/*
* Device Tree Source for AMCC Canyonlands (460EX)
*
* Copyright 2008-2009 DENX Software Engineering, Stefan Roese <sr@denx.de>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*/
/dts-v1/;
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "amcc,canyonlands";
compatible = "amcc,canyonlands";
dcr-parent = <&{/cpus/cpu@0}>;
aliases {
ethernet0 = &EMAC0;
ethernet1 = &EMAC1;
serial0 = &UART0;
serial1 = &UART1;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
model = "PowerPC,460EX";
reg = <0x00000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
timebase-frequency = <0>; /* Filled in by U-Boot */
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
next-level-cache = <&L2C0>;
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
};
UIC0: interrupt-controller0 {
compatible = "ibm,uic-460ex","ibm,uic";
interrupt-controller;
cell-index = <0>;
dcr-reg = <0x0c0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
};
UIC1: interrupt-controller1 {
compatible = "ibm,uic-460ex","ibm,uic";
interrupt-controller;
cell-index = <1>;
dcr-reg = <0x0d0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
UIC2: interrupt-controller2 {
compatible = "ibm,uic-460ex","ibm,uic";
interrupt-controller;
cell-index = <2>;
dcr-reg = <0x0e0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
UIC3: interrupt-controller3 {
compatible = "ibm,uic-460ex","ibm,uic";
interrupt-controller;
cell-index = <3>;
dcr-reg = <0x0f0 0x009>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
interrupt-parent = <&UIC0>;
};
SDR0: sdr {
compatible = "ibm,sdr-460ex";
dcr-reg = <0x00e 0x002>;
};
CPR0: cpr {
compatible = "ibm,cpr-460ex";
dcr-reg = <0x00c 0x002>;
};
CPM0: cpm {
compatible = "ibm,cpm";
dcr-access-method = "native";
dcr-reg = <0x160 0x003>;
unused-units = <0x00000100>;
idle-doze = <0x02000000>;
standby = <0xfeff791d>;
};
L2C0: l2c {
compatible = "ibm,l2-cache-460ex", "ibm,l2-cache";
dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */
0x030 0x008>; /* L2 cache DCR's */
cache-line-size = <32>; /* 32 bytes */
cache-size = <262144>; /* L2, 256K */
interrupt-parent = <&UIC1>;
interrupts = <11 1>;
};
plb {
compatible = "ibm,plb-460ex", "ibm,plb4";
#address-cells = <2>;
#size-cells = <1>;
ranges;
clock-frequency = <0>; /* Filled in by U-Boot */
SDRAM0: sdram {
compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
dcr-reg = <0x010 0x002>;
};
CRYPTO: crypto@180000 {
compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto";
reg = <4 0x00180000 0x80400>;
interrupt-parent = <&UIC0>;
interrupts = <0x1d 0x4>;
};
HWRNG: hwrng@110000 {
compatible = "amcc,ppc460ex-rng", "ppc4xx-rng";
reg = <4 0x00110000 0x50>;
};
MAL0: mcmal {
compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
dcr-reg = <0x180 0x062>;
num-tx-chans = <2>;
num-rx-chans = <16>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-parent = <&UIC2>;
interrupts = < /*TXEOB*/ 0x6 0x4
/*RXEOB*/ 0x7 0x4
/*SERR*/ 0x3 0x4
/*TXDE*/ 0x4 0x4
/*RXDE*/ 0x5 0x4>;
};
USB0: ehci@bffd0400 {
compatible = "ibm,usb-ehci-460ex", "usb-ehci";
interrupt-parent = <&UIC2>;
interrupts = <0x1d 4>;
reg = <4 0xbffd0400 0x90 4 0xbffd0490 0x70>;
};
USB1: usb@bffd0000 {
compatible = "ohci-le";
reg = <4 0xbffd0000 0x60>;
interrupt-parent = <&UIC2>;
interrupts = <0x1e 4>;
};
USBOTG0: usbotg@bff80000 {
compatible = "amcc,dwc-otg";
reg = <0x4 0xbff80000 0x10000>;
interrupt-parent = <&USBOTG0>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupts = <0x0 0x1 0x2>;
interrupt-map = </* USB-OTG */ 0x0 &UIC2 0x1c 0x4
/* HIGH-POWER */ 0x1 &UIC1 0x1a 0x8
/* DMA */ 0x2 &UIC0 0xc 0x4>;
};
SATA0: sata@bffd1000 {
compatible = "amcc,sata-460ex";
