/*
* Copyright (C) 2008 Extreme Engineering Solutions, Inc.
* Based on MPC8572DS device tree from Freescale Semiconductor, Inc.
*
* XPedite5330 3U CompactPCI module based on MPC8572E
*
* This is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
/ {
model = "xes,xpedite5330";
compatible = "xes,xpedite5330", "xes,MPC8572";
#address-cells = <2>;
#size-cells = <2>;
form-factor = "3U CompactPCI";
boot-bank = <0x0>; /* 0: Primary flash, 1: Secondary flash */
aliases {
ethernet0 = &enet0;
ethernet1 = &enet1;
serial0 = &serial0;
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
pci2 = &pci2;
};
pmcslots {
#address-cells = <1>;
#size-cells = <0>;
pmcslot@0 {
cell-index = <0>;
/*
* boolean properties (true if defined):
* monarch;
* module-present;
*/
};
};
xmcslots {
#address-cells = <1>;
#size-cells = <0>;
xmcslot@0 {
cell-index = <0>;
/*
* boolean properties (true if defined):
* module-present;
*/
};
};
cpci {
/*
* boolean properties (true if defined):
* system-controller;
*/
system-controller;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8572@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
next-level-cache = <&L2>;
};
PowerPC,8572@1 {
device_type = "cpu";
reg = <0x1>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <0>;
clock-frequency = <0>;
next-level-cache = <&L2>;
};
};
memory {
device_type = "memory";
reg = <0x0 0x0 0x0 0x0>; // Filled in by U-Boot
};
localbus@ef005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
reg = <0 0xef005000 0 0x1000>;
interrupts = <19 2>;
interrupt-parent = <&mpic>;
/* Local bus region mappings */
ranges = <0 0 0 0xf8000000 0x8000000 /* CS0: Boot flash */
1 0 0 0xf0000000 0x8000000 /* CS1: Alternate flash */
2 0 0 0xef800000 0x40000 /* CS2: NAND CE1 */
3 0 0 0xef840000 0x40000>; /* CS3: NAND CE2 */
nor-boot@0,0 {
compatible = "amd,s29gl01gp", "cfi-flash";
bank-width = <2>;
reg = <0 0 0x8000000>; /* 128MB */
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Primary user space";
reg = <0x00000000 0x6f00000>; /* 111 MB */
};
partition@6f00000 {
label = "Primary kernel";
reg = <0x6f00000 0x1000000>; /* 16 MB */
};
partition@7f00000 {
label = "Primary DTB";
reg = <0x7f00000 0x40000>; /* 256 KB */
};
partition@7f40000 {
label = "Primary U-Boot environment";
reg = <0x7f40000 0x40000>; /* 256 KB */
};
partition@7f80000 {
label = "Primary U-Boot";
reg = <0x7f80000 0x80000>; /* 512 KB */
read-only;
};
};
nor-alternate@1,0 {
compatible = "amd,s29gl01gp", "cfi-flash";
bank-width = <2>;
//reg = <0xf0000000 0x08000000>; /* 128MB */
reg = <1 0 0x8000000>; /* 128MB */
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "Secondary user space";
reg = <0x00000000 0x6f00000>; /* 111 MB */
};
partition@6f00000 {
label = "Secondary kernel";
reg = <0x6f00000 0x1000000>; /* 16 MB */
};
partition@7f00000 {
label = "Secondary DTB";
reg = <0x7f00000 0x40000>; /* 256 KB */
};
partition@7f40000 {
label = "Secondary U-Boot environment";
reg = <0x7f40000 0x40000>; /* 256 KB */
};
partition@7f80000 {
label = "Secondary U-Boot";
reg = <0x7f80000 0x80000>; /* 512 KB */
read-only;
};
};
nand@2,0 {
#address-cells = <1>;
#size-cells = <1>;
/*
* Actual part could be ST Micro NAND08GW3B2A (1 GB),
* Micron MT29F8G08DAA (2x 512 MB), or Micron
* MT29F16G08FAA (2x 1 GB), depending on the build
* configuration
*/
compatible = "fsl,mpc8572-fcm-nand",
"fsl,elbc-fcm-nand";
reg = <2 0 0x40000>;
/* U-Boot should fix this up if chip size > 1 GB */
partition@0 {
label = "NAND Filesystem";
reg = <0 0x40000000>;
};
};
};
soc8572@ef000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8572-immr", "simple-bus";
ranges = <0x0 0 0xef000000 0x100000>;
bus-frequency = <0>; // Filled out by uboot.
