie; struct cdev cdev; struct list_head vdev_list; struct notifier_block pm_notifier; }; /** * struct mic_hw_ops - MIC HW specific operations. * @aper_bar: Aperture bar resource number. * @mmio_bar: MMIO bar resource number. * @read_spad: Read from scratch pad register. * @write_spad: Write to scratch pad register. * @send_intr: Send an interrupt for a particular doorbell on the card. * @ack_interrupt: Hardware specific operations to ack the h/w on * receipt of an interrupt. * @intr_workarounds: Hardware specific workarounds needed after * handling an interrupt. * @reset: Reset the remote processor. * @reset_fw_ready: Reset firmware ready field. * @is_fw_ready: Check if firmware is ready for OS download. * @send_firmware_intr: Send an interrupt to the card firmware. * @load_mic_fw: Load firmware segments required to boot the card * into card memory. This includes the kernel, command line, ramdisk etc. * @get_postcode: Get post code status from firmware. */ struct mic_hw_ops { u8 aper_bar; u8 mmio_bar; u32 (*read_spad)(struct mic_device *mdev, unsigned int idx); void (*write_spad)(struct mic_device *mdev, unsigned int idx, u32 val); void (*send_intr)(struct mic_device *mdev, int doorbell); u32 (*ack_interrupt)(struct mic_device *mdev); void (*intr_workarounds)(struct mic_device *mdev); void (*reset)(struct mic_device *mdev); void (*reset_fw_ready)(struct mic_device *mdev); bool (*is_fw_ready)(struct mic_device *mdev); void (*send_firmware_intr)(struct mic_device *mdev); int (*load_mic_fw)(struct mic_device *mdev, const char *buf); u32 (*get_postcode)(struct mic_device *mdev); }; /** * mic_mmio_read - read from an MMIO register. * @mw: MMIO register base virtual address. * @offset: register offset. * * RETURNS: register value. */ static inline u32 mic_mmio_read(struct mic_mw *mw, u32 offset) { return ioread32(mw->va + offset); } /** * mic_mmio_write - write to an MMIO register. * @mw: MMIO register base virtual address. * @val: the data value to put into the register * @offset: register offset. * * RETURNS: none. */ static inline void mic_mmio_write(struct mic_mw *mw, u32 val, u32 offset) { iowrite32(val, mw->va + offset); } void mic_sysfs_init(struct mic_device *mdev); int mic_start(struct mic_device *mdev, const char *buf); void mic_stop(struct mic_device *mdev, bool force); void mic_shutdown(struct mic_device *mdev); void mic_reset_delayed_work(struct work_struct *work); void mic_reset_trigger_work(struct work_struct *work); void mic_shutdown_work(struct work_struct *work); void mic_bootparam_init(struct mic_device *mdev); void mic_set_state(struct mic_device *mdev, u8 state); void mic_set_shutdown_status(struct mic_device *mdev, u8 status); void mic_create_debug_dir(struct mic_device *dev); void mic_delete_debug_dir(struct mic_device *dev); void __init mic_init_debugfs(void); void mic_exit_debugfs(void); void mic_prepare_suspend(struct mic_device *mdev); void mic_complete_resume(struct mic_device *mdev); void mic_suspend(struct mic_device *mdev); #endif