reg = <4 0xbffd1000 0x800 4 0xbffd0800 0x400>;
interrupt-parent = <&UIC3>;
interrupts = <0x0 0x4 /* SATA */
0x5 0x4>; /* AHBDMA */
};
POB0: opb {
compatible = "ibm,opb-460ex", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0xb0000000 0x00000004 0xb0000000 0x50000000>;
clock-frequency = <0>; /* Filled in by U-Boot */
EBC0: ebc {
compatible = "ibm,ebc-460ex", "ibm,ebc";
dcr-reg = <0x012 0x002>;
#address-cells = <2>;
#size-cells = <1>;
clock-frequency = <0>; /* Filled in by U-Boot */
/* ranges property is supplied by U-Boot */
interrupts = <0x6 0x4>;
interrupt-parent = <&UIC1>;
nor_flash@0,0 {
compatible = "amd,s29gl512n", "cfi-flash";
bank-width = <2>;
reg = <0x00000000 0x00000000 0x04000000>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "kernel";
reg = <0x00000000 0x001e0000>;
};
partition@1e0000 {
label = "dtb";
reg = <0x001e0000 0x00020000>;
};
partition@200000 {
label = "ramdisk";
reg = <0x00200000 0x01400000>;
};
partition@1600000 {
label = "jffs2";
reg = <0x01600000 0x00400000>;
};
partition@1a00000 {
label = "user";
reg = <0x01a00000 0x02560000>;
};
partition@3f60000 {
label = "env";
reg = <0x03f60000 0x00040000>;
};
partition@3fa0000 {
label = "u-boot";
reg = <0x03fa0000 0x00060000>;
};
};
cpld@2,0 {
compatible = "amcc,ppc460ex-bcsr";
reg = <2 0x0 0x9>;
};
ndfc@3,0 {
compatible = "ibm,ndfc";
reg = <0x00000003 0x00000000 0x00002000>;
ccr = <0x00001000>;
bank-settings = <0x80002222>;
#address-cells = <1>;
#size-cells = <1>;
nand {
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x00000000 0x00100000>;
};
partition@100000 {
label = "user";
reg = <0x00000000 0x03f00000>;
};
};
};
};
UART0: serial@ef600300 {
device_type = "serial";
compatible = "ns16550";
reg = <0xef600300 0x00000008>;
virtual-reg = <0xef600300>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC1>;
interrupts = <0x1 0x4>;
};
UART1: serial@ef600400 {
device_type = "serial";
compatible = "ns16550";
reg = <0xef600400 0x00000008>;
virtual-reg = <0xef600400>;
clock-frequency = <0>; /* Filled in by U-Boot */
current-speed = <0>; /* Filled in by U-Boot */
interrupt-parent = <&UIC0>;
interrupts = <0x1 0x4>;
};
IIC0: i2c@ef600700 {
compatible = "ibm,iic-460ex", "ibm,iic";
reg = <0xef600700 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x2 0x4>;
#address-cells = <1>;
#size-cells = <0>;
rtc@68 {
compatible = "stm,m41t80";
reg = <0x68>;
interrupt-parent = <&UIC2>;
interrupts = <0x19 0x8>;
};
sttm@48 {
compatible = "ad,ad7414";
reg = <0x48>;
interrupt-parent = <&UIC1>;
interrupts = <0x14 0x8>;
};
};
IIC1: i2c@ef600800 {
compatible = "ibm,iic-460ex", "ibm,iic";
reg = <0xef600800 0x00000014>;
interrupt-parent = <&UIC0>;
interrupts = <0x3 0x4>;
};
GPIO0: gpio@ef600b00 {
compatible = "ibm,ppc4xx-gpio";
reg = <0xef600b00 0x00000048>;
gpio-controller;
};
ZMII0: emac-zmii@ef600d00 {
compatible = "ibm,zmii-460ex", "ibm,zmii";
reg = <0xef600d00 0x0000000c>;
};
RGMII0: emac-rgmii@ef601500 {
compatible = "ibm,rgmii-460ex", "ibm,rgmii";
reg = <0xef601500 0x00000008>;
has-mdio;
};
TAH0: emac-tah@ef601350 {
compatible = "ibm,tah-460ex", "ibm,tah";
reg = <0xef601350 0x00000030>;
};
TAH1: emac-tah@ef601450 {
compatible = "ibm,tah-460ex", "ibm,tah";
reg = <0xef601450 0x00000030>;
};
EMAC0: ethernet@ef600e00 {
device_type = "network";
compatible = "ibm,emac-460ex", "ibm,emac4sync";
interrupt-parent = <&EMAC0>;
interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
/*Wake*/ 0x1 &UIC2 0x14 0x4>;
reg = <0xef600e00 0x000000c4>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <0>;
mal-rx-channel = <0>;
cell-index = <0>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <0>;
tah-device = <&TAH0>;
tah-channel = <0>;