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <12>;
};
ecm@1000 {
compatible = "fsl,mpc8572-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2>;
interrupt-parent = <&mpic>;
};
memory-controller@2000 {
compatible = "fsl,mpc8572-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
};
memory-controller@6000 {
compatible = "fsl,mpc8572-memory-controller";
reg = <0x6000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <18 2>;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8572-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <32>; // 32 bytes
cache-size = <0x100000>; // L2, 1M
interrupt-parent = <&mpic>;
interrupts = <16 2>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
temp-sensor@48 {
compatible = "dallas,ds1631", "dallas,ds1621";
reg = <0x48>;
};
temp-sensor@4c {
compatible = "adi,adt7461";
reg = <0x4c>;
};
cpu-supervisor@51 {
compatible = "dallas,ds4510";
reg = <0x51>;
};
eeprom@54 {
compatible = "atmel,at24c128b";
reg = <0x54>;
};
rtc@68 {
compatible = "stm,m41t00",
"dallas,ds1338";
reg = <0x68>;
};
pcie-switch@70 {
compatible = "plx,pex8518";
reg = <0x70>;
};
gpio1: gpio@18 {
compatible = "nxp,pca9557";
reg = <0x18>;
#gpio-cells = <2>;
gpio-controller;
polarity = <0x00>;
};
gpio2: gpio@1c {
compatible = "nxp,pca9557";
reg = <0x1c>;
#gpio-cells = <2>;
gpio-controller;
polarity = <0x00>;
};
gpio3: gpio@1e {
compatible = "nxp,pca9557";
reg = <0x1e>;
#gpio-cells = <2>;
gpio-controller;
polarity = <0x00>;
};
gpio4: gpio@1f {
compatible = "nxp,pca9557";
reg = <0x1f>;
#gpio-cells = <2>;
gpio-controller;
polarity = <0x00>;
};
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <43 2>;
interrupt-parent = <&mpic>;
dfsrr;
};
dma@c300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
reg = <0xc300 0x4>;
ranges = <0x0 0xc100 0x200>;
cell-index = <1>;
dma-channel@0 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <76 2>;
};
dma-channel@80 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <77 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <78 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <79 2>;
};
};
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
reg = <0x21300 0x4>;
ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <20 2>;
};
dma-channel@80 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8572-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <23 2>;
};
};
/* eTSEC 1 */
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "sgmii";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@1 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <0x1>;
};
phy1: ethernet-phy@2 {
interrupt-parent = <&mpic>;
interrupts = <8 1>;
reg = <0x2>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
/* eTSEC 2 */
enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "sgmii";
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
/* UART0 */
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
/* UART1 */
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities block
compatible = "fsl,mpc8572-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
msi@41600 {
compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
reg = <0x41600 0x80>;
msi-available-ranges = <0 0x100>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0
0xe4 0
0xe5 0
0xe6 0
0xe7 0>;
interrupt-parent = <&mpic>;
};
crypto@30000 {
compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
"fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <45 2 58 2>;
interrupt-parent = <&mpic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0x9fe>;
fsl,descriptor-types-mask = <0x3ab0ebf>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
gpio0: gpio@f000 {
compatible = "fsl,mpc8572-gpio";
reg = <0xf000 0x1000>;
interrupts = <47 2>;
interrupt-parent = <&mpic>;
#gpio-cells = <2>;
gpio-controller;
};
gpio-leds {
compatible = "gpio-leds";
heartbeat {
label = "Heartbeat";
gpios = <&gpio0 4 1>;
linux,default-trigger = "heartbeat";
};
yellow {
label = "Yellow";
gpios = <&gpio0 5 1>;
};
red {
label = "Red";
gpios = <&gpio0 6 1>;
};
green {
label = "Green";
gpios = <&gpio0 7 1>;
};
};
/* PME (pattern-matcher) */
pme@10000 {
compatible = "fsl,mpc8572-pme", "pme8572";
reg = <0x10000 0x5000>;
interrupts = <57 2 64 2 65 2 66 2 67 2>;
interrupt-parent = <&mpic>;
};
tlu@2f000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x2f000 0x1000>;
interrupts = <61 2>;
interrupt-parent = <&mpic>;
};
tlu@15000 {
compatible = "fsl,mpc8572-tlu", "fsl_tlu";
reg = <0x15000 0x1000>;
interrupts = <75 2>;
interrupt-parent = <&mpic>;
};
};
/* PCI Express controller 3 - CompactPCI bus via PEX8112 bridge */
pci0: pcie@ef008000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0 0xef008000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x10000000
0x1000000 0x0 0x00000000 0 0xe9000000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <24 2>;
interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &mpic 0x0 0x1
0x0 0x0 0x0 0x2 &mpic 0x1 0x1
0x0 0x0 0x0 0x3 &mpic 0x2 0x1
0x0 0x0 0x0 0x4 &mpic 0x3 0x1
>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x02000000 0x0 0xe0000000
0x02000000 0x0 0xe0000000
0x0 0x10000000
0x01000000 0x0 0x0
0x01000000 0x0 0x0
0x0 0x100000>;
};
};
/* PCI Express controller 2, PMC module via PEX8112 bridge */
pci1: pcie@ef009000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0 0xef009000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x10000000
0x1000000 0x0 0x00000000 0 0xe8800000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <25 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
0x0 0x0 0x0 0x1 &mpic 0x4 0x1
0x0 0x0 0x0 0x2 &mpic 0x5 0x1
0x0 0x0 0x0 0x3 &mpic 0x6 0x1
0x0 0x0 0x0 0x4 &mpic 0x7 0x1
>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x10000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
/* PCI Express controller 1, XMC P15 */
pci2: pcie@ef00a000 {
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0 0xef00a000 0 0x1000>;
bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x40000000
0x1000000 0x0 0x00000000 0 0xe8000000 0x0 0x10000>;
clock-frequency = <33333333>;
interrupt-parent = <&mpic>;
interrupts = <26 2>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 */
0x0 0x0 0x0 0x1 &mpic 0x0 0x1
0x0 0x0 0x0 0x2 &mpic 0x1 0x1
0x0 0x0 0x0 0x3 &mpic 0x2 0x1
0x0 0x0 0x0 0x4 &mpic 0x3 0x1
>;
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x40000000
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x100000>;
};
};
};