/************************************************************************** * Copyright (c) 2009-2011, Intel Corporation. * All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice (including the next * paragraph) shall be included in all copies or substantial portions of the * Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE * SOFTWARE. * * Authors: * Benjamin Defnet <benjamin.r.defnet@intel.com> * Rajesh Poornachandran <rajesh.poornachandran@intel.com> * Massively reworked * Alan Cox <alan@linux.intel.com> */ #include "power.h" #include "psb_drv.h" #include "psb_reg.h" #include "psb_intel_reg.h" #include <linux/mutex.h> #include <linux/pm_runtime.h> static struct mutex power_mutex; /* Serialize power ops */ static spinlock_t power_ctrl_lock; /* Serialize power claim */ /** * gma_power_init - initialise power manager * @dev: our device * * Set up for power management tracking of our hardware. */ void gma_power_init(struct drm_device *dev) { struct drm_psb_private *dev_priv = dev->dev_private; /* FIXME: Move APM/OSPM base into relevant device code */ dev_priv->apm_base = dev_priv->apm_reg & 0xffff; dev_priv->ospm_base &= 0xffff; dev_priv->display_power = true; /* We start active */ dev_priv->display_count = 0; /* Currently no users */ dev_priv->suspended = false; /* And not suspended */ spin_lock_init(&power_ctrl_lock); mutex_init(&power_mutex); if (dev_priv->ops->init_pm) dev_priv->ops->init_pm(dev); } /** * gma_power_uninit - end power manager * @dev: device to end for * * Undo the effects of gma_power_init */ void gma_power_uninit(struct drm_device *dev) { pm_runtime_disable(&dev->pdev->dev); pm_runtime_set_suspended(&dev->pdev->dev); } /** * gma_suspend_display - suspend the display logic * @dev: our DRM device * * Suspend the display logic of the graphics interface */ static void gma_suspend_display(struct drm_device *dev) { struct drm_psb_private *dev_priv = dev->dev_private; if (dev_priv->suspended) return; dev_priv->ops->save_regs(dev); dev_priv->ops->power_down(dev); dev_priv->display_power = false; } /** * gma_resume_display - resume display side logic * * Resume the display hardware restoring state and enabling * as necessary. */ static void gma_resume_display(struct pci_dev *pdev) { struct drm_device *dev = pci_get_drvdata(pdev); struct drm_psb_private *dev_priv = dev->dev_private; /* turn on the display power island */ dev_priv->ops->power_up(dev); dev_priv->suspended = false; dev_priv->display_power = true; PSB_WVDC32(dev_priv->pge_ctl | _PSB_PGETBL_ENABLED, PSB_PGETBL_CTL); pci_write_config_word(pdev, PSB_GMCH_CTRL, dev_priv->gmch_ctrl | _PSB_GMCH_ENABLED); psb_gtt_restore(dev); /* Rebuild our GTT mappings */ dev_priv->ops->restore_regs(dev); } /** * gma_suspend_pci - suspend PCI side * @pdev: PCI device * * Perform the suspend processing on our PCI device state */ static void gma_suspend_pci(struct pci_dev *pdev) { struct drm_device *dev = pci_get_drvdata(pdev); struct drm_psb_private *dev_priv = dev->dev_private; int bsm, vbt; if (dev_priv->suspended) return; pci_save_state(pdev); pci_read_config_dword(pdev, 0x5C, &bsm); dev_priv->regs.saveBSM = bsm; pci_read_config_dword(pdev, 0xFC, &vbt); dev_priv->regs.saveVBT = vbt; pci_read_config_dword(pdev, PSB_PCIx_MSI_ADDR_LOC, &dev_priv->msi_addr); pci_read_config_dword(pdev, PSB_PCIx_MSI_DATA_LOC, &dev_priv->msi_data); pci_disable_device(pdev); pci_set_power_state(pdev, PCI_D3hot); dev_priv->suspended = true; } /** * gma_resume_pci - resume helper * @dev: our PCI device * * Perform the resume processing on our PCI device state - rewrite * register state and re-enable the PCI device */ static bool gma_resume_pci(struct pci_dev *pdev) { struct drm_device *dev = pci_get_drvdata(pdev); struct drm_psb_private *dev_priv = dev->dev_private; int ret; if (!dev_priv->suspended) return true; pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); pci_write_config_dword(pdev, 0x5c, dev_priv->regs.saveBSM); pci_write_config_dword(pdev, 