/*
* SBC8548 Device Tree Source
*
* Copyright 2007 Wind River Systems Inc.
*
* Paul Gortmaker (see MAINTAINERS for contact information)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/{
soc8548@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
ranges = <0x00000000 0xe0000000 0x00100000>;
bus-frequency = <0>;
compatible = "simple-bus";
ecm-law@0 {
compatible = "fsl,ecm-law";
reg = <0x0 0x1000>;
fsl,num-laws = <10>;
};
ecm@1000 {
compatible = "fsl,mpc8548-ecm", "fsl,ecm";
reg = <0x1000 0x1000>;
interrupts = <17 2>;
interrupt-parent = <&mpic>;
};
memory-controller@2000 {
compatible = "fsl,mpc8548-memory-controller";
reg = <0x2000 0x1000>;
interrupt-parent = <&mpic>;
interrupts = <0x12 0x2>;
};
L2: l2-cache-controller@20000 {
compatible = "fsl,mpc8548-l2-cache-controller";
reg = <0x20000 0x1000>;
cache-line-size = <0x20>; // 32 bytes
cache-size = <0x80000>; // L2, 512K
interrupt-parent = <&mpic>;
interrupts = <0x10 0x2>;
};
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <0x2b 0x2>;
interrupt-parent = <&mpic>;
dfsrr;
};
i2c@3100 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <1>;
compatible = "fsl-i2c";
reg = <0x3100 0x100>;
interrupts = <0x2b 0x2>;
interrupt-parent = <&mpic>;
dfsrr;
};
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8548-dma", "fsl,eloplus-dma";
reg = <0x21300 0x4>;
ranges = <0x0 0x21100 0x200>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8548-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x0 0x80>;
cell-index = <0>;
interrupt-parent = <&mpic>;
interrupts = <20 2>;
};
dma-channel@80 {
compatible = "fsl,mpc8548-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x80 0x80>;
cell-index = <1>;
interrupt-parent = <&mpic>;
interrupts = <21 2>;
};
dma-channel@100 {
compatible = "fsl,mpc8548-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x100 0x80>;
cell-index = <2>;
interrupt-parent = <&mpic>;
interrupts = <22 2>;
};
dma-channel@180 {
compatible = "fsl,mpc8548-dma-channel",
"fsl,eloplus-dma-channel";
reg = <0x180 0x80>;
cell-index = <3>;
interrupt-parent = <&mpic>;
interrupts = <23 2>;
};
};
enet0: ethernet@24000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <0>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x24000 0x1000>;
ranges = <0x0 0x24000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-mdio";
reg = <0x520 0x20>;
phy0: ethernet-phy@19 {
interrupt-parent = <&mpic>;
interrupts = <0x6 0x1>;
reg = <0x19>;
};
phy1: ethernet-phy@1a {
interrupt-parent = <&mpic>;
interrupts = <0x7 0x1>;
reg = <0x1a>;
};
tbi0: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
enet1: ethernet@25000 {
#address-cells = <1>;
#size-cells = <1>;
cell-index = <1>;
device_type = "network";
model = "eTSEC";
compatible = "gianfar";
reg = <0x25000 0x1000>;
ranges = <0x0 0x25000 0x1000>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
interrupt-parent = <&mpic>;
tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
mdio@520 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,gianfar-tbi";
reg = <0x520 0x20>;
tbi1: tbi-phy@11 {
reg = <0x11>;
device_type = "tbi-phy";
};
};
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4500 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <0x2a 0x2>;
interrupt-parent = <&mpic>;
};
serial1: serial@4600 {
cell-index = <1>;
device_type = "serial";
compatible = "fsl,ns16550", "ns16550";
reg = <0x4600 0x100>; // reg base, size
clock-frequency = <0>; // should we fill in in uboot?
interrupts = <0x2a 0x2>;
interrupt-parent = <&mpic>;
};
global-utilities@e0000 { //global utilities reg
compatible = "fsl,mpc8548-guts";
reg = <0xe0000 0x1000>;
fsl,has-rstcr;
};
crypto@30000 {
compatible = "fsl,sec2.1", "fsl,sec2.0";
reg = <0x30000 0x10000>;
interrupts = <45 2>;
interrupt-parent = <&mpic>;
fsl,num-channels = <4>;
fsl,channel-fifo-len = <24>;
fsl,exec-units-mask = <0xfe>;
fsl,descriptor-types-mask = <0x12b0ebf>;
};
mpic: pic@40000 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <2>;
reg = <0x40000 0x40000>;
compatible = "chrp,open-pic";
device_type = "open-pic";
};
};
pci0: pci@e0008000 {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x01 (PCI-X slot) @66MHz */
0x0800 0x0 0x0 0x1 &mpic 0x2 0x1
0x0800 0x0 0x0 0x2 &mpic 0x3 0x1
0x0800 0x0 0x0 0x3 &mpic 0x4 0x1
0x0800 0x0 0x0 0x4 &mpic 0x1 0x1
/* IDSEL 0x11 (PCI, 3.3V 32bit) @33MHz */
0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
0x8800 0x0 0x0 0x4 &mpic 0x1 0x1>;
interrupt-parent = <&mpic>;
interrupts = <0x18 0x2>;
bus-range = <0 0>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00800000>;
clock-frequency = <66000000>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xe0008000 0x1000>;
compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
device_type = "pci";
};
pci1: pcie@e000a000 {
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
/* IDSEL 0x0 (PEX) */
0x0000 0x0 0x0 0x1 &mpic 0x0 0x1
0x0000 0x0 0x0 0x2 &mpic 0x1 0x1
0x0000 0x0 0x0 0x3 &mpic 0x2 0x1
0x0000 0x0 0x0 0x4 &mpic 0x3 0x1>;
interrupt-parent = <&mpic>;
interrupts = <0x1a 0x2>;
bus-range = <0x0 0xff>;
ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0xe2800000 0x0 0x08000000>;
clock-frequency = <33000000>;
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xe000a000 0x1000>;
compatible = "fsl,mpc8548-pcie";
device_type = "pci";
pcie@0 {
reg = <0x0 0x0 0x0 0x0 0x0>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
ranges = <0x02000000 0x0 0xa0000000
0x02000000 0x0 0xa0000000
0x0 0x10000000
0x01000000 0x0 0x00000000
0x01000000 0x0 0x00000000
0x0 0x00800000>;
};
};
};