has-inverted-stacr-oc;
has-new-stacr-staopc;
};
EMAC1: ethernet@ef600f00 {
device_type = "network";
compatible = "ibm,emac-460ex", "ibm,emac4sync";
interrupt-parent = <&EMAC1>;
interrupts = <0x0 0x1>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = </*Status*/ 0x0 &UIC2 0x11 0x4
/*Wake*/ 0x1 &UIC2 0x15 0x4>;
reg = <0xef600f00 0x000000c4>;
local-mac-address = [000000000000]; /* Filled in by U-Boot */
mal-device = <&MAL0>;
mal-tx-channel = <1>;
mal-rx-channel = <8>;
cell-index = <1>;
max-frame-size = <9000>;
rx-fifo-size = <4096>;
tx-fifo-size = <2048>;
rx-fifo-size-gige = <16384>;
phy-mode = "rgmii";
phy-map = <0x00000000>;
rgmii-device = <&RGMII0>;
rgmii-channel = <1>;
tah-device = <&TAH1>;
tah-channel = <1>;
has-inverted-stacr-oc;
has-new-stacr-staopc;
mdio-device = <&EMAC0>;
};
};
PCIX0: pci@c0ec00000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pcix-460ex", "ibm,plb-pcix";
primary;
large-inbound-windows;
enable-msi-hole;
reg = <0x0000000c 0x0ec00000 0x00000008 /* Config space access */
0x00000000 0x00000000 0x00000000 /* no IACK cycles */
0x0000000c 0x0ed00000 0x00000004 /* Special cycles */
0x0000000c 0x0ec80000 0x00000100 /* Internal registers */
0x0000000c 0x0ec80100 0x000000fc>; /* Internal messaging registers */
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 0 to 0x3f */
bus-range = <0x0 0x3f>;
/* All PCI interrupts are routed to ext IRQ 2 -> UIC1-0 */
interrupt-map-mask = <0x0 0x0 0x0 0x0>;
interrupt-map = < 0x0 0x0 0x0 0x0 &UIC1 0x0 0x8 >;
};
PCIE0: pciex@d00000000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
primary;
port = <0x0>; /* port number */
reg = <0x0000000d 0x00000000 0x20000000 /* Config space access */
0x0000000c 0x08010000 0x00001000>; /* Registers */
dcr-reg = <0x100 0x020>;
sdr-base = <0x300>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 40 to 0x7f */
bus-range = <0x40 0x7f>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &UIC3 0xc 0x4 /* swizzled int A */
0x0 0x0 0x0 0x2 &UIC3 0xd 0x4 /* swizzled int B */
0x0 0x0 0x0 0x3 &UIC3 0xe 0x4 /* swizzled int C */
0x0 0x0 0x0 0x4 &UIC3 0xf 0x4 /* swizzled int D */>;
};
PCIE1: pciex@d20000000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-460ex", "ibm,plb-pciex";
primary;
port = <0x1>; /* port number */
reg = <0x0000000d 0x20000000 0x20000000 /* Config space access */
0x0000000c 0x08011000 0x00001000>; /* Registers */
dcr-reg = <0x120 0x020>;
sdr-base = <0x340>;
/* Outbound ranges, one memory and one IO,
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x0 0x80000000>;
/* This drives busses 80 to 0xbf */
bus-range = <0x80 0xbf>;
/* Legacy interrupts (note the weird polarity, the bridge seems
* to invert PCIe legacy interrupts).
* We are de-swizzling here because the numbers are actually for
* port of the root complex virtual P2P bridge. But I want
* to avoid putting a node for it in the tree, so the numbers
* below are basically de-swizzled numbers.
* The real slot is on idsel 0, so the swizzling is 1:1
*/
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &UIC3 0x10 0x4 /* swizzled int A */
0x0 0x0 0x0 0x2 &UIC3 0x11 0x4 /* swizzled int B */
0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */
0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>;
};
MSI: ppc4xx-msi@C10000000 {
compatible = "amcc,ppc4xx-msi", "ppc4xx-msi";
reg = < 0xC 0x10000000 0x100>;
sdr-base = <0x36C>;
msi-data = <0x00000000>;
msi-mask = <0x44440000>;
interrupt-count = <3>;
interrupts = <0 1 2 3>;
interrupt-parent = <&UIC3>;
#interrupt-cells = <1>;
#address-cells = <0>;
#size-cells = <0>;
interrupt-map = <0 &UIC3 0x18 1
1 &UIC3 0x19 1
2 &UIC3 0x1A 1
3 &UIC3 0x1B 1>;
};
};
};