0xFC, dev_priv->regs.saveVBT); /* restoring MSI address and data in PCIx space */ pci_write_config_dword(pdev, PSB_PCIx_MSI_ADDR_LOC, dev_priv->msi_addr); pci_write_config_dword(pdev, PSB_PCIx_MSI_DATA_LOC, dev_priv->msi_data); ret = pci_enable_device(pdev); if (ret != 0) dev_err(&pdev->dev, "pci_enable failed: %d\n", ret); else dev_priv->suspended = false; return !dev_priv->suspended; } /** * gma_power_suspend - bus callback for suspend * @pdev: our PCI device * @state: suspend type * * Called back by the PCI layer during a suspend of the system. We * perform the necessary shut down steps and save enough state that * we can undo this when resume is called. */ int gma_power_suspend(struct device *_dev) { struct pci_dev *pdev = container_of(_dev, struct pci_dev, dev); struct drm_device *dev = pci_get_drvdata(pdev); struct drm_psb_private *dev_priv = dev->dev_private; mutex_lock(&power_mutex); if (!dev_priv->suspended) { if (dev_priv->display_count) { mutex_unlock(&power_mutex); dev_err(dev->dev, "GPU hardware busy, cannot suspend\n"); return -EBUSY; } psb_irq_uninstall(dev); gma_suspend_display(dev); gma_suspend_pci(pdev); } mutex_unlock(&power_mutex); return 0; } /** * gma_power_resume - resume power * @pdev: PCI device * * Resume the PCI side of the graphics and then the displays */ int gma_power_resume(struct device *_dev) { struct pci_dev *pdev = container_of(_dev, struct pci_dev, dev); struct drm_device *dev = pci_get_drvdata(pdev); mutex_lock(&power_mutex); gma_resume_pci(pdev); gma_resume_display(pdev); psb_irq_preinstall(dev); psb_irq_postinstall(dev); mutex_unlock(&power_mutex); return 0; } /** * gma_power_is_on - returne true if power is on * @dev: our DRM device * * Returns true if the display island power is on at this moment */ bool gma_power_is_on(struct drm_device *dev) { struct drm_psb_private *dev_priv = dev->dev_private; return dev_priv->display_power; } /** * gma_power_begin - begin requiring power * @dev: our DRM device * @force_on: true to force power on * * Begin an action that requires the display power island is enabled. * We refcount the islands. */ bool gma_power_begin(struct drm_device *dev, bool force_on) { struct drm_psb_private *dev_priv = dev->dev_private; int ret; unsigned long flags; spin_lock_irqsave(&power_ctrl_lock, flags); /* Power already on ? */ if (dev_priv->display_power) { dev_priv->display_count++; pm_runtime_get(&dev->pdev->dev); spin_unlock_irqrestore(&power_ctrl_lock, flags); return true; } if (force_on == false) goto out_false; /* Ok power up needed */ ret = gma_resume_pci(dev->pdev); if (ret == 0) { psb_irq_preinstall(dev); psb_irq_postinstall(dev); pm_runtime_get(&dev->pdev->dev); dev_priv->display_count++; spin_unlock_irqrestore(&power_ctrl_lock, flags); return true; } out_false: spin_unlock_irqrestore(&power_ctrl_lock, flags); return false; } /** * gma_power_end - end use of power * @dev: Our DRM device * * Indicate that one of our gma_power_begin() requested periods when * the diplay island power is needed has completed. */ void gma_power_end(struct drm_device *dev) { struct drm_psb_private *dev_priv = dev->dev_private; unsigned long flags; spin_lock_irqsave(&power_ctrl_lock, flags); dev_priv->display_count--; WARN_ON(dev_priv->display_count < 0); spin_unlock_irqrestore(&power_ctrl_lock, flags); pm_runtime_put(&dev->pdev->dev); } int psb_runtime_suspend(struct device *dev) { return gma_power_suspend(dev); } int psb_runtime_resume(struct device *dev) { return gma_power_resume(dev); } int psb_runtime_idle(struct device *dev) { struct drm_device *drmdev = pci_get_drvdata(to_pci_dev(dev)); struct drm_psb_private *dev_priv = drmdev->dev_private; if (dev_priv->display_count) return 0; else return 1; } int gma_power_thaw(struct device *_dev) { return gma_power_resume(_dev); } int gma_power_freeze(struct device *_dev) { return gma_power_suspend(_dev); } int gma_power_restore(struct device *_dev) { return gma_power_resume(_dev); }