/* * Power key driver for SiRF PrimaII * * Copyright (c) 2013 Cambridge Silicon Radio Limited, a CSR plc group company. * * Licensed under GPLv2 or later. */ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/input.h> #include <linux/rtc/sirfsoc_rtciobrg.h> #include <linux/of.h> struct sirfsoc_pwrc_drvdata { u32 pwrc_base; struct input_dev *input; }; #define PWRC_ON_KEY_BIT (1 << 0) #define PWRC_INT_STATUS 0xc #define PWRC_INT_MASK 0x10 static irqreturn_t sirfsoc_pwrc_isr(int irq, void *dev_id) { struct sirfsoc_pwrc_drvdata *pwrcdrv = dev_id; u32 int_status; int_status = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base + PWRC_INT_STATUS); sirfsoc_rtc_iobrg_writel(int_status & ~PWRC_ON_KEY_BIT, pwrcdrv->pwrc_base + PWRC_INT_STATUS); /* * For a typical Linux system, we report KEY_SUSPEND to trigger apm-power.c * to queue a SUSPEND APM event */ input_event(pwrcdrv->input, EV_PWR, KEY_SUSPEND, 1); input_sync(pwrcdrv->input); /* * Todo: report KEY_POWER event for Android platforms, Android PowerManager * will handle the suspend and powerdown/hibernation */ return IRQ_HANDLED; } static const struct of_device_id sirfsoc_pwrc_of_match[] = { { .compatible = "sirf,prima2-pwrc" }, {}, } MODULE_DEVICE_TABLE(of, sirfsoc_pwrc_of_match); static int sirfsoc_pwrc_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct sirfsoc_pwrc_drvdata *pwrcdrv; int irq; int error; pwrcdrv = devm_kzalloc(&pdev->dev, sizeof(struct sirfsoc_pwrc_drvdata), GFP_KERNEL); if (!pwrcdrv) { dev_info(&pdev->dev, "Not enough memory for the device data\n"); return -ENOMEM; } /* * we can't use of_iomap because pwrc is not mapped in memory, * the so-called base address is only offset in rtciobrg */ error = of_property_read_u32(np, "reg", &pwrcdrv->pwrc_base); if (error) { dev_err(&pdev->dev, "unable to find base address of pwrc node in dtb\n"); return error; } pwrcdrv->input = devm_input_allocate_device(&pdev->dev); if (!pwrcdrv->input) return -ENOMEM; pwrcdrv->input->name = "sirfsoc pwrckey"; pwrcdrv->input->phys = "pwrc/input0"; pwrcdrv->input->evbit[0] = BIT_MASK(EV_PWR); irq = platform_get_irq(pdev, 0); error = devm_request_irq(&pdev->dev, irq, sirfsoc_pwrc_isr, IRQF_SHARED, "sirfsoc_pwrc_int", pwrcdrv); if (error) { dev_err(&pdev->dev, "unable to claim irq %d, error: %d\n", irq, error); return error; } sirfsoc_rtc_iobrg_writel( sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base + PWRC_INT_MASK) | PWRC_ON_KEY_BIT, pwrcdrv->pwrc_base + PWRC_INT_MASK); error = input_register_device(pwrcdrv->input); if (error) { dev_err(&pdev->dev, "unable to register input device, error: %d\n", error); return error; } platform_set_drvdata(pdev, pwrcdrv); device_init_wakeup(&pdev->dev, 1); return 0; } static int sirfsoc_pwrc_remove(struct platform_device *pdev) { device_init_wakeup(&pdev->dev, 0); return 0; } #ifdef CONFIG_PM_SLEEP static int pwrc_resume(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct sirfsoc_pwrc_drvdata *pwrcdrv = platform_get_drvdata(pdev); /* * Do not mask pwrc interrupt as we want pwrc work as a wakeup source * if users touch X_ONKEY_B, see arch/arm/mach-prima2/pm.c */ sirfsoc_rtc_iobrg_writel( sirfsoc_rtc_iobrg_readl( pwrcdrv->pwrc_base + PWRC_INT_MASK) | PWRC_ON_KEY_BIT, pwrcdrv->pwrc_base + PWRC_INT_MASK); return 0; } #endif static SIMPLE_DEV_PM_OPS(sirfsoc_pwrc_pm_ops, NULL, pwrc_resume); static struct platform_driver sirfsoc_pwrc_driver = { .probe = sirfsoc_pwrc_probe, .remove = sirfsoc_pwrc_remove, .driver = { .name = "sirfsoc-pwrc", .owner = THIS_MODULE, .pm = &sirfsoc_pwrc_pm_ops, .of_match_table = sirfsoc_pwrc_of_match, } }; module_platform_driver(sirfsoc_pwrc_driver); MODULE_LICENSE("GPLv2"); MODULE_AUTHOR("Binghua Duan <Binghua.Duan@csr.com>, Xianglong Du <Xianglong.Du@csr.com>"); MODULE_DESCRIPTION("CSR Prima2 PWRC Driver"); MODULE_ALIAS("platform:sirfsoc-pwrc");